Quadro K2000 mercury hardware Acclerated encoding

Similar Questions

• Reading Mercury and Quadro K2000 engine?

  I use Premiere Pro CS6 and have the graphic card Nvidia Quadro K2000.

  The section "video rendering and reading" project settings is gray, not allowing me to access the mercury playback engine at all.

  Anyone know how I can use the acceleration of mercury with this card?

  Much appreciated!

  If your nVidia card at least 1Gig of video ram, use the nVidia Hack http://forums.adobe.com/thread/629557 - which is a simple entry in a file "supported cards.

• Quadro K2000: Acceleration GPU LR 6

  In Lightroom GPU acceleration doesn't seem to work with my nvidia Quadro K2000 despite the installation of the driver the most recent and updated Lightroom 6.6.1. What is the problem here? GPU Quadro K2200 supports Lightroom (it is even announced by nvidia to work fine with Lightroom), and the K2000 is not an old model... but I have not found on the question of whether this card is supported.

  My system features:
  Windows 7 64 bit
  Intel i7 860 2, 8 GHz
  12 GB OF RAM
  6 of Lightroom

  excerpt from "Help-> System Info" inside LR6:

  Check the supported OpenGL: failed

  Provider: NVIDIA Corporation

  Version: 3.3.0 NVIDIA 364.72

  Renderer: Quadro PCIe/K2000/SSE2

  LanguageVersion: 3,30 NVIDIA via the Cg compiler

  This card meets the requirement of the open GL 3.3?

  I'm no expert on GPU, but I can tell you that I have no problem using the GPU in Lightroom with the K2000 Quadro on my Windows 7 computer.

  It seems that you don't have the latest driver installed.

  If you go to the NVIDIA website, you will see that the latest version is 368.86 - you 364.72.

  This is my system info:

  Graphic processor News:

  Quadro PCIe/K2000/SSE2

  Check the supported OpenGL: past

  Provider: NVIDIA Corporation

  Version: 3.3.0 NVIDIA 368.39

  Renderer: Quadro PCIe/K2000/SSE2

  LanguageVersion: 3,30 NVIDIA via the Cg compiler

• How to enable Cuda with a k2000 quadro in first cs6

  Hello, my QUADRO K2000 (Certified version) driver is up to date, but I can ' t select CUDA in PP CS6 project settings.

  In the control panel nvidia, cuda is enabled.

  I don't understand... help!

  HP Z 420 workstation, nvidia quadro K2000, 8 GB of Ram...

  The card is not supported by CS6.

  You need to run the 'Hack' which means open

  C:\Program Files\Adobe\Adobe first Pro CS6\cuda_supported_cards.txt and delete this txt file.

  If you are not comfortable by removing the file save it somewhere else.

• PP 2015.3 no CUDA mercury?

  Just installed PP 2015.3 PP 2015.2 alongside.

  2015.2 a mercury hardware support available. This option is missing in 2015.3.

  I use a card NVidia Quadro FX 3800, it obvously works with 2015.2. How to activate it with 2015.3?

  Hi eric, fish,

  Please refer to this thread: CC2015.3 - can't see my video card Quadro FX 3800...

  Thank you

  Regalo

• Dell U2413/U2713H (or maybe Windows 8) issue of color management

  Hello guys!

  I am an excessive user of Photoshop / graphic designer and I just bought Dell U2413 to obtain, in combination with my graphics card Nvidia Quadro K2000, a true wide range/10-bit working environment of color which is very important for what I do. (Nec or Eizo was not an option because I've already spent so much money on other materials and I opted for Dell because I heard it is the best display in this price range - in my country, with taxes, it cost me 566 EUROS).

  Previously, I was working on iMac for almost a decade then separate pieces of hardware or Windows operating system was a new (and, I must admit, pretty scary) territory for me. However, after everything has been put in place, I tried to calibrate my monitor for the first time and then I was very unpleasantly surprised! Namely, I have X-Rite i1 Display colorimeter Pro and some optional software for it (ColorEyes display Pro and baslCColor display 5 was much better/appropriate for me because of their L * option for TRC so I never used it original i 1 Profiler is a software which is a LOT less than the previous two compering), but because Dell in it's manual said to use a calibration color UltraSharp Solution software is exclusively I decided to give it a go and try with it. But, to my (as I already said, very unpleasant!) surprise, I was EVEN less of i1 Profiler which, as I have said, was never an option for me.

  Not the end of the world, I thought, I'll re - calibrate it with ColorEyes Display Pro and everything goes well. But, after doing so, my unpleasant surprise become even more unpleasant, when I discovered that no matter what profile I chose in Windows Color Management and press "Set as default", nothing happens - my screen remains the same! The only way I can get a color change is if I create a profile using Windows built in utility. Profiles created in this way change the appearance of the screen, but all the profiles downloaded or created make no difference. And now I literally don't know what to do... The worst thing only of this, I can't blame WHO:

  1 Dell - that has a 'high end' view gives you ONLY a few factory presets + 2 custom profiles (Cal1 and Cal2) made by software calibration nowdays more inferior and useless;
  2. Windows 8 - who did a terrible color management which, in the same way, not a color at all management;
  3. me - who is unable to see put in place something that is more than simple & obvious?

  THANKS in ADVANCE for everyone is willing to help me solve this question and forgive me for a long (and perhaps confusing-) as you can say English is not my language kindergarten post!

  First of all if you use the eyes color pro with GBLED and i1DisplayPro and you're not invited to a sort of spectral correction for your type of backlight screen, you're hurting. No matter how visually pleasant it is, the profile is not accurate, playing WYSIWYB (what you see is what you believe) not WYSIWYG.
  Second, unless you have purchased/updated Basiccolor Display 5 after may 2013 (NEC GB LED suppor for PA242W, 5.1.2 version) with GBLED and i1DisplayPro, its measures are wrong, no matter how nice of calibration is.

  With your questions:
  You have 6 presets:
  -CAL1/CAL2, please read questions configuration on the Dell color calibration Solution in this instance. Please install the latest version 1.0.1.0 (67MB) and disable all color adjustments in yor GPU nvidia (bright colors, digital vibrance... all OFF). Most of us use in Windows 7 without problem (after a few configuration settings: spectal correction for GBLED files)
  http://en.community.Dell.com/support-forums/peripherals/f/3529/t/19512342.aspx
  http://en.community.Dell.com/support-forums/peripherals/f/3529/t/19517601.aspx
  etc.
  -Factory-sRGB/AdobeRGB which are probably with a white point off the coast of the D65, recalibrate in GPU LUT with ArgyllCMS/DisplayCal. Works very well.
  -Standard with a usually arround WP 7000 K (native GBLED WP), if calibrated in GPU LUT with ArgyllCMS/DisplayCal ' nearest the locus of the daylight "of your native WP should give about your contrast of 1000: 1. It is perhaps unnecessary to your workflow, but it is better to know it.
  -Custom, native, fully customizable range WhitePoint, blackpopint and luminance of D50 D70 and beyond.
  Work with color management applications just you Custom, CAL1 and CAL2.

  You may have a problem with Windows (from Windows Vista from) color management. By default, Windows does not allow profiles (but applications can) rewriting GPU LUT of calibration. You need to configure.
  In W8, it's done:
  -From the right panel-> Search-> color management
  -Go to the tab advanced options
  -Click on "change default settings...". ', the button down with administrator privileges.
  -Go to the tab advanced options in this new window
  -Toogle check buton (bottom) "windows use on screen calibration" (sorry I don't have an English version of Windows and I don't know the exact text)
  -Reload button calibrations (bottom)
  -Close
  -Go to the "Devices" tab and select your screen in the upper drop-down list
  -check the box "use my record for this device".
  -Select your profile

  Your screen SHOULD be the same printer Dell preset OSD in which this profile was created, without other changes in contrast or brightness.
  If enabled, please disable the "AUTO" mode in the Dell Display Manager tray icon, use the manual mode with "enhanced video" (last tab) OFF.

  BTW and I know that this is not your case, but without workflow 10bits or gamma in 3DLUT (NECs & eizos) L * gamma calibration is not necessary.

  For those who have worn with 8-bit or DA better sRGB gamma CRT and let Photoshop or GIMP color management to make corrections for images ECIv2 (or with similar profiles of gamma)

• First Pro CC 2015.3 error Stop Driver NVIDIA

  Hello, after the upgrade to Premiere Pro 2015.3 of CC, any project that is with CUDA enabled video player.

  I open the project and load all the content, the NVIDIA driver for the works and the 'Program' my workspace screen is all black with only audio. If I change my project to work with the software invez CUDA, he returns to work, put in CUDA I very quickly in my tasks.

  How can I solve this problem?

  I tried everything, reinstall the driver, I did tests with 3DMark to see if it was not the video card. All right.

  In Adobe Media Encoder, CUDA works perfectly, just in the first of this error.

  Recognizing;

  Amauri

  FOR INFO.  I always use the older drivers, v331.82 on dual Quadro K2000, Ultra key/Fx to 2015.3 works without problem.

• Newb question: serious distortion of color

  I hope I'm missing something really stupid here. I am completely new to the creation and video editing as a whole.

  I set up a little video for a kick. I set up the fine video and exported, and it seems good. I've played a bit with many export different presets and they all looked good. I ended up going with a preset for iPhone that created the smaller file. This version is here: https://strangematter.us/Kickstarter_5.mp4.

  Then, I discovered that Kickstarter requires format 640 x 480, and I used a large screen. Oh no! So, I'll be back in the first, create a new sequence at 640 x 480, copy on all of my pieces, laboriously move all the items, and then export.

  I noticed that when I created my new sequence when I clicked in most frames on the timeline, the preview could be really garbled with vertical bands of color. But when I rubbed the playhead backward and forward it looked OK.

  However, exports have been garbage. Vertical bands of color everywhere and the audio was all choppy. I tried a bunch of different presets and all gave the same result.

  Even stranger: the original sequence shows the same problem now!

  So after some thought, I decided to cut the first of the equation. I have a good export, why not simply re-encode the low-resolution letterbox-style? So, I open encoder media and do exactly that, using the video perfectly well above. THE SAME PROBLEM. Here is this version: https://strangematter.us/Kickstarter_5_2.mp4.

  At this point, I am at a loss. What could I have done to be first or Media Encoder to behave the same way? (I would say it was purely a problem of Media Encoder, if not for the fact I see this distortion in the preview area in the first.)

  It is with first Pro CC, last update, on a Macbook Pro 2014.

  Any help would be appreciated!

  Problem solved.

  It seems that the switched converter at a time given "mercury hardware accelerated (CUDA)" "mercury hardware accelerated (OpenCL). Since they mean 'hardware acceleration' I do not think that there is a significant difference.

  There are of course! I turned it to CUDA and everything works well again!

• What software to a workstation HP Z230 would you recommend?

  I just bought a new Hewlett Packard Z230 Workstation with the intent to catch up on a big backlog (of the hundreds of hours) of family videos, I want to clean up and change.  This computer is configured as follows:

  Intel I7 4770 Quad Core 3.4 GHz (showing 8 processors in control panel/system/processor) current execution

  16 GB of ram

  C: drive of 256 GB SSD

  3 to 7 200 RPM drive D:

  video card nVidia Quadro K2000 with 2 GB of video ram

  Windows 7 Pro 64-bit

  When I bought this, I had planned on using Cyberlink PowerDirector because they announced that it works well with the features of this computer.  I downloaded a trial version of Power Director, and it satisfied my functional needs.  But he locked up three times in an hour.  When I wrote Cyberlink, they have asked for information like the DxDiag.txt file that describes my computer and blocks Windows event logs.  Their response was BAFFLING, because they said that they design their software to "level of consumer platforms", and since they test their software on "workstations", they may not recommend my use on the Z230.

  That said, I'm now looking for other software.  I used Pinnacle a lot in the past, but it has changed so much since the version I used, I'm not married to any brand at this stage.  In addition to the usual editing capability, I want to check that the software that I buy has specific abilities, I need:

  -Ability to video clips of cultures and expand others cropped 16:9 scene (because I have a few incroachment in video excerpts from the hood of the lens of a camera).

  -Ability to normalize audio levels of the different clips (some too loud or too quiet) before producing the video.

  -You want, don't not required: ability to burn DVDs or DVD on a computer other than the one where I'm editing.

  More, if not all, editing software has these capabilities now (PowerDirector and Pinnacle do), so this shouldn't be a problem, but I just want to check.

  Any help or advice would be appreciated.

  Thank you

  Terry Quinn

  Terry,

  Sounds like a ton of frustration!

  My comments:

  • You say you have hundreds hours of videos of family; you need a professional level solution, or you will simply be driven crazy!
  • I suggest to buy Premiere Pro CS6 (expensive but permanent license) or the first Pro CC rental (monthly subscription model). These two fully use your hardware (processor, memory, GPU and whole disks) for the best possible, editing experience - I highly recommend to choose one of the two options and do not look back. With many hours of video, you want to have a platform which publishes fine without having to make each scenario over and over again just for reading and gently rub.

    [sidebar: I do not work for Adobe, I don't do that professionally and I made photo and video editing as a consumer for more than 30 years well.] Announcement over these years, I had the chance to try a lot of different hardware and software solutions (well Yes, Panasonic / Sony bridge-to-bridge linear edition on hardware Hi8, VHS, SVHS, then Pinnacle and assisted Matrox solutions PC (signs $ 1000 added to the PC to handle DV and SD non-linear editing formats) [and for the last decade, using Pinnacle Avid Liquid / / first / only Vegas software solutions])

  • Your system is pretty solid, except for the video card (empty the Quadro and get a 2 GB card NVidia GTX 770). Add a matching 3 TB HD and make a record of 2 x RAID 0 set would give you much more speed and ability too in the field of training and is an upgrade I would propose as well. You don't have a lot of video indeed!

  You absolutely must talk about what your media here to get the best advice.  Are you using editing AVCHD, DV, Hi8, etc. ? It is very important to determine the level of the CPU, GPU and drive speed that best fits your need. Not all video is similar and consumer HD (AVCHD) is radically more taxing on a PC than mini-DV, for example. Since you say that you have hundreds of hours of video, I guess you aren't in 4 k yet!

  Kind regards

  Jim

• SOUL vs Direct Export in first CS5 - bad quality export flash

  Hello

  I recently met some discrepancies of quality strange export to FLV with SOUL and the direct export of first CS5. Material of origin was DV PAL (4:3). Export the flash settings are 430 x 314, 25 fps, 2000MiB/s, Codec: On2VP6. Hardware acclerated MPE.

  Export with the SOUL led to strong pixelated text animations (made with the title tool). Direct export had a lot of best quality results. The exports were made with the same settings.

  D I would like to know if anyone has similar kind problems when encoding with the AME or have some suggestions, how this quality gap could happen?

  Thanks for your comments.

  In this case, you are probably looking for the difference between the hardware acceleration (direct) and is not accelerated (SOUL).  The first has higher scaling algorithms.

• Make line always yellow poster after rendering

  I am running CS5 PP (version 5.0.2) on Win7 x 64 with a Nvidia Quadro 4000 (Mercury certified Playback).  My complete sequence first displays a yellow line rendered.  If I turn in the work area (via the key entry, with a maximum bit depth and made selected quality), it still shows yellow.  I'm a noob, but if it should not see Green?  My old system did not support the mercury, so that the rendered line red poster until I made a party, who would then green again.  I have GPU enabled under video acceleration and reading.

  Scaling, fusion and effects active CUDA use MPE material, the rest is done by software. So, no, you don't win anything of use rendered preview files. All the de - / encoding is performed by the CPU.

• HP xw6600: How does your match at Passmark Software HP workstation?

  [url = http://www.passmark.com/baselines/V9/display.php?id=67168262348] [img] http://www.passmark.com/baselines/V9/images/67168262348.png [line] [url]

  

  Anthony K.

  While some video editing - Adobe Prieimere 2014 and programs such as After Effects can benfit of multiple cores, in many cases, the efeiciency pic is still 5-6 carrots. A Xeon E5 system would be the best a first version can burn out a 8-core, has a SATAIII and USB 3 controller.

  It is surprisingly affordable with a little shopping of vigilance.

  Examine the value of the sales of your HP xw6600 and adding the alowance upgrade.  the maximum price for a HP xw6600 complete is about $ 350, but if your sysrtem of a median of about $250 and $250, another was avaialable there are plenty of options, including a z420 with a 4-core E5-1620 (3.6 3.8 GHz) >sold for $250.  The K2000 is that the particular system is a great GPU for your use. That system would be as there is quite a bit faster than your current system and have a Xeon E5 LGA2011, for only $70-80 which could become an E5-2670 8 - core @ 2.6 3.3 GHz.   Over time, the remaining budget could add a good SSD 250 GB as a Samsung 850 Evo - $80 and a WD Blue ITB - very good show $50.

  In my opinion, this approach - even if it meant a z420 buying and waiting for upgrade is a better tactic in the long term than the upgrade of the xw6600.

  The highest appreciation xw6600 183 tested:

  Rating: 2609

  CPU: 8101

  2D: 482 (Radeon HD 6870)

  3D: 2765

  MEM: 826 (16GB)

  Disc: 5115 "Volume 0" - a RAID 0 disk unknown

  In comparison, there are 21 z420/E5-1620 / Quadro K2000 on the PassMark, top rated systems are:

  Assessment: 3798

  CPU: 9253

  2D: 820

  3D: 1658

  MEM: 1973 (8GB)

  Disc: 4491 (Crucial MX100 512GB)

  So a specification very moderate, $250 is already very well against the best xw6600 z420.

  Condidering what the cost of the Radeon HD 6870 and MX110 Crucial is the same added to any system, the cost / performance is best when added to the z420 and future potential with regard to a 8-core processor makes the future z420 much more and with a good best resale back when buying the nest system.

  See you soon,.

  BambiBoom

• Z420 doent start with GeForce GTX650

  We bought some new workstations HP Z420 on chipset Intel C602 with Intel Xeon-E1603 w/o video.

  For them, we bought part of them with Nvidia Quadro K2000 and Nvidia GeForce GTX 650.

  Z420 begins with quadro, unlike us installation GTX 650 system starts beeping 6 short beeps and no.

  How can I start Z420 GeForce?   For example, there are certain configurations on Z420 with GeForce - http://dv411.com/hpz420.html

  Problem solved by the method:

  Settinggs in the BIOS has been changed

  BIOS - “ Security ”

  “ Legacy Support ” = “ Activated ”

  (game of prevoisly "Secure Boot'='Disabled" ' ").

• WinFast tv 2000 xp driver problem

  I havea a tv tuner leadtek winfast tv 2000 xp and I can not end anywhere the drivers for this device... I'm on the computer windows 7 ultimate 64 bit edition... I downloaded the drivers from the official site http://leadtek.com, but this driver does not work... I send a mail to the servive cuestemors and I can answer that not all the drivers for this device... especialy on a 64-bit edition what can I do? plase answer... Thank you

  The Winfast TV2000XP is an analog card without hardware MPEG Encoder so does not work with Windows Media Center.

  Withthe drivers of http://www.leadtek.com/eng/support/download.asp?downlineid=190&downline=WinFast+TV2000XP+Global it should work with the Leadtek WinFast PVR2 2.0.3.28 application.

• update graphics 8570w

  Hi all:

  I have a 8570w here.

  It came with a nvidia Quadro K1000M graphics card

  can I switch to Quadro K2000?

  Thank you

  Aldo

  It can be upgraded to the K2000M, but your system has a white list of BIOS, which means that you would have to buy the upgrade from HP.

  Source: http://forum.notebookreview.com/hp-business-class-notebooks/718702-hp-elitebook-8570w-gpu-upgrade-options.html