rechargeable batteries is completely cleared before recharging?

Similar Questions

• non-rechargeable batteries

  I like sandisc is that you can use at high altitude. I am looking for a new and they all seem to have rechargeable batteries which is difficult to do a long trip. Are there other options of battery?

  For the record, I think that most mp3 players now use a SSD flash memory now so they should be good with shock and high altitude. It was the great thing about my old 256 MB - solid state memory SanDisk mp3 player and he ran on a single AAA battery, so I could just keep a few extras in my pocket or buy them as needed.

  Personally, I would recommend that you watch the Sansa Clip + as it has a plug type as well as a standard microSD card slot.  I have a rocket and the only thing I HATE is the port owner.  I can't load it with anything except the OEM cable. the clip + has a normal mini-USB port for most mobile phone chargers should (have not tried well) work with her including phone chargers 'emergency' that work on normal AA batteries.

  Something like this should work on the Clip / Clip +:

  http://blkbrytech.blogspot.com/2008/09/i-love-little-check-another-posts.html

  When you go to the store, look at this thing in the accessory section of mobile phone, probably to Motorola or Blackberry phones (I think both use the same connector miniUSB as Sansa Clip / Clip +)

  Alternatively, if you really want the features of the "rocket", find or build yourself a cell phone charger with a USB female port and wear it around the cable of the rocket.  I can confirm the "rocket" will play and charger at the same time, I often recharge with a generic USB wall charger.  You just need the Sansa cable to connect USB - A port of Sansa.

  If you only want to mp3 (not video) I seriously would you recommend to go with the Clip +, if I was looking for now I would choose the clip + during the "rocket".  It has a slot for more memory microSD (it's a must for me - I want to keep this player for a long time) and it also has a standard mini-USB plug, so it is really easy to take anywhere.

• Should I drain my battery before recharging?

  How many times can I charge my battery? I have to wait until he's almost dead before recharging?

  I don't know how many fees for the duration of life, but I got my 2 years and charge at least every two days. And, no, no need to wait - I load when it comes down to 50-60% usually (except if I forgot).

• IOS XR - How to show the complete changes before committing?

  In IOS XR, there is an order to see the complete changes before committing? For example:

  RP/0/0 / CPU0:INET #show running-config prefix-set MYPREFIX
  Mon Oct 24 15:06:16.288 ARBUE
  all of the prefix MYPREFIX
  the 10.0.0.0/8 32,
  172.16.0.0/12 32,.
  192.168.0.0/16 32
  end-set
  RP/0/0 / CPU0:INET #Configure terminal
  Mon Oct 24 15:06:30.427 ARBUE
  RP/0/0 / CPU0:inet (config) #no set prefix MYPREFIX
  RP/0/0 / CPU0:inet (config) #show the configuration
  Mon Oct 24 15:06:38.767 ARBUE
  Building configuration...
  !! Configuration of the IOS XR 6.1.1
  !
  no set prefix MYPREFIX
  end

  But I want to see the full content of all of the prefix before validation, something like this:

  RP/0/0 / CPU0:inet (config) #show configuration?
  no set prefix MYPREFIX
  ! the 10.0.0.0/8 32,
  ! 172.16.0.0/12 32,.
  ! 192.168.0.0/16 32
  ! - cover

  Ditto for the political course and for the BGP neighbors. Thank you.

  You can get a diff of the changes, like this:

  lab01(config)#no prefix-set MYPREFIXlab01(config)#show commit changes diffWed Oct 26 15:56:21.322 CESTBuilding configuration...!! IOS XR Configuration 5.3.4 !- prefix-set MYPREFIX- 10.0.0.0/8 le 32,- 172.16.0.0/12 le 32,- 192.168.0.0/16 le 32- end-setend

• I would like to know if Microsoft Wireless Desktop 3000 also works with rechargeable batteries

  Hello

  I just bought a Wireless Desktop 3000 (keyboard + mouse).

  I would like to know if it also works with rechargeable batteries for normal alkaline batteries (batteries recommended) are 1.5 V batteries (NiMH) are only 1, 2V.  The keyboard uses 2 batteries and the batteries in the mouse 2 also.

