Receiving the planning server connection error when validating BusinessRule.

Similar Questions

• HP 5520 server connection error when you try to activate ePrint

  Have been troubleshooting hours +++ printer is on the same wireless network the MAC version 10.6.8 can I print from the Mac.  ePrint Setup does not work.  where can I get the e-mail address of the printer?  What should I do?  I tried in vain to use the address of the printer in my browser - can't find it.  Help, please.

  I understand that you're having trouble getting web services to activate.
  Follow these steps.
  
  1. open the internet browser type printer IP address.
  2 should bring you to the status of the printer page.
  3. Select the tab network at the top.
  4. left side select network.
  5 and then address of network selection left hand side (IP)
  6. under DNS address Configuration select manual DNS server.
  7. for favorite enter 8.8.8.8
  8. for alternate enter 8.8.4.4
  9. Select apply. You can get a warning saying that this could break the connection which is very good.
  10. turn the printer off for about 30 seconds and then try to enable web services.
  
  Let me know how it goes.

• Server connection error

  Series of photosmart HP 7520. -J' am trying to scan a document to send and keep getting the message "server connection error" despite the fact that WiFi is showing as connected. I'm not very good with technology! Can anyone help please?

  Hello Alleycat1. I understand that you have a problem scanning to e-mail, about the connection to the server. If you follow the troubleshooting in this HP document, the issue should be resolved, as it contains troubleshooting for this error message: http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?sp4ts.oid=4022328&spf_p.tpst=kbDocDisplay&spf_p.prp_kbDocDisplay=wsrp-navigationalState%3DdocId%253Demr_na-c02524629-11%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  If these steps do not resolve the problem, I would like that you follow these troubleshooting steps (assuming you're the App on the front panel of the printer):

  1 Select the Web Services on the Panel forward, then settings.
  2. Select "delete web services" and wait as the services to be eliminated.
  3. Once finished, you will return to the home page.
  4. Select the Web Services icon on the printer and go through the steps of installing Web Services once more.
  5. you will receive a more recent code. Later, you can use this code to add the printer to your account eprintcenter.com hpconnected.com / using this code.

  6. you can, or that you may create another email address.

  7. try a different scanning to e-mail using the app.

  Please notify me when all troubleshooting is done, and I'll continue to help you if necessary.

  Mario

• Server connection error:-1 there is a problem connecting to the server... hp photosmart 5510

  HP photosmart 5510 e - while a printer B111a

  Windows vista 32-bit

  connection error message-Server error:-1 there was a problem connecting to the server, press Retry or ok to continue

  No changes have been made to my operating system

  Try to add new applications with eprint center of my Compaq Presario CQ60 laptop to my HP printer. Computer tells me that the new applications are there and ready to use, but printer says 'server connection error "? I followed all the instructions to connect to the wireless router, but I'm not sure how to connect to the "Server"?

  The steps below a usually resolve the problem you are experiencing:

  1. unplug the power cord at the back of the printer.

  2. unplug the power cord at the back of your router (and the modem, if they are separated from the router).

  3. wait 20 seconds, then plug the router (and the modem, if necessary) in.

  4. wait for 30 seconds, then plug the printer back and power.

  5. press the button on the front of the printer ePrint, and it should try to connect to Web Services again.

  These steps usually fix the problem, but if it persists, you can try definition of network information static for the printer (which is sometimes useful to stabilize the ability of the printer to get outside of your network to the internet):

  1. tap the wireless at the top of the screen of the printer and note the IP address.
   
  2. Enter the IP address in the address bar of a web browser on a computer and press on enter or click the go button browser.
   
  3. the printer status page must be open.  Click network in the upper part.
   
  4. click on networking on the left.
   
  5. Select the Proxy settings.
  Note: If you are prompted for a redirect, click OK.  If you receive a certificate warning, select the option that allows you to continue anyway.
  If you receive an internal system error, refresh the page until it loads the proxy settings.
   
