Re: Satellite Pro P100-A4E - crashes with radio gadget

Similar Questions

• Can I increase the memory on my old Satellite Pro P100?

  I have a Satellite Pro P100 (P6PA4E-002001EN) with only 512 MB of memory and the desire to know if it can be increased and if so what memory should I buy and it is easy to open the machine and adapt?

  Hello

  You can increase the memory on this laptop amazing plu of 4 GB of RAM.

  RAM modules compatible that you can use to upgrade:
  PA3511U - 1 M 51 (Kit of memory 512 MB DDR2-667)
  PA3512U-1M1G (memory 1 GB DDR2-667 Kit)
  PA3513U-1M2G (memory 2 GB DDR2-667 Kit)

  Check the underside of your laptop and there should be probably set with a cover of Ram screw. Remove it and you will have access to the memory locations.

• Satellite Pro P100 - 11(d) crashed and Linux does not load

  Hello.

  I have a Satellite Pro P100 - 11(d) which have worked well since 2007 both with preinstalled Windows and Ubuntu last.

  But... Yesterday, Firefox crashes, I thought, but after the restart it was not able to load Ubuntu desktop, comes from a command prompt.

  I tried to reinstall the driver and xserver with no luck.
  Tried to reinstall Ubuntu together, but it stops while loading of Ubuntu live.

  Thought maybe, a hard drive crash so I want to wipe the entire hard drive and so reinstalled Windows, which wouldn't load after installation. Changed the hard drive to a WD250GB, but always the same - stop loading live Ubuntu and Debian and Meego...

  Has a verified memory from the live USB of Ubuntu (before loading Ubuntu), no errors.
  I have an idea that maybe the graphics, but it has no errors or defects to display install screens - graphics.

  Anyone have any ideas?

  Oh, I had Ubuntu while loading, try checking the hard drive and what makes some mistakes, why I thought it might be a hard drive problem.

  Thanks in advance
  Leif

  Hello

  What about another system? Windows?
  Can you start and install Windows system using the Toshiba Recovery disk?

  Generally speaking, it is not easy to say what has caused this problem
  It may be related to no hardware, a part even if the HARD drive or memory error was not detected, one of these parties may malfunction
  Worst case its something wrong with the motherboard but it s only a hypothesis.

• Satellite Pro P100 - Synaptics touchpad problem with Win 7

  Satellite Pro P100 with Synaptics Touchpad, was now running Vista, Win 7 64 bit.
  The original driver had an option "disable when the external pointing device connected.

  I installed a Synaptics Synaptics_v14_0_3_C_XP64_Vista64_Win7 driver - 64_Signed_default.exe that does not have this check box.

  It works fine except that sometimes the Microsoft Mouse becomes works all the seconds that she or the touchpad to fight everyone. I have to disable the touchpad.
  So the next time I turn. If I do so without a mouse, I can't use the touchpad until I plug the mouse, turn it back on, then disconnect the mouse.

  Thank you

  Hello

  Try to install the Synaptics drivers and Alps touchpad page pilot European Toshiba.
  Choose the touchpad Win 7 drivers out for a satellite L500 series.

  By the way; the touchpad can be enabled and disabled by using the FN + F9 button combination. It is not necessary to have all the options if FN + F9 works very well.

• Satellite Pro P100 - BIOS 3.80 with ACPI and the sound?

  Is the problem with the GPU fan resolved? Can I use ACPI and its now also without hacking DSDT?

  Satellite Pro P100 - Modell Nr.: PSPAHE - 002001GR with the 3.80 BIOS

  Post edited by: renewehle

  Hello

  I put t know any problem with the graphics card, cooling module, but I found this thread on a similar theme.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=22998

• Satellite PRO P100 - 383 DVD UJ - 850 s Firmware update

  Hello

  My laptop is a Satellite PRO P100-383 with a DVD burner MAT * a UJ-850 s.

  The current firmware of my DVD writer UJ-850 s MAST * one is 1.10 and I can't write some DVD-R, because they are not recognized as DVD-R, but as a CD - R. I think it's just the firmware of DVD writer that is too old.
  Is it possible to update this with new firmware please? because I found something in the download section for my laptop. Just drivers and BIOS of motherboard, but nothing on the MAT * an update of firmware UJ-850 s.

  Thank you very much for your answer.

  Friendly.

  Philip.

  Hi Philippe

  In my opinion you shouldn't change something but use high quality blank DVD - R TDK or Verbatim.
  Maybe you use some blank media cheap and without name.

  Have you tested with known brands?

• Satellite Pro P100 - GPU and CPU temperature question

  Hello

  I took my Satellite Pro P100 totally out, clean the radiator and vents.
  Also applied new thermal paste.

  The GPU is idling around 50 ° C fan always on
  The CPU is idling around 40-45 ° C fan always on

  To my other Qosmio G30 with a Geforce Go 7600, I got Idle at 35-38 ° C and about the same CPU!

  Then, normal time for the satellite pro or are there settings that I could use to reduce times?
  BIOS is the last of Toshiba, toshiba driver and win 7 power managemnt powersaving...

  Kind regards

  > The GPU is idling around 50 ° C fan always on
  > The CPU is idling around 40-45 ° C fan always on

  I put t think its too high in my opinion the temperature seems ok.

• Satellite Pro P100 - display 1440 x 900 upgraded to 1680 x 1050

  Hello

  I have a defective Panel in my Satellite Pro P100. Model No.: PSPAHE - 001001GR.
  Currently, it is a sign of Lp171wx2 with a resolution of 1440 x 900.

  I can change it for this Panel: LP171W02 with a resolution of 1680 x 1050?
  Will it recognize kind of Plug-and-Play? Better resolution and running as before. Or does not recommend or not even possible?

  Thank you very much in advance,
  Schwieger

  Hello

  I think he can.
  I know that the different models of Satellite P100 were equipped with two type of poster:
  17.1 inch, WXGA + (1, 440 x 900), color TFT display high brightness of amorphous silicon.
  17.1 inch WSXGA + (1 680 x 1 050), color TFT display high brightness of amorphous silicon.

  I m not very good if you could use the LP171W02, but the laptop would certainly deal a 17.1 inches, TFT WSXGA + (1, 680 x 1 050).
  You can also order a compatible part of a Toshiba ASP in your country.

• Satellite Pro P100-327 (PSPA4E) - none follows her Win 7 clean installation

  Hello

  I just clean installed Win 7 Home Premium (64 bit) on a Satellite Pro P100 - 327 (PSPA4E) which was bought in November 2006. He was previously under XP. I never installed Vista, even if the laptop is Vista Capable badge.

  I followed the recommended order of installation of the bios/driver/software Win 7 but I have now no sound at all. Everything I've tried so far has failed to fix.

  The laptop has a Conexant based with harman kardon speakers audio solution. Win 7 installed the following driver, which brings the info.

  High definition Audio Device (Microsoft Driver version 6.1.7601.17514 as of 11/19/2010) and status of the device: this device cannot start. (Code 10)

  Hardware ID:
  HDAUDIO\FUNC_01 & VEN_14F1 & DEV_5047 & SUBSYS_1179FF31 & REV_1000 HDAUDIO\FUNC_01 & VEN_14F1 & DEV_5047 & SUBSYS_1179FF31

  There is a second exclamation mark in device for a more Manager unknown device / uninstalled the device driver with an ID of ACPI\SMCB000 material (display code 28) but I don't know what is this device!

  Anyone have any suggestions on a fix for my sound problem?

  Thank you!

  Martyn

  ACPI\SMCB000 could be the infrared device.
  Perhaps his need in order to use the remote control.

  I also looked for VEN_14F1 and DEV_5047
  It seems to be the HDAUDIO Soft Data Fax Modm SmartCP of Conexant
  http://www.PCIDatabase.com/search.php?device_search_str=5047

  I checked the page of the Toshiba driver for Win 7 drivers for similar laptops Sat P105-xxxx and found the driver here:

  [Drivers of Toshiba U.S. page | http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=1598605& rpn = PSPADU & modelFilter = P105-S6227 & SelCategorie = 2756709 & selFamily = # 1073768663]

• Satellite Pro P100: What is the part number for Toshiba for a 2 GB memory module

  Unable to find any sort of emailing this issue so I posted on the forum. Of course this info should be more easily accessible without having to ask.

  What is the number of part of Toshiba for a 2 GB for a PSPA4E-00F007 memory module. It's a satellite Pro P100 T2400

  http://UK.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/SUPPORTSECTION/discontinuedProductPage.do?service=UK&BV_UseBVCook ie = Yes & PRODUCT_ID = 115421

  Gives memory crucial me this module - is that correct?
  http://www.crucial.com/UK/store/mpartspecs.aspx?mtbpoid=A332E10BA5CA7304

  Found, via the Kingstons site - is this okay?
  http://www.dabs.com/ProductView.aspx?QuickLinx=4P3V

  Would be really grateful for official clarification here.

