Reading file properties in the labour code

Similar Questions

• Windows has prevented my device Infarred "Serial Cable using IrDa Protocol" to 43 of the Labour Code

  Windows has prevented my device Infarred "Serial Cable using IrDa Protocol" to 43 of the Labour Code

  Can someone help me with this please. Can I change the value and it Peel attention but in a few moments it will return on attention. I have no idea how yo what is causung this also...

  Hello

  ·          You have installed the latest Service Pack for Vista?

  Uninstall and reinstall the device.

  a. Click Start.

  b. in the type of search box of start of "devmgmt.msc" and press ENTER.

  (c) in Device Manager, look for the device that has an error and expand the device with the error.

  d. right-click on the device with the error and uninstall.

  e. restart the computer and check if it installs the drivers and it works great.

• When I try to create a new folder of file I get the error Code 0 x 80070570

  When I try to create a new folder of file I get the error Code 0 x 80070570

  Hello Denny,

  
  Thanks for the reply with the State of the question, sorry for the caused incontinence.
  I suggest you follow the suggestion of Babu V replied on 16 may 2013
  Reference:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-files/unable-to-create-a-new-folder-in-c-drive-get-the/75bbf947-094a-45E6-baf6-6b188f8d8ca0

  CHKDSK WARNING: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Please respond with the State of the question of assistance in
  Windows.

• How to read file returned by the file picker

  I'm going to obviously stupid here, but for the life of me I can't figure out how read in a text file returned by the file picker.  I am currently getting the good full path of the file in the file picker but where do I go from here?  BlackBerry.IO.file does not seem to exist in Blackberry 10 and I'm confused as to how I would use the HTML5 File API from only a file returned by the file picker path.

  Can someone please spit out a quick and dirty example showing me the rudiments of reading in the data file from a path returned by the file picker, please?

  Thank you very much

  DM

  Don't know if you have the path to the file, and then you left there. One thing to note. The file MUST be inside you bar (sandbox) OR you need to add the <> ermit > access_sharedermit >
  and then he can live the file in the shared folder on the device.

  Here is a code that you can use to read a file. I poached it our docs found here:https://developer.blackberry.com/html5/apis/blackberry.io.html

• Reading file stored in the Application .bar

  I'm trying to store data in a flat file compressed in the .bar file and read the first time the application is run to build the database.  I tried several approaches but none have worked.  Here is my setup and the code I use:

  The file I am reading is data1.txt folder root (same place as index.html)

  config. XML

  
  http://www.w3.org/ns/widgets" xmlns:rim="http://www.blackberry.com/ns/widgets" version="1.0>
    .
    .
    .
    
    
    
    
    
    
    
    
    
    
    .
    .
    .
  
  

  E/s of JavaScript files

  function firstRun() {
    filepath = "local:///data1.txt";
    if (blackberry.io.file.exists(filepath)) {
      blackberry.io.file.readFile(filepath,handleOpenedFile);
    } else{
      alert(filepath + " not found");
    }
  }
  
  function handleOpenedFile(fullPath, blobData) {
      alert("file opened: " + fullPath + " containing: " + blobData.length + " bytes");
    }
  

  When it works I get the alert indicating the file does not exist.  The development kit software that I use is the 2.3.0.9 version.  Any ideas?

  I have a similar file and an XHR to get to work.  Take a look at my answer in http://supportforums.blackberry.com/t5/Web-and-WebWorks-Development/Reading-local-txt-file-gt-string... for more details.

• webutil read file function finds the file on the application server

  Hello

  I want to select and read a file (possibly .pdf) and save it to the database.

  To achieve this, I:

  1) created a table, deltia (key primary aa, varchar2, blob, other columns... image_blob, filename)

  (2) created a block form of database based on the deltia table. The element of the "image_blob" column type is image

  and the image format is "tiff".

  (3) wrote the following piece of code to perform the selection of local file (successfully)

  Select the FUNCTION (i_FileFiltre IN Varchar2 default vDefFileExt)

  RETURN VARCHAR2

  IS

  vPath Varchar2 (128);

  vFileName Varchar2 (256);

  vFileFiltre Varchar2 (200): = i_FileFiltre;

  Begin

  vPath: = CLIENT_WIN_API_ENVIRONMENT. Get_Temp_Directory;

  vFileName: = WEBUTIL_FILE. FILE_OPEN_DIALOG

  (

  vPath,

  '',

  vFileFiltre,

  "Select the file to download.

