Reading comics on SmartMedia

Similar Questions

• Satellite P750 - no reading comics after upgrade to win 8

  Hello

  I did an upgrade to Windows 8 and just ran the upgrade Assistant Toshiba on my P750 Satellite. Everything went well, but now I noticed, that the WinDVD BD software is no longer installed and the Toshiba Video Player is not able to read Blu-Ray-videos.

  My question is: is it possible to watch Blu-ray-discs on my laptop without spending any money for the third-party-software (Win DVD etc) as I did on Win 7 before the upgrade?

  Thank you

  Thomas

  Hello

  As far as I know you would get this software from Toshiba
  But we must call the call centre in your country.

  Some people here in the forum reported that they got missing tools for call center agents.

  However, you can also use a freeware tool like VLC player the player is able to play BD discs.

• Qosmio X 500 - 10z - acoustic bass watch Blu - ray disc

  Hello

  for all those who can help me
  I bourght this computer very well and I was told it's of amazing sound.
  now I reinstall windows 7 and all drivers - now when I play a blu - ray disc the sound player is very very low. This maybe on that expensive computer of Pentecost harman/kardon spekers? or something wrong. the sound is fully active
  100%. I use windvd to read comics.

  best regards wery

  Hoffer

  Hello

  I don't think it's a real problem.

  The laptop supports the Harman Kardon speakers so they are really good speakers.

  In addition, you can check the Panel of-> sound-> the Read tab
  Choose here the speakers and click Properties.
  If the level is set to max and then sound loudness is already at full level
  In addition, you can check the volume of the player.
  But that's all you can do,

• After you download CyberLink PowerDVD 12, am unable to read the comics

  Since the download, CyberlinkPower DVD 12, am unable to read the comics if it starts with a trailer or advertising.  When it comes to the "Play" button, nothing happens.  Someone, please help that Cyberlink will not say as to what is happening.  Thank you.

  Hello

  As much as we want to help you with this, I fear that this issue is not part of our scope of support. I recommend you contact CyberLink support, as they are one who takes over this issue properly and in the best position to address this problem.

  Thank you for your understanding in this matter.

  Thank you!

• How to sign documents with the reader with a comic signature?

  Hello

  The company that I work wants to go paperless and we are deploying iPads with Expert PDF that synchronize with our FTP server. It works very well, and when we sign in using PDF Expert on the iPad we can actually sign with a pen and make it look like a paper signature.

  We are also keen to deploy portable computers able to reach for some of our field technicians, because they must use Xactimate while on a construction site. Rather than give them a phone fantasy (looking at the Tablet, Lenovo ThinkPad X 230) and one iPad, I rather just use the laptop in the same way that we would use iPads to sign the documents.

  The problem with that is that I can't get Acrobat or Reader to allow me to draw a signature in a signature field. Is this possible? One or the other when I go to the Signature of the place and the window shows that I have that the certificate option, other options are all greyed out...

  How can I achieve what I'm looking for? Is there a particular setting or the way to save the PDF file (out of scope) to allow the signature fields to shoot?

  Thanks in advance for your suggestions.

  OK, so I thought about it and I have to say, Adobe went back on it. In Reader 10, you can simply go to the extended tab, select apply ink Signature, select the box and you're done. 11 reader do you by going to the tab of the Panel, select the place of Signature, and then select draw my signature. BUT, for that to work really, signature fields in the form must be removed from the PDF or the only option you get is to use a certificate. Good job Adobe, to complicate a simple task.

• Satellite Pro L770-144: 8 card reader win don't recogize SD card

  My computer laptop ist a Satellite Pro L770-144 and the ist IO 8 Pro 64-bit Windows.
  The SD Card Reader recognize the cards. I had installed the controller with the 6.1.7600.30126 Version Realtek card reader a Windows 8.
  But the cards are not recognized.
  In Windows 7 it? works.

  Does anyone have an idea?
  Greetings and thanks
  Leo L.

  Hello

  First question:
  Card reader is properly recognized in Device Manager?
  If it is not recognized, then you used a bad driver.

  If its recognized, the driver has been installed correctly and there is another reason why SD cards cannot be used.

  As far as I know the Satellite Pro L770 card reader manages different types of cards with different sizes.
  SD: 8 MB - 2 GB
  SDHC: 4GB - 32 GB
  SDXC: 64 GB
  Memory stick: 128MB - 256 MB
  Memory Stick Pro: 512 MB - 2 GB
  xD Card: No.
  Mini SD: 8MB - 2 GB
  Micro SD: 8MB - 2 GB
  CompactFlash: No.
  SmartMedia: No.

  As you can see the compatible SD card: 8 MB 2 GB
  It seems more large SD cards only are NOT supported.

• Satellite M40X won't read XD Picture card type M

  My Satellite M40x cannot read a XD Picture Card type M, but he can read a simple XD (not type M). Do I need a driver and where do I find?

  Hello

  Satellite M40x can only handle this memory cards/media:
  SmartMedia card
  Capacity 8/16/32/64/128/256/512 MB

  MemoryStick
  Capacity 4/8/16/32/64/128 MB

  MemoryStickPro
  Capacity of 256/512/1024 MB

  SD card
  Capacity 8/16/32/64/128/256/512 MB

  MMC
  Capacity 8/16/32/64/128/256 MB

  Card XD-picture card
  Capacity 4/8/16/32/64/128/256/512 MB

• The card reader memory 15 one in the e9250t Elite does support the SDXC memory card

  The card reader memory 15-one in the Desktop Elite e9250t does support the SDXC memory card?

  What memory SDHC card?

  That is a good question. Is there a part number on the memory card reader?

  Theuser guide provides the following information only.

  Make sure that the memory card is one of the types supported:
  CompactFlash (I, II, and Microdrive), Memory Stick, Memory
  Stick Pro, MultiMedia, Secure Digital, SmartMedia, or xD.
  Some models may support additional types, such as the SDHC
  (Secure Digital high capacity) memory cards

• Clear.fi reading Blu - ray?

  I thought Clear.fi would play bllu-ray discs but mine own can't.  Clear.fi can see the disk of the comic and the title, but he won't play.  I tried to update, but it says that no update is available.  My office not came originally with the BD but I added it later, and the drive works fine with other applications.  Clear.fi is supposed to play blu - ray?  because my computer came originally with BD, do I have a limited version?  Thank you

  I got mine to work again. Hope this helps:

  (Your computer must be packaged with Clear.fi media)

  You can get the Clear.fi media with the beam of AcerCloud here

  1. Uninstall Clear.fi media
  2. Launch Acer eRecovery Management
  3. Find the menu for the recovery of the drivers and programs
  4. Scroll down and find the Clear.fi media! Click to reinstall it.
  5. To connect to the internet
  6. Start clear.fi Media and then insert your Bluray movie
  7. When you are prompted, click Yes to update the aacs key
  8. Fixed

  One night, asked me to update the key but I wasn't online, so I ignored the prompt. Big mistake, because it has never appeared again. I consider that a bug that could make a lot of other unhappy customers, so if an admin reads this I hope the issue gets up for a programmer.

• Cannot read disk Blu - ray on the media library

  I have Vista premiun with a blu - ray player. I bought a blu - ray drive, media Center accepts but not does nothing. resume & restart "sail" then nothing, Media Center, it is there

  Regarding your request if Windows 7 can support BD read heres an extract "Microsoft doesn't want of reading support Blu - ray natively on Windows 7. It only supports recording on blank Blu - ray disc media.

  "Support Blu - ray (reading) will be sent by the manufacturers of PC or BD player manufacturers. We have new extensibility in media center for those reading of comics to take in charge the built-in reading. We have no support for the BD data disc burning,"said Steven Sinofsky, senior vice president of windows and windows live engineering group at Microsoft, in a statement released by the Windows 7 Center website. »

  Additional information can be found here: http://windows7center.com/windows-7-news/confirmed-windows-7-will-not-have-built-in-support-for-bluray-playback-only-burning/

• drive Blu - Ray dv8t-1100 is no longer reads Blu - Ray discs

  The OS is Win7 Pro. The Blu - Ray player will read all CD and DVD and BD with no video content. I updated and verified that all software audio/video (MediaSmart, Media Center, Media Player, DivX and RealPlayer) are up-to-date. The BDs are not recognized by any program, and I get a message to insert a floppy disk. I understand that not all of the comics will play on all players, but these are all discs, I've played several times before. If you need additional information about the configuration of the system, let me know and I will provide. Thanx

  I use Norton Security Suite for Comcast. The solution to my problem ranks right up there with "is it plugged in?

  I took a small lint cloth and GENTLY wipe the blue read/write head. Problem solved! Please be others with the same problem, try this first. It can save a lot of upgrade.

  Thanks for your reply.

• How to install the update for bd-2012 from cyberlink on Eve comics on DVD HPMediaSmart.

  have dv7-1270US and reader of specific causes Blu - ray to request the upgrade for BD-2012. I downloaded the update on my desk (it's from cyberlink) and when it works, it finds MediaSmart DVD and it says that must be uninstalled everything first. When I select YES to uninstall MS DVD, I get the message, the Installshield wizard of MediaSmartDVD, "error. The definition of the lost product file. "can only click 'OK '. All other BD and regular movie discs play fine. I can't uninstall HPMediaSmart DVD. Any problem for some comic, I guess. When I'm looking at is a new version - "Knight and Day" with Tom Cruise and Cameron Diaz.

  Hi Stevengwp

  
  As the problem in HPMediaSmart DVD, I would suggest that you contact HP support for assistance in uninstalling the app or any other associates - suggestions

  http://h30434.www3.HP.com/PSG/

   

  I hope this helps.

• Cannot read Blu Rays with software HP DVD play BD and HD DVD

  I have a Pavilion m9060n Vista desktop computer. Running HDMI on a monitor Samsung. It is used to play Blu Rays on the rare times where I tried it, now, it won't. I went through the procedure of updating through Cyberlink and now I'm stuck with this:

  "Do you want to activate your reader now" flashes on the display and the program stops. This happens on multiple disks.

  I reinstalled the DVD playback software, run the Cyberlink BD & 3D Advisor and it passes. I tried to read a comic that I ripped to my hard drive, video playback, but there is no sound, probably due to the fact that he is no longer a healthy option HMDI in DVD playback menu.

  For testing purposes, I have download the Cyberlink PowerDVD 10 trial and everything works fine which must exclude a hardware problem.

  Who did the trick. Everything I threw at it worked well. I tried to do an update, the police is unreadable on my screen and it gave me the opportunity to close this window. Impossible to tell what version it is.

• Card reader causes the crash

  My system info: Acer laptop model 5050

  : Win 7 x 64 (upgrade from Vista 32)

  : 4 GB ram

  : Device Info Manager: ENE PCI Secure Digital MMC card playback controller

  : ENE PCI Memory Stick Card Reader Controller

  : ENE PCI SmartMedia xD Card Reader Controller

  My built in card reader worked fine with Vista. If I insert a card, it says to format the card, then it says Windows cannot format. I tried to update the drivers (3) automatically, but he claims they are up-to-date. Troubleshooting may not resolve problem. I tried to select an airline pilot and it crashed the computer immediately.

  All the ideas!

  Hello Herman,.

  Thanks for posting your query in Microsoft Community.

  I understand you have questions using the SD card reader on Windows 7 computer.

  But I would like to know some more information on this issue to help you better.

  (1) what is the brand and model of the computer?

  (2) that you get an error message even if the computer breaks down?

  (3) have you tried to use the card reader in Windows 7 computer?

  In the meantime, please follow the following suggestions to solve the problem.

  Method 1: Try running the Fixit described in the article, and check if that helps.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2: For accidents in the computer, follow the link below and see if that helps.

  Crashes Windows or freezes

  http://support.Microsoft.com/kb/2681286/en-us

  Note: Data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  Also refer to:

  A card Secure Digital (SD) may not be recognized on a computer Windows 7 Basic.

  http://support.Microsoft.com/kb/981642

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.

  Thank you

• BlackBerry Smartphones CBR Reader BlackBerry 7

  Hello

  I was wondering if anyone knows of a CBR (comic reader) Reader program for BlackBerry 7 devices.

  I have a torch 9860

  Thank you

  Gajariam

  http://downloads.ComicReader.mobi/BlackBerry/?ID=4236469241

  I found the download link for ComicReader Mobi and it works like a charm!