Re: SCREEN WHITE

Similar Questions

• Satellite Pro L40 - 15A - Windows XP screen white when the cover is open

  Hey,.

  So when I closed the lid on my laptop for a while and then reopen the lid, the screen remains white (black). The only way I found to get back on the screen is to re-boot.
  In power management, I put 'Status quo' for when I close the lid on my computer and power management is ' Always on '.

  I have the latest Bios and updates to the system.

  Satellite Pro L40 - 15A
  winXP

  Any help appreciated.

  Hi ib1.

  You use the version preinstalled Windows from Toshiba or is it your own installation?

  What to update the display driver? Take a look at the Toshiba page for the new display driver:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Don t forget to look in the * archives * on Toshiba page because this model is a little older, so all of the downloads are moved in archive.

  Check this box!

• Camileo X 100-screen white

  I have a Camileo X 100.

  Yesterday, when I turned it to the record, the display shows the Toshiba logo and then it went blank.
  The indication on the buttons on the camera lights were lit at the start and then (when the display went blank) had been arrested.

  The screen remained white, regardless of the display position, even when I pressed the power button.
  I removed the battery several times and tried again with the same results.

  Any ideas?

  Any new friend?
  Do you have the cam working again?

  To be honest, I n t have this cam but a Camileo H30 and never had any problems but in your case, it sounds like serious hardware problem.

• The login screen white

  Dear all,

  When I open Skype connect earlier it is blue. Now its white background. I don't know how it happened. Providing a screenshot as below for reference.

  using windows 7 bits 32 64-bit and Skype (Professional). My version of Skype is 7.28

  Kindly help.. !!

  This is just how the new login screen looks like now. Nothing wrong with that.

• MacBook Pro screen WHITE white

  Hello

  My Mac Book Pro does not, restart after several restart and safe mode. Apple logo, green line bar proceeds at the end and screen turns WHITE.

  Need help - please.

  Thank you.

  Mac OS X - grey appears during startup

  Address start up your Mac to a gray screen. MacIssues

  Question (?) Mark, record of flashing or a gray screen at startup

  It's related, but not identical questions. Their causes are described in based on Intel Mac-Startup sequence and error codes, symbols. Solutions will be found in:

  A globe or a flashing question mark appears when you start your Mac

  Mac OS X - grey appears during startup

  In most cases problems can be caused by one or more of these:

  a. problem with the computer's PRAM - see reset the PRAM and NVRAM on your Mac.

  b. boot, directory of the drive has been corrupted - repair with disk utility.

  c. critical system files are corrupted or deleted - reinstall OS X.

  d. the hard drive is physically non-functional - replace the hard drive.

  Please note that the information I have provided is what Apple recommends, if other users will suggest different solutions found here, then be sure to what they recommend has no impact on your ability to get the Apple continuous service guarantee, if any.

  Please do not start remove disks or change cables unless you know what you're doing and have exhausted other alternatives non-invasive described here. If you perform all knit yourself which is not approved by Apple, then you will void any warranty you can have and lose any other Apple support.

  Fix the hard disk and permissions

  Boot from your Snow Leopard installation disc. After the installer loads, choose your language and click on the button continue. When the menu bar appears select utility drive in the Utilities menu. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions. Wait until the operation is complete, then exit FROM and return to the installer.

  If THE reports errors, it cannot be resolved, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you do not have one of them or none of them can fix the disc, then you will need to reformat the hard drive and reinstall the OS X.

  The main difference if you use Lion or Mountain Lion, you must first boot from the boot Recovery HD simply HD recovery to perform the foregoing.

  Reinstall Snow Leopard without erasing the drive

  1 fix the hard disk and permissions

  Boot from your Snow Leopard installation disc. After the installer loads, choose your language and click on the button continue. When the menu bar appears select utility drive in the Utilities menu. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions. Wait until the operation is complete, then exit FROM and return to the installer.

  If THE reports errors, it cannot be resolved, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you do not have one of them or none of them can fix the disc, then you will need to reformat the hard drive and reinstall the OS X.

  2 reinstall Snow Leopard

  If the disc is OK then leave FROM and return to the installer.  Proceed to reinstall OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a new copy of Mac OS X, the installer will move your Home folder, third-party applications, elements of support and network preferences in the newly installed system.

  Download and install Mac OS X 10.6.8 v1.1 updated Combo.

