Receive error message "Installation failed to Intialize" attempts to load the application manager

Similar Questions

• I try to install the update of PS CS6 can read files camera raw Nikon D800.  The exe file fails and says trying to install the application manager.  I did it and the update still does not work.  Now what?

  I try to install the update of PS CS6 can read files camera raw Nikon D800.  The exe file fails and says trying to install the application manager.  I did it and the update still does not work.  Now what?

  update by downloading the files directly and then apply them: http://www.adobe.com/downloads/updates/

  If this fails, attach a screenshot of the error message if it is in English.  otherwise, quote it.

• How to fix 'error message' installation of windows services stops working during the installation!

  Windows Vista Edition Home Premium

  service pack 2

  Toshiba

  satellite A135

  32 - bit operating system

  Hello

  1. Once you get the error message?
  2. What is the full error message?
  3. what program or the application you are trying to install?
  4. have you done any software or hardware changes on your computer before this problem?
  5 is the issue limited to a particular application?
   
  To work on the issue, check the following link.
  How to solve problems when you install or uninstall programs on a Windows computer
  
  http://support.Microsoft.com/kb/2438651
   
  See the steps mentioned under Windows Installer issues in the RESOLUTION section.
   
  Check if it helps.

• Receiver error message: network connection has timed out when downloading the software iTouch 5.01.

  Original title: software update for my i touch

  I am trying to download the 5.01 update software for my Apple i-touch. However, the download is so long that I get an error message indicating that my network connection has expired and the downlopad do nt go through. How to solve this?

  Hi Gary,.

  What virus protection software is installed on the system?

  I suggest you temporarily disable antivirus software (and any other security such as anti-malware software, etc.) and the firewall on the computer and see if that fixes the problem.

  Note: Make sure that you enable the antivirus software, other security and firewall after the test programs.

  If you still experience the problem, you could get in contact with Apple support for further assistance.

  Apple support

• After you install Internet explorer 9, receive error message "failure of configuration updates changes recovery" BUT the update history shows successful

  Running Windows Vista and it is impossible to update to Explorer 9.  Also successful shows in "installed updates", but does not appear in the option "uninstall update"

  Hello

  ·          Are you able to access Internet Explorer 9 and use it?

  ·          When exactly do you get this error message?

  ·          You get this error message every time that you start the computer?

• Receive error message whenever I do a right click on the taskbar

  Original title: Hello, I m using a HP DV5000 Laptop and I just came across this problem when I right click on the taskbar... you can help

  Description:
  A problem caused this program blocking interact with Windows.

  Signature of the problem:
  Problem event name: AppHangXProcB1
  Application name: explorer.exe
  Application version: 6.1.7600.16450
  Application timestamp: 4aeba271
  Hang Signature: 119
  Hang Type: 16
  Waiting on the name of the Application: igfxtray.exe
  Waiting on the Version of the Application: 8.14.10.1930
  The system version: 6.1.7600.2.0.0.256.1
  Locale ID: 1033
  Signing of additional blocking 1: 119a8e1cbd110de39bfb4c0c39446578
  Signing of additional blocking 2: 1cb0
  Signing of additional blocking 3: 1cb0d9c238467dbf81c2029ce2e609b9
  Signature of blocking has extra 4: 119
  Signing of additional blocking 5: 119a8e1cbd110de39bfb4c0c39446578
  Signing of additional blocking 6: 1cb0
  Signing of additional blocking 7: 1cb0d9c238467dbf81c2029ce2e609b9

  Description:
  A problem caused this program blocking interact with Windows.

  Signature of the problem:
  Problem event name: AppHang XProcB1
  Application name: explorer.exe

  Waiting on the name of the Application: igfxtray.exe

  Your Explorer crashes due to igfxtray.exe which is part of the Intel drivers. So update the Intel driver, please:

  http://Downloadcenter.Intel.com/default.aspx

  If this doesn't fix it, use msconfi.gexe and disable the igfxtray.exe.

  André

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• I tried to update and it says get the application manager.  When I do, it will fail to load the application manager.  What should I do?

  I n 't know what to do then.  I uninstalled and tried again.  Nothing works.

  I ended up update. I uninstalled and restarted my Mac then used the

  cleaning and restarted again and then installed creative cloud again and it

  time, he was beautiful.

