Similar Questions

• Agilent 34970 has programming issues

  I have a tester with 10 stations, I use LabVIEW 2010 on Windows 7 platform with an Agilent 34970 system of data acquisition with the followwing cards installed in slot 1, this is one complete 34908A 40 channel MUX in Slot 2 is a chain of 20 34903 Accuator. The part of the program data acquisition runs a scan of the 40 channels inserting values into a table and then crosses a series of shared variables to turn on or off the power supply of my reading VI stations.   I have problems with the power switch. The scan works fine, the power turn on but turn off the next run of the analysis. The scanner shows also the errors and LabVIEW errors

  Do you mean the byte count entry? He is very precise instruments, but in most cases, is not something that you have to worry too calculate exactly. You can put a number of arbitrarily large and VISA playback will end automatically when the device sent to the whole of the buffer. The 500 bytes, which is in the example could have been just a random number that the programmer has decided to use.

• Input buffer overflow Agilent 34970 has

  IM using Agilent 34970 A for a blood pressure purpose, Im getting error 521 and 103 when I select more than 15 channels.

  I understand that 521 error is an input buffer overflow error. IM using one of my own live measurements.

  I measured the 40 channels at once and I never had an error, but when I use the VI attached the error im.

  I reference some of the threads that deal with the same problem, I have not found a solution.

  Thank you

  Eureka

  Thanks for the reply... I thought about it... had to set the unit in XON/XOFF mode so that it retains the values of the power input channels. I did notice that I made the changes in the configuration, while I was doing someother changes...

  @margasan,

  The post that you directed me was one of my own messages... but thanks anyway...

  Thank you

  Eureka

• Agilent 34970 has with card 34903

  Hello

  We are able to close the first string on the map of 34903 switch but can't get other channels to close on this map.  We use labview 7.1, any suggestion is appreciated.

  Thank you

  Everett

  Hello and thanks for your quick responses.  I looked at my program of work colleagues and it was not defining the constant false to true to activate channels.  After that, the program works.

  Thanks again,

  Everett

• Can someone help me on action with agilent 34970-34901 has continious

  I need assistance with 34970-34910 has continious measurements. Everyone says that you need to configure "Agilent 34970 has advanced Scan.vi". I have modified this vi to measure temperature and pressure (current) but I could not go a sterp before measuring very. How can I do this? I have attached the vi that I modified.

  I solved the issue of measuring continuous with Agilent 34970-34901 has. All my error is in the configuration of the usb serial port. To the continuous measurement, the flow of control of the usb serial port configuration must be implemented as 'XON/OFF' and the same setting should be made in the vi. You could measure temperature/voltage/current at the same time by doing this.

• Trying to update channels in real time while controlling the Agilent 34970

  Hi all

  I got Aussie help on these forums and I hope that someone will be able to point me in the right direction with this problem. I'm still fairly new to LabVIEW please bear with me.

  I work with the LabVIEW driver for the Agilent 34970 connected on a GPIB-ENET 100/1000. The device was detected and works very well. The reason why I am writing today, what I'm trying to update the list channels in real-time. Currently I need to stop the whole process in order to modify the list of channels, but due to the nature of the tests we will occur, it is important that I can add more channels I want without interrupting the ongoing trials.

  I searched the forums and tried to change control of chain of channel for "Update of the value while typing" and "limit to the only line." The motivation behind the change of the latter was so that I could change the channel list and use the ENTER key to run. I also tried to create a while loop with shift registers but construction ws so clumsy that it does no more.

  I am sure that the change must take place as soon as the control of the chain, but is not certain since the pint is so he can reset which channels to scan and which appears lower in the VI. I have attached the VI I work with; It is a slightly modified version only Advanced Scan example of the driver.

  Thank you in advance,

  Yusif

  You might have added a registry to shift, but you're not actually compare anything. You compare the value of the control to the value of the data coming from the shift register to see if it has changed. If so, change the scan list.

  If you need to have a delay after you change the scan list, then you must add the delay within the business structure that calls the VI to reconfigure the scan list. You can use the late VI period causes the delay occur after you set up the analysis using the wires of the error to force the order of execution.

  P.S. Your naming scheme for screw means that you probably use a source code control system. If so, you would be well served by taking the time to discover the source control systems and installing a. It is very easy, and he has had several discussions in the LabVIEW forum on recommendations of source code control systems.

• I cannot download spotify, said "can't open the application because the PowerPC applications are no longer supported. What can I do?  I can't open spotify after it has been installed, said "could not open application because PowerPC applications are no l

  I cannot download spotify, said "can't open the application because the PowerPC applications are no longer supported. What can I do?

  I can't open spotify after it has been installed, said "can't open the application because the PowerPC applications are no longer supported. What can I do?

  Thank you!

  PowerPC applications have not been supported for many years now since, OS X 10.7.x, you need to look for an alternative to this app or contact the developers of Spotify to see if they have a version for El Capitan 10.11.x

• Each page is a zoomed out, and if I Zoom it, it is a normal size for a while, but when I close firefox and open it again, it has zoom out again, I have to zoom each page everytime I open a new page.

  Each page is a zoomed out, and if I Zoom it, it is a normal size for a while, but when I close firefox and open it again, it has zoom out again, I have to zoom each page everytime I open a new page.

  How to use Zoom?

  • https://support.Mozilla.com/en-us/KB/how-do-i-use-zoom

  The function Zoom of Page Firefox does a level of field by field to save favorite settings level users zoom, there is no default Page Zoom level setting in Firefox. Try these extensions:

  -> Default FullZoom Level 4.5

  • https://addons.Mozilla.org/en-us/Firefox/addon/6965

  -> NoSquint 2.1.2

  • https://addons.Mozilla.org/en-us/Firefox/addon/2592/

  Check and tell if its working.

• manage requests between acquisition and control program using agilent 34970 A

  Hello
  I realized an acquisition program of data with labview and agilent 34970, real-time acquisition works very well with a time you sample of a second... There is no problem
  to complete the program and control the taps installed in a photovoltaic system, pumping system
  I realized that a second program for the controlit is functional
  but the problem is when I merge the two programs in real-time
  This error is present at the execution of two programs at the same time, that is to say that they launch two request at the same time the instrument 34970 A
  (the poster of agilent 34970A labview crashes)

  -------------------------------------------------- --------------------------------------
  what I want is to find a little thing programming to manage two outgoing REQUESTS at the same time in LabVIEW instrument and create a kind of delay between two REQUESTS

  Sorry for the bad English

  Thank you

  If you are in the same executable, semaphores works well.  You lock the semaphore before making your order and demand.  Release after you get your data.  If the lock is already taken, then the semaphore just will wait until the lock is available.  Only one process can act both in this way.

• How can I open an email that has an attachment that ends in .DVI file?

  Original title: quick help
  How can I open an email that has an attachment that ends in .DVI file?

  Hello

  http://www.ehow.com/facts_5602439_file-extension-tex_.html

  http://www.FileInfo.com/extension/TeX

  use the 3 programs of third parties at your peril

• Push leads to SFDC when the contact opens an email but has not clicked

  Hello world

  I have to push leads to SFDC when the contact opens an email but has not clicked. I have a program generator that updates the CRM. How my canvas campaign looks like so I can push should conduit who opened an email but fact not clicked and dimension as 'Normal '? Should I create another program for this generator? Thank you!

  OK, looking at your detailed requirement, I think it's more that just to have two separate lists because you will also need to update contact record to see who has clicked and opened etc... (unless someone of other comments on this subject and provides a simple solution here).

  I suggest you explore approach to lead scoring. I think it would be much better option to have to go through sharing lists / route filters.

  Top scoring model, you can define the criteria of open clicks vs and give them scores... In the future, you can add additional criteria too for example if the person has submitted a form, visited a web page or a landing page of Elqoua etc. For each criterion, you can set specific scores... You can find information about the partitions of lead here... Eloqua10 drive rating Resource Center (there may be more available resources, so research topliners).

  It may take time for you if you are not familiar with the notation of lead but will future proof solution.

  If it helps at all then the way we manage click and opens with a form blind on the clicks... so whenever the user clicks on a link in the email they are passed through a form unknown / hidden and on the form, there is normally a specific value that identifies them as users click to get these users to SFDC straight on a daily basis.
  Then opens (excluding clicks) is learned separately and we normally and loaded separately (depending on budgets of telemarketing etc.). Having said that we are also developing implementing lead scoring model.

  I hope this helps.

  PS: on your question about food... Yes, it is basically adding members to a step... using the charger, you can automate the process. You can find create option charger at the top right in the program (as members).

• I have the first Pro 2015 but when I try to open a project that has been registered with the Premier Pro 2015 on another machine I get an error message that says that the project has been saved with the latest version.  Help!

  I have the first Pro 2015 but when I try to open a project that has been registered with the Premier Pro 2015 on another machine I get an error message that says that the project has been saved with the latest version.  Help!

  It seems that your version is not the latest.

  Check help / about... what version it reads.

  It should be 2015. (9.2.0 build 41)

  Otherwise, please update your version via app updates... or cloud in respect of aid.

• I can't deselect "Show 'Start' workspace when no documents are open" because this feature has been disabled.

  I can't deselect "Show 'Start' workspace when no documents are open" because this feature has been disabled. I can't make changes in this regard. Could someone help me with this problem?

  

  Work on the Trial Version of Photoshop CC?

  Because this option is disabled in the Trial Version.

• When my lightroom opens it says "Lightroom has encountered an error during playback of a previous cache and must stop." do not now what to do!

  When my lightroom opens it says "Lightroom has encountered an error during playback of a previous cache and must stop." do not now what to do!

  Help, please!

  Hello

  Please remove the preview Cache.

  To remove the preview cache, follow these steps:

  1. quit Lightroom.

  2. in your operating system, look for your Lightroom Catalog. Catalogs are generally/Pictures/Lightroom on Mac and my Pictures\Lightroom on Windows.

  3. Locate the folder whose name ends in "Previews.lrdata" and delete it.

  Assani

• When I try to open LR, I get the following message, the lightroom catalog file named "lightroom catalog 5, cannot open another application already has its opening." I can't find no other open programs and have tried several times to restart and power d

  When I try to open LR, I get the following message, the lightroom catalog file named "lightroom catalog 5, cannot open another application already has its opening." I can find no other open programs and have tried several times to reboot and turn off without success, any thoughts where I should look?

  Cannot open catalog in Lightroom