Re: "unknown device" on Portege R500 after installing XP

Similar Questions

• Portege R600 - after installing XP 2 unknown devices

  I just finished installing Windows XP and everything seems perfect, except that I have 2 unknown devices and I don't know what they are.
  Also I can't find the driver for the fingerprint module.
  The application is present, but there is no driver, and it is not recognized.

  Can anyone help

  Hi ymkx,

  All the drivers and tools that you need can be downloaded here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Also this nice article should help you identify the devices:
  [How to identify an unknown device (e.g. LAN wireless module)? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=78]

  Additionally, make sure that Service Pack 3 is installed before starting with the installation of the driver.

• Portege R500 - after what ODD hardware upgrade will not read

  Recently, I bought a vintage 2008 Toshiba R500-11Z laptop ultraportable. He needed a new keyboard, because most of the keys are dead, so I bought a new replacement (exact same keyboard, an eBay seller). I also decided to give a new breath of life by installing a SSD drive. The old keyboard was attached to the frame with some sort of sticky back plastic, which is not reusable, so for the new keyboard, I used a strong adhesive tape double-sided. Before you screw the plastic rear landing gear I installed Windows 7, with the loosely adapted landing gear up. Installation of Windows is complete and everything seemed fine. After screwing in the landing gear, I discovered that optics player his original "open-top" mat * a DVD-RAM UJ - 844-S would not read disks. He just made a noise 3 times but does not spin then upward as it normally would. Drive is visible in Explorer solutions and Device Manager.

  After unscrewing the undercarriage, the relocation of the optical drive and rescrewing several times, I was not able to get the optical drive to play all discs. What I created is that the disc must be catching on the ceiling, thus signalling the reader to turns don't not upward; leaving the screws each side of the lander was allowed to create a gap, so there is more room between the optical drive and the ceiling of the laptop. Disks will then turn upward and Windows AutoPlay will open to them. What I can't work, it's what has changed in regard to the way in which the drive is mounted and its position relative to the ceiling above him. Or if the reader is now trying to turn a corner. There are two blocking screws that hold the drive in place, so that the reader must be at the same place its always been.

  I was wondering if anyone has come across this problem before, and if there is an easy solution. According to me, I hit a wall of bricks on this one!

  Thanks in advance.

  Just to say, after a lot of head scratching, I worked on the problem. I had made a mistake by attaching the clamp metal Assembly at the rear of the optical drive.

  I had screwed the clip outside the Orange connector when he had to be inside (between the optical drive and the orange connector). It seems that it must have pushed the player to place just enough to prevent it from functioning properly.

• Unknown device on X 300 after downgrading to XP Pro

  Device Manager indicates an unknown device, possible identifying information is the Device Id of Instance = ROOT\MS_PSCHEDMP\0000. After the downgrade to XP Pro, I have updated all the drivers and the software by using the system update, but the unknown device is still showing. I have not yet tested Wi - Fi, but I think that everything else works fine. Everyone get this problem?

  Problem solved (I think), after unknown peripheral uninstall and re-analysis of a new material, it no longer appears.

• HP officejet 6500 installed but a printing software unknown device... no driver installed?

  used cd to install printer hp 6500 office jet series. everything is supposed to be there. does not recognize the device. device manager unknown device States, no driver installed. using the usb connection. I tried 2 different cords and do not proceed with the connection. the drivers downloaded from the hp Web site and still no go. spent 45 minutes with hp today and I think I know more than them! Help, please. Windows xp (x 86) all updates are underway.

  Hello Sosocompliterate,

  Thank you for your message.  This computer connects to your printer via the USB port?  If Yes, are you able to use other USB devices on your computer?  You can try to change the output port the printer is connected to exclude a possible bad USB port on your computer.  Otherwise, if USB is detected on your computer and that you can't always not to recognize the printer, the result is most likely a bad cable or a defective printer.
  Please let us know.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Unknown device on Portege M100

  My Portege M100 has a unknown Devece appearing as * Texas Instruments OHCI Compliant IEEE 1394 Host Controller * anyone know where I can download a driver for this?