  Penny

  Friday, February 27, 2015, Jeff A Wright [email protected]>

• Hi, receive error message: Error 1935 when trying to install adobe photoshop elements 11. An error occurred during the installation of Assembly component {9F81AF1-0E47-DC99-A01F-C8B3B9A1E18E}. HRRESULT:0 X 80070057. Can anyone help? I use windows Vista an

  Hi, receive error message: Error 1935 when trying to install adobe photoshop elements 11. An error occurred during the installation of Assembly component {9F81AF1-0E47-DC99-A01F-C8B3B9A1E18E}. HRRESULT:0 X 80070057. Can anyone help? I use windows Vista and the DVD is to this system. May this be the cause?

  Error 1935. Assembly Microsoft.VC80.CRT component | Install | Adobe Creative Suite 5.5, CS5, CS4 | Windows

• While the plug-and-play was still there at all, and I tried to go I still receive error message 2. could not locate the file.

  Here's the situation.

  First of all only started to the top of my Asus to find was no sound. Following up to plug-and-play service has not started. It is now removed apparently.

  Here are the solutions I tried, in and out of safe mode:

  While the plug-and-play was still there at all, and I tried to go I still receive error message 2. could not locate the file.

  In CMD sfc/scannow reached 32%, then breaks down, saying: it finds corrupted files, but could not fix.

  It Startin via msconfig did not work.

  Tried to go through Device Manager, which is completely empty for some reason any.

  System Restore is restoring before this problem. When you attempt a restore, plug-and-play service is not returned to the existence, defective or otherwise.

  I knew, but there may be malware, mutiple scans with several services did not find anything.

  I tried to contact microsoft help and they might suggest only I have upgraded to windows 10. Tried several times, and he has failed to be upgraded, every time. For the most part just download windows 10 and then by restarting the computer as if nothing happened. Any ideas on how I can fix this?

  Hello

  Welcome to the Microsoft community. I will certainly help you with the problem you are experiencing.

  I would like to ask you:

  • You are running Windows 7 or Windows 10 on your PC?
  • When was the last time it was working fine? Remember to make changes to the computer before this problem?

  Given that you are unable to complete the scan of SFC and Task Manager is empty, usually reinstall or do a repair install is the best choice of action. However, we can try to fix these files and check if that helps. To do this, refer to the steps below:

  1. Open the start menu and type "cmd".
  2. Right-click on the command prompt and click "run as administrator".
  3. Type the following commands and press ENTER after each.

  DISM.exe / Online/Cleanup-image /Scanhealth

  DISM.exe / Online/Cleanup-image /Restorehealth

  After you run these commands, restart the system and check.

  You can also view,

  Difficulty errors of corruption of Windows by using the DISM tool / System Update Readiness

  https://support.Microsoft.com/en-us/KB/947821

  If you are using Windows 7 and have the product key for this. You try to run an upgrade in Place to fix all the corruptions.

  Refer,

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

  Hope this information was useful.

• How to solve the message "Installation failed to Initialize"?

  I've used Adobe products for over 20 years. Now I'm really stuck, and cat live has not been helpful at all (no answers to my questions, just instructions ignoring what I'm saying, which is in fact already tried all of the suggestions/instructions, and they did not work). My OS is Windows 7, professional reception. I bought CS5.5 Design Premium on a CD and tried to install it. The CD seemed to work; the installation started. Then nothing happened for more than an hour, so I canceled the installation and rebooted my computer. Now when I try to install, I get a message saying 'Could not initialize Installation' and I have to watch the whole show on the link Support Advisor. When I do this, the Manager finds no error. I can't find the Setup logs. Chat live suggested that I change the ODBE (or something like that) to the 'old' file, and then try again. It did not work. I downloaded the Application Manager. This did not help, either. Copy the contents of the CD to the desktop did not better results. Live chat suggested that I have download the trial version and then try to use my legitimate serial number. I said that it does probably not either, because the first attempt of CD issues had not been resolved. Nine hours later the free trial download is complete, and after all this, I got the same failure to initialize the message. I answered to my 'record' and, so help me, the representative of the customer even replied, telling me to download the trial version. In other words, it completely ignored the fact that I had tried and it didn't work. I looked on the forum and there was a discussion on this "initialization failed", but the discussion was completely in German, which helps not at all. I hope that someone on this forum can help me in this process; This software is mega expensive and should come with better support.

  Yes, it seems that if you run in a permission issues when the Setup program attempts to write to your disk.  I recommend to create a new local administrator account and try the installation under this account.  Alternatively, you can consider running the installation in a selective startup upwards to minimize interference from other applications or services.

