Re: Satellite Pro L - how to upgrade the drivers?

Similar Questions

• Satellite Pro A10 - how to upgrade the RAM?

  How I'm sure that when I go buy the memory that it adapts to the motherboard. ?
  Sorry for my bad English

  Is it enough to know that its DDR motherboard?

  Hi kichenin

  Until you buy new RAM modules, you should check out what specifications you need and how much memory is taken in charge.

  I checked the specs on the Web from Toshiba site and your laptop supports up to 1 GB of RAM. The specification for the RAM is PC2100 DDR - RAM. You can also buy some RAM with higher specifications (PC2700 or PC3200), but they will operate at the speed of the PC2100.

  Recommend brand for Kingston memory for example.

• Satellite Pro 2100: how to upgrade the processor?

  In my toshiba SP we processor 1.5 GHz depending on link . What is the best processor I can put in place of the one I have now?

  What bus speed and cache size? Am I allowed to put something like 2.8 Ghz with 512 cache size and the higher speed of the bus? where is the limit?

  Toshiba delivered this unit with two different processors Celeron (1.5 and 1.8 GHz). As you know the processor must be compatible with the hardware architecture and if you want to make a few upgrades that are realistic and do it with recommended CPU or tested.

  Another problem is that replacement of CPU on Toshiba laptops is not always possible due to the method of connection permanent CPU called TCP (tape carrier package).

• Satellite Pro U400 - how to upgrade the BIOS from 17/07/08

  I downloaded the update to the bios - the following file: bios - 20080717104036.zip
  I unzipped. But the way I did it twice and then I can not find the file to install this update.

  The first file of the sip consists of another zip file and in the second, there are 3 foulders: BOOT, EFI and SOURCES and 1 file BOOTMGR that is not a program.

  Can someone tell me what should I do with this update in order to install?

  Hello, Olga

  Updated the BIOS, you can use 3, 00 - WIN version. Extract all the files listed on the desktop, run WinPhlash.exe. Update BIOS version WIN can be done under operating system running.

• Satellite Pro 4200 how to avoid the mistakes of the ACPI

  Satellite Pro 4200 how to avoid the ACPI errors after installing SP2 for windows XP Prof
  The problem is that my computer after installation service Pack 2 need about 15 minutes from time of shoutdown - what should I do to avoid this problem.
  Piotr Plecke

  Hello
  in this case it would be interesting what Type of laptop it is exactly.

  You will find this model on the bottom of your laptop. There is a review of it.

  Some models have a Bios update available, others not, for example.

  Please send additional information!

  Good bye

• Satellite 2800-600 - how to upgrade the Bios/Firmware?

  How can I upgrade the Bios and firmware on my 2800-600? I want to install a new Combodrive. Which drives are supported? Where can I find the drivers and firmware etc... Please let me know. Thank you.

  Another point of view - I bought MS Windows XP Pro and haven´t you have a PC to install it on. Can I install this OS on my Satellite? Will it work? Where can I find the drivers for touchpoint etc etc... Normally, the Toshiba works with Windows ME and I can not use ITunes on ME... if XP would be great - what do you think?

  Hello Jürgen

  In my opinion, if you install the operating system on the unit you you use the recovery CD provided because it has been tested and it works without any problem. But if you want to install another system on your laptop, you can use the original Microsoft OS and all the necessary drivers, you can find the Toshiba site.

  http://EU.computers.Toshiba-Europe.com--> support & downloads

  The update of the BIOS and the important information (i.e. how to upgrade the BIOS) you will find also on the Knowledge Base Web site

  http://support.toshiba-tro.de/KB0/TSB4A00SD000BR01.htm

  Good bye

• Satellite Pro L300: How to get the sleep settings

  Before you have to play with the Satellite Pro L300 laptop recently (on the instructions of the Tech) when I close the lid of the laptop that he went to sleep BUT when I opened the lid eventually, I had to press the power button to restart the laptop.

  But now, he's just on stand by.
  How can I get this back to how it was (having to press the button to exit stnd - in)-help!

  I tried to turn off Toshiba power saver and using the windows settings but nothing
  I have treid working :(

  Can anyone help?