  Relocation of Lion/Mountain Lion without erasing the drive

  HD recovery start: , restart the computer and after the buzzer, press on and hold down the COMMAND and R until the menu screen appears. Otherwise, restart the computer and after the buzzer, press on and hold down the OPTION key until the Boot Manager screen. Select the Recovery HD and click on the arrow pointing down.

  Repair the hard drive and permissions: at startup, select in the main menu disk utility. Repair hard disk and permissions as follows.

  When the recovery menu appears, select disk utility. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions. Wait until the operation is complete, then exit FROM and return to the main menu.

  Reinstall/Mountain Lion Lion: Select reinstall/Mountain Lion Lion and click on the button continue.

  Note : You will need an active Internet connection. I suggest to use Ethernet if possible because it's three times faster than wireless.

• Satellite Pro L650 series - the error screen white balance

  Hi all
  I use a Satellite Pro L650 series. When I use the laptop for several hours, my screen becomes bad white balance. In detail, the screen clears so dazzling with the strange white color. If I open a Web site, the pictures on the website becomes blurry images.
  If I put the screen in blue, she can't make easy the dazzling color, but if I put the screen in white or green and yellow, then it becomes abnormal colors and fuzzy.

  I have to restart my computer, and this problem can be solved.

  Is there anyone encounter this problem like me?
  Could you share to me what is the problem? and what is the solution for this problem?

  Thank you very much

  Hello

  Have you noticed this screen problem laptop with mains running or simply using the battery?

  I read about the problem of similar laptop screen which was related to the Intel display power saving technology.

  In this case, you could solve this disabling this feature. Go to Intel display panel - conservation power source/battery - power tab function - saving technology display and uncheck this option.

• Am new on Apple, but when I select apps store Exchange screen white white screen only shows not something worked ok until now what have I changed

  After selection of apps on my iPad iOS store 4 9.1 changes the screen blank white screen has been modified to display the apps store when buying am new to Apple so that have I changed

  First test:

  Double click on the home button and drag up the App Store. See if the App Store is charging now.

  Then try (if necessary):

  Hold the sleep/wake and "home" button until the Apple logo appears.

  -AJ

• Satellite L555 simply freezes with black screen (White Stripes)

  Hello

  I'm having some problems with my new Toshiba Satellite L555 laptop, it is simply freeze and appears a black screen with white bands.
  He don't do it regularly, but it's annoying.

  Any suggestions?

  Hello

  The possible reasons:

  1. a malfubction graphics card
  Malfunctioning of the internal display 2. You can view the external monitor to see how it is?

  As little as possible:

  1 a graphics driver
  2 operating system itself. Have you tried to reset to factory settings (F8)?

  Otherwise, you must contact the Asp (SAV) in your country. Your laptop is still new and under warranty, so it will fix it for free.

• 5 s screen white iPhone?

  Hi all (32 gb, iPhone 5 s after the warranty, protected with Mophie juice more, intact screen, OS update status unknown)

  Was checking my emails as always when I clicked through an Amazon site it seem'd to fight a small display of an image from the browser and then the screen becomes empty, the phone itself seems to work very well as the purge of the white tale tell through you get in the corners when there's a totally black screen hold the home button active on siri function voice talks but screen still remains blank when connected to iTunes it guests me to enter the password to connect the phone vibrates to indicate that it is connected, have tried a reboot and forced reboot iPhone seems to go through the motions but screen remains blank with the purge normal through lcd I have to do a factory grace reset distance to find my iPhone.

  EDIT: Just as I write this I removed the iPhone connected usb charger and the screen came to life briefly and I entered my access code before the screen went white to new iTunes it synchronization device now, which means it all?

  To find out if it is hardware related, to connect in recovery mode and set it up as a new device, without using the backup later. Configure the personal settings manually. If the screen works after that, use the backup to restore.

  Use iTunes to restore your device to factory settings - Support Apple iOS

  If you are unable to update or restore your iOS device

  If the problem returns, the phone settings can cause this. Did you also check, if the proximity on the top of the screen sensor is covered by any kind of protective film?

  The zoom function is activated? Check by double clicking on the screen with three fingers, this will disable the zoom feature.

• Impossible to install other systems on HP desktop PC operation p2-1334-screen white/blocking

  Hello

  I have a desktop HP new-1334 - AMD E1 - p2 1200 Vision. Packed with Windows 8 x 64.

  I want to install Linux distribution: Ubuntu 13.04 on it.

  Problem: [I get a menu of text mode Linux distro who ask me if I want to install, after you have selected for installation, the screen goes black and white and the key NumLock on and finally the PC light crashes, no more stocks or noises]

  The steps I did:

  Changes to the BIOS:

  -Boot order (to start from a CD or USB drive)

  -Option of secure boot disabled

  Result [Fail]

  Windows 8

  Consultation: changing PC settings

  Selected to restart from a CD or USB drive > advance option settings

  Result [Fail]

  I love Windows 8 and I also like Linux distributions.

  Is there something on the new machines that have prohibited the Linux operating systems to be installed on them?

  Linux distributions are Malware within the new UEFI standard?

  >

  >

  >

  How can I fix the vacuum/locking PC screen to install Linux on the PC?

  Thank you.

  Thank you for everything.

  I managed to install Ubuntu 13.04 on my new desktop PC.

  Very difficult and even rewarding that I did.

  Please use an image on the screen of the BIOS on the Secure Boot.

  It wasn't the only problem that I needed difficulty. I will try to cover all the steps that I did.

  1. I used a disc external HARD with an old encrypted installation of Ubuntu 13.04

  2 - Ran the Ubuntu live cd and then invite them to try a regular install

  3 quit Setup

  4 - Ubuntu Live CD to return to one an essay on operating system

  5 took the Gparted program (to format HARD drive and partition of creation)

  6 deleted all data from this external HARD disk (unmounted partitions encrypted and then erased)

  7 created the linux partitions. ext4 - labeled root

  8 - start the installation from the live cd

  9 chose to install Linux alongside Windows 8 (installation of Ubuntu on the external USB hard drive)

  10. it worked. Jay!

  Of course prior to all the steps that I had to intervene with this BIOS configuration:

  Before installing:

  1 - disabled secure boot

  2 - legacy boot: enabled

  3 - fast boot: enabled

  4-boot order (of CD)

  After installation

  1 - boot change (from USB HDD) order

  Now I get the dual-boot menu.

  Much to inspire but fun!

• ERRORS OF DRIVER DELL INSPIRON 1525 WON'T BOOT SCREEN WHITE! HELP PLEASE!

  I DON'T KNOW WHAT I'M DOING WRONG, I TRIED SAFE MODE AND I GET THE SAME THING, I TRIED DOING DIAGNOSTICS AS WELL, ALL RIGHT.  PLEASE HELP SOMEONE. NONE OF MY LIGHTS LED FOR POWER SUPPLY, BATTERY, HARD DRIVE, WIFI OR BLUETOOTH ON ALSO WHEN I TURN ON MY LAPTOP, AS THEY NORMALLY DO. I TURN IT ON, AND AFTER THE LOGO WINDOWS, BLUE LIGHTS FLASHING ON MY WEBCAM AND THE STAY OF THE WHITE SCREEN, I'M GETTING NO SOUND IF I PLUG IN A DEVICE INSIDE.

  SOMEONE KNOWS HOW TO SOLVE THIS PROBLEM!

  

  Do not safe mode with network. It will try to load too many drivers.

  Try mode safe mode with command prompt since it will charge just a necessary drivers. If it does, you can try the above commands.

  Only other option would be to try to start with a Linux LIVE CD/USB. (IE Ubuntu, Mint, or puppy or another other Dist you prefer).

• my system restore does not work I get a screen white how fix this?

  do not know why it does this

  Do you mean your restore page of the system restore just says calendar system in the title bar and the calendar is just a blank white screen?

  Looks like your file jscript.dll became somehow not registered so you can re-record it.

  There are probably a few other things that do not work you know yet, so fix them all at once.

  Re-registration of these DLLs is correct, even if they do not need renewal.  You can also re-register the dll before the scans that can solve the problem, but the scans are always recommended.

  Click Start, run, and in the box enter orders following one at a time.  Click the OK button to execute each command one at a time.

  regsvr32 jscript.dll
  regsvr32 vbscript .dll
  regsvr32 /i mshtml.dll (it's a look of slash)

  The last order for mshtml load the DLL but can also contain a harmless warning depending on your environment.

  Check your system restore calendar now.

  The symptom of the problem of fixing and fixing the problem are two different things.