  ) ;

  Return vFileName;

  END selection;

  The form above function call is:

  Declare

  vFileName Varchar2 (200);

  Begin

  vFileName: = PKG_File_Ops.Selection;

  If vFileName is not null then

  : eq_deltia_metakinhshs. Filename: = vFileName;

  End if;

  End;

  (4) wrote the piece of code to the game/place the file selected in the form element "image_blob", as following:

  client_image.read_image_file (: eq_deltia_metakinhshs.filename,)

  substr (: eq_deltia_metakinhshs.filename, instr (: eq_deltia_metakinhshs.filename,-1)).

  "eq_deltia_metakinhshs.deltio_image");

  The call to the packaged procedure client_image.read_image_file does not work. It returns error

  "47109 - cannot locate the/u01/oracle/temp /... image file"

  In other words, the system will search to read the selected file locally on the server App.

  What can be the cause of this?

  With regard to the content of the webutil.cfg of the App Server. :

  # ---------------------------------------------------------------------------

  # webutil.cfg - WebUtil default configuration file

  # ---------------------------------------------------------------------------

  # This file contains all the configuration settings for webutil. These are some

  # divided according to the following sections:

  # 1. Logging options

  # 2. Installation options

  # 3. Upload a file and download Options

  # 1. Logging options side server for recording the log messages and errors

  # You must set logging.enabled to true to allow registration of mid-range. Without this

  logging of mid-range # will not be any PL/SQL or URL options

  # are provided to turn it on. Once recording is activated the other settings are

  # in-game.

  #

  # Details

  # -------

  # logging.file: sets the file name and location of the log file.

  # Note that WebUtil does no management of the log file. You can

  # need to manually clean this file at any time.

  # logging.enabled: can be TRUE or FALSE

  # logging.errorsonly: can be TRUE or FALSE. Parameter True will ensure that

  # only errors and the normal information log messages

  # are written to the log file. It would be for the use of the product,

  # normally be set to TRUE

  # logging.connections: can be TRUE or FALSE. Setting to true causes each

  connection from a client using WebUtil for write in #.

  # the log that it puts in place.

  Logging.file =

  Logging.Enabled = False

  Logging.ErrorsOnly = false

  Logging.Connections = false

  # 2. Installation options

  # WebUtil needs to download files on the client to perform

  # some operations such as OLE integration or access to the registry. These files

  # are downloaded on the client when webutil is run for the first time.

  # Subsequent executions will use the dll in the cache. Define the location of the

  # These files on the server and the location on the client.

  #

  # Here's a chart that shows numeric constants and their meanings. They

  # are used in configurations of installation options. These constants are defined

  # in WEBUTIL_CORE package spec. Note that the Processor Architecture of the Client operating system

  # is generally the architecture of the JAVA virtual machine that runs on the client,

  # not necessarily even the real client architecture of BONE.

  #

  # < Os - > Client OS family < arch - > processor for the Client operating system Architecture

  # 0-0 - 32-bit Windows

  # 1 Linux 1-64-bit architecture

  # 2 SOLARIS

  # 3 HP

  # 4 AIX

  # 5 mac

  # 9 unknown

  #

  # < Package > - package name

  # 7 WEBUTIL_OLE2

  # 9 WEBUTIL_C_API

  # We do not yet have downloads for other packages. If you need, refer

  # Spec package WEBUTIL_CORE for constants of other packages

  #

  # Details

  # -------

  # NOTE: For all < arch > parameters field is optional. Without this field, the

  # setting will apply to the client 32-bit and 64-bit OS (FMV)

  architectures of #.

  #

  # install.syslib.location. < os >. < arch >:

  # The virtual path of the directory containing the webutil library files the

  server-side of #. This must be an absolute URL or a relative URL

  # for the documentbase.

  # NOTE: < os > field is optional for this parameter. In the absence of a framework

  # which has the client OS and ARCH, it will use

  # install.syslib.location. < arch > cannot be specified if < os > is omitted.

  #

  # install.syslib.location.client. < os >. < arch >:

  # The path to the directory on the client machine where the webutil library

  # files will be downloaded. This must be an absolute path or a path

  # which is the profile of the client user or at HOME. Directory will be created

  # If necessary as well as other parent directories. If the path is

  # do not set, it will be treated as a special case where the libraries will be

  # downloaded to the client JRE\bin (windows) or JRE/lib (unix). If this

  # Directory is changed, all libraries will be redownloaded again.

  #

  # Please keep in mind that other forms server may also have a similar

  the location of # and so libraries could be overwritten even when

  # client running webutil server of different forms. It is therefore

  # advised that the location has a subdirectory that may be unique to your

  # Server, such as the name of the host server. You could use $(SERVERHOST) in the

  # location. This string will be replaced with the actual hostname of the server

  #

  # install.syslib. < os >. < arch >. < package >. < n >:

  # The names of the libraries required for the particular webutil beans. The

  # format of it's name. size | version | showDownloadDialog. Several libraries

  # can be downloaded per package. But make sure the values < n >

  # row and start at 1 for a given operating system, arch and package together.

  install.syslib.Location=/webutil

  install.syslib.Location.0.0=/webutil/Win32

  install.syslib.Location.0.1=/webutil/Win64

  # Add/Edit the following if you want to specify a different location client

  # where syslib libraries.

  # Format:

  # install.syslib.location.client. < os >. < arch > = < location >

  \win32 install.syslib.Location.client.0.0=webutil\syslib\$ (SERVERHOST)

  \win64 install.syslib.Location.client.0.1=webutil\syslib\$ (SERVERHOST)

  # Change the size and the version if necessary, such as when the upgrade of the library.

  # Normally this is not necessary since most of these libraries are equipped

  # settle. Jacob does not however come with installation

  # Format:

  # install.syslib. < os >. < arch >. < package >. < n > = name | size | version | showDownloadDialog

  1.14.3 - install.syslib.0.0.7.1 = Jacob - x 86 DLL | 102400 | 1.14.3 | true

  1.14.3 - install.syslib.0.1.7.1 = Jacob - x 64 .dll | 117760 | 1.14.3 | true

  install.syslib.0.0.9.1 = JNIsharedstubs.dll | 45056 | 1.0: true

  install.syslib.0.1.9.1 = JNIsharedstubs.dll | 58368 | 1.0: true

  install.syslib.0.0.9.2 = d2kwut60.dll | 81920 | 1.0: true

  install.syslib.0.1.9.2 = d2kwut60.dll | 102400 | 1.0: true

  # You can also add your own libraries here, for example

  #install.syslib.0.0.user.1 = testwebutil.dll | 204872 | 1.0: true

  #install.syslib.0.0.user.1 = ffisamp.dll | 40960 | 1.0: true

  #install.syslib.0.1.user.1 = ffisamp.dll | 35328 | 1.0: true

  # 3. Download / upload options

  # For file upload and download options, you can set the default locations

  # on the server that webutil can use as a work space. Optionally, you can pass

  off # upload and download

  #

  # Details

  # -------

  # transfer.database.enabled: can be TRUE or FALSE - allows you to activate or

  # disable upload and download of data

  #                                server.

  # transfer.appsrv.enabled: can be TRUE or FALSE - allows you to activate or

  # disable the upload and download from the

  application server #.

  # transfer.appsrv.workAreaRoot: the root of the location in which can WebUtil

  # store temporary files uploaded by the client.

  # If no location is specified, application server

  # user_home/temp will be assumed.

  # This place is always readable and accessible writable

  # No matter the parameters of

  # transfer.appsrv. * are. This parameter is

  # If you need side customer

  # READ/WRITE_IMAGE_FILE procedures.

  # transfer.appsrv.accessControl:Can be TRUE or FALSE - allows you to specify

  # that loads and downloads can occur

  # the directories named in the

  # transfer.appsrv.read.n and

  entries transfer.appsrv.write.n # and their

  subdirectories #. If this parameter is set to FALSE,

  # transfers can happen anywhere.

  # transfer.appsrv.read. < n >: list of directory names that downloads can read

  #                                from.

  # transfer.appsrv.write. < n >: list of directory names that mail can write

  #                                to.

  #NOTE: by default, the file transfer is disabled by security measure

  Transfer.Database.Enabled = True

  Transfer.appsrv.Enabled = True

  transfer.appsrv.workAreaRoot =

  transfer.appsrv.accessControl = FALSE

  #List transfer.appsrv.read. < n > directories

  Transfer.appsrv.Read.1=c:\temp

  #List transfer.appsrv.write. < n > directories

  Transfer.appsrv.Write.1=c:\temp

  # 4. Others

  # Details

  # -------

  # BlockAllowHeartBeat: Continue the heart beat communication with the

  # Server when set to TRUE. By default, the value is

  # the value False. If set to False, there is no heart

  # fight mode blocking communication.

  BlockAllowHeartBeat = False

  Notes:

  The database version is 11g v.2

  Forms services version is 11g v.2

  The webutil has been installed and configured (I have done a project that requires reading a

  saved locally excel file - using webutil_ole2.)

