Recommended for Y2 tab 13 wifi router?

Similar Questions

• Cisco recommended for the GRE VIA IPSEC router.

  Hello world

  I intend to connect our two remote locations via IPSEC tunnel, looking for the cheapest option available for the router options.

  Do you have any good recommendations?

  Have a nice weekend!!

  Very appreciated

  Hello

  There is 1 that I love so much, it's 892fsp of Cisco.

  It has 8-port switch, you can make l2tp vpn, free will, love, ips, zbf...

  I hope this helps.

  Thank you

  PS: Please do not forget to rate and score as correct answer if this answered your question

• Need a recommendation for a second firewall router

  I have currently a second router connected to the LAN port of the #1 router/WiFi in order to create a firewall between the Local area network of my #1 WiFi router and a PC which is connected by a cable Cat5 to the second router. This second router has no need of WiFi and only needs to support a PC, to call the parent PC.  For proof of concept that I used an old router, GigaFast EE400 - R 10/100 Mbit / s, it works but I think it slows my PC parent.

  So, I would like to replace this old second router with something reasonable that is not slow things down, but provides a firewall between LAN and the parent PC.

  I thought maybe around $100 - maybe more if necessary.

  Router 1 # is a M142WR - Gen31 Verizon ActionTec provided

  It is not uncommon to see that the ISP supplied routers do not have the ability to assign static to the WAN interface, they only allow DHCP.

  What can be useful, it is if you can configure the DHCP server to assign customer-specific DNS servers, so that the DNS relay router is not used. Unfortunately, even once provided ISP routers are often locked, and you cannot make these settings.

  Yes, you can configure your computer to go to an external DNS instead of use the router of the client, it is sometimes quite effective, but the main thing is to get rid of the relay using a scenario of relay that you had as I've found it can be very slow.

  I only suggested Google like her I know by default. Speed DNS depends a lot on the network to which you are attached. It of a bit technical, but reference RCMP DNS will tell you this that the DNS the fastest that YOU can connect to. I know that BT router DNS servers are slow, but the BT DNS network is the fastest available for me.

• Configuration suggestions wifi router for the best downloads for Folio Builder

  I was facing problems where my wifi router is not provides maximum download speed to download folios. Here I was faced with failure of network errors. All advice.

  Thanks for the tip of Bob. I went over the wired connection. The bug that

  has been bad, I hope that this was not the hardware, but the software as I

  guessed. Sometimes the characteristics of company boasts off fate a real

  pain. Thanks I'm fine now.

• a reason for adding the station wifi?

  I have a mac additional wifi station and I got it in my living room where, on the net, I get a lot. the time capsule that broadcasts my wifi is in the office down the Hall.

  adding the station wifi in my living room will help with a question that mail get hung up and not updated?

  This will help the speed of my connection?

  I originally bought it for the trip, but I'm not find much use for it on the road and am thinking of using it at home.

  THANKS for any help

  adding the station wifi in my living room will help with a question that mail get hung up and not updated?

  Unlikely.

  This will help the speed of my connection?

  Maybe, probably not.

  Is your Mac faster when near the time Capsule, when in the living room?  There is a good chance, with a local access point will help.

  When you look at the WiFi menu bar icon.  You have full bars (good), or is it partial (perhaps a repeater would help)?

  If you 'Option' click the WiFi icon is your in-30, - 40, - 50 RSSI value '?  and your noise value in the - 80-90, you are actually pretty good.

  Then chances are that you get a signal strong enough.

  You can check all the contradictory signals in your area via 'Option', click the WiFi icon--> select Wireless Diagnostics

  In the Wireless Diagnostics menu find "Utilities", then select the Wi - Fi Analysis tab, or the menu will just sweep "Wi - Fi", you choose (depends on when Apple changed the Wireless Diagnostics menus.

  Performs a Scan of Wi - Fi will show you your's and your neighbor's WiFi access points.

  You want to focus on the channels, the RSSI and sound columns.

  Channels: You don't want to use the same channel as a neighbour, unless their SECURITY is very low (-70, of-80 to-90), _and_ your RSSI is strong (-30,-40,-50).  If it is a 2.4 GHz channel, you also a 5-channel separation between you is your nighbor harder.  Channels 1, 6 and 11 do not overlap and are common choices, especially if you have several access points in your home.  Once again, if the neighbors have weak signals, you don't really care, because you interfere not with them, and they do not interfere with you.

  5 GHz channels do not overlap and are also much faster than the 2.4 GHz channels.

  But that doesn't mean that you do not want to play with this material.