  Thank you very much

  It must be PA3513U-1M2G. Please check whether this module is compatible with your model of laptop. I think so.

  In any case I recommend to buy products of high quality like Kingston modules.

• Downgrade from Vista to XP on Satellite Pro P100

  I have a client with a model of laptop Toshiba No. Satellite Pro P100-434.

  He had a recurring problem, DVD playback that vibrates with the image and the sound is not always in line with the image. He referred twice to Toshiba and they told me that they had replaced the DVD drive. The fault was still there so he brought for me to watch.

  I thought it is best to see if the Windows XP installation would cure the problem so installed an of my licenses. He tried for a few weeks and is now happy with our performance. Then I reinstalled Vista and checked for updated drivers. The problem is back as before.

  Now, the customer wants to downgrade to Windows XP. I understand that it is possible, but have been unable to find out where I should apply for the XP product ID. My client feels terrible about the way it has so far been Treaty by Toshiba and who also believes he paid a Microsoft Windows license. He shouldn't have to pay for another. Any help would be appreciated.

  Hello Peter

  I read your ad with a lot of attention and also hope that we can discus things.

  At first, I must say that laptop must be Satellite P100-434 with PSPADE part number. If you want to check the DVD functionality test it with original recovery image. Achieve the clean OS install and test with the original DVD movie using pre-installed software. In my view, that it must be of WinDVD. Win DVD is used by Toshiba for a year, and this software works very well.

  If there is a problem with the DVD drive, please clarify this with the authorized service partner. Please note: test the full functionality of DVD player.

  Something about WXP: Toshiba supports Windows XP Home edition for this model of laptop and all the drivers, tools and utilities that you can find on Toshiba support page under http://eu.computers.toshiba-europe.com > support & downloads. Before you start to install anything whatsoever from this page to the first a download? Instructionsa facilities? document and install all the stuff following this order of installations. It is very important.

  Now something about the COMPUTER products and treatment of Toshiba: with the new notebook, you purchase a license for the operating system preinstalled. This does not mean that you have? specific? key and can activate all that you want. The alternative operating system to pay for the license. Each copy has own product ID. And don't forget, your customer has misunderstood something.

  Treatment of customer is very interesting topic, but one thing I can say for sure: a lot of people hear things that they do not want to accept and is for the most part, the grounds for claims on a? bad treatmenta?. It is very important to clarify everything and avoid all the problems.

  Good luck!

• Satellite Pro P100 Question on software pre-installed

  I bought a Toshiba laptop in July and although I am very happy with the machine.

  I'm very upset that he came with very little software that I expected at least MS works or similar for a professional laptop, but there is nothing (no spreadsheet, text or data processing)

  After spending more than £1,000. I'm a little annoyed - don't know if it's a world of Toshiba or PC Business (people, I bought it from) error.

  One of my colleagues bought a laptop the week £600 last and which have very many useful software pre-installation.

  Hello

  You talk about the Satellite Pro P100 PSPA4E series?

  If you really this machine then I put t agree with you!
  To my knowledge of many tools and utilities and additional programs have been installed on this laptop.
  Maybe a small list?
  Here you are:
  -Office OneNote2003
  -TOSHIBA utilities
  -WinDVD
  -Platinum WinDVD Creator2
  -Sonic DLA
  -Symantec Norton AntiVirus 2006
  -PC Diagnostic tool
  -Etc.

  Please note that the software package Microsoft Office OneNote offers several useful simple programs!

  May I ask why you compare one satellite Pro P100 with other laptops who don t support the same processor, the graphics card performance and additional features?

  From my personal experience of many manufacturers of laptop while customers with software pre-installed because that the performance of the laptop or simple parts (graphics card, HARD drive, memory IE) are not approximately the same mostly.

  Last but not least; I put t really understand why you're a little annoyed.
  Why you didn t check the laptop and the description?
  Do you always buy a cat in a bag?

  Really strange guy?  :|

• Satellite Pro P100-327: Audio DVD stutters

  Hello everyone, and Merry Christmas.
  Problem is that satellite Pro P100-327 won't play DVDs without stutter on audio. I tried playback preinstalled Windows Media Player, WinDVD and PowerDVD.

  All have the same symptoms, so I think that the problem is actually with the audio.