  Thank you

  Lorant

  Original title: Microsoft Wireless Desktop 3000

  Hello Lorant,

  Thanks for posting your question on the Microsoft Community forum.

  It is generally recommended to use the batteries that are similar to the integrated batteries. However, you can try to use rechargeable batteries, but make sure that the electrical parameters are not much different.

  Warning : Risk of explosion if battery is replaced by an incorrect type. Use by replacing only with the right size and type of batteries (alkaline, carbon zinc, or zinc chloride).

  For more information, you can consult the following product guide for Microsoft Wireless Desktop 3000: product guide

  Hope this information is useful. Please feel free to post any of your Windows problems, we will be happy to help you.

• Rechargeable batteries safe for wireless keyboard?

  I was wondering if someone could help me answer the following question. Is it safe to use rechargeable batteries with my HP Deluxe wireless keyboard + mouse?

  P/N: KZ256AA REV. 1.3

  S/N: CNP12903 T5

  Any help is appreciated.

  Thank you!

  Hello

  No problem at all. The voltage may be a little more down, but ok.

  Kind regards.

• backup of the complete phone before repair

  My iPhone SE earphone is damaged as a result of certain dust went inside. I wish him well more (not even 2 months)
  I'll give this to fix it, but I have to take a complete to the top of my phone before I give him.

  I made the back upward using settings-> iCloud-> backup

  I want to have a full backup (all that I should be able to restore photos, emails etc...)

  Please indicate the extensive safeguarding measures.

  If you want to back up all your data, including your health data, you must make a backup of encrypted. iCloud will ensure the encrypted backup, but you must understand all iCloud backup against everything iTunes backup. You might want to take a look at this support on safeguards document to understand all this.  On safeguards for iOS - Apple Support devices

  If you choose iTunes, then also take a look at this support document on the encryption of an iTunes backup. Read the whole thing, because if you have forgotten your password for the encrypted backup, you must delete it and restore the unit to the factory.  On safeguards encrypted in iTunes - Apple Support

• Firefox 30.0 not completely clear memory Cache

  I run the latest version of CCleaner before every time I put my computer to sleep or shut down and now after upgrading Firefox to 30.0 I noticed there are still files in the Cache of Firefox, which has not been deleted. I have my browser set to automatically erase my history. I noticed this before in other versions of Firefox that I've been updated, but went away when new patches are released.

  That are probable images you see in the Windows Jump list that show if you click on Firefox on the Windows task bar.
  You will need to disable the jump list if you don't want Firefox to generate these images.

  • topic: config page: browser.taskbar.lists.enabled = false

• How to make my old iphone 5 clear before sale

  Please guide how to erase my old 5 Iphone pre-sales

  Hello. Here's a helpful article:

  What to do before you sell or give away your iPhone, iPad or iPod touch - Apple Support

• Shift register clear before rerunning the VI

  I have this VI very simple read the voltage of an acquisition of data until I stop the loop, then it saves the data to a .wav file.

  My problem is: whenever I stop the VI, I expect the registry to shift to clear. But if I restart the VI it saves the old data in the shift register and the new data in the .wav file. I want to just the new data when I run the .VI, without having to close the program each time.

  Help, please.

  Right-click on the control to the table, and choose "clear picture" (or any option os tht called) and try again. It's a cluster of an array of types of waveform data. (Later), you can right-click and choose "display as icon".

  Ben

• Error 1500 "another Installation is in progress you must complete installation before continuing this one ' when trying to down load a program always appears. Unable to complete the download

  Error 1500

  Hi Frank,.
  Welcome to Microsoft Windows Forums!

  I would like to gather more information about the issue.

  Ø summers - get you this error during the download or installation?

  Ø what application are you trying to download?

  In the meantime, you try these methods.

  Try to put your computer in clean boot mode and check if the problem persists. To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. This article describes how to solve problems in Windows Vista or Windows 7 by performing a clean boot.

  Steps to put your computer in a clean boot:

  1. click on Start
  2. type msconfig in the Search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click continue.

  1. in the general tab, click Selective startup.
  2. under Selective startup, clear the Load Startup items check box.
  3. click on the Services tab, select the hide all Microsoft Services check box, and then click disable all.
  4. click on OK.
  5. When you are prompted, click restart.
  6. after the computer starts, check if the problem persists.

  NOTE: TURN ON YOUR COMPUTER TO A NORMAL STARTUP AFTER TRYING THE STEPS ABOVE.

  Click Start, in the search box to start, type msconfig and press ENTER.
  Select Normal startup, and then press apply and OK

  How to perform a clean boot procedure to determine if background programs are interfering with a game or a program that you currently use
  http://support.Microsoft.com/kb/331796

  Thank you and best regards,

  Bindu S - MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum and let us know what you think.

• videos must be completely charged before streaming

  Well, I had this problem for a few days. Doesn't matter where I want a video to be played, he needs a long time to first to load the entire video before actually playing it.

  I already tried to uninstall the flash player and reinstall, but that has not worked.

  Some info:

  Using Windows 7 and Internet Explorer 8. I just installed java on my computer a little there before this problem started.

  I hope you guys can help out me, I have already searched the web but have not found the slightest suspicion.

  Daniel, did you reboot (restart) your computer after you have installed the latest Java?

  So far, it seems that you have the right Flash Player and Java, so I will try to determine why you can't view the videos.

  I would like you to try this: go into manage add ons and the entrance to 2SSV Java, disable it and then go to youtube and see if you can view a video. Let me know what's happening and if you get a message.

  Thank you

  eidnolb

• Your excellent tutorial is not exactly what version of GPG to install - complete, clear, or vanilla?

  When I go to the link for GPG (ie - Gpg4win), I gives me several options for download. I can install the full version (30 MB), which comes with Kleopatra and Compendium, the light version that doesn't include Kleopatra and Compendium, or can I just install the vanilla version that contains only Gpg4win with GnuPG component only. So should which version I install for use with Thunderbird? I'm inclined to download the vanilla version and then download Enigma for use with Thunderbird, but I'm not sure.

  I'm sure that version vanilla that suit you. I can't be sure because it's been long that I finally installed it in Windows (which I have with me here), and here on Linux component gpg all comes standard.

  AFAIK, you don't need Kleopatra, and I've not heard of, so presumaby, never used, Compendium.

• HOW TO COMPLETELY CLEAR COMPUTER SYSTEM NOT RESTORE

  I NEED TO KNOW HOW TO MAKE MY COMPUTER AS IF IT WAS WHEN I BOUGHT IT. IT'S NOT THE SYSTEM RESTORE FEATURE I WANT IT LIKE THE DAY I TOOK IT OUT OF THE BOX

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• Treo 755 p spontaneous restart & completely clear of all THE Contacts

  Greetings: last week, I noticed that my Treo 755 p spontaneously rebooted and erased all contacts. When I HotSync to get the news, everything syncs properly except for Contacts.  The following message is from the synchronization log.  Please tell me that there is a simple solution.  Thank you

  Outlook contacts
  Failure of the attempt to open the database.
  OLERR:02 - 0001
  OLERR:0 D-0004
  OLERR:0 D-0001
  -Not synchronized
  Failed to sync Outlook Contacts

  OLERR:15 - 0002
  OLERR:01 - 0001
  Outlook tasks
  -Fast Sync

  The error you are reporting is a common mistake and will not affect anything.

  Here is a link to article explaining the error.

  http://KB.Palm.com/wps/portal/KB/common/article/44937_en.html

  Are you sync'ing your current phone for the same user in Palm Desktop as an older device name?
  If you are, this will cause problems on the new device. When you synchronize the device, it records the device settings, applications, 3rd party, preferences, etc. in the backup folder in the folder on the PC username. When you synchronize the new device it copies the content of the backup for the old device folder in the new device. This will cause corruption in the settings of the new device, which causes erratic behavior of the new device.

  Get error messages when the phone freezes up?