ReadyNas Pro 6 v2 - stuck in 'boot' after attempt downloaded journal #26682838

Similar Questions

• ReadyNAS Pro 6 is stuck at the start...

  The ReadyNAS Pro 6 is running OS 6.4.1. It has 6 x 4TB Seagate disks and runs since sept 2013 OS6.

  1.5 weeks ago about the NAS got does not. The screen was black and did not respond to the power button. Also, there not respod on SMB, HTTPS or SSH application.

  I held the power button for a hard reset, the system was running from 21 to 24, then it's the same thing. I did a hard reset with the power button, but the system got stuck on Booting... I have powered the 25 and the start menu. I tried to run a test drive, he counted records (indicating the disk numbers) and has begun to rise 1%. The next morning the system still worked Testing (remember exact) just read on the screen.

  Now I tried to reinstall OS, but the system has been slain at the start... FW update (no figures for disks are displayed on the screen). I guess the next thing to try is the recovery from USB?

  Replied to your MP that you sent earlier this morning.

• Amount of data lost after replacement of disc on Readynas Pro 6

  Hi, I just came across a serious problem, and I hope someone can help me.

  Currently my Readynas Pro 6 does not see no matter what volume the 6 X-Raid Array disk more.

  I walked past my NAS one a few hours ago and saw the display flashing with the message that the volume has been degraded. A little strange as I had not had any warning about the deterioration of the disc before. I have identified the disc (#2) and replaced by a spare part that I had prepared for such occasions. After the reconstruction has been completed the readynas showed the message that the volume was still degraded: about 5 to 10 minutes later the identified readynas drive 5 must be replaced. Two drives at the same time? I don't have another spare drive, so I thought of making a scrub to see if that would make a difference. The scrub my NAS on the timer go out. When I restarted it, it had lost its range X-Raid.

  Anyone have any idea if I can solve this? The pro6 nas Works 6.2.4, the admin interface works fine, I have access to log files.

  Erik

  Yes, required that windows file systems.

  Obviously much cheaper than any professional collection service.

• Compaq presario sr5518f: computer stuck on boot logo screen

  I just put in a 2nd inside the hard drive and now it gets stuck on boot logo screen I have disable reboot it 1 - 2 times before the beginning of the right way, any help would be great

  Hello @njchuck76,

  I understand that your desktop computer is stuck on boot logo screen after the installation of a secondary hard drive, and I'd be happy to help you in this case!

  To make sure that your system is booting of the operating system drive, I recommend that you follow the steps described in this document on the configuration of the Boot in the BIOS system order.

  If your computer is still not able to boot into Windows after making sure the boot order is appropriate, I suggest following this resource on the computer does not (Windows 8). This should help with running hardware diagnostics.

  If the problem persists after you complete all the steps listed above, please call our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I hope this helps!

  Concerning

• Air IPad also get stuck cant activated after update 9.3 not only the ipad 2

  My ipad air also get stuck cant activated after update 9.3 Thursday so far seems that apple did not the solution... I did also his already suggests.

  Remove all the account update DHU icloud and restore from itunes, even now downgrade to 9.2.1 but still nothing... Stress really full with this apple product.

  I also have the same problem after that latest iOS update.

  Help, please

• Pavilion dv6-3225dx: laptop fails to boot after upgrading RAM.

  Hello

  Recently, I tried upgrading my laptop RAM 8 GB which is max you may have to wait. The RAM sticks were (x 2) DDR3 4 GB Samsung 1600 12800 mhz 1.35v. The system has detected the new RAM, showed the new memory and even spent the memory test. But this isn't the windows startup. I tried to clear CMOS. But without success. Do not let me windows. BIOS version is up to date (F29). Is there any setting for this?

  Thanks for all the help!

  Hello:

  Please see this discussion.  It must be very picky about what memory you use in your model series...

  http://h30434.www3.HP.com/T5/notebook-hardware-and-upgrade-questions/Pavilion-DV6-Windows-10-wont-boot-after-memory-upgrade-4Gb/m-p/5776161#M359223

• Tabelt stuck on boot logo

  Everytime I turn on my HP Slate 7 he is stuck on boot logo

  Thanks, but I found a way to solve it

  You must start your Hp slate in moda recovery 7 (press and hold power and vl to butten)

  And install the recovery update (put the update on sd card)

  Download here for 7 2801 slate

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4153 & LC = on & CC = NZ & DLC = in & sw_lang = & Product = 5377047 #n143

  7 2800 slate

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4153 & LC = on & CC = NZ & DLC = in & sw_lang = & Product = 5376605 #n147

• Management Services is offline readynas pro 6

  I rebooted my NAS this morning and it does not load the admin page, I can access some applications via the ports, but not the admin page.

  Any help would be greatly appreciated, I have no idea how to solve. Well above my pay grade.

  Its a readynas pro 6 OS6, I officially running has no support. I really want to avoid a reset nothing can save. SSH logins fair we currently I enter a user name.

  See you soon.

  I sent you a PM.

  Really, you should backup your data.

  Any important data should be stored on just one device.

• ReadyNAS Pro 6 - Pro Support

  Hi all, I'm looking for more details on the pro for my Readynas Pro 6 support. However, when I called support they advised only per-incident support is available. The reason why I ask that it is the customer that I support has no real technical knowledge and it's always a matter of concern for me when I am not available. It would be good if there was a service I could buy so they could call an experienced support engineer who could go to distance effectively and help them if I wasn't able to. Thank you...

  It is what it is.

  The 314 is a suitable replacement for the Pro 4. It has a faster than the Pro 4 processor and double the RAM. However, it is not as powerful as the Pro 6. It depends on the use case whether it is appropriate.

