When connecting my laptop to a TV LCD TV screen has scattered green lines

Similar Questions

• No sound when connect you TV to HDMI on my Satellite port has

  When I connect my laptop to my TV I get the display to work but no sound.

  I read where a lot of people with all types of computers have this problem, and most of them just default playback to the SPDIF thing.

  But when I do it still does not work.

  Can someone help me.

  I had problem of thersame, then follwed the indtructions on the link below:

  http://APS2.toshiba-tro.de/KB0/TSB7601WR000FR01.htm

  This document is written for Qosmio laptop but the principle must be the same, if that doesn't work try FN + F5, you should had video and sound on the LCD screen and a white screen on the laptop.

  Hope the above helps.

• When I connect my laptop L300D to my LCD tv using VGA to VGA it works fine for a few minutes then the screens n that the laptop and TV started blinking on and outside. Can someone advise please.

  When I connect my Toshiba L300D laptop to my Samsung 40 inch lcd tv using vga to vga connection it works fine for a few minutes. Then the screens on the laptop and the TV start to turn on and turn off, also jumps around cursor. Can someone tell me what is the problem and how to correct.

  Hello

  Try changing the VGA cables and check if it helps.

  If the problem persists, then I suggest you to update the firmware.

  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

• Sony Smartwatch 2 - device not detected when connected to laptop computer

  Hi when the connection of my smartwatch 2 in my laptop I get the USB device cannot be detected / no driver error and PC companion doesn't recognize it too. I know this isn't a laptop problem that I connect my Xperia Z tablet and Z1 phone him fine. Any help would be appreciated. Gavin

  The SW2 is not a device that will be detected as a connected external device - updates are performed via an update to the app and apps are done via the phone - so you can not transfer files simply load it via your laptop

• Re: Satellite P300 - no sound when connecting computer laptop to TV via HDMI

  Hello

  I searched online on several sites and read the messages on this forum too but still could not find a solution that works.
  I plugged in the cable and instantly got video but no sound. This cable works fine with my PS3.

  I tried to set the audio device by default both HDMI and S/PDIF and reboot after each time, but it doesn't work!
  Also, when I choose HDMI as device and try clicking on the Test, I get an error message saying "cannot play the test tone".

  I checked for updates for the driver through Windows and it is said that there are no updates. I have a Satellite P300 laptop.

  Anyone have any ideas?

  Thank you
  Jen

  This means you have a perfect television image after activating the HDMI port but the problem is its only?

• I need to connect my laptop to my 47 '' lcd tv. I have hdmi but no picture or sound?

  I can't get to work for nothing and I am really frustrated. Please show me the way...

  Connect your computer to a TV:

  http://Windows.Microsoft.com/en-us/Windows7/connect-your-computer-to-a-TV

  HDTV: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/HDTV-frequently-asked-questions

• When connecting through vpn system get restarted and blue screen in win xp3. How to solve this problem?

  I have everyone!

  I want to connect my people by VPN, once install the vpn and attempt to login system download blue screen and restarted in win xp3. How to solve this problem?

  Hi Satya,

  The question you have posted is related to the VPN connection and would be better suited to the TechNet community.

  Please visit the link below to find a community that will provide the support you want.
  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads

• When I published a movie in Windows Movie Maker screen was all green... How can I fix?

  The file is an AVI file

  The file is an AVI file

  ==============================================
  I'm guessing that you are under Vista Movie Maker 6?

  Do you mean the source file is an AVI file... or are you saying
  you published (recorded) your project in DV - AVI format?

  Publication as DV - AVI can be worth a try if you have not tried.
  (not an option in Windows Live Movie Maker)

  The following video tutorial may be worth a visit:

  Solution problem of Vista Windows Movie Maker green screen!
  http://www.YouTube.com/watch?v=925H7fj-W90

  How to post...

  Windows Vista - publish a movie in Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  This image shows where the DV - AVI option.
  http://www.Papajohn.org/IMGs/Vista-PublishToComputerChoices.jpg

• Laptop computer 32AV700A REGZA LCD TV using WLan connection

  I would like to connect my laptop to the new LCD TV - REGZA 32AV700A using WIFI rather than via HDMI or PC connector.
  Is it possible on this LCD TV.

  Anyone know what type of dongle, I expect to connect via the USB port on the TV?

  Thank you

  Hello

  According to this technical data Toshiba this TV has not been equipped with a WLan:
  http://www.MyToshiba.com.au/products/LCD-TV/WXGA/av700a/32av700a/specifications

  But you can use a DLNA solution.
  http://en.Wikipedia.org/wiki/Digital_Living_Network_Alliance

  http://www.DLNA.org/

  The Toshiba REGZA series supports the DLNA standard.
  Also any PC with network (WiFi, Lan) interface can become a DLNA device by installing DLNA software. Google a bit there are a lot of different software.
  I found this one:
  http://www.tvmobili.com/

  Windows Media Player 12 also supports DLNA roles.

  I hope that helps a little... I recommend reading on this topic for more information...

  Welcome them

• Video OK but sound does not go to the TV when connected HDMI on HP Mini 311 with XP.

  Video OK, but the sound does not go to the TV when connected HDMI on HP Mini 311 with XP. Has anyone experienced and resloved this issue and can share with me.  The solutiuon provided in the manual does not seem to apply to the Mini 311 model that we use. Help, please.

  James,

  Visit this link,

  How to get his TV using HDMI cables?

• Red/green line on screen of laptop

  So, whenever we go out, my family put my laptop under a couch to hide. This has been done several times, and this time when I pulled it out and opened it, there was a vertical green line on the screen... I lifted the laptop and thought maybe something underneath was loose, then a red line appears beside that green...