  We know the Apple Time Capsule.  Is the "wireless Station" an Airport Express?  Or some 3rd party WiFi router/AP to access?

  If an Airport Express Terminal, you can use Airport utility to extend your network.  Is not ideal, but easy to install.  Just make sure when you put the Airport Express is a place where it receives a good signal of the time Capsule, otherwise it's just trying to spread the wrong signal as it gets.  Wireless diagnosis can be useful to identify a good location.

  A performance-based approach is to run the Ethernet of the time Capsule to what is your WiFi Station.  Set up the device, then it shuts down its functions of router (Apple calls this 'bridge', other Mode to do this disable you DHCP and NAT services).  You give the WiFi Station a different channel (see above discussion of channel overlap).  You give the WiFi Station the exactly the same WiFi (SSID) name and the password.  Now you will have setup a network of 'Roaming', where the devices will pass you to a different when access point channel it uses currently becomes too low.

  This will help the speed of my connection?

  Another criterion for speed, is how fast your ISP connection vs how old is your WiFi router.

  If you use 5 GHz channels, you can then begin to worry about this when your ISP speed starts to become well above 50megabits/s

  If you use only 2.4 GHz channels, 15-25' ish speeds are OK on 802.11 g.  802.11n is a little more efficient and can tighten increasingly close to 40-50' ish speeds.

  If you have more than 100megabits per second, you want to have a router with 802.11ac protocols up-to-date and a newer Mac with 802.11ac support.

  This requires that you are the only consumer of your ISP connection.  If you share with your family, and there are lots of type YouTube and Netflix streaming, so your Mac doesn't have to have 802.11ac, but you don't want to a fast router in support of all the other devices sharing the bandwidth.  In this case a 2nd access point connected via ethernet can help share the problems of band radio bandwidth.

  I originally bought it for the trip, but I'm not find much use for it on the road and am thinking of using it at home.

  I have access to 5 GHz 802.11ac very cheap $10 point (not a router), I take with me.  I plug it into the ethernet port on the hotel or a router condo rented for give me a channel which is not sung from neighboring access points and shared connections.  I find that the hotel WiFi is often low, and you share the connection with a ton of other guests.  In a rented condo, you have tons of other condos all competing for 2.4 GHz channels (co-owners often get a cheap router 2.4 GHz 802.11 g, so everyone tries to find a channel not used).  Having my own 5 GHz WiFi access point means that I have no need to fight with others for bandwidth and the right channels.

  Just thought I'd pass that along.  And the wireless diagnostic tests are a great way to find out what the competition is where you stay.

• I get a popup "Recommended for You" and on other sites, I get audio from a radio station (?) play and there is no other windows open.

  I get a "recommended for you" popup even if I ran antivirus programs and malware and they say they took their.
  I have also audio play when I connect to some sites, even if only one tab is open.

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

• My IPad is connected to the WiFi router but will not connect to internet. My Internet works on my IPhone and Mac Book

  Since last night, my IPad connecting to my WiFi router, does not connect to the internet.

  Internet connection works for my IPhone and MacBook.

  Hello

  Go to settings resets the network settings on iPad.

  After reset, enter your key wireless router.

  See you soon

  Brian

• Portege M400 connected to the WiFi router, but not the navigation of Web pages

  Hello

  I use M400 laptop computer series that I bought in 2005 and do not know if the guarantee was already finsihed, although I paid extra for an extended warranty.
  You should check a second time.

  My wireless connection was working fine with my conection DSL broadband 2 years ago, I was using router Netgear wireless. In the last 2 years that I did not use wirless conection, recently I bought Thomson TG585 router to my ADSL connection wireless broadband. This wireless router works fine with my other Mac desktop computer but my laptop is not browse a Web page if it says connected with WiFi router.

  I went through all the settings and even I have discussed this question with the technical team bradband and say there is problem with my computer laptop bcz Mac Desktop works fine.

  I checked in the wireless troubleshooting setting and still not able to solve this problem.
  I use KesperKey Internet Security and I tried to turn it off for the test connection wireless but always face same problem.

  I wonder if anyone can help me?

  Thank you.

  Hello

  Disable all the security settings on your router and then try to connect the M400 protected wireless.
  If you will be able to connect to the WLan and will be able to navigate a few s webpage you could activate step by step all the security settings such as encryption of WLan, Mac address filtering, SSID hidden, etc.

  By the way; Have you tried to update the driver WLan?

• Satellite L300 - after installing XP it does not find the WiFi router

  After insatlling XP SP1 and insatlling a lot of everything except drivers WLAN works. I installed the drivers and I install Atheros to manage my connections, but it seems not yet to find the wifi router.

