Satellite Pro L770-144: 8 card reader win don't recogize SD card

Similar Questions

• Satellite Pro L770 damaged TVALZ_0.sys driver - where to find?

  Satellite Pro L770 does not start after flashing the BIOS to version 1.3 and install the latest version of Toshiba Service station.

  According to the repair of the Windows system, the c:\windows\system32\drivers\tvalz_o.sys is damaged.
  Where can I find a new driver for tvalz_o.sys intact?

  I tried to repair using repair windows system, but failed.

  The autoinstall tool would provide a solution for my problem?

  I think that the TVALZ.sys file is part of the Toshiba value added package.
  This package is released for Win 7 as well regarding the old Win Vista.

  I think you should try to reinstall this package

  You will find this software on the Toshiba UE driver page.

• Satellite Pro L770 - 12 p - Wake-up on LAN is not possible?

  Hello

  I try to send a wake up message to LAN (WOL) on my laptop to propel to the top.
  I failed to make it work.

  But I do not see a strange thing happening: when I send a magic packet WOL while my laptop is running, the laptop restarts automatically after closing down.

  It seems that the Magic Packet is stored somewhere (perhaps in the NIC?) and is activated once the cell phone is off. I think a magic packet must be ignored when a machine has already begun and not be recorded and executed after the PC is turned off again.

  That being said, I did a test with another PC; I am able to send a magic packet via my business network. So the problem isn't somewhere else. But the BIOS of my Toshiba laptop does not pick up when the machine is off. Only when it is already running.

  Is this a bug and this bug can be resolved?

  Kind regards

  Alfons

  PS I have the latest version of the BIOS (v2.30) and I activated the Wake Up on LAN in the BIOS.

  Post edited by: avanzwol

  Hello

  According to the Toshiba driver page, the last BIOS update was 09/03/12 and I doubt that this new version of BIOS which will be released in the future. The Satellite Pro L770 series is already discontinued.

  However, as far as I know the reactivation of the LAN option can be found in the properties of the LAN card.
  Go to Device Manager-> LAN card-> properties-> Advanced tab
  Here, you should check if the WOL is enabled.

  By the way: the network driver seems to be Realtek. I recommend you update the driver of network directly from the page of the Realtek driver. I know that WOL is controlled at the level of the BIOS, but I think the update is worth a try.

• Satellite Pro L770 - 14 H - the use of WLan and Bluetooth at the same time

  I have a Satellite Pro L770 - 14H and you want to use a Bluetooth mouse.
  With the 'FN' and F8 key I am capable of coding between WLAN and Bluetooth, but it is not possibel to have both at the same time.

  My question is: How can I have WLAN and Bluetooth at the same time?
  To use a Bluetooth mouse with WLAN connection.

  Thank you very much
  Helmut

  Hello

  Using Win 8.1?

  Usually you could turn on and off Bluetooth in Win 8.1
  Settings PC-> PC &-> of Bluetooth devices

  There, you can move the cursor to BT for THE position.

• Satellite Pro L770-14N - cannot find any drivers

  Hi all

  I bought the laptop Satellite Pro L770 - 14N PSK3TE. I installed a clean version of windows 7 ultimate, but I can't find any drivers for this model.

  For example,--> on page dowbload toshiba, is the required WLAN driver not in the download section.
  I have dl the driver from Atheros page.

  Find all the drivers, but we're missing in Device Manager.
  Is a driver package available?

  BR

  Andreas

  Hello

  The Toshiba European driver page seems to provide all Win 7 64 bits of the Satellite PSK3TE L770 Pro series drivers.

  The WLan drivers can be downloaded here:
  http://APS2.toshiba-tro.de/WLAN/?page=downloads
  This is the official Portal of Toshiba WLan and there you can also find Atheros Wlan driver.

• Satellite Pro L770-11F - loss of wireless connection

  I have a portable Satellite Pro L770-11F recently delivered to me in the context of an insurance claim. It has an AR9002WB - 1NG Wireless Atheros adapt 7 is running Windows 7 Pro 64 bit.

  The problem that I am facing is when I download a file from the internet, it stops at random points & is unable to complete the download.

  I can't tell when it happens or how it goes as nothing comes on the screen to tell me any problem. Sometimes I find that even if the PC is always connected to the router (D - Link DIR-615 & only 6 feet from the PC) the map only shows theres no connection to internet even if my Xbox is connected & my phone connects.

