Satellite P100 - cannot get the CD/DVD writer to work under WXP Pro

Similar Questions

• Re: Satellite L500D - cannot get the optical disc drive to work

  Back again with this problem and this thread began again as it appears the original thread has been 'locked' ~ been awhile so it is aceptable.

  I think that the TS-L633C TSST DVD/CD RW on my system is in fact die slowly, now I can not yet use Toshiba DVD PLAYER to watch DVDs. See http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=204206#204206 for the story.

  Using the windows tool "FixIt" on a blank DVD got all green ticks OK but when I went to play DVDs ~ nothing!

  How the reader '' hunt '' when I put any DVD in it and then fails, suggests that the reader was not not little by little and I must be looking for a new. Shame really, because I haven't used at all, hence the long time between my responses on this forum.

  So OK, where from here.

  Nearest service center is a 5 hour drive, and I will send this laptop for my financial and other stuff done busy resourses is more allow me to simply replace this system and start from scratch.

  I'm ready to buy another drive, but cannot locate any online (new) and I am not aware if there are other brands / types which would be appropriate.

  Toshiba Satellite L500D-PSLKOA-00U009 - TSST TS-L633C DVD/CD RW

  Any ideas anyone?

  To be honest, the situation is strange to me, and I think that you spent too long with all this.

  In my opinion, you have to manage fast. The fist issue is: either defective or not ODD?
  The reasons why it doesn't work with a Toshiba DVD player is not relevant at all. You can test it with VLC media player to see how it works.

  So I recommend you to follow:
  You should not change your preinstalled operating system that you use for work or anything else. Try to get another HARD drive. Swap and install the OS by using recovery disc. Test the functionality of the WEIRD with the settings to be sure that the problem persists or not.

  In the end, if you are willing to trade the player s check Manual of use and you will be find the list of all compatible optical disc readers you can use with your model of laptop.

• Cannot get my CD/DVD player to work

  Cannot get my CD/DVD drive to work because be adjusted back to IE8, it says driver or network connection is not available what to do I please

  Hello

  Try the microsoft 'fix - it' for your problem below

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  and read this information too

  http://support.Microsoft.com/kb/982116/en-us

• Try to get the HD-DVD player to work on the Satellite P100-463

  Hello world.
  I bought this baby the weekend and since I am struggeling trying to get HD-DVDs to work on it. I added the HD_DVD xbox 360 drive, but Power DVD Software Advisor continues to say that the graphic card 9Geforce Go 7900) drivers must be updated to read HD-DVD content. Now, there is no available such as newer driver installed (84.0?)

  Can someone please advise if the card supports protection hdcp anyway? Maybe my problem is another source.
  Thanks for the tips.

  Wait do you use player designed for the Xbox in the Satellite P100?
  Hmm, I m surprised that this device is compatible with the Toshiba laptop.
  Anyway, as far as I know you need a special DVD player to play and watch HD-DVD on the laptop.
  A simple WinDVD does not support the new HD-DVD.

  By the way: I know a Toshiba model that shipped with the HD_DVD drive.
  It was a Qosmio G30 DVD HD model.
  I found a new Nvidia GeForce Go7600 8.3.2.7 Version graphics card driver update in the download section of driver on the Toshiba site
  But I put t know if it s compatible with your card...

• Satellite P100 - cannot delete the data from CD - RW disks

  I have a laptop Toshiba Satellite P100.

  According to the user manual it says:
  You cannot delete partially all the data written to a CD - RW

  I thought the idea of using a CD - RW so you could delete everything that you wanted to and use this part of the disc again and again.

  Can someone explain?

  I didn t find this info in the user manual and if you burned a few data on the CD - RW disks, then it should be possible to format this CD - RW by using a tool like Nero Burning ROM third 3rd for example.

  I've done several times using Nero and still managed

• Satellite L650 cannot get the Gigabit connection to switch

  I tried to connect to the Netgear gs108 gigabit switch but cannot get a connection of 100 Mb. have updated drivers Atheros AR8152 version 1.0.0.26 Win7 64 bit running but still no go.

  All ideas

  Thank you Rich

  Hey that's great that you fixed the problem yourself!

  If you have other questions you're welcome in the forum :)

• After dismantling Satellite A60 cannot detect the CD/DVD drive

  Hello

  I opened my laptop to clean-up and it was the first time that I never opened a laptop. Messed up at the opening of the cd/dvd drive.
  Instead of just pulling out, I started its opening screw but quickly realized that this is not the right way. So I took it out. Rest of the disassembly procedure went well and I assembled it back but he little silver r 2 bands and a small source, which I'm sure that belongs to the CD player and I couldn't adapt it.
  And I don't know how it fits.
  The computer does not detect the drive. Although I can open it by clicking on the Open button, then he hang out by sharp object. (The light will blink showing the power exists in)

  The second thing is the microphone. I've never used until last week, but my voice is going through. The system does not detect any microphone.