  I didn't notice an error in the Java console.

  Thank you

  SIM

  This error indicates that your server is a unix platform: 47109-cannot locate image file/u01/oracle/temp /

  
  

  If it is correct, then your webutil.cfg is not been set correctly.  Entries for transfer.appsrv are in reference to the appsrv and not the client.  So you currently C:\temp which is a directory of Windows and not Unix.

  (2) Transfer.appsrv.Read.1 =c:\temp. It is already set.
  

  3) Transfer.appsrv.Write.1=c:\temp. It is already set.

• How read file HDA with the methods of the Complutense University of MADRID.

  I'm reading file HDA to standard java AAU code and I find the code on a forum below.

  But my problem is that when I pass the value to read his statements "NULL" every time. any one can help me.

  Public Shared Sub main (String [] args) {}

  DataBinder dataBinder = null;

  String dir = System.getenv ("HDAFILE");

  String file = "20130729_132245_931.hda";

  DataSerializeUtils.setDataSerialize (new DataBinderSerializer());

  intradoc.resource.ResourceUtils.serializeDataBinder

  try {}

  DataBinder dataBinder = ResourceUtils.readDataBinder (dir, file);

  Dim str As String = dataBinder.getLocal ("loadOrder");

  System.out.println ("loadOrder:" + str + dir);

  } catch (Exception e) {}

  System.out.println (e);

  return;

  }

  }

  Kind regards

  Deepak Petitjean

  Use the method get ("String") instead of getLocal("String");

  as,

  Dim str As String = dataBinder.get ("loadOrder");

  thnks

• File &gt; properties: all the gray fields / inaccessible

  I use Acrobat Pro 11. I want to change the properties of the document, but they are greyed out. What I am doing wrong?

  

  I see that the application that created the PDF file is FormsCentral, if the document has probably been activated drive. You can select: file > save a copy

  Open the new file to change things and then reactivate the file: file > save as other > Reader Extended PDF > activate tools more

• File extraction gives the error code 0x80004005

  I received a file compressed by e-mail.  The sender has tested the file successfully.  When you try to extract the file I get 2 messages.  Firstly, Windows can not extract because the destination folder could not be found.  Second error message 0 x 80004995.  I tried to move the file to another folder, but it's the same thing.  How can I fix these problems?

  I don't know why you receive these error messages, and you can't find any information about the error code (be it in Bing, Google, or Microsoft Knowledge Base).

  Try to use another program to extract the file.  Try 7-zip (which is free) to: http://www.7-zip.org/.  Maybe the extraction will work if you are not using Vista extraction program.

  I hope this helps.

  Good luck! Lorien - a - MCSE/MCSA/network + / A +.

• For a given file, how to add and change file properties on the Details tab, for properties that are not in the properties list?

  Now, I am aware of the modification of the properties of the file is simple in Windows 7 Explorer. Select a file, 'Properties', then tab "Details".  Some are not editable, and that's understandable.  Click on next to any area classified as year, Genre, Publisher, etc. and the apply.  No problems so far.

  Then of course in Explorer, when you right click on a column header, you get several choices of column beyond the usual that is displayed by default; Date, the Type, size, etc.  But, there is an option "More...", which has up to now, MUCH more useful properties to choose from, such as the model project, Department, job statusand so on.

  It's fantastic!

  But when you look into the details of any given file, none of these additional properties even are listed to be edited.  Why offer to view these details, if you don't change them, or add them to different files?  I must be missing something.  I do not need to add my own custom details, this additional list has a choice, that I need; If only I could edit the files to get this info.

  How to add and change these properties to files?  Word, Excel, MP4, AVI, JPG; I would add these properties, so I can set directly in the Solution Explorer, as you would by name or Type.

  Any help would be greatly appreciated!

