The E of Toshiba STORE alu external hard drive.

Similar Questions

• Toshiba 500 GB external HARD drive is no longer detected - after only 1 hour

  Hey,.

  I finally got my Toshiba 500 GB external hard drive delivered today. I had no problem setting up and to turn my laptop on, it immediately recognized and I started to transfer things for her.

  However, I accidentally stood on the USB cable to the HARD drive and disconnected. I plugged it in, but my computer did not recognize.

  Nothing I've tried has worked, always, the laptop does not recognize the hard drive.

  Please help, I've only had the one hour thing, and it already does not work! I really hope that I have not only lost £56...

  All advice is appreciated, thanks in advance.

  NEW: My father just tried plugging the HARD drive in the desktop PC is on the ground, and as soon as the USB when it is in the port, you stop the computer... causing him to lose a lot of important business email, he wrote. It starts the computer, the USB and you stop again... and this has happened 3 times until he gave up. What on Earth is wrong with this thing? I've never heard of a USB cable, stop a computer permanently, or a hard drive that does more after an hour of use...

  Post edited by: Sam_V631

  The USB port on the HARD drive may have been damaged and may be causing the PC detect a short power.

  You can try another USB cable? If it is not the cable, then the HARD drive should be sent to a Service Center for repair or replacement.

• What is the right way to stop an external hard drive please?

  What is the right way to stop an external hard drive please?

  Take it down to disk utility

• How can I make the best use of a new external hard drive and a new catalog full of photos just loaded into Photoshop elements 14 Organizer?

  How can I make the best use of a new external hard drive and a new catalog full of photos just loaded into Photoshop elements 14 Organizer?

  Keep all the files on external hard drive image?  Nothing else and no pictures on the desktop?

  Keep all image files both places?

  What is the best way to go through thousands of images in the Organizer to identify and place them in files?

  Once I've placed a file, I just leave it in the entire catalog or a way indicate to me that it has been sorted?

  As overwhelming, any tips/shortcuts/schemes, you can offer are welcome!

  As I only have the version of the EP, here is some info on the organiser:

  https://helpx.Adobe.com/Photoshop-elements/how-to/use-elements-Organizer.html

  Independent of how this feature works, you want to have your photos in one place and have a backup (second copy) somewhere else. All hard drives will not be successful at some point - some more early, some late - never trust to have your files in any safety devices if they are on a single disc. Once you have your sorted, it would be useful that you will organize/name/tag new photos immediately if the task is relatively short and simple. I copy my photos on my internal hard drive for my camera, take a quick look with preview to see who needs some changes and then decide where to put them - either drop them immediately after naming them or bring in an editing application and then file them away.

• Since the update of Vista on my external hard drive problems

  I have a problem with my external hard drive. A week ago I reinstalled Windows Vista Home Premium on my PC. Everything worked very well, my external hard drive, too. But after installing all the new updates and SP2 my external hard drive has problems. If I copy something from her, or just listen to the music is recorded on it, so overall if I work with her, after 1 to 3 minutes it stops working. I have to sign in to get access to it again. But before installing SP2 updates after SP2 everything worked out very well. So I think that there is a problem with SP2 or the following updates. My Pc is a Dell Dimension 9200 and the external hard drive is a Verbatim 1 TB external hard drive and USB 2.0

  I tried to bbot with Ubuntu and delete the Autorun.inf. Now everything works fine again.
  Thank you

• I backed up on an external hard drive of PS4 and cannot open it on my iMac with OS 10.8.5. He says to reinstall, but the only version is on my external hard drive. How can I transfer it to my iMac?

  I backed up on an external hard drive of PS4 and cannot open it on my iMac with OS 10.8.5. He says to reinstall, but the only version is on my external hard drive. How can I transfer it to my iMac?

  Hi aliceag,

  You can please download Photoshop CS4 from the following link and install it

  Link: other downloads

  Kind regards

  Tanuj

• Toshiba Stor.E Canvio HARD drive does not appear

  Hello

  I got a Toshiba Stor.E Canvio for about 2 years without problems

  By using the external drive recently and the USB cable is removed accidentally. After attempting to connect the USB on my Mac again once the external HARD drive does not appear in the Finder.

  Passing through the disk utility, the hard drive is visible, but I am unable to check or repair the disk.

  The message I get is

  "Peut-t disk utility repair this disk. "Save as many files as possible, reformat the drive and restore your backed up files.

  The HARD drive itself is turned on, the light is on... but I'm stuck now

  Any help would be appreciated

  Gary

  I m not iOS expert and, therefore, I cannot recommend to any advanced troubleshooting but recommend you check out this thread:
  http://Apple.StackExchange.com/questions/130304

• Toshiba ph3100u-1exb external Hard Drive will not stay On

  Hi all.

  I recently bought a Toshiba ph3100u-1exb 1.0 TB external hard drive. It works fine, but the problem that I am running is that it does not stay on for more than a few minutes. I don't know that its a kind of function, but if there is a way to turn it off, energy saving, I would have the accessible reader at all times, I use the information stored on it a little.

  When he died, I can always press the power button to bring it up, but I would like to have it on all the time. Is it at all possible to do? A setting on the drive, or even within Windows?

  I have the player hooked up through a USB cable, this PC is a little older and does not use for hard drives-eSATA cables.

  Hello

  In my opinion, the HARD drive must be checked with different computers and different OS (Vista, Win 7, Win XP). If the external HARD disk doesn't work using different systems and computers then it s definitely a HARD drive problem.

  I have 2 different external drives a HARD drive died and I had to replace it.
  In my opinion, if a HARD drive starts to malfunction then it s mostly a hardware related issue and there is nothing to replace the defective drive

• Problems with the PX1267E - 1 32 300 GB external HARD drive

  I got the toshiba (px1267E - 1 32) (300 GB external usb drive)
  At some point I plugged the usb taken in upside down (for a bad reason he did) and of course, it did not work.
  Hmm, I thought that is burned.