  Anyone have any ideas on what is wrong? The lines are still there, for two days. I don't drop it or anything, but just maybe I put him on the ground too hard. I searched on the internet and get the results of "broken screen", "broken video card", "Reinstall video card", "some things are cowards"... no idea what to do. If anyone have experienced this, please help!

  My laptop is Compaq Presario A900, is told by the way. Had for about... 2 years. Or less.

  Looks like this:
  http://img8.imageshack.us/i/dsc07010gwg.jpg/

  and no, I didn't sit on it or drop it, ever. This is why I still don't think that the cables of the screen are screwed or the screen is broken. Other problems, perhaps? Thank you.

  Hello

  1TS restart to ensure that nothing works to influence the following process.

  Change the resolution of your screen to a little lower - OK. Change for a bit higher than it was (all the way)
  the lines change their locations or they stay in the same place? If they stay in the same place then it
  There's a chance that the screen has been damaged. You can reset the resolution as desired.

  --------------------------------------------------------------------------

  Now this

  Control Panel / Device Manager - graphics cards - writing down of the brand and complete model of the device.
  Double-click it and write the version - now click on update drivers (this could do nothing as MS is
  far behind certification pilot) - now do a RIGHT CLICK on the device and UNINSTALL - REBOOT which will refresh
  the driver stack.

  Then go to system Maker and get the latest drivers (or the same if not more recent ones) - download - SAVE-
  go to where you put - top - right click RUN AS ADMIN - REBOOT.

  C
  http://www.Compaq.com/country/cpq_support.html

  I hope that your lines have disappeared.

  If not try this-

  Start - type in the search box - MSCONFIG will find at the top of the list right click - RUN AS ADMIN.

  General tab - note what settings are there now - select Diagnostic startup - APPLY / OK - REBOOT

  Are the lines still there? If this isn't the case, then you have a program or service starting up causing their.

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135

  How to perform a clean boot procedure to determine if background programs interfere with one
  game or a program that you currently use
  http://support.Microsoft.com/kb/331796

  -----------------------------------------------

  If the lines are there after updating the driver and using the diagnostic startup so I think it must be
  a screen problem so you will need to contact Compaq.

  I hope this works.
  Rob - bicycle - Mark Twain said it is good.

• How do cancel you it when your screen has turned sideways?

  HP laptop

  Windows 7

  That screen has turned sideways I accidentally pressed a key combination at a time, and my screen turned horizontal rather than vertical

  Hello

  Try to press and hold the Ctrl and Alt keys, then press the arrow upward.

  Kind regards

  DP - K

• Connect a laptop running Windows XP to a LCD via HDMI

  Hello

  I did a fresh install of windows XP SP3 on my Sony Vaio Z series. I bought a HDMI cable to connect my laptop to an LCD (DYNEX 32 '') so that I could watch movies and so. Unfortunately, the LCD doesn't detect any signal from my laptop. Is there a solution for this problem... I have to install some driver or what?

  Please advice...

  Hello, mykhtarz

  Since you have made a new installation, it is likely, that you do not have the required driver installed software to automatically switch to the HDMI. I recommend first check with the manufacturer for updated driver software.

  There may also be a combination of keys on the laptop to change HDMI manually, usually a combination of # FN + F. You'll need to refer to the documentation of your laptop for which key can control the HDMI.

  You can also go into the display properties and change the default view for the HDMI. To check the display properties, follow these steps:

  1. Click Startand then click Control Panel.
  2. Click appearance and themes, and then click display.
  3. In the settings of the display properties dialog box tab, click the icon of the monitor that represents the monitor you want to designate as the primary monitor.
  4. Click to select the use this device as the primary monitor check box. Note that this check box is not available when you select the icon of the monitor that is currently set as your primary monitor.

  For more information, see the following link: How to configure and use multiple monitors in Windows XP:http://support.microsoft.com/kb/307873

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Laptop screen disabled when connecting to a projector

  Original title:

  Hello, I am trying to connect to a projector Acer H5360 to my computer dv9750 Pavilion laptop under Vista Home Premium using an HDMI cable.

  Whenever I connect the projector, or noting happens and typing FN + F4 I can have my proposed office or automatically after a certain time, my office is planned (without typing anything). In both cases, the office disappears from the screen of my laptop (!)
  The only way to have my laptop active screen is again by disconnecting the HDMI cable AND it's not completely deterministic: it happens that the laptop screen remains inactive after extraction of the HDMI connector and until the power is cycled
  My question is how can I configure the system to always reflect the tower to the projector screen, whenever the projector is attached, while leaving the tower still active screen? before, during and after the setting of the projector.
  I would add only that I did not imagine it's be so complicated to just fix a projector. For example, when I move the same projector with the same cable to my xoom Tablet I just see projected! without doing anything more than the * physical connection *.

  How many times do you have to press the key combination?

  FN + F4 key combination is to switch between monitors. Try pressing the fn + f4 several times until you get show both monitors ON.

  When the monitor of the laptop is turned OFF and the projector is on, press the key combination, the projector must be OFF and the monitor of the laptop must be turned on. By pressing the key combination twice turns the laptop screen and the projector. There should be no instance that both will turn OFF.

  If it does not try to activate your dual display:
  Right click on the desktop-> Output To-> Intel Dual Display Clone-> notebook + monitor. It can vary in defense on your installation, I use a laptop HP and Acer LCD as a second monitor.

  Multiple monitors: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/multiple-monitors-frequently-asked-questions

• IPad no charging current after the update to IOS 10, when connected to the laptop.

  My Ipad no charging current after the update to IOS 10, when connected to the laptop. But fine load with Bank charger or battery with the same cable brightening.

  PL suggest how to overcome this problem.

  Have a look here If your iPhone, iPad or iPod touch won't charge - Apple Support