  My experience is that most of these 'extra fields' no existence not as fields in the directory (folder) itself.  On the contrary, these fields exist in the target file itself. Each file type has its own format and established file except for the types of files that belong to Microsoft, Microsoft cannot control or arbitrarily change the format of a particular file type.

  For example, a ".jpg" file  The format of this file type allows a large number of areas such as comments, Tags, date taken, opening, device manufacturer and so on.  If you go into the properties on a .jpg file, you will see a lot of them and will be able to change.  After changing any of these fields, you will find that the file itself has been changed to contain this information (as can be verified by the parity of the file and to come check upward with a different checksum).  If you display one of these fields in Explorer and 10000 ".jpg" files in this folder, then Explorer must open each of these 10000 files to extract the data in the corresponding fields, you have chosen to display.  May take some time.

  Compare that to the same picture saved to a file ".bmp".  The ".bmp" format has no provisions for any of these fields, so you will not be able to view, save, edit, or sort by them.  If the editable fields are directly related to the type of file that is displayed.

  Microsoft has apparently interviewed a lot of file types and made a compilation of the editable fields in each type of file and the Union of the selected fields in which can be displayed and modified.   That's apparently what you see in the option «More...» ».   So, in summary, the file type determines which fields are available for editing and posting.

  HTH,

  JW

• I see unknown accounts when editing file properties on the Security tab.

  Original title: file security accounts

  I noticed that when we look at some file properties, the Security tab shows an account listed as "account unknown (with the following information of number/letter).  What is this and can it be deleted?  It grows on files a little, but no more.

  The SID that you see refers to an account that you deleted at some point in the past. Nothing to worry about.

• Reading file and dump the data into the database using BPEL process

  I have to read the CSV file and insert data into the database... To do this, I created some asynchronous bpel process. Adapter filed added and associated with the receive activity... Adapter DB has added and associated with the Invoke activity. Receive two total activity are available in the process when trying to Test em, receive only the first activity is complete and awaits the second receive activity. Please suggest how to proceed with...

  Thanks, Maury.

  Hi Maury,

  There is no need in step 2 that u mentioned above. I donot find useless a webservice?

  The process will be launched by the CSV file, then using the processing activity, you can put it in the DB.

  There should be no way where you can manually test it by giving an entry. All you can do to test is to put the file in the folder you mentioned when configuring the file adapter.

  You just need to have the composite as below:

  ReadCSVFile---> BPEL--> DB adapter

  And in your BPEL process:

  Recieve--> Transformation activity--> call activity

  Try to work on some samples listed on the oracle site and go through the below URL:

  The playback of the file adapter feature using

  Thank you

  Deepak.

• Read file without knowing the full name

  Dear all,

  I want to read data from a file, but without knowing the full name of the file.

  For example I have data files in a program that the first letters of the data files are the date and the rest of the numbers, I can't predict IE 20081027_5323621.

  Is it possible to read this file in the knowledge that the characters that correspond to the date?

  Thank you!

  OK, that worked well.

  Thank you very much!!!

• Create file .properties for the scenario, the crosshair, slot... ?

  Hi all
  
  
  If I create location, scenario or the crosshair in the ACC for an application, then where their related .properties files are saved... ? If not the .properties files are created, then how .properties files for them... ?
  
  
  Thanks in advance,
  Laurie Bovilla

  Already asked this before?

  Where Targeter slots and scenarios are recorded the property files... ?

• How do I add a comment in a php file which has the html code

  Hello

  I have a html file that I renamed .php after the addition of a form. I discovered that the text of html comment I used - <! - this is a comment--> - affected how the page rendered, especially in IE9.

  My question is, now that it's a php file I need to change the syntax of comments? I started to do so using the button 'apply comment' in CS5 for example of syntax: <? PHP / *? > form <? PHP * /? >.

  What is the right way to do it? It gives 'php' icons in Design view, but seems to go ok.

  Thank you

  > I have a html file that I renamed .php after the addition of a form.

  I > discovered that html comment text I used - -.

  > affected how the page rendered, especially in IE9.

  I can't imagine why. HTML comments are ignored by the customer - is not serious if it's in a .html or .php file.

  > My question is, now that it's a php file I need to change the syntax of comments?

  No, PHP comments are comments that are inside a block of PHP code. Just because the file has a. PHP extension does not mean that you need to change your comment syntax. Use html inside blocks html comment syntax and syntax of php inside blocks of php code.