  System Restore is a frequent target of attacks by malicious software.  If SR was working before and is now afflicted, run some scans and then fix any problems.

  Remember that the system restore is not a time machine.

  Download, install, update and do a full scan with these free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  They can be uninstalled later if you wish.

  If sfc/scannow solves your problems, I'll send you (or your charitable organization preferred) $10 American.

  Please note that I did have to send $10 to anyone, ever.

• SCREEN WHITE AFTER TURNING MY HP WITH A 3.2 GHZ AMD PROCESSOR

  only a white screen when I turn on my hp with win xp home and a 3.2 giga hertz processor.  I think it might be a loss of video and I need to install a good video card in one of the pci slots.  However, I know someone must have experience this problem.  Let me know where to start.  I have a friend with additional video cards, so I can try that as a solution.  does take a full win xp reinstall.  What do you think.  e mail me.

  Thank you

  Don h. young

  Hi DON. BIRMANE1,

  1. you receive an error message on the white screen?

  2. did you of recent changes on the computer?

  Check if the problem persists in the activation of the VGA Mode and display the results.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Also to connect the computer to another monitor and check if the problem persists.

• Main user account: can not log on any more. Just get screen white wallpaper.

  My laptop Windows xp has three user accounts.  The main account I use is no longer allows me to sign.  When I click on the name, enter my password, I get a screen with only my white wallpaper - no icons, no toolbar at the bottom.  Nothing.

  Any ideas?

  Don't you see the same behavior with other accounts?

  Here is some information General/ideas for you to check, see if this is your problem and if this is the case, we'll fix it.

  You see only your background image and the wallpaper?

  Miss all your desktop icons and you don't see the taskbar at the bottom of the screen or are simply missing icons and you can see the taskbar at the bottom?

  Check the simple things first.  Right-click on an open space on your desktop, choose Arrange icons by and make sure the option show desktop icons has a check mark next to it.  This will work if you don't miss you that the desktop icons, but still see the Start button and the taskbar.

  If only you can see your wallpaper background picture and don't see the desktop icons and no start button or taskbar, this means that the explorer.exe program does not run (and it must be running) or the explorer.exe program are usually afflicted.  A good way to think about at the moment, it is that the process explorer.exe "is" your desktop.

  If this is the case of malware in general prepares.

  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  Fill in the blank: my system worked well until: _

  Sometimes your anti malware program to quarantine (and indeed remove) your file explorer.exe (or other critical files on the XP system) if it finds that the file is infected.  The file may really be infected, but you can know for sure and then reconsider your anti malware options.

  First, you need to get your work desk, then you can solve your problem of potential malware.

  Of your background image, press CTRL-ALT-DEL and open Task Manager.

  Look at the processes tab and if the process explorer.exe is not running, start it as follows:

  In Task Manager, click file, new task, and in the Open box, enter:

  %windir%\explorer.exe

  Click OK and see if get you your office.

  If explorer.exe is already running in the processes tab, it is likely that the object of the affection and will need to be replaced (which is not difficult).

  If you notice that the explorer.exe process is already running in the Task Manager, highlight the explorer.exe process, and then click end process to stop and start a new explorer.exe process as described above.

  If things look right now, your system is still not fixed, but it should be enough usable so now you can fix it.

  I would start with these scans:

  Perform scans for malware first, then these scans by operating clean, difficulty of problems:

  Download, install, update and do a full scan with these free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/

  SUPERAntiSpyware: (SAS): http://www. http://SUPERAntiSpyware.com/

  They can be uninstalled later if you wish.

  The scans by operating clean, fix any problems.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• My friend keeps getting a white screen (white)

  My friend continues to become a blank (white) screen on its new computer (Vista).  I used to do, but somehow he cleared.
  I suspect that this is a flaw in Vista.  I got rid of my screen by pressing the Windows logo on the keyboard.  (HP computger) Got a pop box that allows me to close this screen.  It works this way on its new Acer.  Any suggestions?

  Thank you
  placebow

  Hello Whispersfromholyghost,

  Thank you for your response.

  I cannot give a specific cause for the blank screen.  I am pleased that the 'System Restore' helped.  Below, I added another link that should be able to help the cause of this problem and also gives information about the system restore.  Please let me know if you're still having problems.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista:
  The System File Checker tool
  The System Restore tool
  http://support.Microsoft.com/kb/936212/

  Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.