Rebuild DriverStore?

Similar Questions

• I followed these steps several times, but he still has to work to rebuild the index.  Is there something else in the way of this work?

  Have you tried to rebuild the index spotlight several times, but it didn't work. I followed the steps through the system preferences, but there is no result for the rebuilding of the index.  Is there another way to do it, or is there another problem preventing it from working?

  Do you mean the following steps:

  Rebuild the index on your Mac - Apple Support Spotlight

• What is the best terminal codes to rebuild spotlight in the Sierra of MacOS?

  What is the best terminal codes to rebuild spotlight in the Sierra of MacOS?

  The recommended method for re-index/reconstruction is to open Spotlight preferences panel in system preferences, click on privacy. Now add the drive that you want to re - index to privacy window. Now delete this same player of the Privacy window, and it will now be indexed/rebuilt. No necessary terminal command.

• How to rebuild the mailboxes after the 'fixing' mail closes unexpectedly

  How do I rebuild my smart mailboxes?

  I lost all emails after fixing Mail stop unexpectedly

  Try to rebuild the mailbox.

  Rebuild the mailbox

  If this does not work, try re-indexing of mailboxes mailbox. This can take some time if you have a lot of mail.

  Reindex messages        For El Capitan, try looking in V3.

  Reindex messages (2)        See post by Linc Davis

• Portege R700 rebuild, ended up with two partitions

  Hello

  I did a full rebuild of my R700 since the recovery Tosh media today.

  Since I have a relatively small hard drive (120 GB SSD), I wanted to just have a drive. Worst of all, I certainly didn't want to have all files on the C: drive by default username more little that has all the apps.

  Can the two be easily merged partitions or am I buggered here? To specify me if honestly, I don't know what I would do differently even when there is no option in the reconstruction.

  For now, everything is on C:, including all the user and document records, on the D: there is a folder called "HDDRecovery" which I think was put there when the system has been rebuilt.

  Suggestions appreciated!

  Thank you

  Alastair

  > Can the two be easily merged partitions or am I buggered here?
  Well, the recovery disk created these two partitions automatically because the second contains the files on HARD drive recovery and option which means that you might be able to recover the HARD drive unit.

  But two partitions can be merged together; Look for the free tool called GParted
  http://gparted.sourceforge.NET/

  You can also use the internal option of the Windows operating system.

  In disk management, you can delete the second partition and can then lay the first partition.
  It should also work.

• Equium A60: Rebuild - need a recovery CD

  Hello
  I'm doing a full rebuild on an Equium A60 and have lost the discs of recovery and driver. I was wondering if anyone new where I might be able to acquire a copy of necessary disks or some new.
  Thanks for any help you can give me with this.

  Guy

  Hi guys ;)

  The Toshiba recovery CD you can order the Toshiba service partner in your country.
  It s not very expensive.

• Cannot rebuild the desktop

  Hello. I have a MacBook MB062LL/A (2,1-1181) running OS x 10.6.8 .tI was a little wide, slow running and other things. I just bought it used off eBay. The HD has been wiped clean with a new installation of the operating system (when I started I was greeted with the screen "familiar" multilingual) so he must be a Virgin installation (although Safari has quite a few cookies), but he continues to slow down really bad. I have reset the PRAM (Command-Option-P-R during startup) and I tried to rebuild the desktop (command-Optiom at the start), but it asks me if I want to rebuild the desktop. Can someone advise me? TIA.

  1. There is no office to rebuild in Mac OS X; This is a feature of Mac OS 9-era no equivalent Mac OS X.

  2. restart with the keys Option, command, P, and R keys.

  The answer above was copied and pasted from a previous post of Niel. rebuild the desktop for OS 10.6.8

  Maybe if you want to be more specific about your problem we move upward with a few suggestions. A report of EtreCheck can help http://etrecheck.com/

• Key FN + F8 does not not on Satellite M300 after system rebuild

  I recently (after a problem with a regular update of the XP) had to rebuild my M300 Sat because I had no order form setup that I fear, I made a mistake and installed the drivers of chip set too late.
  The process stopped at 90% and the system needed a hard reboot. After that everything seems OK, work with one exception about (so far):
  the FN F8 keyboard shortcut does not work.

  My questions:
  y is there a way to check the problem with this shortcut key and can it be repaired even with my a bit messy installtion order?
  -can, in some so, fix the mistakes I made with the order of installation for the chipset guide when the full 100%?

  Hope someone has some advice.

  Thanks in advance.

  Try the Wireless Hotkey driver from the Web from Toshiba site

• How to rebuild iTunes Library.xml file?

  My understanding is that the iTunes Library.xml file is used by 3rd party (not iTunes itself) applications to access the metadata on his iTunes library.  I think that my iTunes Library.xml is corrupt.  Two other applications 3rd party who has access to the file produce strange results.   If I quit iTunes, delete the file, then re - start iTunes, iTunes will rebuild the file?  Is there a downside to this?  THX

  pomme4moi wrote:

  If I quit iTunes, delete the file, then re - start iTunes, iTunes will rebuild the file?

  Yes.

  Is there a downside to this?

  N ° this file is rebuilt several times by iTunes, any time something is changed.

  When you switch a song, when you finish a song when you change a side, add/remove the work or words or anything, iTunes will rebuild this file.

• How to rebuild the Windows 7 start menu?

  Having had a virus and deleted successfully, I find myself with a strange problem.

  The virus, among other things, seems to have changed the menu start removing the 'pinned' programs is not a problem, but also remove the contents of the folders in "all programs", for example under "Microsoft Office" is a subfolder called "office tools" (empty), but nothing else.
  All programs are always there and the work that they are not available on the start menu. There must be a way to rebuild this menu without having to reinstall each of the very many pieces of software on the computer.

  Suggestions welcome.

  Common to all users start menu is C:\users\all users\microsoft\windows\start menu.
  For each menu C:\users\username\appdata\roaming\Microsoft\window s\start user.
  By default, these are hidden files.
  Open Windows Explorer and create shortcuts, copy, paste etc.

  A search not pulled up this [http://softzilla.blogspot.com/2011/04/free-windows-7-context-menu-editor.html] no idea if it is of no use

  Post edited by: peterk_1

• Satellite A100 - problems after bootcfg /rebuild

  Hi there guys!
  I have a problem, that's for sure. I'll just show you a screenshot to get the image messed up :-))

  http://i26.Tinypic.com/14uxbu1.jpg

  Well well... everything that's happened when I chose the option "Normal startup" in msconfig (this one: http://i25.tinypic.com/2emzlo0.jpg). Then I restarted the laptop and hal.dll was gone, so I went to the recovery console and did the command "bootcfg /rebuild. The first screenshot above is the result. That's all! :-))

  Any help will be appreciated.

  P.S. I use a laptop Toshiba A100-011 (core 2 duo) with windows XP

  P.S2. I tried to expand the hal.dll from winxp cd - nothing happened or there was some sort of mistake, I don't remember, that's why I used the bootcfg command.

  Thanks for your time,
  Regardz! :-)

  > I tried to expand the hal.dll from the CD of Win XP
  The picture above shows the Vista operating system. Therefore, you shouldn't t use all files from the XP operating system.

  However, I put t know why you use the bootcfg / rebuild command to get the parameters of the previous system. In your case, it would be desirable to bring the OS up to this early time.
  You can use the Vista System Restore tool to get the State of the old system.

  This should be easier to solve this problem!

• Satellite l.660-12 q - would the recovery disk rebuild the new HARD disk with a new recovery partition

  Talk about confusion. Does anyone know how to get a Toshiba C660 work after the HARD drive failed and the owner has stupidly NOT followed the instructions to make a recovery disk. Will be the recovery disk (if buy you one from Toshiba) rebuild the new HARD disk with a new recovery partition and install windows 7 (original OS) and accept the product key printed on the Windows license, attached to the base of the laptop. I have read a number of suggestions, but these have been considered incorrect by others.

  Surely, Toshiba must have a way to sort this problem.

  They read these messages?

  Hey Buddy

  I don't think it's really complicated, that I could find all the information about the recovery procedure in the user's manual

  The recovery disk must be created on the first day of purchase its recommended to create one in case something would be wrong with the HARD drive.