  I get at the end of my home with this computer laptop blinkin :(

• Satellite Pro L40 - how to enable the WLan using ConfigFree

  Can you help me?

  My English is bad I do not end.

  The question is:
  My computer is a Toshiba Satellite Pro L40 and I use the ConfigFree for the wireless, but it seems that the WiFi network is disabled.

  Help please!
  I want to know what's wrong

  Thank you!!

  Hello!

  Your wireless network card is recognized correctly in the Device Manager, or you may notice a yellow exclamation?
  Her check first because otherwise, you can get the WLAN to work.

  In addition, you can activate WLAN with the material on the laptop switch which must be set on and the FN + F8 key combination.
  Check it!

  After this Free Config should find your WLAN router if you are in the range of that.

  Good bye

• Satellite Pro U400: How to configure the VLAN for the Marvell Yukon LAN control.

  Hi all
  I need to access the 2 VLANS with the controller LAN Marvell Yukon 88E8072 for my Satellite Pro U400. I installed the necessary Configuration utility network Marvell tell me after installation, VIRTUAL local network settings must be mounted in the Device Manager (Windows 7, right click on computer, properties, click device/network management adapters/double on Marvell Yukon 88E8072 PCI-E Gigabit Ethernet Controller), I can't find a thing to configure here but wake-on-LAN.

  Any suggestion? Thank you!

  Michael

  Hello

  I think that in this case, you can use a network switch.

• Satellite Pro A200 - how to activate the new device LAN card?

  Hello.

  I have a Satellite Pro A200 and I replaced the card with an Intel 5100 (512AN_MMW) wireless and it detects OK and installs the drivers etc, but it does not work because he says that the switch is turned off on the front of the laptop. The switch is on I also tried pressing fn + f8, but it still does not work.

  The laptop is running Windows 7 64 bit

  Kind regards.

  Hi evo8.

  What card WLAN have you had before and do the work of a former?
  I think that it of difficult to say why it doesn t work but maybe this card is not compatible.

  By the way: do other FN keys FN + F8 work or simply not?

• Satellite Pro 4600: where to find the drivers

  Where to find drivers for Toshiba Satellite Pro 4600 drivers?
  We cannot choose this model in the support page...

  The drivers for this laptop Satellite Pro 4600 series are on the European driver Toshiba page.

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

  The laptop seems to be an oldie and therefore you should take a look in the _ * Archives * _ folder!

  Best regards

• Satellite A100-386 - how to upgrade the BIOS?

  Hello

  I wanted just to update my old Satellite A100-386 with 4 GB of RAM (2x2gb Crucial) instead of 1 GB, as I am now running Windows7 Pro 64 bit instead of the original XP 32.

  I read that I had to upgrade the BIOS as mine is v2.00. So, I downloaded the last of them.
  It seems to be an automatic upgrade of BIOS (S10V600.exe) as mentioned on the site Web of Toshiba.
  But when hit the .exe, I have a box of error message saying:
  "LOADPEDRV. "EXE: could not start the service.

  My question is: do I have to be 32-bit OS to run the upgrade of the automatic BIOS or is it possible to Flash the BIOS with a Windows7 64 bit OS run?

  Thanks a lot for all answer as I found no 'how to' in search on this forum.

  Best regards
  François

  Hi FPSim,

  Who said that you need to update the BIOS to upgrade RAM? The maximum RAM capacity depends on the motherboard and chipset and not BIOS.

  Official website of Toshiba, I have seen that the model supports 4 GB of RAM so the BIOS update is not necessary. Increase the RAM and everything is ok.

• Satellite Pro S300 - how to enter the supervisor password?

  Hello

  I have a laptop Toshiba Satellite Pro S300-11 years and have a problem. One day, I decided that wanted to put a password for the supervisor to the bios of the laptop. Now, I remember this password, but when I have access to the BIOS Setup, I can't watch any o change option disable this password. I can't enter this password to set me a supervisor, and also I can't change some options with respect to the example, the boot sequence.

  How can I remove this password or how do I log in as a supervisor? I see no option for this, and I need to change the boot sequence.

