Re: Satellite A350 - Mute button, read DVDs, break do not work

Similar Questions

• Satellite L500 - 1CQ PSLS0E - CD/DVD drive does not work - driver problem?

  Hello

  My DVD player does not work.

  There is power to it. The engine turns when I eject and reinsert. Troubleshooting Control Panel for the equipment and devices said it is a driver problem, but cannot fix it. Problem with the driver.

  I reinstalled it from the Toshiba site.
  It records in the right place?
  I am Windows 7 64 bit and chose the right driver for it.

  Should I use the 64-bit?
  I have 3 MB of RAM which was the spec when bought.

  If I wanted to change to 32 bit how you take you without the CD/DVD drive?
  Is there any point in doing this?

  Thank you

  Richard

  Hello

  To be honest I m a bit confused.
  You are not able to boot from THE disks; Windows disk, disk recovery, disk Linux?

  If it of the case, then it means that your CD/DVD drive is faulty.
  Why? Because the CD/DVD drive is recognized and controlled by the BIOS when booting from CD or DVD.

  When the Windows operating system has started, the CD/DVD drive must use the Microsoft common driver which is part of the Windows operating system.
  This means that you n t need to install ALL the drivers in order to get the job of CD/DVD.

  If you can boot from any disk, but if the CD/DVD drive is not recognized by MY computer, then I recommend this:
  http://support.Microsoft.com/kb/270008/en-us

  Before you remove the upper and lower registry filters, remove the CD/DVD drive in Device Manager and then go into the registry and remove the filters. Restart the unit.

  Good luck

• Satellite A60-772: SD - R6112 DVD - RW is not working properly

  Hello

  I bought a Satellite A60 772 in September of last year. His Player DVD - RW SD - R6112 worked well upward until March 2005, some time; However, I only used to burn CD - R and CD - RW. Then all about March, I used it maybe twice to burn on DVD - RW using the RecordNow! supplied software.

  There is no problem - so - but shortly after the player refuses to detect even the CD - RW and DVD - RW. I can now use only of the CD - R with it (have not checked with DVD-R). Since then, I have uninstalled and reinstalled several times and even reinstalled once the operating system (e.g. Windows XP Home Edition). I also updated the BIOS about a month ago. Still nothing.

  -Someone - had a similar problem? And if you also have an idea how to solve this problem?

  Hello

  If there is the same situation after the recovery process, I assume that there is some malfunction of the equipment. All that you have done is just. I think the warranty is still valid and the best solution is to contact the Service of your country partner and let check the drive.

  Maybe the reader must be exchanged.

• Mute button DV7 quick launch is not working properly. He puts the speakers muted but don't turn yellow.

  Hello everyone.  This is my first post on this forum.

  I have a Pavilion dv7.  Since the beginning (Vista) the QL Mute button wouldn't change to orange when the speakers muted.  I've upgraded to Windows 7 and it still doesn't work.  At one point HP automatically suggested an update of a certain type.  Installed and the button worked.  My hard drive crashed and I just installed a new updated one, day of Vista to W7 once again, done all updates offered.

  But the same problem is back!

  Does anyone know what I need to update to make it work?

  Thanks DP - K,.

  I solved it by installing ' HP full support ", ran the" Tune up"and by installing recommended drivers."  The problem has been fixed, but there was no mention of the QLB' in one of the names of driver updated!

  Sorry, I don't have to try your solution, I'm sure this would have worked too.

  Thanks again for your response.

  GGY

• Satellite A110-275: movies on DVD - R do not work

  Hi everyone I had a problem.

  A couple of weeks, I installed Vista on my laptop, to find every time that I burned a DVD movie, it would not properly play in my DVD player. So I thought it was a problem of Vista compatibility. So I reinstalled Windows XP to find this film now jumping when burned under Windows XP.

  I was told to change my media, so I still have no chance of jumps always.

  This is were I get confused, I was beginning to think that I have a problem with my DVD - RW, but if I burn to a DVD + RW Games movies fine burning on CD - R for music high etc all play very well it just seem to be my I can not burn to DVD - R. Now, I have been using this media for so long, I forgot how long it was to tell the truth.

  Any help what so ever on this would be appreciated with gratitude that I get desperate I'm even ready to give a little money if they can solve this problem I have a lot of holiday video that I need to get my hard drive.

  Last I know my holidays have been authorized and compressed in DVD format very well because he will play very well on a DVD - RW

  Also my DVD player is fine as I've tried movies in 2 other players

  Thanks for any help

  Hello

  > I'm even ready to give a little money if they can solve this problem

  : D I put t want your money it's better that you will be buying a new drive ;)

  Hmm, maybe there is something wrong with the lens of the drive.
  If the lens is unable to correctly calibrate the reader cannot read or write media.

  Try to gently clean the lens maybe it helps.

• Satellite Pro A200 series - CD/DVD-rw does not work

  I've had the laptop for a few months and it's great but now I try to add documents and music on CD or DVD and it will not write. The machine can play DVD +/-R/RW and CD.

  I have tried both DVD + RW is simply not found and the CD - RW try to write, but then the operation cannot have place towards the end of the process it says it cannot be completed.

  Any advice?
  Drives running on my desktop drives are very good.

  Hi Rebecca

  In most cases, these CD/DVD burning issues are related to mediums is not compatible.
  You should know that not all of the CDs or DVDs of different manufacturers are compatible and supported
  I would recommend so test different CD and DVD.

  What burning software do you use?
  I use the program Nero Burning Rom. It of great and supports many useful features. This software tested the CD/DVD drive and controls and sets the best burning speed.
  Sometimes it s useful to run these tests to ensure the best combustion parameters.

  But you question might be linked to the failure of hardware too.
  Sometimes the reader cannot process a CD or a DVD because the lens can not calibrate correctly. In this case, the disk must be replaced :(

  So finally I recommend that you check the different CD & DVD, and if the problem persists, contact the ASP in your country for a control.

  Bye and good luck

• Portable Satellite 1800-750 cannot read DVDs that require files avi (codec)

  my laptop satellite S1800-750 cannot read DVDs that require avi (codec) files. l have updated dvd drivers and upgrades of my multimedia player of series 10, but nothing helped. I need emergency aid.

  Hello

  I suggest, that it can not ONLY play .avi files. Am I wrong?
  In this case, you need additional codecs.
  This has nothing to do with the DVD drivers or firmware.
  Check the internet for the codec. I'm sure you will find a lot of info if you want to google a bit.

  Good luck

• Satellite 2430: CD/DVD drive does not work - i/o error

  Hello all Toshiba people.i have recently bought a Toshiba Satellite 2430 for a very good price. One thing the carpet * a DVD - ram Uj - 810 drive does not work when I put in any type of cd or dvd, I get this error
  F:\ is not accessible.
  The request could not be performed because of an i/o error.

  I talked to my local computer Wizz and does everything that he suggested to the letter and still the same problem. He suggested updating the bios drivers and the only way to do that is on a disk drive that she cannot take the an or a CD or dvd drive is not working. Can you please help me!

  Begging you a lot
  Michael Borger

  In my view BIOS update will not change.
  I assume that the reader has worked in the past with the same BIOS version
  It is a drive hardware problem or some registry keys are corrupt.

  I think that it s a hardware malfunction may be a matter of lenses.
  But try this;
  Remove the drive from Device Manager and shut the laptop computer. After restarting again the operating system should recognize the drive again. Then you can check the functionality.

  Otherwise, you can remove the disk from the laptop, and then start the laptop without the drive. Then stop the laptop, put the drive in the notebook and start over.
  The firmware should again loads.

  But if these procedures help t, I don t see it differently as for replace the drive

• Satellite P25-S520 - DVD player does not work properly

  Difficulty of DVD player or buy the external drive

  My DVD player does not work properly, in fact it can never work properly. Recently, I tried to back up my PC on a DVD using Norton 360. Norton did not recognize that the DVD was present. Then I tried to write a text file on a DVD and was a failure. DVD + R and DVD-R media were found to be (Maxwell 16 X).

  I could have probably lived with this however, I received a copy of Dragon NaturallySpeaking version 10 on a CD and my Toshiba would not recognize it. I tried the CD in my laptop nearby and it was recognized.

  An attempt to update the driver has also fails.

  I was able to copy a CD of music last night so that at least works properly.

  Does anyone know how can I fix? The important part is to be able to load my new program.

  Research on some forums I found that other people have had problems with the Pioneer drive. If the drive can't be fixed, I'm not adverse to buying an external DVD drive. Unfortunately, where I live there is no brick and mortar stores selling external drives and I prefer to avoid the hassle of getting a drive online and discovering that it does not work with my Toshiba. Can someone suggest an external USB drive that will read and write CD and DVD and is certain to be compatible with my Toshiba?

  Thanks for any help,
  Humbaba3000BC

  Satellite P25-S520
  PIONEER DVD - RW DVR-K12D
  Driver provider: Microsoft
  Driver date: 01/07/2001
  Driver version: 5.1.2535.0
  Digital signer: Microsoft Windows Publisher

  Any external USB CD/DVD drive will be compatible with your laptop.

  However, you won't be able to boot from CD (run recovery for example) If you are using an external drive.

  So, your best option would be to replace the internal drive with a Toshiba drive designed for the laptop. Call an ASP and request a quote.

• Satellite A200 - 23P - mechanic of DVD - rom does not

  I'm sorry for my English in advance this topic! -Thank you

  I have a very big problem with my engraver of DVD (RM).
  I bought SAT A200 - 23P three weeks ago.
  The Win VISTA operating system has been installed. DVD - rom worked well.

  If I have installed Win XP to the second partition on my HARD drive (to install the disk with driver for sata drive in nlite) and installed all the drivers and utilities for Toshiba laptop, I found that my DVD-rom is not working while I press eject button.

  Mechanic of DVD is not responding to eject in XP and not even in the BIOS!
  It is interesting, mechanic DVD is the detection in BIOS, detects in XP, XP operating system votes - mechanic to the DVD works properly - its fable.

  However, if I have installed XP on the second partition, Win Vista does not load :(
  I don't have a second chance for second selection (Vista and XP).
  I now have XP only, even if Vista is on the first partition - I didn't delete it.

  Do you think that the DVD-rom is HW or SW problem?
  I think that, given that the DVD-rom does not in the BIOS - HW error.

  But is very strange, if I install XP from mechanic to the DVD and then close is, DVD - rom does not...:)

  If I manually open and insert the CD, the DVD does not (diode led no blink, just if I turn off the computer, led blinked once).

  PLS help me someone-

  Thank you!

  Hi Michal

  Your question is very strange, I mean the number of CD/DVD drive

  The fact is that the readers of CD/DVD eject function functions should any operating system has been installed on your laptop. It has nothing to do with your software on the HARD drive.

  So I wonder why the eject button works with Vista and not XP preinstalled OS?  :|

  My only plausible explanation is that sometimes there is a bad connection between the laptop and the drive. However the problem could be related to the hardware problem too

  As you see it s not easy to say what's wrong exactly, we can only speculate.

  Now some details about your installation of OS double.

  You cannot choose between Windows XP and Vista because Vista boot manager was obliterated during the installation of Win XP.
  This happened to me also. I installed Win XP on my Satellite and could not start Vista.

  The solution was simple; I used another original DVD of Vista (from my friend) and booted from this DVD. Vista has renewed the Boot Manager, and then I was able to boot Vista.

  Then I downloaded the tool called Easy BCD.
  This tool can change the Vista Boot Manager settings. I've edited and inserted a new Windwos XP OS entry.

  That s it!

• Satellite A500 and Win8 - DVD player does not work

  I upgraded my Satellite A500-17 X to Windows 8, but now my DVD drive does not work.

  Anyone know how I can get it working again.
  Thank you.
  Cumbria

  Solution here:
  http://www.CSD.Toshiba.com/cgi-bin/t...e&soID=3516888

  * Uninstall Toshiba programs: *.
  • TOSHIBA Recovery Media Creator
  • TOSHIBA Disc Creator
  Then restart your PC using the power--> reboot option in Windows 8.
  Your CD/DVD should be available now.
  To help uninstall these programs, follow the instructions below

  * To uninstall a program or application: *.
  1. on the home screen, type Control Panel
  2. select Programs--> uninstall a program
  3. find two programs listed above and uninstall these applications
  4. once the application programs are uninstalled, restart your computer using the power--> reboot option in Windows 8
  5. when the power to the computer on the CD/DVD drive should be available
  If the CD/DVD drive still does not appear, follow the instructions below to uninstall a device driver

  * To uninstall a device driver: *.
  1. on the home screen, type Device Manager
  2. Select Device Manager > CD-ROM/DVD-ROM drives > right click on the displayed device > select uninstall.
  3. once the driver uninstall, shut down your computer by using the method of restart. The driver will be installed automatically when the computer restarts.
  4. the CD/DVD drive should now be shown.

• Satellite C55 - A - dvd/cd player not working not - register code 19

  I have a Toshiba Satellite C55 - A, but my cd/DVD drive does not work.
  The DVD is very good as it works on another computer. I tried to follow the advice given in another forum.

  The only information on the computer is the Device Manager - under CD-ROM/DVD-ROM readers - the TSSTcorp CVVD SU-208DB message if I double click on it I get this message under the status of device section windows cannot start this hardware because its information of configuration (in the registry) is incomplete or damaged (code 19).
  

  Unfortunately, computer tech is not my strong point so please you can help.

  Thank you

  Try to remove filters
  https://support.Microsoft.com/en-us/KB/929461

• On Satellite L500D DVD player does not work - Code 39

  my dvd driver does not work it says driver may be corrupted or missing (code 39) I got it 3 days new

  read here:

  http://APS2.toshiba-tro.de/KB0/TSB7801XL0000R01.htm

• My Dell Desk Top DVD Player does not work. Whenever I have insert the disc and click here to read... I get the message insert' disc Please "."

  What is the faulty drive, or the software that is missing

  Hello

  What happens if you close all programs and then insert the disc?

  -------------------------------------------------------------------------

  If you have problems with CD/DVD drive:

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• I have a computer running VISTA. The CD-ROM/DVD-rom does not work and can not read the CD of the program that I placed in it.

  It won't read a DVD.  It will not read ANY CD or DVD.  I tried 12 different CD/DVD.  This isn't an upgrade to Vista; the computer came "made for Vista" with Vista installed on it.  I had added Nero.  I removed Nero.  I did all the updates. I have not released the driver and reinstalled.  He claims to have the latest driver software, but it won't work.  The computer can see the CD/DVD, but he calls it a 'CDROM '.  It is not the case.  It is a DVD/Cd-RW with Labelflash.

  I did everything suggested that past discussions.  I ran FIXIT program that claims that the drive works properly.  It is not the case.

  I tried to get various programs to recognize.  They cannot see the installed media.

  I uninstalled iTunes.

  Please do not give me the answer of cut-and - paste stock; It does not work.

  Please tell me what to do to make Vista see the media inserted in the CD/DVD-RW drive.

  Thank you.

  Hello

  Well, if you have tried all the usual bugs try this:

  Make a Restore Point:

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  ------------------------------------------------

  Then go to right click on UNINSTALL - - CD/DVD - Device Manager CHECK THE DRIVERS to REMOVE and
  continue.

  Reset.

  Occasionally, install an upgrade or a re - install will fix the problem and of course the drive or other hardware issues
  could be at stake.

  =====================================

  Here's the answer, just in case there is something you don't have, and I start up and down.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable
  or slight corrosion on the contacts (usually for a laptop) and other issues.
  

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===========================================

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
  saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

  You can use another DVD that are not protected but you will need to copy you have the product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.