  But when is reconnected it quickly he was again detected only on mode slow usb 1.1. I guessed the drive inside was a standard drive, so I removed the drive from the case but. When I put in a different usb transmission case, it is detected and also the correct size (although its more than 200 MB). But it is not formatted.

  I gues the chip of the original envelope has a kind of special way of partitioning. But the data is still on the disk and if I connect it to the orriginal chip sound as good. But still the speed slow usb. Is there a way to read the data by using some kind of software? I save the data and put the disc in another usb enclosure.
  So, to make it short.

  I have a disc to work partially because the usb controller is a little broken (speed slow usb 1.1)
  I tried to read the disc by using the IDE or another external case usb, but windows does not include the partitioning.

  I need to backup data, but need to type SME software so I can unzip the partition.
  PS its not passworded I never put a password on it.

  I hope someone can help me

  Robin

  > I guess the chip of the original envelope has some kind of special way of partitioning.
  It s no matter what chip it is. This has nothing to do with the partitions on the HARD disk.
  External USB controller can be IDE or SATA controller.

  You said that the external HARD drive has been recognized
  > When I put in a different usb transmission case, that it is detected and also the right size

  I put t understand how the external HARD drive has been recognized by the OS, but generally you should see it in disk management.
  We could also see which partitions are created.

• Toshiba 500 GB external hard drive is no longer recognized

  I have a Toshiba 500 GB USB 3.5 "external hard drive of office which was working perfectly until what a few days, but now it is no longer recognized by my computer (the device does not appear on"my computer"as it used to). Help, please!

  I had a similar problem with drive external 3.5 ". After a trip he stop working. In my case, the index has been connected to the PC (not portable) IDE channel and formatting.

• Clicking on Toshiba 1 TB external hard drive

  Bought my external hard drive Toshiba Canvio black 1 TB in July, and a few days ago I heard / felt continuous clicking. I've been more than prudent with my drive, never give up, tilting ever and never disconnect when the light flashes. Somehow I could possibly revive? Sometimes after I have unplug it and plug it back, there is no clicking for an hour and my files are readable, but then he starts up with the clicking again

  Hello

  You should be troubled if the HARD drive starts making strange noises.
  It could be a first sign of a HARD disk crash.
  On the other hand, my HARD drive clicks also but not always it happens sporadically
  I couldn't find a reason for this, but I created some backups to be on the safe side.

  I think that you must back up the data too.

• Toshiba 320 GB external HARD drive all of a sudden think this is my 160 GB drive!

  PC: Toshiba Satellite A305D-S6848
  Accessories: Toshiba 320 GB USB external hard drive; MODEL: HDDR320E03X
  Toshiba 160 GB USB external hard drive;
  MODEL: HDDR160E03X

  The other day I started my laptop with these two drives already connected. Suddenly, my 320 USB drive, that's half full of music and video, insists that it is the only capacity of 160 GB and if it is full but shows no files.

  I already tried to run diskcheck... nothing helps... Suggestions to recover the date on this drive because it is only a few weeks old and has all of this information on this subject.

  Thanx

  It works on another PC? Maybe the user has installed a bad USB driver or something.

  If this does not work on another PC, you can try data recovery tools. Google search for "data recovery utility.

• Gets the air space, copy Photos on external hard drive.

  If I copy and paste the picture on a USB application (which works very well, I have all my pictures) is the photo still be there when I open the app copied on my computer once I have them deleted on my Mac? I would like to remove all the photos from the first photo app that I have to make room, but keep photos somewhere (not iCloud).

  I would also like to know if after I open the old one and adds new photos of Photos on the Photos app, which is now on my external hard drive. (somewhat like fusion of the old and the new) Is this possible?

  Thank you very much!

  Make sure the drive is formatted Mac OS extended (journaled)

  1. exit Photos

  2 copy the library of your folder on the external drive.

  3 press and hold the option (or alt) key while launching Photos. In the menu that appears, select "Choose Library" and navigate to the new location. From there it will be the default location of your library.

  4 test the library, and when you are sure that all is well, trash on your HD internal for free space.

  Concerning

  TD

• Use the TC for backup and as external hard drive

  Hello

  Can I use TC for backup and as external hard drive?

  If yes then when it is full, TC erase my personal data I have stored in TC as a hard drive or erase the oldest backups?

  1. Yes, but you shouldn't. Your working data and backups must be on separate drives in case one of them goes down.

  2. Time Machine will not erase the data it did not originally there.

  (142739)

• TOSHIBA 500 GB external HARD drive

  Hello

  Please I need help...

  My system is not able to recognize all available on my hard drive capacity.

  What should I do to use the hard drive full?

  500 GB is the ability, now its GB full but only 256 and the rest I can't fill, I get a message 'not enough of free space.

  Thanks in advance for you're help!

  Luka

  That's the problem with the file system of your external hard drive,
  Check your external hard drive file system.
  -Open my computer
  -Right-click on your external hard drive
  -Select Properties
  -written to see if it is the file system FAT32 or below this (FAT or FAT16)
  you will need to format it in NTFS. Why? I'll explain later.
  -to format your external hard drive, right click on the external hard drive.
  -Select format
  -in the file system drop-down menu, select NTFS
  -Choose the quick format
  -Press OK

  After the process is finished, you can now copy the file.

  EXPLANATION:
  This happens because the FAT family of file system have the 4 GB limit only (if I'm not mistaken) in the 1 file size.
  NTFS have much higher than that, but I forgot how big it can manage 1 file. ^. ^
  but it will be far from 8 GB.