  Does anyone have any ideas or experience with this kind of problem?

  See you soon
  Martyn

  Hello Martyn

  It is not easy to give a precise answer, but I suspect that it may be because of some unnecessary background processes running. No doubt, something is running in the background and the activity of the CPU to the extreme. I had similar problem and it was because of the running application antivir (scan disk HARD and almost at 100% CPU activity).

  Check this possibility.

• I can't write CD on Satellite Pro P100-347

  I was recently bought a Satellite Pro P100-347 with Windows XP MCE installed as a desktop computer (the store didn't inform the person who has bought a laptop that was not networked). We have purchased a full copy of Windows XP Pro and booted from the disk, formatted the hard drive and installed XP Pro instead of the ERM and then downloaded and installed all the drivers on the Toshiba site.

  I had the "failure to obtain read handle" error starting but followed the recommendations on this site and removed the toshibarc.exe of the registry. Now, the only thing I still need is to get the CD of drivers, because even though I can play CDs and copy on their part, I can't write CD - if I put a blank CD in the drive and select the option to create the writable CD folder, I get an error that says ' D: / is not accessible. Incorrect function. "

  I downloaded and installed the DVD-RAM drivers, but I can't find those specifically for the CD. Can anyone help?

  Thanks in advance,

  Jeremy Jones

  Hello

  In my opinion, you should check the properties of the disk and click the recording tab.
  CD recording option on this drive must be marked.

  I had a similar problem and this hidden option was responsible for registration on my laptop problems

• Satellite Pro P100: losing picture on external monitor when using the DVI - D connection

  Guys,

  I have a Samsung SyncMaster 940MW LCD TV and a Satellite Pro P100 (Geforce Go 7600), recently I bought a DVI - D cable to link them together.

  Now the problem is that when I connected to 1400 x 900 LCD TV screen goes to a black screen several times (usually when there is a lot of activity or I'm resizing windows to the maximum to the minimum).

  Now, I would have thought it would be the LCD TV doesn't do not signal or refresh rate however I connected using a VGA cable and its fine - no problem just no matter how much I minimize my windows or put a lot of activity on the screen. To complicate matters even more, when I run the screens in "Dual screen" mode instead of "Clone" if I put one of them 1400 x 900 to 59hz in 16 bit it works fine...?

  Can someone help please that it made my head that I can't understand what the hell is the cause!

  I've included a list below all the different resolutions / screen modes I tried it and the result.

  Thanks for your time & help.

  Concerning

  Craig.

  1440 x 900 on Samsung 940MW Toshiba set to clone (with 32-bit color) using 3 m DVI
  59Hz - constantly flashing black screen
  60 Hz - constantly flashing black screen
  75 Hz - screen flashes black only when resizing windows

  1280 x 1024 on Samsung 940MW Toshiba set to clone (with 32-bit color) using 3 m DVI
  59Hz - works great
  60 Hz - works fine
  75 Hz - works fine

  1440 x 900 Toshiba on Samsung 940MW set on dual screen (with 32-bit color) using 3 m DVI
  59Hz - screen flashes black only when resizing windows
  60 Hz - screen flashes black only when resizing windows
  75 Hz - screen flashes black only when resizing windows

  1280 x 1024 on Samsung 940MW Toshiba set to clone (with 32-bit color) using 3 m DVI
  59Hz - no option
  60 Hz - works fine
  75 Hz - works fine

  1440 x 900 Toshiba on Samsung 940MW set on dual screen (with 16-bit colors) using 3 m DVI
  59Hz - works great
  60 Hz - very rarely flashes black when resizing.
  75 Hz - intermitantly flashes black when resizing.

  1440 x 900 on Samsung 940MW Toshiba set to clone (with 32-bit color) using 2 m VGA
  59Hz - works great
  60 Hz - works fine
  75 Hz - works fine

  1440 x 900 on Samsung 940MW Toshiba set to dual screen (with 32-bit color) using 2 m VGA
  59Hz - works great
  60 Hz - works fine
  75 Hz - works fine

  Hello

  I hope that you have enabled user s manual supplied with your device. On page 148, you will find a very interesting picture on the supported display resolution.

  I have to be honest with you and say that I am no expert DVI because my LCD doesn't have this port, just HDMI but if I have understood you as soon as you have problem with a resolution of 1440 x 900 only. This resolution is not listed as supported, and I presume that it is not unusual to have a problem.

  Sorry, but I think that you should use maximum supported only resolution 1280 x 1024.