  A big thank you.

  Hello

  On this that I can only say, check your user manual! ;)

  There, I created the following information:
  + C:\Program Files\Toshiba\PassowrdUtility\TOSPU.exe+
  + This utility allows you to do the following: +.
  + Register, remove, or change the supervisor password.
  + Create or cancel a supervisor password token +.

  Check this and then you should be able to remove the password if you know the current.

  Welcome them

• Satellite Pro 6100 - how to change the date and time in the BIOS

  Hello

  I received a satellite pro 6100 that had not been used for some time. Windows does not work then he reinstalled with the good drive.

  When I try and windows 'enable', I get the error 32777 and the laptop is unable to connect with the activation servers that a google leads to believe me that the date and time are incorrect in the bios.

  I know that Press esc to access the bios but there is no option to change the date and time in there. I put the date / the correct time in windows, but this does not seem to synchronize with the bios. I've updated to the latest version of the bios, but this is not enough.

  How can I change or update the time in the bios?

  Thank you

  Hello

  I doubt this time and date setting BIOS does affect Windows activation time Windows doesn t affect it in my opinion. There must be another reason for this problem.
  You can activate Windows by phone?

  Normally the date and time in the BIOS can change you if you mark the date or time, and then press on + or - to change this. Sometimes you have to press PageDown/to the top according to the model of BIOS or laptop.
  Usually in the configuration of the BIOS you will find a brief info how changing the values.

  Check this box!

• Satellite Pro A300 - how to access the installation of Vista hidden partition?

  AHOY!

  I have a Satellite Pro A300 PSAGDA 2000R

  It had Windows Vista installed when I got it, but after a while, had to reformat, so I did, (I want to reformat my computer every 6-12 months on average), it came only with XP disks even if he got a serial number for Vista on the underside of the laptop so I installed XP. That was about 2-3 reformats there now.

  However, so that finding drivers I've seen mention of a hidden partition to reinstall Vista (which I hope it is 64-bit) and tried to do this several times but unfortunately it does not work, I guess that maybe what XP installation I can accidentally deleted or something? (Thought they had in fact on some solid state memory which could not be written more or something.)

  * Is there a way I can access it, take another that won't cost a ridiculous amount (for example download) or a nice person enough to create an image to download on a site or something that I can download file sharing? *

  I have also a spare copy of Vista (and a bit of XP) on the drive, none of them will work?

  + Another thing which I am interested in is can I get any of the preview of Windows 8 OS that will run on this laptop? Apparently it improved performance on Vista and W7 would be convenient for running on a laptop, and I have also heard say it is possible to upgrade to the full version of the preview or W7 for a minimal cost and would probably be much cheaper than other methods if possible. +

  And I'm actually quite handy with computers, so don't be afraid to throw big words at me,

  (Tried the methods found on the manual on page 3-8 ([link: http://www.mytoshiba.com.au/support/computers/satellite/pro/a300/psagda-02000r/download?os=22]).)

  I have European A300 and I believe that the principle on the rest of the same models.
  A300 was offered with Vista preinstalled but without recovery disc Vista. Image that contains the operating system, drivers, tools and utilities for recovery has been saved on the HARD drive and with book factory owner was able to begin the installation of HARD drive recovery. It works with the factory only settings.

  With preinstalled Toshiba laptop recovery disk creator owners have been able to create the recovery disk that can be used if the disk HARD recovery doesn't work anymore.
  If you don t have access to this image saved on HARD drive recovery, you must use the recovery disc. If you don t have the disc that you have a problem. Recovery image can not be downloaded. All you can download are the unique rivers, tools and utilities that you can use if you install a clean version of the OS (operating system).
  On the European models, recovery image was recorded on the second partition of HARD drive in the folder called HDDrecovery.

  Anyway, A300 works with Win7 32 bit. I installed it on my machine and I m very happy with it.
  > Another thing which I am interested in is can I get any of the preview of Windows 8 OS that will run on this laptop?
  I put t know who should give you this overview, but the fact is that you get it from Toshiba. You should check if you can get it in another way.