  6. check that all fields are empty.  If they are not, make them disappear and make sure that the Proxy Server requires authentication is unchecked and click on apply.  You should get a success message.
   
  7. click on the network address (IP) on the left.
  Note: If you only configuring IP address and DNS address with a yellow note Configuration, refresh the page until it loads completely.
   
  8. leave automatic IP IP address Configuration.
   
  9 change the DNS address to the manual DNS Server Configuration.
   
  10. enter manual for the manual preferred DNS Server 8.8.8.8 and 8.8.4.4 for auxiliary DNS.
   
  11. click Apply and you should get a success message.
   
  12. turn off the printer for 30 seconds and then turn it on again to force the new settings take effect.

  Let me know if you have any additional questions. Thank you!

• B210A Photosmart - server connection error and does not connect to the wireless router

  I have problems setting up and to connect my router to my new printer b210A. Everything goes well with the initial configuration, and when asked to connect to the network at the start, it works. Then he said that the printer requires updates, downloads of updates, reboots, asks me if I want to activate eprint and as soon as I said 'Ok', I get a "the server connection error" and it is then no longer connected to the network. When I get out of the "server connection error" screen and attempt to reconnect to the network, he says 'Success', prints a Test report wireless, but never connects.

  It's the 2nd printer that I have had in a week, given that the person of HP online chatting told me my first printer had problems of "hardware", after experiencing the same problems and I'll be recommended. So - I did, and now I'm running into the same issues. The number of 800 was NO HELP - after recommended I have unplug and reconnect, then telling me there were server errors (when the printer was not connected to the network).

  We will set an IP address of the printer with a special focus on DNS domains:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). You can find the beach DHCP from the router using its internal settings page or in its manual. Use the CD that came with your router or type the IP address of the router (ends para.1) in a browser.
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway

  -For the first DNS 8.8.8.8 and 8.8.4.4 for the second use.
  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

• HP Officejet 6600: Connection error when you try to use the Apps?

  I am trying to use the applications so that I can scan to e-mail.  When I try to open apps, I have a connection error.  I have run the wireless network test and all pass and the signal is excellent.  The eprint works very well.  I can't understand why I get a connection error when the wireless is configured and passes all the tests.  I tried scanning HP doctor thing and could not help solve it.  I'd appreciate any help.

  Thank you!!

  I had to delete web services and then add it again. Seems to work fine now. Thank you!

• Web Services problem - server connection error

  Hello world.

  When I try to enable Web Services, I get an error. I am connected to internet (WiFi) and the connection is ok.

  The error is:

  Server connection error

  The printer could not connect to the server. Check the internet connection and try again, or enter a proxy address.

  I do not have a proxy, and the internet connection is ok! Why do I have this problem?

  Thank you very much.

  We will set an IP address of the printer:
  
  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). You can find the beach DHCP from the router using its internal settings page or in its manual. Use the CD that came with your router or type the IP address of the router (ends para.1) in a browser.
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the bridge and the first DNS. Let the second white.< the="" dns="" could="" be="" your="" problem.=""  if="" this="" does="" not="" work,="" try="" google's="" dns="">
  -Click 'apply '.
  
  Now, stop the router and printer, start the router, wait, and then start printing.
  
  After that, you will have to redo 'Add printer' using the new IP address.

• 403 server connection error.

  I have a HP Photosmart 5520 connected wireless to a MacBook Air. (Wireless through an Airport Extreme) Everything worked fine and now when I try to scan to e-mail, I get a "Server Connection Error 403." I downloaded the latest software drivers Apple to HP and no change. Scan to computer works, but not scanning to e-mail. Any advice greatly appreciated.

  You may need to perform a full semi or partial reset on the printer. This will completely reset the printer to the way it was when you bought it. However, I can't post those steps on the forums because it is against the policy of HP.  If you are interested in these steps, let me know and I'll send you a private message with them in it.

