ReadyNAS-102 (6.4.1) disconnects randomly

Similar Questions

• ReadyNASOS 6.4.0 - T136 (beta 4) - network actions disconnect randomly

  After you have installed the latest beta version of ReadyNAS (T136) my network shares are randomly falling sporadically.

  Model: ReadyNAS 102

  SW: 6.4.0 T136 Beta 4

  Network connection: CAT6 Ethernet

  -Tired of changing the cables, always randomly disconnects

  -Tired another port on the router, always randomly disconnects

  Protocol: AFP

  Any suggestions? I'd be happy to send the log files. I am not versed in the Netgear ReadyNAS log files, so I haven't looked at them.

  Which firmware you would update go?

  What version of Mac OS X you are running?

  Yes, send logs (see newspapers of sending a link in my signature).

• External drive USB disconnects randomly

  Hello

  I use a Mac mini as a server and include two OWC MiniStacks in annex. The Ministacks are connected via USB3 and underneath the Mac mini. The Ministack in the Middle started disconnecting randomly and I have to turn off and on to get it connected.

  The Mac mini is always on and I use the disks USB as server provided the network disks.

  I have Seagate Enterprise drives in the world.

  I get the following output in the Console:

  22/08/16 19:08:19, 000 core [0] USB device 1E91B0B114700000 - reset BOT finished with kIOReturnTimeout.

  22/08/16 19:08:19, 000 core [0] USB device 1E91B0B114700000 - will be reset to zero.

  22/08/16 19:08:20, 000 core [0] 1533181.822274 PRT7@14700000: AppleUSB30XHCIPort::resetAndCreateDevice: could not create the device after tests (1), disabling port

  22/08/16 19:08:21, 000 core [0] USB device 1E91B0B114700000 - fConsecutiveResetCount = 1.

  22/08/16 19:08:21, 000 core [0] disk3s2: device / channel is not attached.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  ...

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] hfs: err 6 reading VH blk (air = 2 database SERVER)

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:21, 000 core [0] hfs: err 6 reading VH blk (air = 2 database SERVER)

  22/08/16 19:08:21, 000 core [0] disk3s2: media is prΘsent.

  ...

  22/08/16 19:08:22, 000 core [0] hfs: err 6 reading VH blk (air = 2 database SERVER)

  22/08/16 19:08:22, 000 core [0] hfs: disassemble initiated on SERVER 2 DATA on the device disk3s2

  22/08/16 19:08:22, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:22, 000 core [0] hfs: err 6 reading VH blk (air = 2 database SERVER)

  22/08/16 19:08:22, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:22, 000 core [0] hfs: err 6 reading VH blk (air = 2 database SERVER)

  22/08/16 19:08:22, 000 core [0] disk3s2: media is prΘsent.

  22/08/16 19:08:22, 000 core [0] jnl: disk3s2: do_jnl_io: strategy err 0 x 6

  22/08/16 19:08:22, 000 core [0] jnl: disk3s2: write_journal_header: error writing to the journal header!

  22/08/16 19:08:22, recorder disc 775 fseventsd [61]: failed to open the output file DATA Volumes/SERVER 2/.fseventsd/00000000088fc0e6 (no such file or directory). Mount point/Volumes/2/.fseventsd database SERVER

  22/08/16 19:08:22, 776 disc fseventsd recorder [61]: failed to open the output file DATA Volumes/SERVER 2/.fseventsd/00000000088fc0e6 (no such file or directory). Mount point/Volumes/2/.fseventsd database SERVER

  22/08/16 19:08:23, 085 deleted [695] normalizeUserMountpoint:791 volRoot failed for SERVER/Volumes of DATA 2

  22/08/16 19:08:23, 085 deleted [695] _validateVolume:813 unable to normalize the volume: ' / SERVER/Volumes of DATA 2 ", flight: (null)

  22/08/16 19:08:26, certadmin 148 [97828] connected to the notification Service

  What is going on?

  HARD drive fault?

  Not pregnant?

  Damn Mac mini?

  I thank very you much in advance!

  He could be sleeping?

  Could it be overheating?

  Have you tried swapping the cables yet?

• Mouse Bluetooth disconnects randomly the macbook pro

  So, I have a logitech bluetooth mouse (M535) and sometimes it disconnect random for my mac and then reconnect a few moments later... Is there a reason that this is happening, or is it possible to fix it?

  Bluetooth devices no longer meet

  Sources of interference Bluetooth

  Sources of interference of Bluetooth (2)

  Problems of Bluetooth wireless

  If your Wi - Fi connection is able to generate a 5 GHz signal, try this.

  Restart your computer, hold down the option/alt - P - R keys command before the gray screen appears. Continue until you hear the startup chime for the second time.

  Reset the NVRAM EXTRA memory

• ReadyNAS 102 and 5 BT business hub

  Hello world

  I moved to BT Business Monday. I have connected my ReadyNAS 102 and I can access it ok on my mac via the finder and Explorer on my Windows PC 10.

  The problem I have is when I have access to the net via readycloud.neatgear.com. The unit will display offline.

  I have disabled the firewall on the BT Business Hub 5, but he was showing always offline.

  I can log in as admin ok when I connect via IP address directly.

  Can someone tell me what I need to do?

  Thanks in advance.

  He fixed everyone - the readynas has the old IP configured DNS.

• Sonos and ReadyNAS 102 v6.4.1 compatibility

  I use a ReadyNas 102 to serve files from music for a Sonos system.

  Everything worked perfectly under firmware 6.4.0, but after upgrading to Sonos 6.4.1, is no longer able to index or see about two-thirds of the content (files flac and mp3).

  Decommissioning of 6.4.0 snaps back and Sonos works as expected and is able to index my entire collection.

  the upgrade of ReadyNas is the only thing that's changed.

  Any ideas what's happening?

  righteye wrote:

  I use a ReadyNas 102 to serve files from music for a Sonos system.

  Everything worked perfectly under firmware 6.4.0, but after upgrading to Sonos 6.4.1, is no longer able to index or see about two-thirds of the content (files flac and mp3).

  Decommissioning of 6.4.0 snaps back and Sonos works as expected and is able to index my entire collection.

  the upgrade of ReadyNas is the only thing that's changed.

  Any ideas what's happening?

  I use my RN 204 to broadcast my Sonos system files and it still works after that I updated to 6.4.1.

  You have active Antivirus?

• How to enable curl on readynas 102

  How to activate curl on my readynas 102. I find no answer anywhere.

  I tried to install curl via winscp through the command apt but failed. Please help me with this

  Ah. What of it? :

  # apt - get install php5-curl

  You can try adding

  extension = curl.so

  in your php.ini file.

• ReadyNAS 102: Problems with 3TO discs?

  Hi all

  I have a ReadyNAS 102 with two WD 1 TB drives, but I'm getting closer to full and upgrade to hard drives of 3 TB. I see a lot of discussions here on the 102 and 2 discs to 3 TB. Is there a problem with discs on the 102 3TO?

  Thank you

  Reference Dell

  3 TB works very well, I had a WD30EFRX in the mine for awhile (2 1/2 years for the first hard disk).

  I recommend readers NAS proposed (in the case of WD, which would be RED or RED Pro).

• Cannot install Firmware on ReadyNAS 102 v6.2.5

  Hello world

  I tried to install the new OS version 6.2.5 on my ReadyNAS 102 but each time it restarts, it always goes back to 6.2.4. I tried to do the manual install, as before, but nothing helped. Does anyone have a solution to this?

  Thank you

  I had been looking for ways to install v6.4 now and earlier I came across this thread: https://community.netgear.com/t5/New-to-ReadyNAS/Unable-to-Uograde-to-NASOS-6-4-0/td-p/993406 which led me to this FAQ about v6.4: http://kb.netgear.com/app/answers/detail/a_id/29961 which then leads to this workaround: http://kb.netgear.com/app/answers/detail/a_id/29961

  The workaround solution "works".

• ReadyNAS 102 no access to the files either

  Hi, I need help!
  Let me try to describe the events that led to this.

  1. I discovered yesterday that the ftp did not work on my readynas 102 suddenly

  2. I went into the admin page and tried to turn off and restart the ftp service. (he has not solved)

  3. I accidentally disabled the http service to uncheck "Admin HTTP"

  4. all access to my nas was suddenly unavailable. ? Shared folders no longer appear in my network. -I got tvmobili installed all this while and strangely tvmobili can still access my files via dlna on my TV.

  5. I tried os reinstall, but in vain.

  6 willing Raidar to a management service is offline error and I am also unable to download all the newspapers. (Failed)

  No browse button, Admin leads to a page that will never load.

  7 diagnosis indicates Disk 1 has 2 timeouts of command

  8. I tried to take the drive out and put it in an external hard drive enclosure. OS x is unable to read the disc. I tried it on debian via parallels and it has a hard drive tb 5 complete with unknown partition (PMBR) and impossible to climb. (How can it be empty if I can still access my files through dlna via tvmobili?) What format is the hard drive in and how can I get on osx or any os?

  9. If I boot the nas as usual, the power button keeps blinking.

  I am currently using Mac in my household. I owe too much in the hard drive just do a factory reset. any ideas anyone? I'd really like to get the files inside!

  Thanks for any help!

  
  

• ReadyNAS 102 - cannot install applications (all)

  The evening

  I bought a ReadyNAS 102 in January, after an initial installation, I installed OwnCloud and decided that I didn't want so I uninstalled. This had the unusual side effect of uninstalling the main web server for the device, after having met the support team, I took the action at the factory reset my device, which has restored the main web server

  Since then I was able to install all the applications. Whenever I try to do, I get the error "unable to install ."

  I've recently updated to 6.2.2-> 6.2.4 firmware and I'm still having the same issues. Although now I also have the message "Apps operation failed: list of applications can be missing or out of date." You want to update the list now? ' - choose 'Yes' to this fact appear a message "update list" box

  I then get a response "list of the application updated successfully. You can now install applications", however, any application I try to install still does not work and the guest above is provided again.

  I would be grateful any advice anyone can offer to fix this issues.

  Thank you

  Chris.

  It turns out that the DNS has been set incorrectly and the NAS could not connect to the internet. Refreshing DNS on the Server NAS has solved the problem.

• ReadyNAS 102

  Hello

  After several years of working perfectly, my ReadyNAS 102 has the following problem:

  • I can't access the Administration Web page, it says only: he is in charge and eventually times out.
    Although it either in this state that RAIDAR said the device starts up - but it never happened that. The power light blinks slowly
  • When I boot it in mode read-only, there is no problem, and both drives are reported in good health.
  • Whe in read-only mode, I can copy data off the coast on a USB drive or eSATA. I can also SSH to the machine
  • I noticed in the newspapers that he has recently upgraded to 6.4.2.
  • I saw a few posts about disabling the add-on - the only one I have is "Supersync" and it is not executed. The instructions in the messages do not seem to apply it is to say

  I initially thought one of the drives died - but it seems that there is a problem with the operating system.

  If anyone can help solve me this I woud be very grateful

  Andrew

  Your data volume becomes quite full and there is a lot of fragmentation.

  We recommend that you keep the volume of use at least 80%. If you want to go a little higher that regular maintenance of regular volume is important.

  The disk with ATA errors looks like it is a failure.

  It would be advisable to back up your data, perform a factory reset, be more selective about which actions to use bit - rot protection and instant and restore your backup data.

• ReadyNAS 102 extremely slow after upgrade to 6.4.1

  I have a Readynas 102 system with 2 drives of 2 TB. There are about 230 GB of data onto the disks. Yesterday, I upgraded 6.4.1, as suggested in the administration page. After that, the system is extremely slow. I use windows 7 pc and modem Asus, all wired. In windows Explorer, it takes minutes to get the folder hierarchy, if it comes with an answer at all. In many cases, that the answer is, disk unreachable.

  Is there anyone who can help me with this

  Thank you

  Joop Baltussen

  What firmware are you running?

  The antivirus service is enabled.

• Wireless network problem: disconnects randomly anywhere between 1 and 4 hours.

  I have a wireless network problem, it disconnects randomly anywhere between 1 h and 4 h. The network consists of a Samsung 4 G hotspot and a Linksys AE1000. The signal strength is excellent, the AE1000 is 1 ft of the computer and 1 ft of the HotSpot.  The computer is a Dell Dimension 2400. Any ideas?

  Hi Jack,

  Problem solved.  I did 2 assumptions about the original problem.  I assumed that the 2 Tech that I spoke made the hurt their product. Battery saver has been activated on the hotspot.

  Thanks again

  Greg

• Program to disconnect randomly with SonicWall

  Hello

  We have a chat program called HUD that belongs to our Trixbox phone server. After the passage of a Zywall Firewall in 215 SonicWall, the program disconnects randomly every 30 seconds to 2 minutes at different intervals for all users. This affects users within our network, but not outside.

  The program uses a TCP port that is transmitted WAN > LAN pointing to the server.

  We also tried adding QOS to the firewall rule for nothing doesn't. We have also tried to add a LAN > WAN, all in all, with QOS and that did not help.

  If we move to our old router, everything is fine.

  Any ideas what could cause this?

  Hello

  In fact, we have fixed it. We simply removed and read via the Server Assistant and he began to work for some reason any.

  Thank you
  Ben