Re: Tecra M2 - Vista cannot be installed - no disc hard not found

Similar Questions

• Tecra M9 - TPSMain.exe cannot start because CpePerf.dll was not found

  Hi and help,

  searched the Web and found other discussions of the forum with similar questions.
  Tried all suggestions, nothing worked. I'm not very good on the computer but you can find my way. In any case...

  After connection messge pop messages - up in succession, similar to: TPSMain.exe cannot start because CpePerf.dll was not found then: TPSoddctl.exe cannot start because CpuPerf.dll not found

  Computer works very well but Power Saver start is not automatic and can't select it from the Panel... "" Toshiba power saver does not work. "
  so select the power options... "could not start because the CpuPerf.dll is not running.
  Did all the research on the net and followed all the tips... i.e. unistall saving in safe mode, uninstall toshiba common utility can uninstall fatal error 0x7e

  Then download Ccleaner, inspections, uninstall with Ccleaner same fatal error.
  In support of Toshiba and tried to install Power Saver... same problem will not install.

  Thus help help help if possible.
  Computer works well but popping up messages are annoying and I'd love to sleep to extend battery.

  Tried the system restore, even though I doubt that it affects the files... Another problem "cannot complete system restore"... tried this several times and cannot restore the system either... What is happening?

  any help please
  Tim

  Hello

  I think you can solve this problem, recover the laptop.
  But that would mean that the whole HARD disk should be formatted and would be installed everything again, I put t know if this is an option for you

  It turns out that something will not with the Toshiba Power Saver installed and, consequently, the popup message.
  Usually new installation of GST should help. But it was not and I m wondering why

  Maybe this is s question really an OS since system restore help (to the previous state) didn t

  He s strange question right now I can suggest only a new recovery

• Error in action 3: file or Application: C:\ATSCallingCard\install\ATS Hot Keyexc: not found

  After I sign and enter my password I get this pop up

  Work was not completed

  Error in action 3: file or Application: C:\ATSCallingCard\install\ATS Hot Keyexc: not found

  How can I get rid of him? (I think it's in the middle of a scan)

  Thanks for any help.

  Original title: error Pop Up

  Hello

  As you say he appeared in one sweep and Google information points to him being associated with malware, it's probably a left over Malware boot entry that was removed from your security programs.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If the problem persists after scanning, take these startup entries:

  «How to use MSCONFIG in Windows 7»

  http://netsquirrel.com/Msconfig/msconfig_win7.html

  You can also use this free program to do, too:

  "Autoruns for Windows V11.32"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  See you soon.

• I am installing service pack 2 for windows vista home edition I get the error not found 0 x 80070490

  I try to install service pack 2 for windows home edition vista, I get the error not found 0 x 80070490 msicexec has an option to make extended logging, but spinstall/help shows all options.

  Split of: http://answers.microsoft.com/thread/82972695-1d12-4a07-9d72-0f9928a68dc1

  Hello

  Apologize for the delay in response. Please see the following article to resolve the issue of Service pack 2 installation:

  Error code 0 x 80070490 when you use Windows Update or Microsoft Update to install updates

  Note: Make sure you back up your data before you perform a repair of Windows installation.

  Hope this information helps. Back to us for assistance.

• machine is trying to perform a PXE boot after installing updates-"operating system not found error" when PXE boot

  Original title : Aucuns OS after installing updates save broken disk how to reinstall windows vista

  I installed the microsoft updates on my Vista laptop and now the system does not start. Error message is:

  Check the connection of the cable! PXE - MOF:
  exit Intel PXE ROM.

  Operating system not found
  Backup of disks were damaged
  starts from disc downloaded ubuntu, so no problem with a hard drive.
  Cannot access then unable to return to the last good configuration safe mode?
  where can I download vista to reinstall?

  Hello

  Contact your computer manufacturer and ask them to send a set of recovery disks Vista.

  They should do this for a small fee.

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  Read the responses in these links on the false boot order and network devices.

  http://www.techsupportforum.com/forums/F16/PXE-MOF-exiting-Intel-PXE-ROM-41235.html

  http://www.computerhope.com/issues/ch000706.htm

  See you soon.

• Windows could not install your (CEWL 1) not found driver software for your device

  After you download sony_tvupdate_2012_1158_ucf_auth

  A new folder will be created called sony_dtv026000066006_00000301

  Inserted UWA - BR100 and received the following:

  Windows needs to install driver software for your (CEWL 1)

  Locate and install driver software (recommended)

  C:\Windows\system32\new dev.exe

  Windows could not install your (CEWL 1)

  Check the support section for driver software

  Insertion of USB causes the following message: not found driver software for your device

  Hello
   
   
  I would suggest trying the following methods and check.
   
   
  Method 1:
  Tips for solving common driver problems.
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems    
   
   
  Method 2:
  Download the driver on the device manufacturer's website and install on your computer by keeping the computer in a clean boot.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7.
  http://support.Microsoft.com/kb/929135

  Note: Please, go to step 7 of the Kb to maintain the computer to a normal startup after you fix the problem.

   
   
  You can also refer to:
  Update a hardware driver that is not working properly. http://Windows.Microsoft.com/en-US/Windows-Vista/Update-a-Driver-for-Hardware-that-isn ' t-work properly

• Windows 7 SP1 will not install. Element is not found, the error not found (0 x 80070490) 490

  I'm running Windows 7 64.  I tried to use Windows Update and received this message: element not found, not found error (0 x 80070490).  Code 490 Windows Update encountered an unknown error.  I tried all of the troubleshooting, difficulty, burning the .iso (which worked great on my laptop running Win 7 32) and I tried a repair, nothing works.  Any ideas or should I just not worry about installing SP1?

  Steve

  All,

  If all the above steps give no results, the next logical step is to perform an InPlace upgrade.

  An upgrade on the spot is the final solution before you have to reinstall the operating system.

  Note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process.

  How to perform a repair installation of Windows Vista, Windows Server 2008, Windows 7 or Windows Server 2008 R2. Run a repair installation will restore the current installation of Windows to the version of the installation DVD. It also requires the installation of all the updates that are not included on the installation DVD.

  Note Run a repair installation will not damage files and applications that are currently installed on your computer.

  To perform a repair installation of Windows Vista, Windows Server 2008, Windows 7 or Windows Server 2008 R2, follow these steps:

  1. close all running applications.

  2. Insert the Windows Vista, Windows Server 2008, Windows 7 or Windows Server 2008 R2 DVD into the DVD drive of the computer.

  3. in the settings window, click install now.

  Note If Windows does not automatically detect the DVD, follow these steps:

  Click on start and type Drive: \setup.exe in the box to start the search.

  Note The placeholder drive is the drive letter of the computer's DVD.

  List programs, click Setup.exe.

  In the settings window, click install now.

  1. click on connect to get the latest updates for installation (recommended).

  2. type the CD key if you are prompted to do so.

  3. Select the operating system in the "Windows Installer" page you want to update or Inplace.

  4. click Yes to accept the Microsoft software license agreement.

  5. on the which type of installation you want? of the screen, click upgrade.

  6. when the installation is complete, restart your computer.

  Please see: How to perform an upgrade in Place on Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  See you soon

• COM3 is not installed. Driver is not found online.

  The Device Manager shows as COM3 is not installed. A driver is not found. It seems that prevent me from upgrading to Windows 10 of 8.1Pro. Please provide a solution.

  http://support.Lenovo.com/us/en/products/desktops-and-all-in-ones/ThinkCentre-m-Series-desktops/thin...

  the drivers are here

• Cannot start Realplayer because MSVCP90.dll not found.

  I can't install Realplayer SP because "the application failed to start because MSVCP90.dll not found. Reinstalling the application may fix this problem. I tried to re - install Realplayer, but the same problem occurs. Shortcuts to office etc. all appear but I can't open the message (above) appears.

  Hi Johnson Singh,

  MSVCP90.dll errors might indicate a problem of registry, a virus or malware problem, or even a hardware failure.

  Method 1: As a first step, start in safe mode and try to install the program and check if you can install the program successfully.

  In safe mode, scan your computer for infection of virus or malware with security software that you own.

  Method 2: Scan the checker (SFC) system files on your computer.

  SFC analyzes and verifies the versions of all protected system files after you restart your computer.

  Check out this link to do the same thing:

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

• While making a stop to a vista computer remotely, an error "the path not found network" takes place.

