Re: Satellite M100 - Memory Upgrade - Recovery CD

I want to upgrade memory. It would affect my recovery process because it allows to detect a different set of equipment being installed?

Another question is, does anyone know how to recover your Windows product key, as I only have the XP Recovery CD. Lost the box.

Thank you

Hello

Just a few answers to your questions:
> It would affect my recovery process because it allows to detect a different set of equipment being installed?
N ° upgrade RAM has no influence on the recovery procedure. Just be sure that you are using compatible RAM modules
> Does anyone know how to recover your Windows product key, as I only have the XP Recovery CD
When you use original CD facilities of Toshiba Recovery for your model Mobile you did you need to activate it using the Windows key.
http://APS2.toshiba-tro.de/KB0/FAQ6701IF0002R01.htm

If you have any other questions please let me know.
Good bye

Tags: Toshiba

Similar Questions

  • Satellite A60 memory upgrade does not help

    Hi, I have a Satellite A60-793 and I want to upgrade the memory by adding a 512 MB of memory currently installed.

    I tried to install a 512 MB DDR PC2700 333 MHz SODIMM module, but the system does not boot to the top: it emits a long whistle blow and then stops automatically. If I remove the module, the system starts properly.

    I have already updated my BIOS, I here something more, I can do to make it work?

    You simply used bad, faulty or not fully considered supported modules.

    Recommend to test it with another new

  • Satellite M100 RAM upgrade

    Hello
    Just a quick question. Can I use DDR2 667 MHz 2 GB of RAM in an M100?

    Apparently, it is RAM PC5300, but the manual says it is recommended that PC5400 RAM should be used.

    Don't want to shell out $79 to find it does not work.

    Thank you

    Hello

    First of all, you should check your FSB.
    If the bus front end (FSB) would support the 667 Mhz then your memory installed modules would go to 667 Mhz.
    But if your FSB supports only 533 Mhz and 667 Mhz modules will be reduced to 533 Mhz in modules will not work at full speed.

    By the way; Are you sure you can use a 2 GB RAM module?
    If your laptop can be upgraded to 2 GB only, then you must use the RAM modules of 1 GB max.

  • Satellite 4090XCDT - Memory Upgrade help needed

    Hello reader,.

    I own a Toshiba Satellite 4090 XCDT notebook and it came originally with windows 98SE and 64 MB of ram, but I installed Windows 2000 pro and I need to upgrade the memory, I did some Google research on the specs of this laptop and found that this machine is capable of 192 MB of ram , but there is one memory slot, how is possible to get this upgrade when require sticks of memory 128 + 64 = 192 MB, that would mean I'd need two memory sticks to reach the range of 192 MB, from what I see here is therefore the only memory of memory bank.

    Could someone please point me in the right direction and provide me a solution to my problem, any help will be greatly appreciated.

    Cheers MagicBytes :D

    When the memory is empty, the amount of memory is reported?

    If its 64 MB, then you simply install a 128 MB module to achieve 192 MB

  • Satellite 4010CDT memory upgrade

    Can someone help me with this OLD problem... ?

    How memory is changed in the satellite 4010cdt series... ?
    I have looked in all the obvious places, but can't see where she could go

    Thank you

    Hello

    I found some information:
    First of all, you can use a 128 MB module and you can upgrade the memory maximum. 160 MB (internal memory of 32 MB, 128 MB)

    AFAIK memory module housing is under the keyboard.
    You need to remove the keyboard to upgrade the memory.
    But if you remove the keyboard, you have to be careful.

  • Satellite 2140cds MEMORY UPGRADE PROBLEMS

    I currently own a 2140CDS satellite with 32 MB of ram standard.

    I bought a module of memory of 128 MB (128 MB 144pin SODIMM PC100 3.3V CL = 2) of technology crucial to take my ram up to the maximum of 160 MB.

    When I install the RAM, the computer doesn't recognize it, and I get no error while starting the system, the system shows still 32 MB

    I had verified memory module and it works well, I had my slot memory computers checked to see if he had any problem with it. The computer and the module of memory seem to have no failure.

    Can anyone give me a hint or help to solve this problem.
    If I need to use memory from another provider IE KINGSTON

    Concerning

    Scott Bremner

    Hi Scott,.

    I suggest these two modules autour swapping or just use the new 128 MB module to the main location.

    Also, make sure that the modules of memory are firmly and correctly locked in place.

    The normal recommendation is to use only authentic RAM Toshiba modules, but personally, I use the RAM modules that I got from ORCA, so I don't think that there should be no problem with your crucial.

    HTH

  • Satellite L505D - memory upgrade Possible?

    Hi all.

    I have laptop Satellite L505D-S5965. It has 3 GB memory DDR2 SDRAM 333 MHz. Specifications are here:
    http://www.CNET.com/laptops/Toshiba-Satellite-L505D-s5965/4507-3121_7-33695859.html

    I could install 2 times x 4 GB DDR3 800 MHz in this laptop? My CPU/motherboard support it? Or can I install DDR2 600 Mhz SDRAM?

    I saw a couple of laptops same on ebay that had mentioned DDR3.

    I don't know, but the motherboard is probably V000185540. It has a AMD X 2 QL - 65 processors.
    CPU info can be found here:
    http://www.CPU-world.com/CPUs/K8/AMD-Athlon%2064%20X2%20QL-65%20-%20AMQL65DAM22GG.html
    It is stated that the speed of the bus
    333 MHz dual channel DDR2 SDRAM memory controller
    One 2000 MHz 16 - bit HyperTransport link
    Made it me confused - this is the maximum speed of memory, I can install it?

    AMD 780 G with SB700 south bridge chipset is.

    Operating system is Windows 7, should be no problem with it.

    If someone wants to be able to answer my question, I would appreciate it a lot.

    Post edited by: Scandic

    > Can I install 2 times x 4 GB DDR3 800 MHz in this laptop?

    I put t understand why ask you this question?
    You have validated the page with specifications and it is said clearly: Max RAM taken in charge: 8 GB
    So you can use 2 x 4 GB RAM modules

    The speed of the RAM depends on the speed of the front side Bus: care page says: 800 Mhz.
    So still fastest of all the RAM would go to 800 Mhz

    > Can't do my CPU/motherboard? Or can I install DDR2 600 Mhz SDRAM?
    You cannot mix DDR3 and DDR2. Both are physically different.

  • Satellite P200D Memory Upgrade

    If I buy the Toshiba Ginga USB 16 GB stick it to increase the memory on my laptop I have spin short so that wouldn't be a good this what else I can do, you can propably guess I don't know anything about the technical side of pc

    > If I buy the Toshiba Ginga USB 16 GB stick it to increase the memory on my laptop

    There is no relationship between the usb stick memory and laptop. You can use it to store data, external storage device.

  • Lost my disc of recovery for Satellite M100

    While using my recovery disk, I have problem because of the CD room and told me I was struck (defected) and now I'm looking for a new.

    So, how can I get a new laptop for my SATELLITE M100-221 computer recovery disk?

    I hope so. The service allowed in your country partner can help you and the command copy to you. The addresses and telephone numbers, you will find under http://eu.computers.toshiba-europe.com > support & downloads > find an ASP.

    Good bye

  • Need advice on the recovery CD and Vista upgrade on Satellite M100-222

    I want to share my problem to get some tips. I got a laptop Satellite M100-222 Windows XP and Vista capable, then I got an upgrade to Vista and it works with few problems that do not recognize some programs.

    That's why I have some needs and need your help and support and they are as follows:
    1 - is possible to reformat using the upgrade of Vista, or need to reformat with XP first and then update with Vista.
    2 - I tried several times to start the CD, DVD (product recovery) to reformat the laptop. However it is said (operating system not found).

    Kindly enlighten me.
    Concerning

    With regard to the point;

    (* 1) * If you ONLY upgrade Vista CD, then it s necessary to start the first restore XP CD, and then upgrade to Vista.

    (* 2) * usually start from the CD/DVD recovery must format the HARD drive and need to install the new image of Toshiba. Please check if you have started since the right recovery CD! Don't mix it with the Express Media Player recovery CD!

  • Satellite M100-222 - RAM upgrade

    I want to improve my Toshiba Satellite M100 - 222 RAM maximum. My laptop supports 4 GB of RAM.
    The current RAM of the laptop is I bought my laptop with 1 GB of RAM by default:
    2 x Hynix HYMP564S64BP6-C4 - 512 MB (DDR2-533, 266 MHz)

    Please notify... whether for the purchase of these memory modules:
    http://www.memoryupgrade.Pro/2GB-Toshiba-Satellite-M100-222-memory-1x-2GB-PC2-4200-DDR2-533mhz-so-DIMM-upgrade.html

    I googled around a bit and found the info that you can use the module memory with part number PA3513U-1M2G. Use this number in Google and the pich up to info on price and the place where you can order.