  The 516 has a better processor than the Pro 6 and 4 x the RAM.

  Yes, you can run double redundancy on the 314. A system of 4-Bay double redundancy would be the capacity of the smallest disk.

  Rackmount the 3130 or for a 12 - bay 3220/4220 according to budget would be the way to go.

• VAIO pro 13 sensor sends the brightness after the upgrade to windows Pro 8.1

  I have the Sony Vaio 13, 17 Pro, model name: SVP13218PGB.

  After updating windows 8.1Pro,

  In the Vaio control center when I put on 'ON' in the sense of brightness and automatically display the brightness accordingly.

  rather than adjust the brightness, brightness going up to 100%!

  Unfortunately, I have to stop in order to get the brightness of the screen you want.

  There is a small problem with the software and sensor windows 8.1

  UPDATE: ON THE SONY SITE (Asia)... I don't HAVE THE latest version (R1040V7) OF THE BIOS.

  It seems that the Intel HD graphics driver updated for Windows 8.1 was pulled for my model (SVP1321DCXS). Maybe the update grpahics driver caused the problem. What driver version are those affected running?

  The most recent available on Sony's site from this time is 9.18.10.3165.

• Rough Cut created as a prelude with transitions, sent to first Pro works then, using 'replace with After Effects comp', loses the transitions. Why?

  With the help of Creative Cloud 2015 apps exclusively on a 64-bit win 8.1 Pro Gigabyte MB 8 core AMD pcu with 16 GB of ram and nVidia GeForce 8800 GTX graphics card. I deleted all the cache and restarted.

  Created a simple Rough Cut in prelude routinely using H.264 in mp4 video and still photos from format of (via Media Encoder) components ingested in prelude ~

  Rough Cut, composed of a sequence of 1 always followed by 4 x 3 second mp4 followed by another still followed by 4 more 3 second MP4, total length of 30 seconds.

  Together, then the default prelude "Cross dissolve" transition between each item in the first edit.

  Successfully sent this first edit in Premiere Pro using the menu option integrated prelude - send to first.

  Works like a charm in Premiere Pro, including cross-fade transitions.

  HOWEVER, now, in Premiere Pro, have not been able to use then 'Replace with After Effects' option under ' Dynamic Link ~ option is grayed out, regardless of how I select the element/sequence to replace. "

  The only way I have found to use all the options 'Replace with After Effects' is the one that appears when you right-click on a sequence in the timeline window, but when open in After Effects, crossfade effect has disappeared; Only the elements of the scene still show when parsing through the sequence in the timeline.

  After investigation, it turns out that the order of the individual elements that contribute, in the after effects project Panel, has been auto-réarrangés as assets to dissolve cross is now distributed among the other elements of the sequence and therefore cannot perform the intended function. It also destroys the fade in Premiere Pro effect that worked very well before attempting this 'Replace with After Effects' option.

  I need to find a way to keep this intact sequence in Premiere Pro and after Effecys and be able to use After Effects to add additional effects to this rough cut sequence...

  I have run the available tutorials in Adobe and Lynda.com and searched the forum for an explanation, but so far, nothing, I found has solved this problem. :

  1. How can I get the Adobe Dynamic Link to function when it is grayed out in the choice of Menu file?
  2. How to make the right click option 'replace with After Effects' to send the sequence in After Effects without changing its infrastructure, as described above?

  I await with confidence to find someone here who knows what I'm doing well wrung out! and who can show me the error of my ways. TIA. /PSB

  First transitions don't come in After Effects. They never have. Your workflow is not compatible with dynamic link. You should use AE to create shots and then change these shots in Premiere Pro. Trying to bring in a sequence which was finalized with effects and transitions is a losing proposition and not recommended.

• Old computer is dying. You had to buy a new computer. Can I just download my Adobe Acrobat Pro XI on the Adobe site after signing in, something else, or do I need special permission to put it on a new computer, because it costs much $$s? Thank you. Need t

  Old computer is dying. You had to buy a new computer. Can I just download my Adobe Acrobat Pro XI on the Adobe site after signing in, something else, or do I need special permission to put it on a new computer, because it costs much $$s? Thank you. Need to know as soon as possible since the store will be to transfer my data to the new laptop.

  Moving to this discussion on the Acrobat Installation questions & put forum to date.

  Jessem89886042 if you need to download the installation files for Acrobat Professional XI retail, they are available at download Acrobat products | Standard, Pro | DC, XI, X.  You can also find details on how to locate the serial number to quickly find your serial number.  We invite you to update this discussion if you have any questions about the steps listed in the document.

• How install and run Acrobat Pro after having downloaded the trial without checking 'install '?

  How install and run Acrobat Pro after having downloaded the trial without checking 'install '?

  You can not.  You must check 'install' to install and run it.

• Premiere Pro CS6 installation appears to hang after 20 minutes. 36%, there is a resolution?

  Premiere Pro CS6 installation appears to hang after 20 minutes. 36%, there is a resolution?

  Manager of adobe application you use?

  If so, uninstall and then reinstall: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773

  If not, check your installation log files: http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html

• After you download incredimail, my screen goes white, says done, and I have to hit Ctrl-alt-delete.

  My laptop screen become white

  After you download incredimail, my screen goes white, says done, and I have to hit Ctrl-alt-delete. I removed incredimail and it still happens. It seems to be deteriorating

  Hi karlenechapman,

  ·         What version of the operating system is installed on the computer?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: If the problem does not persist in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

  Method 2: Update the graphics/display drivers.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly