Re: Satellite P850 full face feels 'sparkling' when it is connected to the power supply

Similar Questions

• Windows does not load and displays a black screen when it is connected to the power supply

  Original title - Windows Vista running on my laptop Sony VAIO

  Trying to turn on my laptop using the built in battery nothing happens.  When the laptop is connected to the power supply and turned on Windows does not.  It shows something in the sense that it does not properly off.  It tries to load back to a system restore point before the last stop, but seems to fail again during this process.  All that is displayed is a black screen. Currently the power on light is on, the battery light is on, but the drive activity light is off.

  Yet once again, I switched on the laptop and finally the Startup Repair process is automatically called.  After the display of the bar to attempt repairs, the system has been repaired successfully.  As a result, the I ran my Norton anti-virus, followed by Windows Updatesoftware.

• Satellite P100-347 does not stop when it is used on the power supply

  I have a new laptop of P100-347 games and I have 2 problems. Can anyone help?

  (1) when I use the usb port on the left side of the laptop, the laptop seems to restart the same time that I plug anything into it! I called Toshiba and said to update Bios, so I did (version 240 up to 330). But as soon as I did it started to the following problem:

  (2) when I run the laptop on battery, I can turn off the phone by pressing the power button or by clicking the windows locked. But as soon as I plug the power supply whenever I want to stop the laptop, the laptop just restarts. Does anyone have any ideas?

  Thanks for the comments!

• Satellite U500: Volume + button glue IT when it is connected to the power adapter

  I have a problem with the touch buttons on my U500. I have already returned the first laptop that I bought for the Exchange.

  The question is this:
  When the power cord is connected (without worrying if connected to the wall) the "Volume +" button will stick THERE.
  The volume will continue to rise, it cannot be muted or turned down as the + keeps repeating.
  Without the power cable inserted the works of buttons as expected (normally).

  I made the new installation of recovery discs - do not set (under Vista)
  Then another new installation Win7 upgrade and this new PC is having the same problem.
  At first, I thought a hardware fault (the new PC worked fine for awhile).
  But now the second PC has the same symptoms I suspect a software/driver problem.

  I've seen suggestions for similar questions to:
  Re-install "Toshiba common Modules" but I can't find it on the support site for U500 in Australia.

  Any help would be greatly appreciated. Thanks to you all.

  What version of BIOS is installed?

  Try to update the BIOS.

• iPhone 5 sec. turns off immediately when it is connected to the power supply or the computer.

  I hope someone can help me with this. I couldn't find anyone with a similar problem.

  My iPhone 5s stops at random times and stop immediately when I plugged it to either power or a computer.

  He ran hot enough (can be felt in the back) and the battery doesn't last long at all.

  He is now in recovery mode after a few attempts of setting (plug on the iTunes screen).

  But it stops as soon as I connect and show no signs of life until I unplug the unit.

  IOS running 9.

  Take a look at this article, it may help you http://osxdaily.com/2014/06/09/iphone-randomly-shuts-off-fix/

• Shift of the computer; It seems that my laptop is lagging when it is connected to the power supply (AC adapter) and it works perfectly fine when it is NOT connected to the power adapter. Can someone help or diagnose the problem?

  This shift of computer thing had never happened before until about a week ago. The shift comes every 30 seconds or more and it occurs also when I switch between applications.

  Hello

  I saw this kinds of problems occur with the power strips and even UPS systems. And some similar questions have
  been solved using them actually, especially the UPS. If the power strip has important circuit protection
  He'll probably bad or you have very low power at first on this AC circuit.

  Solution is not to use the tape and maybe get a UPS with brown-out solution.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Satellite A200 - touchpad random movement when it is connected to the power supply

  Hello
  When connected to power and press the pointer jumps on erratic (only by pressing the key) even if I hold my finger again.

  BUT if I keep in touch with what it is connected to computer laptop 'ground' such as the VGA connector then everything works correctly.

  Also if the laptop is sitting on my lap this also fixes the problem (I have experimented by placing it on a wet towel to simulate the protective effect of my body and it had the same effect, i.e. no pointer to nervousness).

  Finally when executing a stack, there is no problem.

  I tried implementing level and retirement of pilots and all sorts of permutations in the settings so I don't know it's a material thing. Disassemble the system to look at the connections of touch pad but nothing stood out.

  Does this problem familiar to someone or do you have ideas what tests I could do to identify the problem more away?

  Thank you
  Shane

  Thanks for the comment man!

• Satellite A500 - battery light flashes when connected to the power supply

  Win 7 Satellite A500 PSAM3A-03P00E.

  Battery light flashes when connected to the power supply (intermittent fault), when I disconnect the sector and reconnect the flashing stops and battery (high capacity) continues to receive.

  Also, when battery light blinks the keyboard backlight stays on when it should white and if the backlight is turned off and the battery light starts to blink the keyboard backlight turns on, all other functions seem to work well.

  Charges of battery and the wedges load properly (when the battery flashes).

  Hello

  Have you noticed this problem since the first day of purchase?
  Theoretically, it could be possible that your battery begins to malfunction
  On the other hand, an electrical problem could also be possible

  However, try this:
  Remove the battery and the AC adapter. Then press and hold button power 30 sec long.
  Then insert the battery and plug AC adapter still does that help?

  By the way: this is the BIOS updated? If this isn't the case, perform an update.

• The battery on my Toshiba NB500 has not been charged since one should use it when you are connected to the power. The battery in the tool bar icon indicates charge but is always 0% available.

  The battery on my Toshiba NB500 has not been charged since one should use it when you are connected to the power. The battery in the tool bar icon indicates charge but is always 0% available. What could be the problem and how can I solve it?

  A problem better put to the support of Tosh or their forums, with regard to their equipment, not MS or Win

• Satellite L650-12Z: led does not light up when it is connected to the power source

  My L650 doesn't show the white light anymore when the cable is connected.
  The connectors are clean, and the adapter does not work.

  The laptop still works on the farm (when he was still in power in).

  Also without the battery, there is no white light indicating that the laptop is connected to the domain controller.

  Anyone know what could be the problem and how to solve?

  Hello

  Battery is charging while the AC adapter is plugged?
  Are you sure that the adapter is OK?

  If the battery would be charged correctly and if the laptop works ok, only connected to the power adapter (without the battery) the a problem with the frame of the LED may be possible
  But in this case only the technician must test these parts

• Satellite M40x-189 heats up when it is connected to the power adapter

  Hey,.

  I have a Toshiba Satellite M40x-189, which is about 18 months old. Recently, I had too replace the battery, but now it seems that my adapter had fried itself. He refuses now too charge my cell phone for more than a few minutes and the part of the adapter that goes into the laptop becomes ridiculously hot even after a few minutes.

  I can't find where too much to buy a new adapter, I get results, but adapters look totally different, can anyone tell me if Toshiba has changed the cards and where too find a power adapter.

  This may help - adapter PA1650 - T 02:100 - 240V AC 50-60 Hz 65W / 3 pins with 19V DC output.

  Also, I find that on the occasions, my laptop just cut. In the middle of everything what I do, and the laptop itself would become so hot, it can't be touched for a few minutes, interestingly, this only happens when the laptop is charging. This problem is not related too my adapter problem, because its been happening for a good month now.

  Thank you, in advance.

  Post edited by: Danny90

  Hello

  I saw your first thread on the power adapter and that other users already suggested the power adaptor can be ordered from the maintainer authorized Toshiba in your country!
  If you n t know how to find the service provider allowed in your country, please take a look on the homepage of European support of Toshiba. You will find a link to the database ASP.

  As you have already said the laptop automatically stops downs have nothing to do with the AC adapter.
  I agree with you for me, it looks like overheating!
  Usually, this happens if fans and cooling modules cannot run with maximum efficiency.
  Dust may prevent the complete rotating fan!

  I recommend to use the vacuum against the bars of cooling hose to clean the fans!
  It should help!
  But please be careful.

• How to control the battery charge when you are connected to the power adapter?

  I post here because I want to know if there is any software option that I can use to control on my load while I use the charger and the dough.

  EXPLAIN

  You know in IBM ThinkPad there are some utilities can help you master the power to CUT the battery charge and keep on the power of the charger and the battery is always on standby if it is OFF the bettery then work and never lose anydata

  I want to control the load while I'm working with battery and charger at the same time.

  I hope that claire ;)

  Hello

  It of not possible to control the battery charge using any software.
  The battery will begin to charge if the adapter has been connected to the laptop and it will stop the charge process after the adapter has been disconnected or if the battery is full.

  See you soon

• Background noise when connected to the power supply current

  I recently bought a laptop series Equium A100 and am generally very happy with it however I noticed that there is sometimes a background noise through the speakers (crackles and whistles) - this happens only when the AC adapter is connected does not when running off the battery voltage. The noise is present in the onboard speakers and if connected headphones/external speakers. It's definitely coming through the speakers/headphones not the mechanical parts of the laptop or the battery itself.

  I see that others have had a similar problem also but no solution seemed to be posted. I was wondering if someone has solved this problem yet?

  Thank you very much.

  Hello

  It's very strange. I have the Satellite A100 (Vista laptop) and I don't have this problem. Satellite and A100 are portable similar and there is not much difference.

  Your laptop comes with Windows XP Home or Vista edition? Have you tried to update BIOS. It's a really stupid question and I think that whistle is quite annoying for you.

  Have you also tried to contact service? What they say about this?

• I have a MacBook Pro 13 inch early 2015 and when I connect to the power supply the connected is loose and my Mac does not load. Please help me

  MMacBook does not load

  Looks like you have is connected wrong charger (you have an older Mac in the House?) or the charger has been damaged. Perhaps the magnetic head is damaged.

  You have another mac or a friend with a mac that has the same charger if you can try that?

  You can certainly buy replacement chargers, but I recommend that ensure you it is the charger that is the first problem to avoid spending money. If this is a problem with the port on the Mac, then a replacement charger will not help.

  If you don't have a 2nd charger to test, you can take your Mac at the Apple Store or your local electronics store that sells Macs and ask to try the plug one of their display models.

• Pavilion dv6t-7000: Pavilion dv6 crash when connected to the power supply

  HP Pavilion dv6t-7000 CTO Quad Edition Entertainment Notebook PC

  I suggest to download and run the free version of WhoCrashed? to find out if the problem is hardware or software partner.

  See the following URL for a download link.

  http://www.resplendence.com/WhoCrashed