  The recovery disk contains an image. The image is a package containing Win system, drivers, tools and all the stuff pre-installed on the notebook.
  You bought the laptop and the system has already been activated so that you have need of t the key placed at the bottom of the unit.
  In addition, the use of the recovery disc formats the drive HARD integer (partitions too) and set the laptop in the same condition as at the first day of the purchase.

  There is also another option to recover the notebook called HARD drive recovery. This HARD drive recovery requires no recovery disk. The recovery disc HARD would be to use format ONLY partition C (System).

• Mail - Quit or quit and rebuild indexes

  All three of my Macs, all fairly new show an error in the mail, that gives me the choice to leave or Quit and rebuild the indexes.  I tried both, nothing happens.  Anyone know what is happening?

  Thanks in advance,

  Tom

  Please stop Mail. Force quit if necessary.

  Back up all data before proceeding.

  If you use OS X 10.11 ("El Capitan") or version later, triple - click anywhere in the line below on this page to select:

  ~/Library/Mail/V3/MailData

  If you use an older version of Mac OS X, use this line:

  ~/Library/Mail/V2/MailData

  Copy the selected text in the Clipboard by pressing Control-C key combination. In the Finder, select

  Go ▹ go to folder

  in the menu bar. Paste in the box that opens by pressing Command + V, then press return.

  A file window opens. In it he must be files with names as follows:

  Index of the envelope

  ExternalUpdates.storedata

  Move these files to the desktop, leaving the window open. Other files in the folder can have names more long that begin as above. Move these files, if any, in the trash.

  Mail recovery. It should invite you to re - import your messages. You can get a warning that the index is corrupted and that Mail must quit smoking. Click OK. Generally speaking, the process takes a few minutes, but this can take hours if you have gigantic mailboxes. In this case, you will be able to speed things up temporarily by adding your file to the list of personal information protection in the Spotlight preferences pane. Remove it when Mail has finished importing.

  If the import operation stalls or fails with an error message, quit Mail, delete the two new index files (maintenance of the original that you moved to the desktop) and try again. According to several reports, the second attempt can succeed if one does not.

  Test. If Mail now works as expected, you can delete the files that you moved to the desktop. If not, post your results.

• Lost iTunes Library - CAN not rebuild. Help!

  Tonight I thought I had lost most of my iTunes library. It turns out that I didn't have that I can find the content itself, but iTunes can't see it. So, I followed the instructions here to try to resolve the problem: https://support.apple.com/en-gb/HT203225

  It did not work. I found myself with some of my content. Most of my music, none of my TV or movies (and no, these were not bought through iTunes)

  I then tried to rebuild my iTunes Library with these instructions: http://www.mcelhearn.com/how-to-rebuild-your-itunes-library/

  It did not work also.

  So, I was wondering if I should completely remove iTunes from my iMac, the re - install it if this could work?

  Although I had to remove, and then reinstall iTunes, I still have all my content back inside however get. All content currently, lives on an external hard drive and so I do not know what to do really. I thought maybe I could drag and drop content more but there is more content on this external drive to the room, I have available on my iMac.

  Any ideas?

  The first method rebuilt your library by using a backup file created whenever you updated the iTunes application. If you have videos in there at the time that they should appear even if only as broken links. If they had not been entered and then realize that it uses an older version of your library file.  The library file doesn't say what media he recorded for you and where, not an inventory of your media files to iTunes.

  The second method allows to rebuild the library based on a version in alternate formats of the library file. It is regularly updated and if, during your previous attempts it updated the .xml to match the library at this stage, then that is clearly not good.

  I do not reinstall the application. If you are desperate then simply slide the media on the outside back into the existing library.  Designated as the place to store media in iTunes > Preferences > advanced is the external drive then he should leave the files there.

  You have the entire library on the external hard drive, or just media? Be aware if you have all of your external library must be on before launching iTunes.

• Iomega StorCenter ix4 - 200 d rebuild failure

  I have a StoreCenter ix4 - 200 d, which had a disk failure. I bought another disc with the same model number and I replaced the damaged drive. During the restart of the screen on the StoreCenter says "disk 1 requires overwrite confirmation", but when I go to the dashboard, there is no confirmation message, and he has not lost all records storage and shows 0 stored data.

  It sounds like the raid/pool failed. If you retrieved the data and not concerned about this on the NAS, you can try a factory reset. It is data destructive but should rebuild your raid and allow you to use it again.