  Help appreciated

  Hello

  On this path, it is not easy to say what is the problem with CD/DVD player. Are there signs of the CD/DVD drive in Device Manager or the drive is not displayed in Windows Explorer?

  How did you test mic? Try it with the tape recorder for windows. So you can test the functionality of the mic on the easiest way.

• Satellite L350 - cannot get the keyboard to work with Vista Home Premium

  I just reinstalled Vista Home Premium 32 bit but can not get the keyboard works. I tried to connect an external keyboard with the same results. I checked the disk manager that says that the driver is working OK I wonder if it could be a problem of system or a hardware problem.

  Any help would be welcome

  Jim

  Try the external USB keyboard.
  If it works correctly, then the internal keyboard works bad and must be replaced.

• Cannot get the cd/dvd driver for CD playback

  Hiya

  Earlier this year, my laptop has been infected by viruses, malware, etc. I used the program Spyware Doctor to remove any infections, but so many files and programs are removed.

  On the Device Manager CD-ROM/DVD-ROM driver TSSTcorp DVD +-RW TS - L632H ATA Device ended up having a typical yellow mark next to it and the cd player would not read cds or dvds. Somehow however his custom 'fixed' itself, but always play all discs.

  Light to the factory side, it opens and closes, and when a cd is put in it sounds as if its going to do something, but after a few seconds only stops and don't open the program or recognize the drive. I read through many responses of forum and things like delete upper and lower filters do not work as they are already not.

  Advice or answers will be very appreciated!

  Hi sugar_owl,

  1. run the troubleshooter from the link, below, you can see the link below:

  Hardware devices do not work or are not detected in Windows:http://support.microsoft.com/gp/hardware_device_problems

  2. If this does not help, you can uninstall and reinstall the CD/DVD drive:

  To do this, follow these steps:

  a. Click Start and then click Control Panel.

  b. click System and Maintenance, click System and then click on Device Manager.

  Note that if control panel is in Classic view, double-click System and then click on Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  (c) in Device Manager, expand CD-ROM/DVD-ROM drives, right click on the device CD and DVD and then click on uninstall.

  d. When you are prompted to confirm that you want to remove the device, click OK and restart the computer.

  e. After you restart the computer, the drivers will be installed automatically.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot get the HP Solution Center to load for officejet pro L7590 all-in-one printer

  Unable to get the HP Solution Center to load. Have an officejet pro L7590 all-in-one connected wireless (through the router) on my new computer Windows 8 but had to deceive it calling it a direct connection.

  I have a new computer with Windows 8.  I managed to get my HP officejet pro all-in-one L7590 printer connected and working with software downloaded from HP.  During installation it placed an icon on my desktop (the old format disktop I love) to the center of HP solutions, but when I try to open the Solution Center a message indicates that the installation is not complete.  When I try to install more software it brings back me to the orginal installation and indicates that the device is already installed.

  I want to clarify again once my choice of installation was directly connected even if it is wireless via a router.  It was the only way I could make it work.

  The Network Configuration page was just that you will find the IP address, but you have this.  It is not as important now.  Now that I've shown you a method to help you analyze let us begin the process is not easy to get the Solution Center works again.

  I was very happy to find an official document on your computer Windows 8 and the solution Center.  I think this should help you when you select your operating system on this page.  It is titled "The scanning device estintrouvable and other related errors" and will be a little better explain what you need to try to get the Solution Center to work once again, I am.

  Let me know if you have any questions concerning one of the steps here and I will do my best to answer those as quickly as possible. I do not know a few things to do if it does not, but it is certainly the best advice to try first.

• Cannot get the PDF2ID plug-in to work.

  I bought the PDF2ID add-on for Mac and installed using the InDesign extensions Manager.

  It's in the Extensions listed as PDF2ID Lite 4.0.1 Recosoft Corp. Manager.

  InDesign Recosoft has among the drop down menus. I clicked and I get the following error message:

  PDF2ID can not detect the PDF2ID folder. The folder was moved from its previous loacation.
  PDF2ID requires that the files in the folder to use. Navigate to the folder PDF2ID from dialogue that appears. (2002)

  I haven't moved all folders. This dialogue is displayed, locate the PDF2ID application folder.

  I did a search, there is a folder PDF2ID. A InDesignPlugin that contains versions and resources as well as a "grayed out" Unix executable files. Which satisfies this request either.

  And now I'm stuck.

  Gregg Fisher

  gfisher@adcomm. TV

  Mac Pro |  10.8.5 OSX | Adobe CC

  Following this PDF2ID problem.

  I got instructions from Recosoft and the plugin works fine.

  The problem was that I had used the trial version was that collide with the PDF2ID plug-in.

  If anyone has this same problem, please email Recosoft to [email protected].

  I must say, the plug-in has been spare me steps.

  Gregg

• Blog customized in Adobe Muse and British Colombia cannot get the body copy css to work

  Hello

  I created a blog through Adobe Muse and Business Catalyst customized instructions, I found in a video.

  Seems like everything works most of the time with the addition of styles custom to modulestylesheets.css however, not for the life of me I can get the text of the

  blog to cooperate. At least according to the video I am following.

  It's the css instructions, I add, and it is the only part that doesn't work - will not change. My guess is something somewhere else than this horse, but I'm not.
  
  / * body of the blog text * /.
  . post-Corps
  {
  color: #534741;! important;
  Police-family: muli; without-serif;! important;
  do-size: 12px;! important;
  Police-weight: 400;! important;
  padding: 0;! important;
  line-height: 84px;! important;
  }

  As you can see - I even added the tag to see if it would work, but still nothing. I am at a loss and need to have this site complete and launched with new area tonight!

  The link:
  http://lisastendig.BusinessCatalyst.com/embodiment-blog

  I'm trying to get the copy of body to be the Muli police but also with a few good Interline spacing.

  I hope that someone can help you today - so it would be very appreciated. Thank you!

  Hi BubbleHouse,

  I checked the layout of details of blogs and seems family of police entered the embed code of the blog and it is preceedence containing the css system.

  You can go to the blog content and change the font family: calibri, serif police-family: inherit, it should take the modulestylesheet.css police

  Kind regards
  Radi amin

• Satellite U200 - cannot get the LAN port to work

  Hello

  I hope someone can help. I reloaded a new version of windows on my laptop, I don't have the recovery disk but downloaded all the drivers from this site. However, I can not the LAN port to work. I tried several times to install the driver but no luck. In the Device Manager, it says device cannot start for the Intel 82559 fast Ethernet LAN on motherboard.

  Can someone please offer some advice? I am a person of correct PC then understand the concepts and can get around the windows.
  Thank you

  Satellite U200 what model do you have? The number of other Sat U200-xxx would be very useful to know which LAN chip was equipped with your laptop.

  But generally, you can find all the drivers on the European driver Toshiba page.
  Check the model number and serial (bottom) and choose the correct LAn driver Toshiba page.

  Notes; Win XP should be updated to the last State. I mean that you need SP2 and the additional fixes to ensure that everything would be fine.

  Good luck

• Satellite 1410 - cannot get the STRANGE new work

  Hi all

  I'm stuck getting Toshiba S1410 PS141E-07HKR-PL to work with Samsung SN-S082H-BABY-reader DVD - RW.

  Broken removed from the laptop drive was master/slave Toshiba SD-C2612. I know that Sn-S082H spec CSEL. I tried different firmware SB00, SB01, and SH00 SH01 - they can be csel = high and = low flavored, the numbers go as high as 3, so there may be 16 posible firmwares to check.
  Whenever I have change firmware I need to put the player in different notebook, so it does not work yet. Very tedious and dangerous. So.

  Is there a list any compatible weird for this laptop? Does anyone have experiences with this particular hardware configuration? On many forums I read messages that some firmware worked better then other none for me unfortunately.

  Cordially :)

  > Y at - it list any compatible weird for this laptop?
  Have you checked the user manual? Do please!
  On the first few pages, you will find some compatible sides, they are compatible with your laptop.

  I think that the reason why this drive does not work because it s are not in the user's manual and not every reader is compatible with all laptop, for example the assignment of pins.

  I hope I could help a bit if you n t have the user manual, you can download it on the Toshiba site. ;)

• Satellite A300 - cannot use the CD/DVD drive

  Hello

  I have Satellite A300 and my DVD drive is not seen by Windows 7.

  I do not see in the Device Manager, and when I use the updates provided by TEMPRO, and on the site, it just won't update.
  When I opened the Toshiba Disc Creator, it gives me an error saying that it does not have any drive connected.

  See you soon.

  Hello

  You should try to remove the upper and lower filters in the Windows registry. So just follow this work around:
  http://support.Microsoft.com/kb/314060

  Another question: can boot you from this drive?