Re: Volume control is only

Similar Questions

• The volume control works only when configuring integration HotKey is on...

  I'm not VERY good at the computer...

  But, my volume keys worked very well until I had to reboot my computer. After that, it stopped working. I tried to install integration HotKey. The sound would work when the screen is in place. When you exit the installation screen of and that I restart my computer, it doesn't work anymore. I also tried updating my audio drivers, but it does not help.

  What should I do?

  I have fixed this problem myself! I've updated several times and got through. Thank you!

• My speakers on my Dell Latitude D820 suddenly emit only a low sound. I adjusted all the volume controls in the menu sounds from the Control Panel, and there is no change in volume.

  Low sound volume

  My speakers on my Dell Latitude D820 suddenly emit only a low sound. I adjusted all the volume controls in the menu sounds from the Control Panel, and there is no change in volume. It's real power radio on the internet and play music from a CD inserted into my machine. The sound icon does not appear in the toolbar.  I tried the fixit of automatic Wndows and it ran and said low volume has been set. Not the case.

  Hello

  1. what operating system do you use?

  2 did you change on your computer?

  Method 1:

  I suggest you follow the link and check.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows?T1=tab02

  Method 2:

  I suggest to follow the link and search for the volume in the taskbar.

  (a) right click on an empty area of the taskbar and then click Properties.

  (b) in the Notification area, click Customize.

  (c) select the volume see the icons and taskbar notifications check box, and then click OK.

  I also suggest you to follow the link and check.

  Change icons appear in the notification area

  http://Windows.Microsoft.com/en-us/Windows7/change-how-icons-appear-in-the-notification-area

• Sound only works if I constantly change the volume control.

  Hello

  The sound on this Dell Inspiron One 19 t works only if I jiggle the volume control constantly.  The drivers are up to date and the only thing I can add is that this problem started when I reinstalled Windows 7 after a BSOD.  I tried to use Puppy Linux using a live CD, and even who could understand the question sound, even if it has detected the sound architecture right and everything is configured.  Just always had this problem.  So now I'm using Windows 7 and have installed all the updates and still I can't hear sound if I move the slider volume up and down.  It is therefore completely useless without good audio playback.

  I searched and searched on the internet and it doesn't seem to be a very common problem, and nobody is mentioning the same problem with the conexant smartaudio driver windows 7.  In any case... I'm a little sick of these computer things now... just full of bugs provided by companies billions of dollar, which tends to support you unless you pay them $ more.

  Please do not answer in an audio format or I won't be able to hear it :)

  The currently installed driver may be reported as the latest version, but he could have become corrupt and therefore not working properly.

  So, even if the driver is updated, you might find that download and install the driver from the Dell support site will fix the problem.

• IOS App Remote - Volume control issues

  OK, so I downloaded the app recently released for Apple TV IOS. Everything works as expected, except the inconsistent Volume control.

  I have two Vizio TVs in my house - E701i-A3 and models M401i-A3. The volume via IOS app works perfectly on my E701i-A3 - pressing iPhone volume buttons triggers change in volume on the soundbar attached to this set.

  No luck with my M401i-A3 not set - by pressing the volume iPhone buttons does cause changes in local ringtone volume iPhone... that tells me something is not right with audio control EAC between ATV4 and the TV set. I do not use soundbar with this set - internal speakers only.

  Both sets are running the latest firmware of Vizio and CEC/audio is enabled. No problem to control the volume or turn the sets/turn off via the remote Siri material.

  Kind of ideas here... anyone have any ideas as to what the problem may be with my Vizio M401i-A3 defined? Someone at - it got IOS volume remote control works with other models of TV?

  Volume control requires HDM - CEC to ensure compatibility. It is quite possible that only one of your TV is compatible.

• the volume control on background music

  I finished my first iMovie composed of video clips.  I have two questions:

  How to lower the volume of the background music for a few seconds only

  How to disappear the music of a song before the end of the song.

  Thank you

  Hi, grosen25,

  There are two ways to adjust the volume in the latest version of iMovie (10.1.2).

  One way is to select the audio clip, and then click on the speaker icon in the toolbar at the top of your screen.   This will reveal a scroll bar

  allows you to adjust the volume from 0 to 400%.

  Another way is to first click on the settings button in the right middle of your screen and select 'Show waveforms' in the dialog box that results.  Then select the audio clip.  You will see a horizontal volume control line that runs through the clip.  Place your cursor on the line and move it up or down to increase or decrease the volume.

• HTML5 audio player has no volume control

  G ' Day,.

  The HTML5 audio player not support since apparently version 11 volume control. We are now at version 26. Is there a plan to restore a volume control

  Here is a variation on the script. Two major differences. First, it inserts a little bubble with a character and only shows the cursor when you hover over that. Second, it is designed to add the controls next to any audio < > without any customization, so there is a chance that it will work on your PBX page, assuming it is the space for the cursor.

  var players=document.getElementsByTagName("audio"); for (var i=0; i<players.length; i++){var slider=document.createElement("input"); slider.setAttribute("type", "range"); slider.setAttribute("min", "0"); slider.setAttribute("max", "100"); slider.setAttribute("step", "10"); slider.setAttribute("value", players[i].volume*100); slider.setAttribute("style", "width:100px;height:2em;display:none"); slider.setAttribute("oninput", "this.parentNode.previousSibling.volume=this.value/100"); var sNew=document.createElement("span"); sNew.innerHTML='<span style="color:#fff;font-weight:bold;vertical-align:top">&nbsp;&Delta;&nbsp;</span>'; sNew.appendChild(slider); sNew.setAttribute("style","padding-top:1em;margin-left:6px;background-color:#aaa;border-radius:8px"); if(players[i].nextSibling) players[i].parentNode.insertBefore(sNew, players[i].nextSibling); else players[i].parentNode.appendChild(sNew); sNew.setAttribute("onmouseover", "this.children[0].style.display='none'; this.children[1].style.display='inline'"); sNew.setAttribute("onmouseout", "this.children[0].style.display='inline'; this.children[1].style.display='none'; this.children[0].blur(); this.children[1].blur(); this.blur()");}
  

  Does it work?

• Issue of volume control after downgrading A210-1AS for Win XP

  Hey all,.

  I recently upgraded my satellite A210-1AS to xp and after sorting more things, including the audio drivers, wireless, etc, I have some problems (surprise, surprise)

  1. the sound adjustment on the front wheel can't control the volume, although it worked fine in Vista.
  DD realtek audio Manager is installed fine, AFAIK. Any ideas how to solve this problem?

  2. the buttons on top to control the media work more (toshiba easykeys?).
  Are there drivers for these that everyone found for XP?

  3. (and I'm not too fussed on) there are 3 yellow exclamation marks in Device Manager.
  1. I believe is the modem, which I am not at all worried, the other 2 I do not know. Any ideas?

  Thank you very much for the replies, would be nice to sort. Although I could use volume control in xp, it is not ideal, as I'm sure you can imagine.

  Will check in the morning, thanks again

  Hi Joshua

  I m the owner of the Satellite A210. This laptop is similar to the Equium A210.
  I installed a Windows Vista and XP on the second partition and I have the sound and the sound volume control works very well with both operating systems.

  But I had a little problem with the installation of driver sound. After a short investigation here in the forum, I discovered that I need to first install MS patches; KB888111 and KB835221.
  After installing the patch, I installed the Realtek audio driver. It worked like a charm.

  (2) control buttons doesn't work on my laptop because I have an A210 with the AMD processor and chipset and XP from Toshiba Utilities for my series are not available.

  (3) I have 2 yellow exclamation marks in my device manager. The modem works because I installed the modem driver from an another series of notebook A210. The driver also works.
  Two other unknown devices ("possibly PCI memory controller" or "Mass Storage Controller) may be linked to the material that is only supported by Windows Vista and not XP. Therefore, the XP drivers don t exist also.

  Good bye

• Tecra M1 high slope Screech of volume control

  Hello:

  For a little while that now there was a sharp cry when the volume was turned up. He started at the upper end of the volume and systematically, it started when you only carefully increase the volume. Now the volume control should stay off.

  There is no interference when connected and it also happens when the computer is in stand-alone mode when they travel.

  Tecra M1 is now 18 months old and, also, the modem does not work with any sound by modem and the Port remains closed. It is now, when you are far away DSL, using a portable modem if wifi is not available.

  TIA.

  Martin

  [Edited by: admin]

  Hello

  In my opinion, you must change the speaker volume in the properties of the Modem software. As far as I know the settings should be set to the second stage.
  You can find it in: Device Manager-> Modem-> Modem Properties
  Second if you want to use the Modem must be disabled the option wait for the dial tone before dialing.

  Best regards

• Message ' ' Can t Access Volume Control "at startup

  When I start my computer I get an information "warning cannot access volume! And I can click OK only.

  The Volume control does not work. I thing that problems start when I updated Windows XP Home Edition.

  Hi Luczek (you are the Poland)?

  Maybe this thread will help you a bit:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=18952

• By Satellite L300-147-manual volume control does not

  The manual on the laptop volume control no longer works. If I try to adjust the volume (on the right of the headphone plug-ins) - I just keep scrolling. So, I can only watch DVDs on a really low level. I adjusted the volume under 'control panel' control to the maximum level.

  Any ideas to fix this please?

  Never heard talk about it but it makes sense with the installation of the Package of added value.

  It's really strange question, and it will be interesting to know if this helped. Please post the results.

• Volume controls on the keyboard after the upgrade to Windows 8

  I have a Touchsmart 520-1070 with the mouse and keyboard without wire factory.  After the upgrade to WIndows 8, the volume controls no longer work.  I tried the Recovery Manager to reinstall the keyboard drivers, but there is no driver keyboard under hardware drivers.

  In the following device manager are listed under keyboards:

  HID keyboard device

  Keyboard 109 MCIR Microsoft eHome

  Keyboard MCIR Microsoft eHome

  Microsoft eHome key remove control Keayboard

  PS/2 standard keyboard

  Any report that they are installed and are working correctly and that the drivers are up to date.

  Has anyone else seen or solved this problem with a Touchsmart computer?

  The instructions below were provided by HP support.  This has restored the function on the keyboard volume controls.  The referenced below drivers are drivers IDT high definition Audio Device.  I am not sure that it was necessary to reinstall the audio drivers.  It can only had to remove the USB dongle and back to restore the functionality of the button.  Note: the USB dongle is located behind the VESA Panel to the back of the PC.  No tools are required and the dongle can be removed and replaced without shutting down the PC.  VESA panel removal requires a bit of a steady hand, pulling the lip which is close to the connections on the rear panel.

  Instructions received from HP:

  Please go to the following link and check the "return of the system", article #7 is the USB dongle:

  http://support.HP.com/us-en/document/c03026390

  After you have reinstalled the receiver, please download and install the following driver:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=CP-110499-1&CC=US&DLC=en&LC=en&os=4132&Product=5157120&sw_lang=

  Then install the following update:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=CP-112060-1&CC=US&DLC=en&LC=en&os=4132&Product=5157120&sw_lang=

• Volume control dissappeared from a bar at the bottom right, bring it up again?

  the icon for the volume control used to be next to the battery and wireless internet icons in the lower right corner... a day he dissappeared and can't get it back... the choice of volume on the taskbar is faded and cannot be marked check...? any ideas how to restore...

  the icon for the volume control used to be next to the battery and wireless internet icons in the lower right corner... a day he dissappeared and can't get it back... the choice of volume on the taskbar is faded and cannot be marked check...? any ideas how to restore...

  This is not the forum for computer issues.
  This forum is for feedback only.

  Always start by specifying what operating system you are using... XP, Vista or Win 7.

  For Vista, use this tutorial:
  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

  Go to the three method

  2. for the Volume icon.

  For Win 7, use this tutorial:

  http://www.SevenForums.com/tutorials/19085-system-icons-enable-disable.html
  Go to the second Option

  9. to activate the Volume icon

  For Windows XP, repost to XP forums:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp?tab=unanswered

• Volume control touchpad does not work!

  I have a HP Pavilion dv6-1355dx notebook and the touchpad where my volume control / mute and wi - fi on / off toggle does not work anymore.  He has only started to happen after I did a Windows Update a few days ago.  Y at - it an update of the driver or something I need to do to fix it, or I'm just unlucky?

  Any help would be appreciated!  Thank you!

  Hello

  Try the following.  Stop the laptop, unplug the AC adapter unplugged, remove the battery and then press and hold the power button for a minute.  Plug the power adapter (leave the battery) and start Notepad - see if the touch buttons now respond.

  Kind regards

  DP - K

• "Windows cannot display the control volume on the taskbar because the Volume control program has not been installed. To install it use Add/Remove programs in Control Panel. »

  missing volume control

  volume control was gone. I tried to go into my control panel to use it, but I get an error that says:

  "Windows cannot display the control volume on the taskbar because the Volume control program has not been installed. To install it use Add/Remove programs in Control Panel. »

  I have lost my Windows XP disc in a move and can't reinstall the file to a disk, how to fix this?

  When you use certain features sounds and Audio devices, you see a message like this:

  Windows cannot display the control of volume on the taskbar because the Volume control program has not been installed. To install it use Add/Remove programs in Control Panel.

  It seems that the c:\windows\system32\sndvol32.exe file is missing.

  This may occur if your antivirus/antimalware application thinks the file is suspicious and quarantines (effectively delete) the file.  You can replace the missing file with a backup copy of the file that is in another folder on your system.

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  Assuming that Windows is installed on your C drive...

  We know that XP keeps copies of critical system files in the following folder:

  c:\Windows\System32\dllcache

  Using the Explorer, search for or navigate to the following folder:

  c:\Windows\System32\dllcache

  Locate the sndvol32.exe file, right-click, choose copy (it copies the file to the Windows Clipboard).

  If your Solution Explorer settings are not set to display file extensions, you will see only a file called 'sndvol32' which has an icon that looks like to the volume control slider (this is the file you need).

  If the file is missing in the dllcache folder, look for a copy of the file in this folder:

  c:\windows\ServicePackFiles\i386

  Browsing from a level in the following folder:

  c:\Windows\System32

  Right-click on an empty area in the window of c:\windows\system32 and choose Paste to paste in the missing file where it belongs.

  Answered in the affirmative if invited to replace the existing file.

  Now try your features sounds and Audio devices.

  Note that run sfc/scannow will not replace the missing file because it is not this that sfc/scannow does.