Reads OCR training character, but not the program labview

Similar Questions

• HP DVD Writer does not read or write DVD, but only the CD

  My HP DVD 1135t burner does not read or write DVD but only the CD. What is the problem? Please help me.

  CD/DVD players use different lasers for reading/writing DVD from the CD.  All indications would point to your laser DVD as having failed.  You could try to remove your drive and install it in another computer to see if the problem follows your player or your computer, but my bet is that the drive must be replaced.

  HTH,
  JW

• I had the literoom last Sunday. but did not the program. When I start this program. "Please disconnect in the menu help reconnect you, and then click license of this software.

  I had the literoom last Sunday. but did not the program. When I start this program. "Please disconnect in the menu help reconnect you, and then click this software license" How can I do?

  Hello

  I see that you bought the subscription of photography and it seems it is stuck in the sign in a loop.

  Please try out the following links

  Solutions to connection errors, activation and connection with creative Cloud applications and Creative Suite

  Solve the common activation Adobe Creative Cloud (login) and questions (disconnect) disabling or error messages

  Troubleshooting of Activation creative cloud (solved 99% of the questions)

• After installed LR6, I firstly the Programm. Its audit of my ID. But then the program does not accept the button: Seriennummer prufen with a new window: no internet connection. But the connection is OK.

  After installed LR6, I firstly the Programm. Its audit of my ID. But then the program does not accept the button: Seriennummer prufen with a new window: no internet connection. But the connection is OK. So I can't start the program.

  Hello Siegmud,

  Wende Dich wie oben und some showers a cat den, denn

  Problembehebung für die Aktivierung und Deaktivierung > Stellen Sie sicher, dass eine zum includes Internet connection > werden (auch) displaying Fehler, wenn Ihr Computer nicht mit dem Internet ist clear (breast kann, dass) oder wenn er nicht vom Aktivierungsserver erkannt wird. Wenn are sich um einen Fehler im accordingly mit dem Aktivierungsserver all, set Sie sich mit each in connection. Halten Sie your Seriennummer bzw. Adobe-ID bereit.

  Hans-Günter

• Some, but not all, programs in CS6 Master Collection is more open, inviting the Adobe Application Manager

  Here's my problem. I bought the CS 6 Master Collection when it came out. Everything was fine until recent months when some, but not all, programs won't open. When I run CS 6 Illustrator, Creative Cloud Adobe Application Manager opens. To renew your subscription? When I Subscription Manager, I said I have a free subscription to creative cloud. Agents chat Adobe told me that my creative cloud subscription is good.

  What is strange, but I thank you, is that other programs, such as Photoshop CS6 and Dreamweaver CS6, open very well, without the detour over the impasse of Adobe Application Manager.

  Through four chat sessions, I have been ordered to take various measures, which none have worked. The fuller was an uninstall of all Master CS6 Collection, run a cleaning of Adobe tool, then a reinstallation is complete. It took a while, but left me at the same place: Adobe Application Manager opens for 6, Illustrator CS, but CS 6 Dreamweaver and Photoshop 6 CS open very well.

  After several tries, I somewhat lost a little confidence in agents chat for Adobe. Does anyone have a solution for this?

  Hello

  I checked with your Adobe ID here on the forums, there was a creative cloud subscription that is now closed there ended in August 2014.

  Uninstalling CS6 will not help you will need to remove the Creative cloud completely from your machine first.

  After that reinstall CS6 from - applications download Creative Suite 6

  Please follow the steps; below

  MAC:

  1 force quit Adobe all processes in the activity monitor (for example, CC, Core sync, the broker CC library, Office, Adobe, Adobe CPI, demon Adobe Crash etc..)

  2-go to: Finder > Applications > utilities > Adobe installer > uninstall Adobe Creative cloud (if problems uninstall Trash)

  3-go to: Finder > Applications > utilities > (delete these two folders - creative cloud Adobe and Adobe Application Manager)

  4. then run the cleanup tool to remove the clouds creative and Adobe Application Manager (if it remains in the machine)

  5 right-click on the icon in the Finder, then select 'Go - To' folder.

  6. you will get a text box, type in the following command and then press 'return '. ("Not to be missed ~ symbol")

  ~/Library (it will open the folder of the user's library.)

  7. browse to the Application Support > Adobe > OOBE folder and folder AAM Updater so trash

  8. new > right-click on the icon in the Finder and select "go to" folder option. > you will get a text box, type in the following command, and then click 'Return' key. / Library (it will open the library system folder.)

  9. browse to the Application Support > Adobe > trash folder OOBE and Adobe Application Manager / after that, rename the SL-STORE like SL-STORE_OLD

  Adobe 10 - run cleanup tool. > If so, select "Adobe Application Manager for Mac OS X 10.6 ' and then click on"Clean up selected. "

  http://download.Macromedia.com/SupportTools/cleaner/Mac/AdobeCreativeCloudCleanerTool.dmg

  11 - click on the link below and download Creative Cloud Installer file and use them to install the creative Cloud Desktop application.

  https://ccmdls.Adobe.com/AdobeProducts/KCCC/1/OSX10/CreativeCloudInstaller.dmg

  WINDOW:

  (1) uninstall Creative Cloud Desktop Manager:

  Using creative cloud | Uninstall the creative cloud desktop application

  (2) remove the rest of the files:

  C:\Program Files (x 86) \Common Files\Adobe\OOBE

  C:\Program Files (x 86) \Common Files\Adobe\Adobe Application Manager

  C:\Program Files (x 86) \Adobe\Creative Cloud files

  C:\Users\\AppData\Local\Adobe\ MAA UPDATER and OOBE times

  \Adobe\ DONNÉES C:\Program rename SL-STORE like SL-STORE_OLD

  Cleaning tool 3 - run Adobe: http://download.macromedia.com/SupportTools/Cleaner/win/AdobeCreativeCloudCleanerTool.exe

  4 - Click on the link below and download Creative Cloud Installer file and use them to install the creative Cloud Desktop application.

  Download Adobe Creative cloud apps | Free trial of Adobe CC

  Let us know if that helps.

  Kind regards

  Bani

• Hi, I installed the creative cloud, but when I download Lightroom CC, the browser indicates that the program is downloaded, creative cloud appears, but overall the program is just a black screen, I do not see what I am downloading or the status of downlo

  Hi, I installed the creative cloud, but when I download Lightroom CC, the browser indicates that the program is downloaded, creative cloud appears but overall the program is just a black screen, I do not see what I am downloading or the status of the download, I use a pc

  You must install Ligjhtroom cc app to app Adobe Creative Cloud.

  See the link below:

  https://helpx.Adobe.com/creative-cloud/KB/black-screen-sign-in-creative-cloud.html

• Wizard BootCamp 6.0.1 running on El Capitan 10.11.5 installs single partition BootCamp on the disc Fusion consisting of 128 SSD part G SSD and 3 TB of HARD drive on an iMac (retina 5K, 27 inches, end of 2014), but not the part of the HARD drive?

  How is it assistant BootCamp 6.0.1 running on El Capitan 10.11.5 installs single partition BootCamp on the disc Fusion consisting of 128 SSD part G SSD and 3 TB of HARD drive on an iMac (retina 5K, 27 inches, end of 2014), but not the part of the HARD drive?

  This has two questions:

  1 capacity of SSDS faster for Fusion drive has been reduced. Therefore less effective for the reader of the merger. For example if I need to create a partition of 80G for my windows bootcamp partition, only 48 G will be left in the drive of the merger.

  2. ability of the bootcamp windows partition becomes very limited, cannot be greater than 120 G.

  3. even when I try to fuse out of the drive of fusion in the 128 G SSD and 3 TB of HARD disk, and then run the BootCamp assistant to create the bootcamp partition start from scratch to reinstall El Capitan only on the HARD drive (without drive Fusion), it won't let me do anything, it just shows an error that says something like "a person has created additional partitions on this drive please select. another disc. But there is nothing else to choose.

  Before my (5 K, 27 inches, end of 2014 retina) to El Capitan Yosemite, I was able to use the previous version of the wizard BootCamp 5.x to create the partition, bootcamp on the drive of the merger. And it will be divided in the fuser unit in two and insert the Bootcamp partition (with the size I chose, which can go up to 1 TB) between two partitions of MAC OSX.

  The disk partitions resulting from it, will be the partition MAC OS x on the SSD, the partition MAC OS x on the HARD drive partition #1, partition MAC OS x on the HARD drive partition #3.

  Then there is the BootCamp partition on the HARD drive partition #2.

  Is there a way to get what I need?

  That is what has been described in this notice of two canoes?

  Installation of Windows on a Boot Camp partition on a drive of TB Fusion 3

  n-on-a-3-TB-fusion-drive http://twocanoes.com/Winclone/support/installing-Windows-on-a-Boot-Camp-partitio

  Thank you.

  After having worked on those weeks, I realized that I need very painfully (by first going back to Yosemite and bootcamp 5 to escape all the limitations of El Capitan and BootCamp 6) I want to share here. Someone at - it other smarter solutions welcome.

  Note these steps and mentioned drivers only work for my version of iMAC, retina 5K late 2014. If you have other material, please search on the web to see which driver will work first. And all of these steps are destructive and assumed that you first take backup. It is only shared for interest only. Readers will have to bear your own risk.

  A. take backup

  1. take a backup completes my iMac Fusion Drive using Time Machine. Then restart with a Yosemite USB installation and select Terminal from the menu on the top bar.

  B. fuse out of the merger in two physical disks drive: SSD + HDD

  1. in the terminal, type the commands in show what the logical volume group ID and the ID of the logical Volume of the disc fusion)

  Cs diskutil list

  2. in the terminal, type commands for the fuse of the fuser unit and separate them to an SSD and a HARD drive.  Note: All data will be destroyed in the drive of the merger. There are many articles in this community on how this could be done,

  diskutil cs deleteVolume Logical Volume ID

  CS diskutil remove logical Volume Group ID

  This should finish within 30 minutes. If you have taken more time, this means that your reader of fusion has been altered somehow.

  I hit this issue too.  To use this command to remove the fusion drive hung up, and I need to do the hard to scramble a few sections of data in the hard disk partition table using the controls to tell the OSX this hard drive is a new without partitions:

  Cat >/dev/random /dev/disk0 (where/dev/disk0 is the SSD)

  and repeat for disk1/dev/disk1 which is the HARD drive in my case).

  This command will not return anything, but expect to press Ctrl-Z to end after 1 minute.

  2 create independent partitions (non-fusionend) for the installation of OSX.

  Borne Terminal output, and select disk utility, in disk utility, select the drive to HARD disk (and not on the partition), you will see the error message and you will be asked if you want to fix the fuser unit, click on ignore. Then wipe the HARD drive to create a single 'extended OSX journaled"named"HARD drive".

  3. Repeat step 2, and then erase the SSD drive to create a single 'extended OSX journaled"named"SSD ".

  C. install on the HARD disk as drive didier autonomous not fusion.

  1. go to Yosemite install screen and proceed with the installation of a clean copy of Yosemite to the iMAC. then connect you.

  D. use BootCamp Yosemite f5 to install windows.

  1. launch Yosemite bootcamp.

  2. check the two checkboxes for creating the USB drive to install windows 7 or a later version, and to download the windows supports the Apple software.  Do not click on the last box to install or remove windows pie creating real bootcamp partition again.

  3. it may take several hours to complete this function of your internet b/w and also performance of your USB drive.

  4. If you install Windows 7 (like me), then the downloaded drivers will not work for you, this will cause the issue of the device driver appleDSS.sys does not like this driver and others are too recent for windows 7 to use.  Also, your keyboard and mouse may not work even if you try to plug in a USB external keyboard or a mouse. You need to replace the drivers downloaded by others (the Boot Camp 5.1.5769 drivers that I find in this link: Software Support of Boot Camp 5.1.5769.) (Note: this driver is material specific only works for my iMAC model).  Once you have downloaded it, copy the two files in the root directory of the USB installation to replace the original ones. It's specific and material available for download somewhere on the Apple Site.

  -From the Finder, delete the $WinPE$ and the Boot Camp of the FLASH PLAYER files.

  -Expand the old drivers for Boot Camp 5.1.5769 (two records and another file) on your desktop.

  -Copy the $WinPE$ and records of Boot Camp in the FLASH PLAYER.

  5. open Boot Camp Assistant again and only select the third option, install Windows 7.

  It will show you the screen to select what installation disk, select HARD drive.

  Then drag the slide bar to select the size of the Bootcamp partition for windows you want, knowing that there is a restriction for windows installed using training camp on a MAC that the last byte of the BootCamp partition must reside in the first byte of the 2.2 T of each physical hard drive.

  For my case, I need only 500G for bootcamp and leaving behind 1.7 to for my MAC OSX partition immediately after the bootcamp partition and an another 0.8 T MAC OSX partition after him. 1.7 TB and the partition of MAC OS x 0.8 TB well exploited in the meantime bootcamp partition, will be merged into a fusion drive by Bootcamp. Thus, you will end up with total 2.5 TB of disk space in a logical drive - fuser.

  Go to this link for more details on this subject: n-on-a-3-tb-fusion-drive http://twocanoes.com/winclone/support/installing-windows-on-a-boot-camp-partitio

  6. continue the process to partition the hard drive, then it will restart automatically in windows installation mode, install windows.

  7. once the installation is complete, check that windows is functioning correctly.

  E. Si you want to upgrade to windows 10 Windows 7.

  1 if you plan to upgrade to windows 10, you'll find that the windows IE v.8 7 is no longer works and had many problems to load the page.  Then when you try to download the latest version of Internet Explorer, you get an error that you need at least windows 7 SP1 to support the last IE.  Life is too complicated, just download the google Chrome browser, then search for download windows 10 and then run the Microsoft valuation tool to upgrade.

  2 but before upgrade you, unplug all your MAC USB drives, otherwise, you will find that, after having spent an hour downloading the windows 10 software, the upgrade will fail with the error "/ dynamicupdate...» ». It is an inexplicable mistake that no one seems to understand why. There are articles with proven results that the removal of all USB drives before running the windows 10 upgrade tool will correct this problem.

  F. reinstall OSX El Capitan

  Once your target windows system (if windows 7, windows 8 or windows 10) works very well.  You can continue to create again your Fusion drive and reinstall OSX El Capitan.

  1. Insert the install of OSX Yosemite rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.

  2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.

  3. on the selection screen, select start Yosemite OSX install drive.

  4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.

  5. in the terminal, type the command 'diskutil list cs' and you should see nothing to prove that there are no existing fusion drive yet.

  6 type the 'diskutil list' command to list all disks and partitions.

  The SSD has two partitions, the/dev/disk0s1 of EFI (209 MB) partition and the other/dev/disk0s2 of OSX partition we created in step B above, called SSD around 121 G.

  The HARD drive has two partitions, the/dev/disk1s1 of EFI (209 MB) partition and the other/dev/disk1s2 of OSX partition we created in step B above, called SSD.

  G. delete the logical storage of nucleus on the HARD disk drive and it refuses with the DSS to form a merger with faster performance disc

  1. Insert the install of OSX El Capitan rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.

  2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.

  3. on the selection screen, select start Yosemite OSX install drive.

  4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.

  5. in the terminal, type orders for (to show what are the logical volume group ID and the ID of the logical Volume of the logical drive). You should see the logical volume to basic storage group created using two partitions on the hard drive, 1.7 TB and TB 0.8 created when we run the Yosemite Bootcamp to install windows.

  Cs diskutil list

  6. in the terminal, type commands to delete logical drives from basic storage.  Note: All data will be destroyed in the logical drive.

  diskutil cs deleteVolume Logical Volume ID

  CS diskutil remove logical Volume Group ID

  7. tap "diskutil list" command lists all the resulting partitions. You should see that the HARD drive has the following partitions.

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS GB SSD 121.0 disk0s2

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 3.0 to disk1

  1: EFI EFI 209.7 MB disk1s1

  2: Apple_HFS 1.7 Untitled TB disk1s2

  3: disk1s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft database BOOTCAMP 503.0 GB disk1s4

  5: Apple_HFS 801,4 Untitled GB disk1s5

  8 type the following commands to create the logical volumes group, named "myLVG" (or the name) of fuser using the usable for OSX to the SSD and HDD partitions.

  diskutil cs to create "myLVG" disk0s2 disk1s2 disk1s5

  Note: Mark the group id of logical volume shown in the results.

  In my case, I want to book the last partition as standalone partition disk1s5 no-fusionend, so I can use it to raise the back, or format it in FAT32 to allow the exchange of data between the MAC and boot camp.

  So, I do not understand this last partition in the drive of the merger. in my case, the command that I used is: diskutil cs to create "myLVG" disk0s2 disk1s2

  9 create logical volumes named "Macintosh HD" (or you call it) on the logical volume group we just created for the reader of the merger.

  diskutil createvolume logical volume group ID jhfs cs + 'Macintosh HD' 100%

  10 command "diskutil cs type list" to check the resulting fusion drive created.

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group F53C7A25-C2F3-4997-91E9-2E6B6BAB2E0E

  =========================================================

  Name: LVG

  Status: online

  Dimensions: 1815635525632 B (1.8 to)

  Free space: 90112 B (90.1 KB)

  |

  +-Physical volume E176873C-7C80-4759-8110-BA7307E0C4B3

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 120988852224 B (121.0 GB)

  |

  +-Physical volume 6535AC3C-DCF8-453F-AD47-98905538386E

  |   ----------------------------------------------------

  |   Index: 1

  |   Disc: disk1s2

  |   Status: online

  |   Dimensions: 1694646673408 B (1.7 to)

  |

  +--> Logical volume family F3D15F87-FB84-4B43-B2F2-E9EACC7C42D9

  ----------------------------------------------------------

  Encryption type: no

  |

  +--> Logical volume 0D807F6E-FB7C-418F-AAF4-EF3EA3525D10

  ---------------------------------------------------

  Disc: disk2

  Status: online

  Size (Total): 1809780178944 B (1.8 to)

  Reversible: no

  Name: Macintosh HD

  Volume name: Macintosh HD

  Content indicator: Apple_HFS

  LVG Type: Fusion, sparse

  11 exit the terminal, go back to OSX El Capitan install screen and select the name of the fuser unit 'Macintosh HD' proceed to begin the installation of the os x for installation.

  12. There will be a step in the installation ask you if you want to configure as a new computer, or restore from a time machine previous backup. Make your own choices it accordingly.

  13 once OSX El Capitan has been installed and you have finished restoring the data and custom configurations, you can enter the application of preferences to check if you see the icon of the "Startup" disk", and if you choose Startup BootCamp in the next reboot, you should be able to boot up to Windows without pressing and holding the button option when reboot and choose to start windows manually. Also, in windows, you should be able to click on the bootcamp Control Panel and select for a startup to OSX on the next reboot.

  14. one thing to be aware, if you install bootcamp in this way, the boot camp and the GUI utility disk in OSX El Capitan will not be able to adjust your settings. This means, if you need to touch anything or to readjust the size of the partition, you will need to do it again in step A. Alternatively, some how to get started with installing Mac OSX Yosemite USB, then adjust the partitions using similar commands shown in this article or other articles in this community.

  15. yet once please take personal responsibility on damage if you follow the instructions in this article.

• How to create a custom control for a button where the look apply to everyone else but not the Boolean text?

  Hi all

  I would like to create a button custom as a master, so that if I change the look of the master all other buttons are changed.

  I did it with a custom control, such as a 'type strict def' otherwise the look will change , BUT if I do this as a strict type def I can't change the Boolean text more which should be different on each button.

  How to create a master control of a button where the look apply to everyone else but not the Boolean text?

  Steve Chandler wrote:

  I don't think that you can do. I just looked and as I suspected the Boolean property text is read only for strict typedefs, you cannot use the nodes property to change the text.

  As a just solution make it a typedef. When you want to change the open look the typedef and strict rendering, make your changes, then make no strict again. You will need to update the text Boolean yet once for all instances. Kind of pain. This is perhaps something for the exchange of ideas.

  Alternatively, remove Boolean text and replace with legend

• I backed up my files and then did a reinstall. Watch winmail.fol backup but not the eml files. Is there a way to retrieve my emails via the winmail.fol files?

  I backed up my files and then did a reinstall. Watch winmail.fol backup but not the eml files. Is there a way to retrieve my emails via the winmail.fol files?

  Hello

  ·          What program did you use to back up files?

  Here are two ways to restore the saved messages:

  Step 1: Before you start Windows Mail, copy the folder saved in C:\Users\username\AppData\Local\Microsoft\Windows mail storage folder.

  Step 2: Start Windows Mail and import messages in the backup storage folder.

  http://Windows.Microsoft.com/en-us/Windows-Vista/import-messages-to-Windows-mail-from-other-e-mail-programs

• I can create it but not the NAME of a new folder... any suggestions? Vista SP2 Marty

  I can create it but not the NAME of a new folder... any suggestions?  Or as the administrator or user, even when the user is an administrator.  GACK!  This is new behavior, week or two...  Vista SP2 Marty

  Hi Marty_McGrath,
   
  I suggest that you want to run the file system (CFS) Checker scan that might help you to solve the issue.
  To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the box start the search.
  2. right click on cmd in the list programs and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue
  3. at the command prompt, the following line, and then press ENTER:
  sfc/scannow

  When the analysis is complete, test to see if the problem you are experiencing is resolved. If the problem you are experiencing is not resolved, use the procedure that is described in the section "the System Restore tool.

  Follow the instructions in the link below for more information on scan SFC.
  http://support.Microsoft.com/kb/936212/

  Check whether the problem is resolved.

  If this does not work, you can try to create the new user account by following the instructions in the link below and check if it works.

  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• I'm unable to access my computer (windows 8) with my microsoft account. The password works for the connection to outlook on the internet, but not the computer.

  Original title: connection problem

  I'm unable to access my computer (windows 8) with my microsoft account. The password works for the connection to outlook on the internet, but not the computer.

  The message I get when trying to connect is simply that I cannot connect you at this time and that I should follow a link to reset the password - what I've done without result. The computer is connected to the internet.

  Hello

  Thanks for posting your query on the Microsoft Community.

  With the publication of the description, I understand that you are unable to access your computer using Microsoft password account on the machine Windows 8. I will certainly help you get this problem.

  I would be grateful if you could help me with more information:

  1. Since when you are facing this problem?

  2. What is the exact error you receive by accessing the computer?

  I would say to you follow the suggestions provided by Cliff_N responded on 7 December 2012 in the below thread Microsoft:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-security/why-cant-i-sign-into-Windows-8-with-my-Microsoft/7662ea57-c321-4bfe-84e9-fc9ebb87a44b?TM=1355519512755#_self

  Important information: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Note: When updating, the applications you have installed Web sites and DVDS is deleted. The applications provided with your PC and applications that you have installed in the Windows store will be resettled. Windows puts a list of apps removed on your desktop after you refresh your PC.

  For more information, you can consult the Microsoft article.

  What to do if you forget your Windows password

  http://Windows.Microsoft.com/en-us/Windows/what-do-forget-Windows-password#1TC=Windows-8

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

• When searching in Windows 7, I get a list of headers group for items, but not the articles themselves

  Hello

  When I click on start and enter text in the search programs and files text box, the search returns only for the items returned, but not the articles themselves group headers. Can someone help me solve this problem?

  Thank you

  Christi

  You can get a fix taken care that addresses this problem and it should prevent from happening again in the future. To get it, point your browser to the following Web site:
  http://support.Microsoft.com/kb/977380
  Click then on "view and request the hotfix downloads" which is located just above the beginning of the knowledge base article.

  Hope this helps,

  Alexander Sklar
  Windows engineering - sustaining user experience / developer experience team
     http://blogs.msdn.com/Asklar

  This posting is provided "AS IS" without any warranty and not an entitlement.

• HP Photosmart 6510 series connects to the network and Internet, but not the computer.

  Hey all,.

  I have a desktop H8-1228 and 6510 e - printer.  I got both products at the same time.  I did the initial installation, and everything worked perfectly.  I was able to print of my HP Touchpad (the printer was on the floor and my Touchpad was down.).  Recently, I made a trip for two weeks.  I turned off the printer.  This seems to have been a mistake.  Now, he will only contact my network and Internet, but not the computer.  The Setup program keeps telling me that it is 'Impossible to find the printer' and that he wants me to check the IP address of the printer.  I did this many times by printing the HP's Configuration Page from the printer screen.  I also used Windows "Add a printer" without success.

  I have installed and uninstalled the software several times; every time that remove the icon of the printer and the Standard TCP/IP port in the "Devices and printers" section in Control Panel.  A few minutes earlier, I used Regedit to delete any reference to the series of HP Photosmart 6510 in the registry, believing that it could help my situation.  There can be no. :-(  I did the installation with the same problems that I had all the other times that I tried to install it.

  No help from you the printer experts will be greatly appreciated.  I'm not a novice as you can see.  This situation, however, launched my posterior. :-))

  Hi old_geekster,

  You may want to enable disable all startup programs in msconfig until you are able to access the Web integrated printer server. It seems that there is something in the communication with the printer's operating system blocking. It will most likely software firewall or security related.

  HP has designed a quick and easy tool that diagnoses and solves many problems of printing, scanning and connectivity: The HP Print and Scan doctor. HP recommend you to download and install Print and scan doctor no matter what time you need to solve a problem with your HP printer from the link below.

  I would like to know what are the errors you receive?

  http://www.HP.com/go/tools

• First, I installed the trial version, just moments after I decided to purchase the Lightroom program. Now, I already got the Bill but in the program is that the trial version runs in 27 days.

  First, I installed the trial version, just moments after I decided to purchase the Lightroom program. Now, I already got the Bill but in the program is that the trial version runs in 27 days. I already tried to close the session and register with the serial number, but it did not work. I don't want it runs in 27 days, as I have already bought and have my photos out there.

  Thanks for your help!

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• I have CS4 and changed computers.  He has not transferred and I want to know how to make so that it can be activated, I #but not the disk series. How do I do that?

  I have the CS4 and have changed computers.  He has not transferred and I wanted to know how have it activated. I have the serial number, but not the disk. How can I do this?

  install properly using the installation files.

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
  • Captivate: 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6.3| 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".