  I use toshiba satellite l300 pslbce.
  PS! I had the laptop that works on Ubuntu berfore, worked well.

  Hello

  Have you updated XP SP2 or SP3? I m wondering that you only use the SP1 and you need to update. SP2 or later is required for some pilot applications and software.

  And where did you downloaded the Atheros driver? You must use the driver from the Web from Toshiba site. The portal of WLAN, you can find the latest drivers:
  http://APS2.toshiba-tro.de/WLAN/

  Welcome them

• What is the recommended for this kind of application design patterns

  Hi all

  I'm working on a project that should look like a Tablet PC application, shown in the attached photo.

  The larger window on the right side should change according to which key has been pressed in the left vertical bar.

  My question is, how can I implement such behavior or is it a design recommended for this model?

  My first idea was to about tabs but this means that all controls and indicators are needed in the main vi who would make my code confusing if it grows.

  Thank you for your answers

  Benjamin

  Take a look at the architecture of this plugin here.

• OfficeJet 6500 e710n: my can´t officejet 6500 detect the wifi router, expire after 20 minutes of searching. The network works

  Hello

  I connected to a router Thomson lapttop two stand-alone and two desktop PC wifi printers. As I can connect to the web

  and surf without problem that the router seems to work at least partially.

  The problem is that printers will not find the router, when I try to configure the printers in the control panel printers, they are looking for the router, but they do not find the wifi (router) connection. After 20 minutes, they then expire without something else facilities worked very well before.

  I called the support to my ADSL provider and they remotely reset the router to factory settings initial but it helps. didn t have tried to turn off the router, printer and laptop computers and then started the router, printers and portable - the same problem. I think that the problem is not in the printers that I have the same problems on both printers.

  Can it be a partial problem with the router, I find that it is unlikely that the problem lies in the printers, because they took place att simultaneously.

  It is a mystery to me and any suggestions are appreciated.

  Bo

  Hello

  It seems more likely that the question is based in your router as the problem affects two different printers.

  For troubleshooting end please move the printer near the router, but not too close... 2-3 meters would be at an ideal distance for testing.

  If you don't see the router yet, may is a Dual Band router?

  It broadcasts at 2.4 GHz?

  Pleae also run a Test report wireless one of the printer, it may help to get a better understanding.

  In the Configuration Menu, select network, go search for Wireless Test report.

  If you can join an analysis of the results of the tests, it would be great.

  Kind regards

  Shlomi

• If you turn off your WiFi router is still sending wireless signals?

  I have the wrt54g router and if you set the 'disabled' wireless settings which means that WiFi is disabled, which stops the router actually send wireless signals?

  I guess my question is do the WiFi compatible routers send wireless signals even if you "turn off" the WiFi option on your router? Thank you.

  The WRT54G is an active wireless router. If you select off in the wireless tab then the router will not any signal wireless broadcast.

  

• I can not connect to smart wifi router outside of the House?

  Hey.

  I need to portforward port for logging in my smart wifi router Linksys EA6500 from the House to the outside? I can only connect when I am om LAN or wifi...

  Another question: I can only connect to the same router using an application? Is there a way to connect via a browser?

  THX.

  When you have created an account for your WiFi Smart router, have you received a confirmation e-mail? Check your email and you must confirm it so that you will be able to use it. Refer to this link ofr more information: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=12e0e8fa76f340739d0cb72037819ca9_Creating__activat...

• Cannot access the internet through a wifi router

  Hi, I recently bought a method 3 G USB wifi router. I connected physically on my desktop and internet wifi works very well. However I have problems to get access to the internet using my laptop Vista. The laptop is a connection for the wireless network connection, but that's what I get. Any ideas what is the problem?

  On my system, I connect them BOTH to the wireless network connection AND Internet (there are separate connections for each installation) on my laptop wireless.  If I don't connect to the Internet, I'm just locally connected to the wireless network.  If I am not connect to the wireless connection, I can't connect to the Internet.  I know not how your needs to be installed, but that is probably the problem.  You may add an internet connection for your laptop, and then connect both to achieve a good connection.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• want to connect to hp JO 6800 via wifi to my laptop with a wifi router. is this possible?

  want to connect to hp JO 6800 via wifi to my laptop with a wifi router. is this possible?

  Hello

  Yes you can, you can configure it for your printer:

  

  Please follow the instructions in the following book:

  http://h10032.www1.HP.com/CTG/manual/c00256077.PDF

  Good luck.