ReadyNAS 316 won't start (blocked on 'Boot... »)

Similar Questions

• Satellite A100: Windows won't start no-Unmountable Boot Volume

  My son has a Satellite A100 under Windows XP SP3. Windows is not going beyond the Windows logo screen and ends with a Unmoutable Boot Volume + message.

  After what has happened, the status of the disk in the BIOS password is + HDD password frozen +. Note that the HARD drive does not have a user defined password.

  What is happening here and how is it fixed?

  Can you start laptop in safe mode with F8?
  The HARD drive password is strange to me.

  In this situation what you can try is to start the repair console in the Windows XP installation disc and try to fix it. Problem is that Toshiba computers laptops come with recovery discs only.
  Try to get the installation of Microsoft WXP disc and try with this repair option.

• Satellite P200 - 17 c - Vista won't start up - how replace/repair boot.ini

  Hello

  I have a Toshiba P200 - 17 c of the vista computer and it won't start, freezes on the splash screen. I have
  used iso image to boot from and ran repair disk, makes no difference.
  Machine will not get beyond microsoft loading page (with yellowish scroll bar).

  My question is: How can I replace / repair the boot.ini file to get the machine to start or disable all applications / drivers for applications in order to get the machine to start.

  I have not (my fault) create a back up or restore disk.
  After booting the machine from cd, system repair running and try to run the system restore doesn't work...

  Can anyone advise on a way to replace/repair boot.ini or turn off the drivers?

  Try to avoid to pay another £30 pounds for a recovery disc that I already paid for the licensed software, don't know why.
  If you pay because you do not get a copy of Vista with machine...

  Anyway any help would be most appreciated.

  G

  Hello

  > How to replace / repair the boot.ini file to get the machine to start or disable all applications / drivers for applications in order to get the machine to start.
  I doubt that this could be done under Vista cannot modify the boot.ini as on Win XP OS.
  To edit the boot.ini file you must use the BCDEDIT command.
  However, I put t think it would start the Vista correctly.

  In my opinion you have two options;
  You can use the safe mode and might attempt to start the Vista slim or you have to reinstall the entire operating system yet.
  But I doubt you'll be able to start in safe mode if the system repair and system restore didn't work too.

  So in my opinion the last real solution could be the new facility.

  Concerning

• ReadyNAS 104 does not start. Out_of_memory error 354. After the upgrade to 6.4.1 #26323717

  6.4.1 installed from 6.2.5 yesterday. Everything went well. Did all the "computation". has worked well.

  No not from one day to the next with 354 out_of_memory error. now, does not start.

  I tried reinstallOS. No luck.

  totally stuck and he needs for businesses!

  You could try RO mode, see https://community.netgear.com/t5/Using-your-ReadyNAS/Readynas-104-won-t-boot-Error-354-out-of-memory...

• Qosmio G20 - won't start, error ATA #1

  I have a G20-102. Today I opened my flash drive and files all showed them as shortcuts. I tried to connect to Firefox 4 and a warning from AVG threat came pointing to C:\windows\system32\mssrv32.exe (Tr/Crypt.xpack.Gen3) as a Protection of identity. I opted for the "Move to vault" option and asked to restart

  Now my pc won't start - I get the Qosmio screen, ATA error #1 (CD player has been removed) and then the screen "rolls" - looks like random pixels flashing on the screen. I'm trying to start safe mode, but F5, F8 or any Fkey is not doing

  To make things worse, the CD rom has been removed, faulty, so I can't boot from another device. I don't have a USb in the BIOS, only FDD option which I did not

  Help, please

  Hey,.

  To me, it looks like a serious hardware malfunction

  You could try to load the default settings in the BIOS. Enter in the BIOS, and then press the F9 key to load defaults. Then save & exit the BIOS and try to start again.

  The HARD drive is recognized correctly in the BIOS? If so I try a recovery disk Toshiba recovery installation and check if the problem is hardware or software partners.

• Mac OS x won't start on mac pro esxi host

  We have the latest mac pro machine functioning as a construction of host 5.5.0 esxi 2718055.  We have setup the virtual Mac machine of the as a waiter in a magic triangle to our Mac OSX windows domain configuration.  Everything was up and running for some time now not really used because we delayed the purchase of our projected deployment Mac until this year.  I logged on today, and he says he has several updates and necessary to restart, so we issued the command reboot. Now the machine won't start upward.  It starts the boot process you see the Apple logo and progress bar starts moving on a 1/4 of the way and then it just turned off. I tried several of the commands below in the link, but nothing works, it just turns off. I tried to use my mac with vm ware fusion and the connection to the host and always change. I have triple checked that I am in the comments window active when you press these commands, but the problem is it only stays on during approximately 5 seconds then stops. I have removed from the inventory of esxi and re added, as well as restarted the ESXi host as well.  The virtual machine is sitting on the local storage of the esxi server.

  https://support.Apple.com/en-AU/HT201255

  Has anyone else had a problem similar to this?  I'm getting to this section and the progress bar starts to go, but then stops and turns off virtual machine.  How can I enter in address this further.

  

  Okay, so I went through the list and now I got using the command option r. tried before but maybe I press the keys long enough.  I was using my mac book pro and pro fusion to do all this. Couldn't make it work when you use the client heavy vsphere on my windows machine. Repair disk permissions is grayed out. I ran check disk permissions and got a ton of errors, ran check disk and he stopped saying repair the disk. Ran repair disk and he stopped to say that he cannot repair the disk, backup as many files as possible, reformat the drive and restore your backup files.

  Is there another way to try to fix this sucker, or is he at this point a POS and build a new one?

  

  

• MacBook Air 11 "2012 won't start

  My MacBook has been in place and become Finder does not always whenever I try to watch my files.

  So I decided to restart and now it won't start, the startup would always freeze in the middle of the progress bar.

  I tried:

  Repair/check disk + permissions - no problem

  Reset NVRAM memory - still does not start

  Reset SMC - still does not start

  I tried single - user drive is quite well

  Reinstalling OSX - cannot run due to 'this article is temporarily unavailable.

  And finally, the verbose mode and I am skeptical behind the text following code/orders:

  Dynamic code of I080211AWDLPeerManager::configure not support on this device

  I080211AWDLPeerManager::getVHtCapabilityIE cannot get the vht ret 2d capabilities

  EN1: enable successful "Promiscuous" mode

  en0: BSSID changed to XX

  Afree mode detailed of these commands would freeze too.

  I tried almost everything and I don't want to consider formatting my drive, which can also not let me install OSX for the above mentioned reason. So yes, all my options are gone. It's quite frustrating that came from nowhere and that my options are now extremely slim.

  To add my MacBook is no longer a guarantee and it doesn't have the AppleCare.

  I'd appreciate any help, thanks!

  Reinstall OS X without erasing the drive

  HD recovery start: restart the computer after the ring, press on and hold down the COMMAND and R until the menu screen appears.

  Repair the hard drive and permissions: at startup, select in the main menu disk utility. Repair hard disk and permissions as follows.

  When the recovery menu appears, select disk utility and press the continue button. Disk utility charges and select Macintosh HD entry indented from the list on the left.  Click the first aid tab, and then click the repair disk button. If disk utility reports any errors that have been corrected, then again run repair disc until no errors are reported. If no errors are reported, click repair permissions . Wait until the operation is complete, then quit disk utility and return to the main menu.

  Reinstall OS X: Select reinstall OS X and click on the continue button.

  Note : You will need an active Internet connection. I suggest to use Ethernet if possible because it's three times faster than Wi - Fi and more reliable.

  If you have no success with the above, try:

  Install or reinstall OS X from scratch

  Make sure that you have backed up your files because the following procedure will remove all of the hard drive.

  HD recovery start:

  Restart the computer and after the buzzer, press on and hold down the COMMAND and R until the menu screen appears.

  Erase the drive:

  1. select in the main menu disk utility and click on the continue button.

  2. once the charges of THE select your boot volume (usually Macintosh HD) in the

  list on the left. Click on the Erase tab in the main window of THE.

  3. set the type of format Mac OS extended (journaled). If necessary, click

  Security and button all the option data from scratch in a single pass. Click

  the clear button and wait until the process is complete.

  4 leave FROM and return to the main menu.

  Reinstall OS X: Select reinstall OS X and click on the install button.

  Note : You will need an active Internet connection. I suggest to use Ethernet if possible

  because it is three times faster than wireless.

  This should install the version of Mac OS X that you had installed it.

• ADED 2nd HD in 810 Elite HPE but now won't start

  Just bought a 135qe-810 w/Win7.

  I'm moving my HD 300 GB Maxtor SATA existing my HP hpe-150ff to my new 810-135qe.  This isn't a bootable hard drive.  Data only.  Hung but now computer won't start; system goes into recovery mode.  Ouch.  I can see the drive in the BIOS and everything seems good.  Shut down and unplugged the HD Maxtor, reboot and the computer starts very well.  Brought back the HD in the older hpe 150ff and 150 boots and HD works very well.  Why can I not use this HD with the new computer.  If I buy a new HD, will it work?  Can I use more than one HD on this computer?

  Hey DocCoder...

  I agree, adding a second disc, especially in this PC with 2 open housing should be child's play.

  No matter how lucky you have another HARD disk, you can try? I have a similar PC (configure to order) same motherboard and one bunch of others in my lab here and they all work without a hitch.

  As a test, I tried the disks SATA version 2.0 and 3.0, with a number of different manufacturers go all the way in 2007. Each of them appeared very well (some even had an OS bootable on them and has not caused any problems since SATA looks like for the first bootable hard disk from SATA 0).

  There is no settings on your PC to change, it should just plug and play so to speak... So before you return the PC, find out if it could be the drive you want to put in it.

  Good luck.

  Bill

• G580 - laptop won't start not

  I had purchased lenovo g580 core i3 a year ago. 2 days, after closing my laptop, when I tried to turn it on, screen appeared at the beginning, but not usual lenovo can't anything after that. It crashes without giving a answer... There is 2 option or press F2 for Setup and F12 for the boot menu. but nothing is happening, even when I press the buttons. someone help me please

  Mod edit: System model added to the front of the subject line to improve visibility / clarity.

  I suspect that your HARD drive has a problem, generally, it's like that, it won't start if the HARD drive was fried on you, try a key recovery to restore as long as day 1. Otherwise, buy a slap of casing 2.5 drive your hard drive inside, save the files after reinstall windows 8 or make the one key recovery.

• My W4-820 Iconia won't start... I think Windows is damaged or missing.

  I intend to sell my tablet to my son, so I started a system reset. Don't know exactly what happened, even if I chose back to an earlier version of Windows. Now the unit won't start... after the Acer screen flash, it empties.

  I've tried several things:

  1A tried to install a USB which (I think) has both 32 and 64 bits Windows 10, downloaded with Microsoft Media creation tool. No joy.

  2. created a cool USB with the media creation tool. No joy, once again.

  3. I've tried several repair options using these tools. A couple of times, I've reached the point where Windows complains that it cannot start and offers advanced options. When I finally reached the point where I can boot from the USB key and receive a screen that offers you to install Windows, the touchscreen responds quite so I can not choose the option to continue with the installation.

  4. I tried to boot from the recovery of Windows 8.1 DVD I received with the device. The towers of DVD and I can hear and feel the head of the research, but the Acer logo remains on the screen and finally goes out.

  Late last night, I made an ISO of the recovery DVDs and Rufus to make a USB bootable, but then it was too late to try, so it will be tonight when I get home from work.

  I have installed and reinstalled Windows 10 a couple of times on this tablet (it has sort of an experimental / test bed for me) and never had a problem remotely like that.

  Is there anything else I can try, or something escapes me? Is it possible trying to boot from the SD card (I don't see this option in the boot options).

  I think it's likely that you'll want to put a USB hub so that you can boot from USB and having a physical keyboard. And no, you can't boot from SD cards.

• Acer laptop won't start

  Hello, I'm new here... In any case my Acer Aspire E 15 won't start. All I get is a small box blue message which said: lack of default boot device or startup failed. Insert the recovery media and press a key. Then select "Boot Manager" to select a new device boot or Boot Recovery Media. " So I press on enter a couple of times just to go back to the same blue message dialog box. I tried to go and wait five seconds to launch a kind of recovery, but it did not work. Then I activated the f12 boot sequence, and this alteration has nothing. My laptop did not come with a CD/DVD player, when my father bought new last Christmas. I uninstalled Microsoft Office Spotify and Amazon the last time that I logged online. The 64-bit Windows 8.1 is built in. Maybe that remove some files. IDK. What should I do? Do I need some sort of media recovery USB device? Your help is appreciated. Thanks, Neil

  It was a hardware problem and now it is fixed. Back to zero once again.

• If my printer USB cable is connected, my computer won't start?

  If the printer is on and the USB port connected.  The computer won't start.  If I turn on the laptop with the USB plugged in and as it starts and then turn on the printer, everything works fine.  Almost ok.  I think I should be able to leave the printer on all the time as I do at work.  Then when I start the computer, the printer is ready.  Every other printer I've ever had worked this way.  Any suggestions?

  Maybe the printer looks like a hard drive (some printers have card readers that make them look like a disk) and the computer attempts to boot from the USB drive instead of the hard drive?  It would be a modification of the settings in the BIOS

  'Teething problems of a PC with a connected external USB drive.
    <>http://wdc.custhelp.com/app/answers/detail/A_ID/1201/~/problems-booting-a-PC-with-an-external-USB-drive-connected>

  Another article I found...  Not sure I can add much further than.

  "USB device does not initialize at startup or Windows XP no longer meets the start or stop"
    <>http://support.Microsoft.com/kb/830957 >

  HTH,
  JW

• HP Pavilion won't start not

  Hello

  My HP Pavilion (info below) is does not start. She asks the system repair CD I bought them at HP but the system is still not recognizes them and won't start do not. I have run all diagnostic tests (hard disk, memory, etc). All the great test, no problem. Suggestions:

  Model number:

  LW407UA

  Description of the model:

  LAPTOP HP PAVILION G7 - 1113CL

  Serial number:

  [number of Series edited by Moderator]

  Creator:

  RYYCEBL

  Hello

  Try the following.

  If you do not, use another PC to create a rescue CD Windows 7.  Download the ISO relevant among the links below - if you are unsure, your laptop is listed as coming from a 64-bit installation...

  Windows 7 32 bit

  Windows 7 64 bit

  You must use an app like ImgBurn ( Note: you can deselect additional software during installation of ImgBurn options) to burn the ISO to a CD - a guide on the use of ImgBurn to write an ISO on a disc is here.

  When creating, type following the ESC key as soon as you start the launch of the laptop Boot Menu, and then insert the rescue CD.  Select the Boot Menu options ( f9 ), use the arrow keys to select the CD/DVD drive and press ENTER.  You can also get a prompt to "Press any key to" continuous - it if requested.

  Select the "Repair your computer" option and follow Option 2 in the guide on the link below to run the Startup Repair - you may need to run this 2 or 3 times.

  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  If the above does not help, take note of any error message you get during the procedure and include them with your next post.

  Kind regards

  DP - K

• Help! Laptop won't start up. BSOD "Stop: c000021a {fatal system error}...". »

  I have a laptop Dell Inspiron 1750. Since Sept 09.

  Starting from Saturday, may 8 my system won't start up

  I turn it on it loads the Dell logo, loads the windows logo, and then flashes a blue screen for a split second (the blue screen flashes so quickly that it is difficult to read what he says, so I recorded it and it comes up with "STOP: c000021a {fatal system error} the verification of a knownDLL failed.") system process finished unexpectedly the status of 0xc000012f (0x0007c220 0x00000000) the system has been shut down.) and restarts after the dell logo loading again it goes to a black screen with the options to launch start up repair or start windows normally.

  I have Launced the Startup Repair, after loading files and checking for problems it says then Startup Repair cannot repair this computer automatically. I made the diagnosis and he says there is no problem, I have contatced dell as it is still under warranty but they said this isn't a hardware problem, it is a software problem and infact NOT covered by the warranty and I have to pay £60 to have the support of the software. I don't have a recovery disc and tried to restore the system to an earlier stage. But no luck!

  Was hoping someone here, perhaps a solution. Please please please help!

  Thank you very much
  Ship

  Status 0xc000012f is "STATUS_INVALID_IMAGE_NOT_MZ" - "the file specified image did not have the correct format, it did have an initial MZ." (anecdote: binary windows start with MZ - the initials of Mark Zbikowski - who was a promoter of the MS-DOS product)

  That, with "a knownDLL verification failed."  Basically telling you that you have corrupted files on your system.  Any chance you are able to boot into safe mode or safe mode with command prompt to run SFC/scannow?  Can you somehow shoot out of the system event logs and check the events worthy of attention?  Are you all able to run chkdsk on the drive through the command prompt in the System Recovery Options?

• Won't start at all. just a black screen. Only the satrts upward on safe mode

  Won't start at all. just a black screen. Only the satrts upward on safe mode

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner