Re: Store Alu 2.5 "USB 500 Gb HDD no longer moves up not - LED is red

Similar Questions

• New external USB 500 GB Portable Hard Drive appearing is not in Windows Vista

  I connected a new 500G portable hard drive to a front USB port on my HP PC (with an AMD Phenom X 4 image processor), under Windows Vista Home Premium. Windows presented a pop saying that the driver has been installed, then he said: USB device installed. The software of the device has been installed successfully and is ready for use.

  However when I looked for the drive in Windows Explorer it wasn't there. I read in this forum, and using the information that I realized that I accessed the computer on my PC management - up it only shows C: drive and D: drive image factory, but below that, when disk 0 is assigned to the C: and D: drives it shows disk 1, unknown, uninitialized. Assuming that it is the car in question, I tried to initialize the disk, but then the error FUNCTION INCORRECTE.

  I don't know what to do at this point. If the player has not been assigned a letter, there seems to be no way to transfer or partition.

  A new drive must be formatted. That is why it is sjowing up as disc 1, unknown, uninitialized.

• The E of Toshiba STORE alu external hard drive.

  Hello

  I have a laptop Toshiba P500-16 t.
  Yesterday, I bought a disc external hard Toshiba (E STORE alu 750 GB USB 3.5 "), it works perfectly, but today the red and blue light no longer works, the hard drive still normally works well.

  Try it in another PC or another USB Port, if the LED still does not work then you can go back to the place of purchase for a replacement drive.

• Toshiba StorE Alu 2 s 1 TB 2.5 USB3.0 SATA controller card "external HARD drive

  "The controller card of my" Toshiba StorE Alu 2 s 1 TB USB 3.0 2.5 "Portable external hard drive" malfunctioned. I replaced I replaced it with Western Digit controller card but my data are not displayed using this USB-SATA controller.
  So I think I have the same needs as my original. So how and where can I buy this card controller controller at Toshiba and my data appears as been replaced by the same?
  Kindly reply me as soon as possible.

  It is always difficult to find these parts. In my opinion, you should contact the nearest Toshiba service provider and ask for help.
  They should be able to get such parts.

• StorE Alu2: two ports USB ports or not?

  Hi all

  I can't understand that the series of external hard drive StorE Alu2 takes 2 USB ports, to work or not.
  There are two exams in the Amazon saying it does:
  (OLE http://www.amazon.co.uk/gp/product/B00472861W/ref=s9_simh_gw_p147_d0_g147_i1?pf_rd_m=A3P5ROKL5A1 & pf_rd_s = center-2 & pf_rd_r = 0VS71D4V6ZDJWW3JSKA6 & pf_rd_t = 101 & pf_rd_p = 467128533 & pf_rd_i = 468294),

  but there is no confirmation of nowhere elsewhere.
  Even the manual States produced with all the letters that he only use a single USB port
  (http://www.toshiba-multimedia.com/eu/store-external-hard-drives/alu-2-25/).

  Anyone able to help?

  Thank you!

  > Manual States even produced with all the letters that he only use a single USB port
  > (http://www.toshiba-multimedia.com/eu/store-external-hard-drives/alu-2-25/).

  Page Multimedia Toshiba says it supports a high speed USB 2.0 ports and you can see from the photos on this page.

  > I can't understand that the series of external hard drive StorE Alu2 takes 2 USB ports, to work or not.

  I think it depends on the USB ports on the computer/laptop.
  The common standard USB should provide 500mA but this may be different and in this case the USB hard drives would not get enough power to operate correctly. In this case, you need a Y USB cable to connect an external USB HDD to two USB ports.

• Toshiba Store E TV 3.5 "500 GB PA4208E-1HE0 - no visible files

  I have an external USB HARD drive MODEL: PA4208E-1HE0 Toshiba Store E TV 3.5 "500 GB Multi Media Player and I can not see my files to.
  Is it possible that I can use to get back them?

  When I view the drive in 'my computer' it shows that there is data, but when I open it, there is nothing

  Hello moeketsisehloho,

  It is not possible to record with the TV store.
  There are 4 files (music, Photos, videos, Toshiba) default settings.
  If you plug the TV StorE on your computer and you can´t see these files, I think you have removed the.
  That you have set the TV to the default store or create this 4 files manually.
  I suggest to format the TV store front. The way to do it, you can find in the manual on page 18.
  Then you should be able to copy the files to the TV store.
  If you can´t see the menu, if the TV store is connected by HDMI to the TV, I think you need to bring the TV StorE to a partner of Service allowed next to you.