  What makes it more rare is that if I connect to the router via an ethernet cable it never is de-energized & download the files without any problems

  The files I download are various sizes of 350 MB to 3 GB, but it seems to do more on files larger than 500 MB so im thinking it's a matter of time/timer or a problem of size of file (wireless only, not connected by cable)

  I had a laptop before it & it worked fine & I have never experienced this problem never

  I changed the power management settings in the option ncpa.cpl & bang as far as I can tell that the drivers are up to date. I'm sure it's a matter of PC and not my internet & hopefully this week I can you confirm that by connecting to an internet friends & see if the same thing happens.

  Any help would be greatly appreciated I have about 14 days left before I can send it to the supplier for an Exchange if it's a hardware problem.

  Thank you very much
  Tez

  Hello

  You said that the Wlan driver is updated, but I recommend you also check Toshiba Wlan portal and compare Wlan driver versions.
  http://APS2.toshiba-tro.de/WLAN/
  Here you can find the latest version of the driver.

  You should also check the Microsoft power management settings.
  There is an option for the WLan to save the power of the dough.
  I recommend to disable this option for better performance.

  Last but not least, you can check and play with the options that are in
  -> Wlan card device manager-> properties-> Advanced tab

  Good luck, hope this can be a little help

• Satellite Pro L770-149 - cannot get working Wlan

  Hello

  I recently rebuilt a Toshiba Satellite Pro L770-149 with windows 7 64 bit, when I installed first the operating system, all the drivers were missing so I installed all of the correct drivers and had run as it was before. Form Apart wireless connectivity,

  It can connect through the ethernet cable and wireless (Fn + F8) is enabled.
  Device Manager, it shows that all the drivers are correct and functional.
  The icon in the taskbar just like a Red Cross, unless I connect the etheret cable.

  Any Suggestions

  Thanks in advance for any help

  I think that support for laptop AR9285 WLan Atheros 802.11(b/g/n chip).
  Have you seen the Atheros Wlan card in Device Manager?

  If so, the WiFi card driver is correctly installed and if you have enabled the wireless network adapter using the FN + F8, then you should be able to configure the WiFi network.

  To do this, you must go to control panel-> Network & Sharing Center-> (left) choose manage wireless networks
  Now choose Add-> manually create a network profile
  Here, you can configure the WiFi using the SSID network and other options needed.

• Re: Satellite Pro L770 - networks detected but inaccessible

  Hello

  Yesterday I received my new toshiba, and since then, I can't connect to any wifi network. My model is the Satellite Pro L770. So I can find many networks, but when I try to connect to one of them, the connection fails:

  -My home network, which is of WPA/TKIP. I enter the password, and after several seconds, I have an error reported, with very little information about the causes.

  -A public network (free, a french access provider), which should actually connect and redirect me to an authentication page. But in this case, I have limited access and if I try to connect to google, I have a DNS problem, so I can't use public network too. Here, I get an IP address, but no gateway, it's maybe normal that I'm not sure.

  I must say that I have an Android phone with which I can connect to my own wifi. I tried to unplug, in order to avoid any conflict of IP, but the result is the same. My machines are ready DHCP, and my router has active DHCP mode.

  Any help would be much appreciated.
  Thank you.

  Hi lapsus63,

  Have you tried updating the driver WLAN and wireless network card appear correctly in Device Manager? You can download the latest WLAN driver on Toshiba WLAN official Portal:
  http://APS2.toshiba-tro.de/WLAN/

  Satellite L770 is brand new model mobile phone, so there is not a lot of discussion about it here in the forum. What you can also do is disabling feature of wireless network adapter in the power management Windows for each power of energy saving profile.

  I hope that helps! :)

• Satellite Pro L770 crashes when mobile broadband is de-energized

  Hello

  I have a portable Satellite Pro L770 running Windows 7. My problem is that when my mobile broadband is de-energized my mouse freezes and I can only close by using the "stop" key as CTRL/ALT/DEL will not work in closing the program.

  Any ideas anyone?

  PADI.

  But if you n t mobile use in wide band, everything is OK, right?
  Do you use the touch pad or external mouse?

• Computer laptop Satellite Pro U400-144 may be downgraded to Windows XP Home edition?

