read a bmp to computer file

Similar Questions

• How to convert. Files of SMEs to be able to read them on the computer?

  How to convert. Files of SMEs to be able to read them on the computer?

  Find the program that creates the file and use it to open them.  If you are not sure, ask the person or the source you got the files from.

• Is there a way to copy the drivers and setup of the drive from the computer and transfer them to the reader of the dead computer?

  Separated from this thread.

  Is there a way to copy the drivers and setup of the drive from the computer and transfer them to the reader of the dead computer?

  Hello

  You cannot copy the drivers installed anyway.

  Saving your files:

  You can remove the hard drive and put it in a hard drive USB enclosure > plug it into another computer > and try to read and copy your data in this way.

  See you soon.

• read an AVI using "Binary file reading" vi

  My question is to know how to read an avi file using vi «The binary read»

  My goal is to create a series of small avi files using IMAQ AVI write framework with the mpeg-4 codec to long 2 seconds (up to 40 images in each file with 20 frames per second) and then send them one by one in order to create a video stream. The image has entered USB camera. If I read these frameworks using IMAQ AVI read framework then compression advantage would be lost if I want to read the entire file itself.

  I've read the avi file using "Binary file reading" with 8 bit unsigned data format and then sent to the remote end and save it and then post it, but it did not work. Later, I found that if I read an image using "Binary file reading" file with 8 bit unsigned data format and save it to local computer itself, the format should be changed and it would be unrecognizable. I'm doing wrong by reading the file format of number integer 8 bit unsined or should I have used other types of data.

  I'm using Labview 8.5 and Labview vision development module and module vision 8.5 acquisition

  Your help would be very appreciated.

  Thank you.

  Hello

  Discover the help (complete) message to "write in binary.

  "Precede the size of array or string" entry by default true, so in your example the data written to the file will be added at the beginning information on the size of the table and your output file will be (four bytes) longer than your input file. Wire a constant False "to precede the array or string of size" to avoid this problem.

  Rod.

• Windows Vista Step By Step-reading error in downloading the files.

  Windows Vista Step By Step-reading error in download of files do I need to talk to or call? by following the instructions in the book - I get the error in the charge process down. I buoght the book with the CD to learn and I can not even begin to learn!

  Hello Enrico Cassin,.

  There is a section of the book which should be able to help with the CD that came with the book. If you look at the Table of contents, there is a section called using the CD of the book. See the section to see if they can help you.

  What kind of error do you get when you download the file?
  Did you choose to save the files on your computer, or you chose run?

  You can also contact MSPress for a replacement CD if the CD is damaged.
  Contact telephone Microsoft Press customer service: (800) MSPRESS or (800) 677-7377

  Please give more details as to what is happening and we will try to help.

  Sincerely.

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I can't turn my photos because I can't disable the 'read only' attribute of my files.

  Whenever I go into the Properties uncheck the read-only attribute of my files, it won't let me, but he will return back as soon as I click on ' OK. "

  I tried to change the property, as well as the opening of full control.

  I'm already administrator.

  It happens even when I create new folders on my desktop. It it automatically read-only, and I am able to uncheck with him coming back after I click OK without worrying.

  Help, please.

  The photos are from my phone. Open them in the image viewer and I'm just turning them using that, or good right click to rotate.

  This also happens with the new cases, I create and save all the images that I have on my computer.

  The images themselves are not read-only. The folder attribute is the problem.

  Again, there is no attribute of read-only files.

  If you use an iPhone, the photos can contain metadata that preventing rotation.

  See this thread.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/cant-rotate-some-photos-in-Windows-7-but-can/3a809845-9144-4BB1-9bb3-ab4f5b856524

• I have Adobe Acrobat Reader DC on my computer.  I have NEVER had bad to open a document from this location before.  All of a sudden, I wonder a password.  I went in and created a password, but it won't work when I try to open only th

  I have Adobe Acrobat Reader DC on my computer.  I have NEVER had trouble opening a document from this location before.  All of a sudden, I wonder a PASSWORD.  I went and created a password, but it does NOT work when I try to open certain documents only three 3 in Player-all OTHER documents are open without asking for a password.   I tried to reset the password and tried again to open these particular documents.  They are still not open!

  Then I "chatted" with ADOBE and they me logged onto the Forum and told me to look for an answer I was ANable to automatically find...

  What is everyone out there knows what I need to do to obtain a PASSWORD THAT WILL WORK when I try to open these 3 documents?

  ALSO, what is the URL of the FORUM ADOBE?

  Thank you VERY MUCH to anyone who can help me.  I have urgently NEED to see these documents today, 18/05/15.  Thanks again!

  This isn't true at all. In fact, the specific problem of this user has been resolved when they discovered that someone has added a password security policy to their files. See: How to get and use a password that works to open several documents in Adobe Acrobat Reader DC?

  If you add the password to your files yourself and then forgotten, then there is nothing that can be done using Adobe software, however.

  This can be done with Adobe Reader but is not able to apply (or remove) a security strategy for PDF files.

• Can I get a CD with the latest version of Adobe Reader for Windows XP with Service Pack 3 System. I don't want to go online with this system. I have dedicated to read all of my PDF files only.