  Best regards

• STORE ALU, 1 TB 3.5 "only appear not

  Hello

  I have a Toshiba STORE ALU 1 TB 3.5-INCH that was working fine until a few days ago, when we went.

  Now, when I turn it on, the indicator it works (turns red first and then to blue), but the drive does not appear on one of my PC (Windows).

  I tried to connect to all the different USB ports but no luck.
  I can't see it in the device either Manager.

  Any suggestion would be appreciated...

  Thank you

  Shankar

  Hello

  Have you tried to plug the drive external DRIVE on another computer?

  I found this FAQ from Toshiba on the Toshiba Stor.E Alu (3.5 "- 1 TB - USB 3.0")
  http://APS2.toshiba-tro.de/KB0/SPD4603LW0000R01.htm

  It is said that the AC adapter or the AC adapter cable may be broken
  But from my point of few, the HARD Drive LED (indicator) show the status of the HARD drive.
  The HARD disk is turned on and that for this purpose, the power seems to be correctly provided on the HARD drive.

  This means that the cable and the AC adapter should be OK.
  I think that in your case the HARD disk (inside) may be broken.

• STORE ALU 3.5 "light blue showing but not connected.

  I have a HDD external Toshiba Store Alu. I have problems to connect to my computer recently. It was working fine until 2 days ago but now all I have is light blue, but I hear that the drive does not work. The last computer I logged in, I had a flashing blue & red light which I know means it is not getting enough power - since then, it does not work on any computer.

  Any ideas? If the disc is defective, I can get the recovered data?

  Thank you

  Hello

  I m not owner of this external HARD disk but it sounds a bit like a hardware malfunction.
  Maybe the HARD disk has crashed in such a case, you would lose data

  It s a 3.5 HDD right?
  Well, perhaps you could remove this disk of the case and could connect to a HARD drive controller internal office PC.
  You can check if the BIOS recognizes the HARD drive and internal hard drive

  But if the BIOS would not recognize the HARD drive then it would mean that the HARD drive is dead!

• Store alu 1 TB - 8.3 filenames

  OS: Windows Vista Home Premium SP2
  PC: Laptop HP 6735 s

  Yesterday I finally have unboxed my StorE alu 1 TB and started to copy files from my portable 250 GB Medion drive-and-Go for it.

  Some files and folders have now received the old as 8.3 file names "blahbl ~ 1.zip".

  The Toshiba and are both the Medion formatted FAT32 (the Toshiba out of the box).

  Has anyone encountered this before and figured out how to fix it?

  Something to do with the SATA drive?

  Also, I noticed that some files and folders that are copied in the store will not copy to the Medion or my laptop - even when I try to copy one at a time.

  UH... help?

  > Both the Toshiba and the Medion that are formatted FAT32 (the Toshiba out of the box).
  > Has anyone encountered this before and figured out how to fix it?

  Hmm, as far as I know you could disable the creation of 8.3 name on NTFS partitions:

  Type of RACE: * fsutil.exe behavior set disable8dot3 1 *.

  But I don't know if this will be functions with Fat32 Mr. in the worst case, you will need to change the NTFS file system

• External drive USB 500 GB PX1394E burp and more

  Since yesterday, my external 500 GB Toshiba USB drive burp more.
  The LED becomes red instead of blue when I turn it on. Needless to say that my entire CD collection is on it, so it is quite a mess.

  What are my options now?

  I bought the external drive in Germany, a little less than a year ago, model Toshiba PX1394E - 3 50.
  Stupidly, I can't find the receipt anymore, so it won't help if I just bring it back to the shop.

  Where Toshiba can I apply for?

  How can I open the case to see if the drive is broken, or just the USB interface?
  The enclosure has two small screws, but by unscrewing seems to have no effect, it seems that they are just to fix a foot plate support.

  Help, please! It is a nighmare!

  Thank you kind
  Ulf

  > How can I open the case to see if the drive is broken, or just the USB interface?
  Don t what a controller can be broken. If something is broken, then this might be just the HARD drive.