  The following documents should help if you need any indication as to the following steps:

  Create the local admin account. Windows 7, Vista - http://helpx.adobe.com/x-productkb/global/create-local-administrator-account-windows.html

  Restart Windows in modified mode | Windows 7, Vista - http://helpx.adobe.com/x-productkb/global/restart-windows-modified-mode-windows.html

  If this fails, you can also try to log in using the built-in Administrator account (Windows 7 and Vista) - http://helpx.adobe.com/x-productkb/global/log-using-built-administrator-account.html , and then perform the installation with the built-in Administrator account.  I recommend the creation of a first local user account well only in case your existing user accounts have had their permissions compromised.

  If you can answer it please get back with the results, it would be appreciated.  If you have additional questions about the steps listed please do not hesitate to reply to this topic as well.

• While the installation of Service Pack 3 error message comes as "Bullxp is not a WIN 32 application.

  Original title: installation of Service Pack 3

  IAM using windows xp service pack 2 for Bull XP software. Now, I want service pack 3 to my Zune connection. I downloaded SP3 but that you can not install. Error message comes as Bullxp is not a WIN 32 application. So my question is. What is win32 application. ?  Will I get updated by the Download Center or else are up to so that I can go?

  Hello

  The error message "not a Win32 application invalid" is displayed on the Windows computers and can indicate a variety of problems. Win32 is part of the core of the Windows operating systems and programs installed on your computer must communicate with the kernel in order to work properly.

  Follow the steps in troubleshooting these KB articles and check if that helps:

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717

  How to troubleshoot an installation fails on Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950718

  You can also post your query to the Bullguard Forum and check:

  http://Forum.BullGuard.com/Forum/

• What does this error message "download failed. Network failure. »

  For weeks, I receive the error message "download failed. Network failure. "for a particular item in a folio. I looked for answers to what it means, and I have not found information that helped identify the reason why this error continues to display.

  Article is most of the features-heavy in this folio, but only with buttons that change state of the multi-state objects and I have now re-created from scratch 6 times - this last time, that I've updated what he producer Folio every time I place an image, whenever I have apply a button or a multi-state object It was quite tedious.

  Today, it has been updated every hour until I apply a hyperlink to text and download failed. Whenever I met this error message, was after something different, there is no common action or point where the update fails.

  It became very frustrating because I have trouble shooted as much as I can, and my client is also frustrated that this keeps not carry out the project.

  Is it possible for one of your support team please take a look at the article and let me know if something escapes me?

  I'm pretty desperate at this point, it would be really grateful for the help.

  Thanks in advance.

  This means that the network didn't :-) No seriously, it happens all the time, just keep clicking on 'Retry' which will continue the download without having to start

• When I try to log the p2p soulseek site, I get the error message "connection failed: socket error.» change the connection settings. How can I fix it?

  "socket error".

  When I try to log the p2p soulseek site, I get the error message "connection failed: socket error.» change the connection settings. How can I fix it? Is - this type of error called a winsock error?  It keeps happening to me on this site. What I've read, it happens when you make changes to a program before concluding that under its weight. Could it happen because I'm deleting files, I don't think that will be completed while the other files are D/Ling? That's what I'm doing wrong? I found a solution to correct an error in Winsock that is to enter the "command prompt" and type "netsh winsock. Will this work? (I'm sorry I have so many questions in this post, but I have had TO KNOW!!)

  Hello

  I suggest you send the question here for best support about the issue.

• I get the error message: maigration failed to transfer when I install Windows updates. How can I fix

  I get the error message: maigration failed to transfer when I install Windows updates. How can I fix

  Hello

  Thanks for asking!

  You cannot install updates Windows and error migration was not able to transfer.

  The problem can occur if the update of the components are damaged.

  Is the message of exact error that appears?

  I suggest you to reset the update components and check if the problem persists.

  See the site:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756/

• Received calls from Microsoft saying that I received error messages. I have phone #.

  Received phone call telling of Microsoft and they were receiving error messages. I have his phone number of caller ID.

  Hello

  It's a scam.

  Microsoft does not contact you unless YOU have made prior arrangements with them to do.

  There is an article in the link I'm you provide at the end of this one

  Read this Information from Microsoft:

  "Avoid scams to phone for tech support.

  http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx

  Don't be fooled of unsolicited calls. Don't provide personal information.

  Here are some of the organizations that cyber criminals claim to come:

  • Helpdesk Windows

  • Windows repair center

  • Microsoft technical support

  • Microsoft technical support

  • Windows Support Group Technical Department

  • Microsoft Research and Development Team (team of Microsoft R & D)

  Either these so-called "Microsoft" Tech companies want to sell you a worthless software, or remote access to your computer to try to steal your credit card and bank information and also achieve an identity theft on you.

  See you soon.