  I have 4 computers, including 2 run on Windows XP with Service Pack 3. I have spent these systems to the task to read all of my PDF files which I've collected from my recent academic career. I want to use the desktop system is an old Dell Optiplex GX240 with Acrobat Reader 4.0. The other Windows XP System I have is an old HP laptop with Adobe Reader 8.1.4 installed. I want to update both systems to the latest version which is available for Windows XP w/SP3 installed. Then, because I don't want these online system, it would be possible for me to get a copy of the Adobe Reader software I need on a CD-ROM? -DeWitt Ken, a veteran of the 68-year-Young Viet Nam and recent College graduate... Summa Cum Laude.

  You can use a computer online to download the full Setup offline reader

  http://get.Adobe.com/reader/Enterprise/

• Unable to open Adobe Reader XI or any PDF file

  When I try to open Adobe Reader XI or any PDF file, it is said that he "cannot open protected mode due to incompatibility with your system configuration. Want to open Adobe Reader with protected Mode off? "When I choose open with Safe Mode disabled, it shows then"Acrobat failed to load its core DLL. "Help, please. Thank you. All PDF files and adobe reader to work on my computer. Thank you.  When I try to solve the problem, "incompatible application" is listed under the troubleshooting report.

  Several similar topics in this forum indicate that this error can be caused by a rootkit infection.

  Google for "search for rootkits" and check if your system has such an infection.  Please report back.

• Read/write to DB text file

  Hello
  
  What is the effective way of reading the text file and write to the DB table.
  
  Forms Builder (10.2.0.3.0) - version
  DB 10 g 2
  
  
  Rgds
  
  
  sexy

  Hello

  TEXT_IO is a software package, integrated forms. Webutil has too (but it's CLIENT_TEXT_IO, which can be read from the client computer), in which, plain TEXT_IO reads the file from the server computer.

  As I said before, it depends on the number of records / size of the file. If he records little (say a few hundred), then you can go for TEXT_IO. However, if the size of the file is very high / you have more records (say thousands / millions), then SQL Loader is the best bet.

  If you are worried about the performance (i.e. If you have more records to be inserted), you can create a batch script (which loads the data into tables using SQL Loader) and call the command script using the HOST of shapes command.

  You can see the SQL Loader manual (which I gave the link before), for orders / check the syntax of the file etc and create a command script. Probably, if you're looking for the PL/SQL forum / forum SQL Loader, you will get more ideas and samples.

  HTH.

  Arun-

• Lines of Officejet J6400 graphic in the Excel sheet misaligned when computer file copying

  OfficeJet J6400 all-in-one, Vista, connected by cable to the laptop computer (and also connected wireless. I did both because of another problem fax not working do not under wireless only).

  The copy was working fine. Now, sheets of Excel spreadsheet and graph lines and many a printed text appear slightly crooked and misaligned.  The lines look like test you made during the alignment of the new ink cartridges. (some segments of line up, some down).

  AND, this only happens when copying of computer file for printer.  If I run a printer manually through Excel/graphic paper, it prints very well.

  Appreciate any ideas on that.

  Thank you.

  Both BAD and sorry.  It seems that the right printer ran out of black ink now. What explains that.

  But the ink looked bleak but was printing it for about a week. It is a long warning.

  I'm sorry to bother you.

• How to read/write tdms 2.0 files with the TDM C DLL?

  Hello

  How to read/write tdms 2.0 files with the TDM C DLL?

  How consequently the datas in interlaced with the TDM C DLL mode?

  Thank you

  Confirmation: TDM C DLL always wrote the file in TDMS version 2.0.

• Photosmart c7180 cannot scan any computer file except C:\Users...etc... \Scans.

  New desktop computer. New OS than Windows 7, 64 bit. Office Enterprise 2007. Software loaded new Photosmart c7100 CD purchased from HP as directed.

  Photosmart c7180 cannot scan any computer file except C:\Users...etc... \Scans. I want to scan to E:\

  Nothing wrong with the scanned image. No error message.

  Found. Settings, scan settings, scan to... Configuration, settings button, buttons search for the solution Center, manage shortcuts scan... and then create new shortcuts in the folder of your choice!
  How bypassed can you get?

• How to read the VI Analyzer config file?

  Hello

  How to read the analuzer vi configuration file? I'm getting a lot of errors on the size of the front panel and I don't know what should be the size you want. Where is the maximum expected size of the specified front panel?

  Kaspar says:

  Hello

  How to read the analuzer vi configuration file? I'm getting a lot of errors on the size of the front panel and I don't know what should be the size you want. Where is the maximum expected size of the specified front panel?

  If you have VI Analyzer installed, you can load the configuration file and look at the section select the Tests. There is a test for the maximum size of front under front-> User Interface. The default value is the resolution of the current monitor of the PC (including multiple monitors). You can change to the desired option.

• Paths of reading via the Config Ini file

  I was curious to know how one send or read from a configuration (.ini) file paths in LabVIEW. Any help is appreciated especially examples

  It's actually pretty simple...