  If the HARD drive burp more then the hardware failure is possible and only a replacement can help you. Stupidly that you can't find the verification of sales because it is necessary to get a replacement under warranty

• PX1394E - 3 50 (500 GB HDD USB 2.0) not recognized by Win XP SP2

  Hello. I just bought and traded because I thought the first was faulty, a PX1394E - 3 50 500 GB HDD USB 2.0 external hard drive that uses Fire Wire, USB. Now I ve tried all USB devices, to begin with it uninstailling everything on we / off on to just pluging it when we / off and it keeps saying be the devide was not recognized and it doesn't propperly (small box pop up bottem left of the screen)

  Now Issve exchanged it once already, and he said that the unit was defective, but having exactly the same problem with two different cameras? This seems a little more bad luck for me.

  If anyone can help, that´d be great.

  -Dan

  Hello

  You have software of Regen with your HARD drive? I don't know if this can help, but check the Toshiba download page and you'll find a version for Windows XP Home edition. Maybe this will help.

• Lenovo USB 500 GB hard drive not Accessible?

  I recently bought a Lenovo 500 GB USB external hard drive. I kept all my back ups and video files it contains. One day I plugged the external hard drive to my laptop and do a backup of file inside and forgetfully system restore left the hard drive and my computer laptop battery for watch a movie outdoors. The evening when I went back and checked, I found my system shut down due to the discharge of the battery and when active windows had incomplete restoration and new restoration of the drive HARD has been giving a cyclic redundancy check error message. I installed a new windows 7 and I checked my Lenovo 500 GB external HARD drive, it was not accessible more and following problems were encountered

  1 system takes too long to appear Local of Lenovo 500 GB of hard disk drive icon.
  2 local Lenovo 500 GB disk icon HDD is not accessible or cannot be formatted.
  3. when any pen drive or usb plug is made, it is never detected or answered by system until the external HARD disk USB is disconnected from the computer.
  4. start of the splash screen stops when USB external hard drive is connected during boot and startup continues as soon as it is unplugged.
  5 file system went from NTFS to HTFS.
    
  What exactly is the problem? Is there anyway to recover my files from the external hard drive. I tried to share this drive and allowing the permissions, but everything is messaged inaccessible place.

  It seems that the hard drive has failed. Contact the manufacturer support for assistance. The drive can be replaced.

• Exchanging the 500 GB HDD with a SSD 128 GB on a fancy m6 1101-so

  Hello

  I was trying to replace/change the 500 GB HDD with a 120 GB SSD installed on this laptop. My plan was to use the SSD as boot drive and the HARD 'normal' storage disk in a cradle of HARD drive in the optical drive Bay. But my problem is that during the backup of the disc at first, I did install, the installation leaves boot loop once the installation is finished and he wants to start windows for the first time.

  All those who know what is my problem? At the beginning I had problems with even getting to the start screen, but I solved it with the boot and installation of windows with the BIOS in legacy mode.

  Hope that there is a magician who could help me.

  You cannot use recovery discs that you made from 500 GB HARD drive to restore a 120 GB drive in most cases.

  You can clone the SSD HARD drive. (Note: total capacity used on the HARD disk must be less than the total size of SSD for cloning to work). Use Macrium reflect free cloning tool & SATA Adapter USB to connect the SSD for laptop by USB.

  Concerning

  Visruth

• My samsung 500 GB HDD ejected automatically

  When I connect samsung s2 500 GB HDD in my laptop (a vista x 64) it detected normally and after a few seconds the pilot ejected himself and repeating the process. Sometimes it works normal but not for long

  I checked "disable computer alow device" in the power management. still continue it problem.

  the unit works fine when I connect to the pc which has XP

  do I have to install any driver software for this since samsung does not provide any software.

  I see no reason for this behavior, paricularly the device works very well on a sys winxp, the only possible reason I can think of, it is assuming this drive does not have its own scource pwr, then the usb connection does not provide sufficient pwr

• USB port from a digital Multiport card will not read the external SSD drive. Right USB - c for the USB adapter works fine.

  USB port from a digital Multiport card will not read the external SSD drive. Right USB - c for the USB adapter works fine.

  It's a new 12 '' MacBook