  Thank you

  Phil

  Hello Phil

  There is no driver for the firewire port. Just install Chipset utility and everything will be OK.
  Purchased used a M100 or you try to do the clean install of OS?

• New device failed, HD Audio after installing updates to Win 8.1

  Hello.

  I have installed recent updates from Toshiba, exactly:

  * 06/02/14 display nVidia Windows 8.1-64 Bit 9.18.13.2660 World Wide disk *.
  * 06/02/14 display driver Intel Windows 8.1 - 64 Bit 10.18.10.3308 World Wide *.
  * 06/05/14 gas station Toshiba Windows 8.1 - 64 Bit 2.6.8 world wide *.
  * 06/02/14 Toshiba Audio Enhancement Toshiba Windows 8.1 - 64 Bit 2.0.15.4 world wide *.
  * 06/02/14-key Toshiba utility function Toshiba Windows 8.1 - 64 Bit 1.1.0001.03 world *.

  and one of them has forced the creation of a new audio device, fails with 'STATUS_DEVICE_POWER_FAILURE '.

  I tried to remove it (and uninstall related drivers to) the device, but it reappears if I do the new hardware detection.

  What is?
  The drivers are Microsoft, 6.3.9600.16384

  Thank you very much
  Marco

  Hi Marco

  As I can see from another thread, you Satellite L50-A-1CU. According to the specifications of the laptop this laptop was offered with pre-installed 64 bit ML WIN8.1.
  Preinstalled OS contains all the necessary drivers, tools and utilities, so I want to ask you if there is a problem with the feature.

  Please don't get me wrong, but I use laptop 4 years but always with the original substance of preinstalled and everything works perfectly so I don't see the reason to change anything if the machine works well and pre-installed OS is stable.

  One last thing. Do not use the Microsoft drivers. Some of them are offered as optional Windows updates. Don change anything. Use the original Toshiba drivers only.

• Portege R500 - cannot install built-in XP Bluetooth drivers

  I recently installed XP and all is well (except for having them to change the hard drive in compatibility mode to fix SATA) except for one thing that makes me a wall: I can not install the Bluetooth stack. He comes to the point where he asked me to plug in the unit, but that's all.

  First, I downloaded the battery in the page of downloading my model (6.1), and then subsequently 6.4 of Toshiba Bluetooth support page - not working. I tried the Bluetooth monitor, which seems to do nothing except remove the external Bluetooth Toshiba program menu items.

  At the present time, there is a yellow antenna icon lit in the touchpad, LED display.
  By pressing FN + F8 seems to do nothing (also, the wifi works fine with Intel drivers).
  The BIOS has been recently updated to the latest version.

  Hello

  First are you sure that your portable computer with the module internal BT?
  You see a few BT labels at the bottom of the unit?

  If the laptop supports the internal BT module then installing BT stack should run without problem.
  After you run the exe file in BT stack folder/package, the installation should run through all the steps of the installation and rebooted again, you must activate the BT using the FN + F8 key combination.

  Using this button, you can switch between WiFi and BT. Choose BT you should be able to configure the BT

• Satellite U400-17R - audio device does not work after installing XP

  Hello

  I bought a model U400-17R with Vista Home. I formatted and installed Windows XP Professional download drivers XP Toshiba site.

  Everything works, but my Sound Device does not work. When I check in the Manager of devices the Sound Drivers are there and it says working properly.

  I'm lost... Can someone please help?

  Hello

  I think you have the same problem like me a few months ago.
  I installed Win XP SP2

  The t is not his work because I didn't install the patches MS; KB835221 & KB888111

  The patches must be installed as a first step, before the audio driver is installed.
  If you have already installed the audio driver, then you must remove (uninstall) before install you the patches Ms.

  PS: The MS patches are part of the SP3

• Directory to the/var/log/apache2 vRA device is not even after installing successfully

  VMware KB: Log locations for VMware vRealize Automation 7.x

  

  Installation of vRA succeeded him, but there is no ' / var/log/apache2 / * "vRA device." So I can't check if the apache is working properly. Everyone sees this directory?

  Apache is more used than the reverse proxy (we now use HAProxy), that the document should be updated.

  Thank you shouting it!