  Thank you

  Kyle

• Server connection error:-1

  I restrained this forum and I tried everything I could find and has been suggested.  I can simply not the web-based applications to connect.

  1. I have restored factory settings

  2. rebooted router

  3. Enter the IP address printers 192.168.1.84 and began to establish the connection.

  4. Add a static DNS 8.8.8.8 and 8.8.4.4

  5. I restarted everthing in the House.

  I always get the same exact error for the server connection error:-1 when I try to access the web based apps.

  These used to work fine and my daughter loved print his page 'of the day. "  It has just stopped one day of work and no matter what I try it will not connect.

  However, the printer works fine on PC Windows 8 and the iPad or the iPhone.

  Please help as we would like to again access coloring Disney pages.

  Well, try to change the network ipv4 only protocol

  you need to get the ip address of the printer first, and then open any web browser, then try typing the ip address of the printer on the url, after that go to the network tab > networking > network protocol > check on ipv4 only > apply

  If it does not work.

  try going into the menu of web services and delete web services and then re-enable back.

  PS: it will remove the ePrint printer address, you can no longer use the same address of electronic mail of the printer, if customize you it.

• A connection error when I try to launch games for windows.

  A connection error when I try to launch games for windows.

  It is said...  Connection error. Cannot start the program. There may be a problem with your Internet connection or the Live service.

  If you have problems with an Internet game, look at the following article.

  KB 2528246 - troubleshoot games online using Internet Explorer
  http://support.Microsoft.com/kb/2528246

  They have a lot of suggestions which may help your question.

  Sincerely,

  Marilyn

• Server connection error: 403

  I need a solution for the server connection error: 403. I know that there is a work around.

  Hi Straightlake, I want to help you with the problem you are experiencing. Could you please tell me what printer we work with as well as the operating system on your computer?

  Thank you.

• Failed to install IMAPI_XP_SRV2003_x86.exe on Windows XP Pro SP3. Receive the message that is not a valid Win32 program.

  Original title: imapi.

  Failed to install IMAPI_XP_SRV2003_x86.exe on Win XP Pro SP3. Receive the message that is not a valid Win32 program. I downloaded the MS program two times with the same results.

  Hi tugadaq1,

  Your computer is connected to any domain or network?

  If your computer is in a domain environment, I recommend you ask your question in the forum MSDN for assistance:

  http://social.msdn.Microsoft.com/forums/en-us/categories

  Hope the helps of information.

• HP Photosmart 5520 411 server connection error

  Hello

  Does anyone know how to solve Server connection error 411.?

  I have a Mac, and until recently still for more Mac Wireless scan was fine. Without wire is connected and the computer scan is enabled. The e-mail address and the PIN is correct.

  Thank you very much

  Thank you, turning the router waits for at least 60 seconds and turning them back on and then turn on the printer works!

• I'm trying to reinstall CS2 on an XP that has never been installed. The download works fine, but will not accept my serial number to activate. I copy and paste from my account to ensure accuracy. Continue to receive the serial number incorrect error. What

  I'm trying to reinstall CS2 on an XP that has never been installed. The download works fine, but will not accept my serial number to activate. I copy and paste from my account to ensure accuracy. Continue to receive the serial number incorrect error. What would be my next step to get this race?

  CS2 (or earlier version) activation server has disappeared, then read below

  You MUST use the special number on the page, not your original serial number

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

• I get the "invalid personalization information" error when I start my photoshop cs8. I can't find my disc of origin of re - install, but do not have the serial number. Can I download a trial version and then enter my serial number?

  I get the "invalid personalization information" error when I start my photoshop cs8. I can't find my disc of origin of re - install, but do not have the serial number. Can I download a trial version and then enter my serial number?

  If this is the first version of CS, then you will need to check the following.  In my view, that it applies to CS also even if it specifies CS2...

  Error: Unavailable activation server | CS2, Acrobat 7, hearing 3 - l http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm