Reading Mercury and Quadro K2000 engine?

Similar Questions

• Engine reading Mercury and NVIDIA cards

  I assumed that this has been discussed in the past, but my research turned up empty.

  I run CS4 body for a while but am upgrading to 5.5 organization and I also want to go ATI to NVIDIA to get CUDA mercury reading improving.

  I'm glad I checked that I discovered that only a very few cards consumer (no Quadro) is listed.

• GeForce GTX 285 (Windows and Mac OS)
• GeForce GTX 470 (Windows)
• GeForce GTX 570 (Windows)
• GeForce GTX 580 (Windows)

I want to go with the consumer line because my PC is also used for other things and is not a PC edition devoted.

If it's true that these are the only ones that work?  Or is that a lot of PC of areas where things work (such as memory and motherboards), but not everyone is put to the test...

I saw a site where it said that you had to hack a file or something in order to get other cards NVIDIA Cuda to work in the mercury with Pr Pro mode even if they were equal to or greater in power than these...

Thanks for the help,

BJBBJB1

I guess the question is if you think Adobe is likely to reduce the number of cards taken in charge or he hard code in the program.  Personally, I think CS6(+?) could fully support CUDA cards.

FWIW, I just do the hack with my GTX 560 Ti card and it worked.  I'm running the PPBM right now.  Unfortunately, my AMD Opteron 165 system based, RAM DDR (not number) based has a LARGE number of bottlenecks that kill performance, BUT it's much better with the 560 card than without!

The previous card, I had was an ATI Radeon X1950XTX.  However, I gave up on them after that they don't provide for her drivers for Win7.  Yes, the Vista 64 drivers worked, but without support, I have a quite expensive anchor point.  IMO, Nvidia, however, is much better than ATI in driver support.  So I will stay with them for a while.  Just my experience, though.  Hey, I have a few old 6600GT cards and Nvidia has drivers for Win7 64-bit available.  And it's an old card.  In any case...

The GTX 570 should provide more than enough power for the current iterations of first.  ATI provides an 'equivalent' (OpenCL), but Adobe, for some reason, is not support.

I hear you on Adobe supporting a larger number of CUDA cards.  I know that CUDA programmers and they tell me that the code is not limited by the cards.  You call the driver/CUDA features card and it works.  So I'm at a loss to understand that.  It simply limits their customer satisfaction.  It is not like they are not big enough to test.

FWIW, the GTX 560 it seems to work well with CS5 and I guess would work well with CS5.5.

Good luck in your adventures.  As I buy the additional hardware, I'll try to update here.

Scott

• I downloaded an upgrade to my adobe reader today, and since my search engine yahoo has increased and will not change to google. I have a macbook pro, help please? Anyone know how I can change this back? I tried through my settings but it

  I downloaded an upgrade to my adobe reader today, and since my search engine yahoo has increased and will not change to google. I have a macbook pro, help please? Anyone know how I can change this back? I tried through my settings but it does not work

  Hi Iférouane,

  If you are using Safari as a web browser: -.

  • Open Safari, go to the Safari menu > Preferences > General and set Google as homepage. Then, choose Google as your default search engine.

  If you use Google Chrome as the web browser: -.

  • Open Google Chrome.
  • In the upper right corner of the page, click on the Chrome Chrome menu > settings.
  • In the 'Search' section, select Google from the menu drop down.

  Let me know if you are still having a problem.

  Kind regards

  Nicos

• Quadro K2000 mercury hardware Acclerated encoding

  Hello

  I have a question about hardware acclerated encoding with a Nvidia Quadro K2000.

  We got a video clip we want to encode in 720 p H264. Graphics card has been recognized by the first, first himself spent the correct hardware acclerated encoder.

  However, it does not, is not Visual coding unless I select the encoder software. Driver is downloaded from Nvidia site again.

  There is no error message, it just goes to the display of progress bar and after that: nothing, no progress at all, no file is written to disk.

  Any ideas? Are there drivers special neeeded? Is the map not supported even though it is listed as a supported?

  Just to summarize: after adding more ram, more cards graphics best CPU, HDD plus, the solution was as follows:

  Delete logo eps still of the movie file and replace them with a jpeg.

  The strange thing here, is that sometimes the encoding was fine with the IP. Now, after having removed the eps, it encodes each time...

• Quadro K2000: Acceleration GPU LR 6

  In Lightroom GPU acceleration doesn't seem to work with my nvidia Quadro K2000 despite the installation of the driver the most recent and updated Lightroom 6.6.1. What is the problem here? GPU Quadro K2200 supports Lightroom (it is even announced by nvidia to work fine with Lightroom), and the K2000 is not an old model... but I have not found on the question of whether this card is supported.

  My system features:
  Windows 7 64 bit
  Intel i7 860 2, 8 GHz
  12 GB OF RAM
  6 of Lightroom

  excerpt from "Help-> System Info" inside LR6:

  Check the supported OpenGL: failed

  Provider: NVIDIA Corporation

  Version: 3.3.0 NVIDIA 364.72

  Renderer: Quadro PCIe/K2000/SSE2

  LanguageVersion: 3,30 NVIDIA via the Cg compiler

  This card meets the requirement of the open GL 3.3?

  I'm no expert on GPU, but I can tell you that I have no problem using the GPU in Lightroom with the K2000 Quadro on my Windows 7 computer.

  It seems that you don't have the latest driver installed.

  If you go to the NVIDIA website, you will see that the latest version is 368.86 - you 364.72.

  This is my system info:

  Graphic processor News:

  Quadro PCIe/K2000/SSE2

  Check the supported OpenGL: past

  Provider: NVIDIA Corporation

  Version: 3.3.0 NVIDIA 368.39

  Renderer: Quadro PCIe/K2000/SSE2

  LanguageVersion: 3,30 NVIDIA via the Cg compiler

• Help? the source volume is read-write and can not be disassembled...

  I use 10.11.5 on an iMac 21.5 ", end of 2009 and I want to restore the OS X 10.11.5 to HD on an external drive but I get this message" Source volume is read = write and cannot be disassembled, so it cannot be copied from block. "  I can find answers do not address El Capitan.  Help would be greatly appreciated.

  .. .Goldie

  You use disk utility's restore feature?

  If the HD has a recovery partition, you can make starting in place of the recovery.

  Or you can use SuperDuper! (the basic version is free and can copy the entire disk, the paid version allows "smart updates", which copies only files that are different, saving time) running on externally to perform the copy.

• Portege R500: Card reader SD and ODD do not work - drivers needed

  I have laptop portege R500, product number: PPR50E-04X04WCE.

  last year, I changed the operating system and installed windows 7.
  Since then, I can't use the dvd drive or the sd card reader.
  And the control panel it apears two unknown devices, but I can´t find the controllers for these.

  What can I do to fix this?

  I assume you found unknown devices in Device Manager.
  Check it please http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=78
  Here you can find instructions how to identify the unknown devices.

  I checked the Toshiba download under http://www.toshiba.eu/innovation/download_drivers_bios.jsp page and your Portege is listed there, but under the option ARCHIVE. It is supported for Win7 so there is no problem to install all the drivers available.

  Check it out please and let us know if you still have the same problem.

• Re: My driver TEAC DV-w28ECT used to read DVD and CD now it reads only DVDs

  My TEAC DV-w28ECT driver used to read DVDs and CDs, now, he reads only DVDs. What's happened and how can I solve this problem? I have Windows Vista

  Try to remove the CD/DVD filters in the registry.
  When the associated CD/DVD (such as iTunes, Nero, virtual CD software), the software is installed, they install filters in the registry, which can cause compatibility problems.

  (1) run Regedit (start-> Run-> Regedit)
  2) navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  (3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
  (4) restart.

  If your CD/DVD programs stop working, you will need to reinstall them (preferably with an updated version).

  This utility can remove the filters for you:
  http://www.CSD.Toshiba.com/content/support/bulletins/su2065061/RmvFltrs.exe

• Cannot read CDs and DVDs on satellite C660

  Hello

  I bought my PC laptop Toshiba Satellite C660 in December 2010.

  I was not able to play any CD or DVD.

  I checked on the properties of Media Player and found that the driver had been disabled.

  I know not how get the laptop to read CDs and DVDs, does anyone know how or why this happened? Is - this rare?

  Thank you

  Natsophia

  I do understand that with the driver disabled.
  Optical drive is listed in Windows Explorer?

  If you can't find it listed in the Device Manager and if it is in the unknown device list try this please:
  http://APS2.toshiba-tro.de/KB0/FAQ8101LA0000R01.htm

  It is described as a Vista but there the same should be under Win7. Please try it and send feedback.

• Satellite A50 543 reads CDs and DVDs sporadically

  I have a problem with my DVD-ROM in my laptop. It only reads CD and DVD sporadically. But most of the time that I dwell in a DVD and it try the bed. But after a few seconds it stops and the DVD - ROM led lights constantly.

  My question is, can I get a new DVD-ROM? Or I have to send it back to Toshiba?

  Sorry, my English is not the best ;)

  Hello

  For me, this looks like a disk failure. After repeatedly the lens can not calibrate properly and so sometimes s not possible to read, burn with different media.
  You should know that internal portable players using different parameters like master/slave or c - salt. These parameters is not editable as on drives for desktop PC.
  Therefore, it is very important that you will use and bye a compatible.

  If you want to know which drive will work on your laptop, so I recommend asking the Toshiba service partner for details.

• Satellite A60-302: CD Player read DVDs and CDs but not burned discs

  I have a Toshiba laptop: Satellite A60-302 and I have a problem with the cd player. It can read DVDs and records I buy but it will not read burned discs (even the ones I burned with the portable computers own burner). Only from time to time, he will read a burned disc.
  I tried to clean the eye of laser of cd players, but it did not help.

  Anyone know what could be the problem?

  Hello

  This sounds like the CD burner doesn't burn CD correctly.
  You suggested that you used different types of CD.
  In the user manual, you will find a list of compatible media.
  These media has been tested and it works correctly.

  But if this happens with all CD, so possibly the drive cannot work properly and only a replacement would solve that problem.

• NEITHER 9207 reading current and voltage at the same time channels

  I have a cDAQ-9178 chassis USB-three cards NI 9217 RTD, three cards 9263 0 - 10V and one the output OR 9207 16 channels analog card. What I m trying with this kind of things, is to read all the analog input channels (information of transducer, temperature, pressure, etc.) and adjust my controls to process with the analog output channels.

  My problem at the moment is the following:

  When I create tasks with DAQmx VI:s, how to create a task that reads current and voltage on the 9207 channels at the same time?

  When I created a task for RTD-channels (16), a task for the outputs analog 0 - 10V (12), a task for the analog input 4-20mA (8) and a single task analog 0 - 10V input (8) I get an error-50103. I think it s because the tasks of current entry and voltagge are trying to use the same CAD at the same time and LabVIEW informs that "The specified resource is reserved. Tasks are to leave so that the analog output task starts first, then I merged all clusters of the error and the rest of the task are started by an order to current input-> input-> RTD input voltage. I get this error after the current enter task started and enter voltage task begins.

  Because I m new on the LabVIEW and stuck in that time, I wanted to try the forum to find answers. I tried to find if someone else was having the same kind of problem, but with a quick search, there was none. I m in a bit of hurry, so I apologize if West a subject with a happy for that and I missed too much according to me.

  Really, the best way to do it is just adding 8 channels of voltage at a task, then 8-channel current, somewhat like this:

  

  Then spread over different channels when you read later:

  

  It should run without error.  It always is multiplexed to sampling, but it will be much faster to create two separate tasks.  There will be between 2ms (mode high speed) and 52ms (mode high resolution) between each playback channels, but it will still be much faster than the permutation of the tasks.

• difference between VISA READ buffer and chain

  Hello I'm just starting to use the VISA read and write the function in labVIEW

  everyone knows what are the degree between reading VISA and the string buffer? and the comparison of the VISA Write buffer and chain

  Thank you

  Ein salvation,

  "read buffer" is the string given by VISAReadlabel, "write buffer" is the label of the string that is expected by VISAWrite!

  There is no difference...

• is it possible that network admins can read emails and laptops on the network of shadow?

  original title: Microsoft Security AMENDMENTS

  On a microsoft network, is it possible that network admins can read emails and laptops on the network of shadow?  If so, how can we tell if and when they do it?

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Forums TechNet Windows 7 Technet.

  Here is the link:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  Hope this helps

• What should I do to read pdf and jpeg files?

  What should I do to read pdf and jpeg files? I used to be able to see these files, but now I can't! all the ideas will help. Thank you

  JPEG files will open with Windows Picture and Fax Viewer.

  PDF files will open wit a PDF as Adobe or Foxit Reader.

  1. If they are attached, download and save one on the desktop.
  2. right click on the saved file.
  3. Select: Open with on the shortcut menu.
  4. click on: choose [default] program.
  5. Select the appropriate program.
  6. check: always use the selected program to open this type of file.
  7. click on OK.

  This should allow you to open these attachments directly from email address now.

  Adobe Reader
  http://get.Adobe.com/reader/

  Foxit Reader
  http://www.foxitsoftware.com/PDF/reader/

  Adobe is more "well known", but Foxit is much lighter and my personal preference.