  I want to buy a laptop Toshiba Satellite Pro U400-144.
  Please confirm with me if I change my OS XP to Vista Home Premium without any problem.

  I look forward to hear from you.

  Kind regards
  Kabre seulin

  The SATA drivers are part of the Intel Matrix Storage Manger.
  Storage Manager can be downloaded from the Toshiba driver page or from the page of Intel.

• Satellite Pro A100-622 can not read the card SD and Memory Stick with Windows Explorer

  I have a Satellite Pro A100-622 running MS Vista Home Basic Edition. I tried to use the card reader integrated with SD and Memory Stick card but cannot view the contents using Windows Explorer.

  In both cases, the laptop recognizes the card and try to install new hardware. Unable to do so, he asks the drive of the software provided with the cards. Any software not provided with a card and I cannot find drivers to make the drive work.

  The only application that I can find on the laptop that is associated with the player is a module of SD formatting, but I don't want to format the card (s) I want to just read the current content of them and add files.

  Any ideas?

  Hello

  You can download the drivers (and especially in your case for the sd-card-reader) here:

  http://PC-support.Toshiba-Europe.com/Vista/

  and here

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  So the other point is the service of the SD card must be enabled in the start menu-> Control Panel (change to Classic view)-> Administration-> Services-> Chip card (at this point, you must activate the service and configure it to start at windows startup).

  If you have any other questions, just ask. ;)

  Good bye

• Satellite Pro 4600: Wireless lan driver for Win XP

  Hello

  I have a Toshiba Satellite Pro 4600 with a built-in wireless lan mini pci card. My problem is that I only have Windows XP! But in the toshiba Download Center, there is only the driver for Windows 2 k. What can I do to use the complete wireless lan card controlled? There is a wireless lan client Manager program under Win 2 k called. Can someone help me?

  Good bye

  A.

  [Edited by: admin on 5 August 05 23:00]

  Hello

  Basically, the WIFI connection can be configured using settings in Windows and it is not necessary to use a WLAN client software.

  Good bye

• Satellite Pro M70-113: Express Card slot - what for?

  Hello

  can someone tell me what is the slot for card express on my satellite pro m70-113 like what material can I connect to it for expansion...

  Thank you...

  Post edited by: ashishsoni

  Hello

  I guess that your average slot on the right side of the laptop.
  Well, the express card expansion slot can accommodate two standard module formats: an expressCard/34 and expresscard/54 module to the module. An expressCard module is small, modular add-in card technology based on USB and PCI Express interface.

  Please read this article:
  http://www.hardwaresecrets.com/article/89

  Good bye

• Satellite Pro P300 - update graphic card and CPU

  I have a Satellite Pro P300 and I was wondering if the CPU or the graphics card can be improved?

  I really like my laptop, but an upgrade is imminent and before I take the plunge I just want to see if it is all options other than a new laptop.

  Hello

  Processor and graphics card update is not supported and there is no list with compatible processors. If everything is on your own risk. In the worst case a new processor will not be recognized from the motherboard or BIOS, probably you need a new module of cooling too so I wouldn t this

  In addition, the graphics card is attached to the motherboard and cannot be exchanged.

  => [Can I upgrade the CPU, graphics card or motherboard in my Toshiba laptop? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=13]

• Satellite Pro P100 - Synaptics touchpad problem with Win 7

  Satellite Pro P100 with Synaptics Touchpad, was now running Vista, Win 7 64 bit.
  The original driver had an option "disable when the external pointing device connected.

  I installed a Synaptics Synaptics_v14_0_3_C_XP64_Vista64_Win7 driver - 64_Signed_default.exe that does not have this check box.

  It works fine except that sometimes the Microsoft Mouse becomes works all the seconds that she or the touchpad to fight everyone. I have to disable the touchpad.
  So the next time I turn. If I do so without a mouse, I can't use the touchpad until I plug the mouse, turn it back on, then disconnect the mouse.

  Thank you

  Hello

  Try to install the Synaptics drivers and Alps touchpad page pilot European Toshiba.
  Choose the touchpad Win 7 drivers out for a satellite L500 series.

  By the way; the touchpad can be enabled and disabled by using the FN + F9 button combination. It is not necessary to have all the options if FN + F9 works very well.