  Grant

• Unknown device ACPI\TOS1901 in XP Satellite A305-S6839

  Hello everyone.

  I have an unknown device ACPI\TOS1901 in Satellite A305-S6839.

  Any ideas to resolve this issue on windows XP?

  Thanks in advance.

  Hello

  I remember this question and he has already asked here in the forum.

  I searched a bit, found the thread forum for liaison with the doc of Toshiba.

  Check this box:
  [After the installation of Windows, an unknown device is visible in the Device Manager | http://support.toshiba-tro.de/kb0/TSB7501W20006R01.htm]

  The unknown device could be solved by installing a "Uitility password" or "Supervisor Password utility.

  Concerning

• M18x R2 Windows 8 "unknown device".

  Hello everyone, I have an Alienware M18x R2, which displays "Unknown device" in Device Manager.

  Here are the specs:

  I7 3920

  32GB 1600 Mhz RAM

  2 x GTX 680's

  2 x 1 TB drive HARD Western Digital 5400 RPM

  1 x 60 GB OCZ mSATA HDD

  380 Bluetooth

  WiFi killer

  Win 8 Pro 64-bit

  This particular "unknown device" does not appear with a Windows 7 operating system

  If I use Windows seven and install all recommended drivers, there is no problem, the "unknown device" in question is not yet with Windows 7 running, I did a clean Windows 7 and verified installation each device ID in Device Manager before installing anything else to see if I could find the one causing problems in Windows 8 - this is no where

  As soon as I install Windows 8 and check Device Manager, then this particular "unknown device" appears again, even after the installation of all the drivers in Windows 8 recommended is the only 'unknown' on the left.

  I tried searching the Internet using the hardware vendor ID and the device ID provided in the details section of the "unknown device" but could not find an entry useful, even using the databases of the seller and the material has been a waste of time

  Here is the hardware device ID exactly as it appears, three lines altogether, but I think the top one is relevant.

  ACPI\VEN_DELL & DEV_ABCE

  ACPI\DELLABCE

  * DELLABCE

  Any help would be great.

  See you soon

  Hi, this is certainly the driver for switching to airplane Mode. I finally could get mine put to update the other day. If you let Windows search the best pilot, it can automatically find now, he appears to have done on my machine.

• Sony Vaio SVE14112FXP. A few days ago the integrated webcam doesn't work. The strange thing is that it is not recognized by the administrator of the material, not even as an unknown device

  Hello

  I have a Sony Vaio SVE14112FXP. A few days ago the integrated webcam doesn't work. The strange thing is that it is not recognized by the administrator of the material, not even as an unknown device. I uninstalled and installed Arcsoft Webcam Suite, which has drivers, but nothing new.
  It seems that the built-in webcam is not connected.
  Thank you

  See Sony support site or their forum, this is a Sony webcam

  And no this isn't a feature of device, or something that should appear in the devices & Printers

• Two unknown devices in Device Manager.

  Original title: 2 unknown devices

  Hi I just bought a new laptop called Sony's Vaio T series, and that's my problem

  in the Device Manager it is two icons for unknown devices

  I download and installed most of the form Sony drivers but nothing resolved

  

  can someone help me?

  another photo

  the other device

  

  Thank you for your for your response

  I downloaded a program call driver pack solution

  and thank God he fix the 2 unknown devices and

  for the record, these devices are

  Device wireless Sony and the Sony firmware extension device

  I have download the drivers from Sony but nothing resolved

  but same driver package solution dryers remedy

  Sorry for my bad English, thank you and thank you for Abdul R

• Portege R500 - I've got two unknown devices after installing XP

  Hello

  I am looking drivers for the two unknown devices in the hardware Manager:

  alias
  "Intel(r) 82801GBM (ICH7-M/U) LPC Controller"
  and
  'System compatible ACPI Microsoft'

  Thank you
  Roger

  Hello

  Have you installed all the drivers Toshiba XP which appear on the European driver from Toshiba site?

  There is also a training installation document that gives the proper installation order. Please check if all the XP drivers were installed, as mentioned in this doc.

  In addition, you should check if you have installed the MS WinXP SP2 and Utility Intel chipset.

  Greetings