  I'm stopping distance this computer running Windows Vista Homp Premium from a Windows XP Professional computer. I ran shutdown.exe, but it says "the network path is not found." The network is working properly and I can't do a ping to this computer. I made sure that I ran the closure of an administrator account that has the same cridentials as an administrator on vista computer account (when I changed it, I got "access denied"). Quite simply, I know I have the privileges necessary to perform a remote shutdown.

  I found the solution. He has been to change the LocalAccountsTokenFilterPolicy by following the instructions here: http://support.microsoft.com/kb/942817

• vRA 6.2.3 new company creation group error - "cannot complete the requested operation: resource not found.»

  Hello

  I have tried to create a new group of companies in vRealize Automation 6.2.3 and received the following error:

  The requested operation cannot be completed: resource not found.

  I've attached a screenshot of the error.  All services on the device of vRA show such registered.

  I think that this is related to the duty reinstall my SQL IaaS database a few weeks back, but I'm not sure.

  Any help would be greatly appreciated,

  -Mark

  I finally got to the bottom of this.  It was because of the vRA IaaS server being unable to speak to the DTC resource on my SQL cluster due to these two components are in different domains.

  If you are interested, I have documented the solution here:

  http://virtualhobbit.com/2015/10/02/configuring-DTC-access-between-vrealize-automation-IAAS-and-Microsoft-SQL-Server/

  -Mark

• Kickstart install the iscsi disk not found

  I can't get my order of kickstart to install the iscsi disk.

  the line

  install - firstdisk = distance does not sutable found records

  I also tried

  Installer--disk=/vmfs/devices/disks/EUI.XXXXXXXXXXXXXXXXXXXXXXXXX

  install - disk = mpx.vmhba32:C0:T0:L0

  None of them sees the iscsi drive

  But if I run the Setup manually, I don't see the iscsi drive.

  any idea?

  I think that I understand it. In cisco ucs, I had to change my font of startup and add iscsi as secondary targets.

  the policy must be

  1 LAN

  2. the ISCSI targets

  The kickstart file can always use install - firstdisk

• Toshiba Nvidia drivers for Vista cannot be installed on the Satellite A100-912

  Installation display-psaa9-vista driver - 9754.zip ends with "no compatible hardware found message.
  My laptop has a GeForce Go 7600 (PCI\VEN_10DE & DEV_0398 & SUBSYS_FF101179 & REV_A1).

  Hello

  He s strange, one of my friends used this graphics driver of the page and 97.54 version worked.
  Guys, I recommend you test again. Download the driver again from the page and try to reinstall.

• install xp instead of vista and now the recovery discs are not supported

  Pavilion Media Center PC m8000

  1. installed XP on my laptop on the desktop that had need of Vista by mistake
  2. ordered the HP recovery discs and now they are not supported
  3. Build confirmed IDS
  4. How do I remove the XP completely?
  5. Or should I forget it and try to activate the XP?

  Sincerely,

  A ding dong in denver.

  Hello

  I suggest to perform a new Installation, or if you have a recovery disk, you can perform the recovery of the plant.

  For more information, see these links:

  Install Windows XP:

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/install-Windows-XP

  Installation and reinstallation of Windows Vista:

  http://Windows.Microsoft.com/en-us/Windows-Vista/installing-and-reinstalling-Windows-Vista

  I hope that helps!

• After Vista Ultimate Clean install battery Manager will not work Rundll32.exe error at startup

  I did a clean install of Windows XP SP3 Vista Ultimate SP 1. It was a total reload once installation is complete I used the insall system update all the drivers. Now Manager of battery will not work right, when I boot it hangs with an error rundll32.exe. I tried to uninstall and reinstall and allowed me at least open the program a bit, but there is no power management in the Manager. He says that I can create a new, but he does not appear once it is made. I can't counter is displayed in the taskbar and at this point I'm kind of at a loss.

  Any help would be great

  Thank you

  I have actully solved my problem. What I had to do was reboot the machine and after Vista installation was done I did the installation of battery first Manager and just downloaded from the section the T61 drivers (without using the update system) then once the battery Manager installation manual was full (it was then works well) I ran the system update to install the rest of the drivers and utilities Lenovo. If apperentally battery meter do not be installed via updater. My sugestion would be so to reload the machine once more and battery Manager install before running system update this is what worked for me.