  • Satellite M100-221: can I use 2 GB memory module in a slot?

    My Satellite M100-221 currently has 512 MB of memory and I want to bring to 2 GB. Is it possible to expand the memory by adding just a 1 x 2 GB memory in the expansion slot available? Or I have to put a matched module (2 X 1 GB)?

    Hello

    As far as I know it of possible to upgrade the memory to 4 GB max.
    That's why one a bank should be able to handle the module memory of 2GB.

    So it of your choice if you want to use a module of 2 GB or 2 x 1 GB modules.

    Greetings

  • Satellite M100-222 - what memory module is good

    Can please, someone advise me which module of memory is good for above mentioned laptop.

    I would like to upgrade memory of 1 GB to 2 GB

    Hello

    Modules memory Satellite M100-222 supports a 533 MHz DDR2 (PC2-4200)!
    The laptop runs max 4 GB of memory (2 x 2048 MB)

    Check this page he s confirm my info
    http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=25742&ft=m&St=3

    I hope I could help

  • Satellite M100 - 164 (PSMA0E) - Toshiba need recovery disk

    Hello!

    My sister has a Toshiba Satellite M100 - 164 (PSMA0E) which used it for 2-3 years.

    I formatted. Year last to install Windows Vista. But, unfortunately, I also deleted the partition hidden for this upgrade. In addition, as you can guess, I didn't create the recovery media, before my formatting. She started to say that she's not happy with the system and asked me to convert it to its previous state.

    In the forum, I saw that the user {color: #ff0000} * ["locojava" asked a question on a driver he was looking for his PSMA0E | http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=199573#199573] * {color}. I wanted to respond to the thread, but it was locked.

    So, I would be grateful, if "locojava" or any what M100-164 of the users who have the recovery media would contact me in order to find a solution. I want to do a clean install to make her happy with the laptop to factory settings. I can also buy the CD to chip away at to fix the problem.

    Thank you.

    HI donqvixote,

    I m not owner of the Satellite M100 but if you contact an authorized service provider, you can get one there. It s always advisable to contact the guys because they can get certified answers and try to help you as best we can.

    Here is a list of the aspic:
    http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  • How to make a shortcut to the Satellite M100 recovery?

    I want to reinstall an operating system on your laptop * toshiba satellite M100 *. but I don't have the laptop computer driver CD. the best solution? Thank you.

    If your laptop has been delivered without recovery DVD and with recovery image stored on the HARD disk, you can boot and install it by following this document - http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

    If this does not work, then you have a problem.

    Please post comments and we can continue our discussion.

Maybe you are looking for

  • Vista update does not work on a Satellite M70 122

    I own an M70-122, with 1, 5 GB Ram - Intel 915GM, with abt 40 GB free on the disk. Running Win XP Home. I tried to upgrade to Vista Home Premium. The last part of the configuration / installation, the process stops and system recovers to Win Xp. So d

  • Help on upgrading the BIOS

    Just got my P900. Update the bios. So far. a bios update is not displayed on the software update program b I downloaded the bios and tried to install desktop. I have install then follow instuction c:lenovo... wflash2.exe that loads a black screen wit

  • The Boot Camp Assistant problems

    I'm trying to install 10 Windows on my MacBook Pro 13.3 2015 "running Mac OS X El Capitan (10.11.2) but I can't not (for software that is not supported by Mac OS X). I tried several times but it still says that my disk space is not enough (don't reme

  • Mac displays officejet 6500 printer E710n-z but is always looking for printer

    I have a macbook pro and running mountain lion version 10.8.2 I was not able to print for about a month and it makes me crazy! I deleted my printer and added it but when I send stuff to print still says looking for printer? I can't open the utilities

  • Cutting tool does not

    When I try to use the tool captures to Snip of a Web page, the screen darkens and the single image is the Snipping Tool window.  I can, however, Snip the Image of office, Photos and even the browser open, but once I open a Web site I am unable to Sni