Left channel audio

Similar Questions

• Camileo X 450 Audio only in the left channel

  Hi, I bought a Camileo X 400 that had a focus problem, so I have sen't back and Toshiba sent me a replacement unit, in this case a Camileo X 450.

  The problem is that he only record audio on the left channel.

  Is there a way to fix this?

  Best regards
  Paulo brine.

  Paulo of Halo

  All you can do is to check all the settings to see if something can be changed, but I don't think that there is something that you can about it.
  On my Toshiba Camileo H10 cam there is nothing where I can enable or disable an audio channel right or left.

  You have everything new and original box Camileo X 450?

• Inspiron 3531 - audio headphones from left channel

  I have a new laptop of 3531 Inspiron, and I hear audio from the left channel when I plug in my headphones.  Here's the situation:

  -Audio works fine on the speakers.

  -When I plug my headphones all the way, I hear audio on the left earpiece.

  -With the headphones plugged in about 1/2, I hear from the right path. With the helmet on the connected 3/4, I hear the left channel with about 25 percent in volume and the right to 100%.

  -J' checked audio balance and volume is equal on both channels.

  -The headphones work fine on two other laptops.

  Whatever the above behavior if I use the drivers from Realtek installed at the factory, the latest drivers from Dell.com, or if I uninstall the drivers to use the Windows default ones.

  Any ideas?

  owrtq

  Whatever the above behavior if I use the drivers from Realtek installed at the factory, the latest drivers from Dell.com, or if I uninstall the drivers to use the Windows default ones.

  Hello. Normally, I would say that re - install the audio driver, but you have already done this, then contact support for repairs. If you prefer that fix, you have a 21 day period from the date of the invoice (if you got it from Dell). If you decide to return it, you can perform a system recovery. This is the real test to confirm the hardware failure.

• Windows Media Player 12 - left / right channel audio

  I have an mpeg file. He has left and right audio channel, speaking different languages. When I play the file, it defaults to the left channel, but I want to move to the right, but I can't seem to find the option.

  Anyone know how to change the audio channel?

  Hi QYT,.

  You can change the audio language, but not the audio playback channel. For more information on multichannel playback, see the link below.

  http://www.Microsoft.com/windows/windowsmedia/HOWTO/articles/multichannel.aspx

  To change the audio language, you can follow the steps below.

  Click Start, select all programs and click on open Windows Media Player.

  Press Alt on your keyboard and click on play, click on Audio and language tracksand by default.

  In the default language Setup window, choose the language you want to display and click OK.

  Hope this information helped!

  Concerning

  Arona - Microsoft technical support engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Record 2 channels audio WebWorks API?

  Reference on the WebWorks API indicates that the recording from microphones is possible on a single channel. However, the application of voice Notes record clearly on two channels, as can be easily shown by moving the Playbook from left to right while he was recording his own voice. Where can I find the API WebWorks for 2-channel audio, record from the MICS Playbook? Thank you.

  It is currently not possible.  I have added your request to github issues as an improvement to the feature list:

  https://github.com/BlackBerry/WebWorks-TabletOS/issues/54

• Mono (left channel only) stereo

  Accidentally, I recorded a video on only the left channel.  It is to be exported by using two channels.  How to play on both channels.  In the Adobe tutorial, he said, "in the project Panel, select a single element.  Choose item > modify > Audio channels.  In the Edit Clip dialog box, select Mono in stereo mode, click OK.  In the dialog box change Clip I have it on Adobe Creative Pro Cloud CC 2014 shows:

  Audio channels

  Screening: What is set to?

  Number of Audio tracks: what?  My video is only recorded on the left channel

  Format of channels: Stereo; Mono; 5.1; Adaptive.   To accomplish what I need, should what setting I use?

  Preserve channel assignments: check or not?

  Active channels per track: what it is set to?

  If your clip on the timeline is stereo, with audio only on the left (or to the left is the one you want to listen to), go to the Audio effects and add "fill left", who will be the left channel, put also on two L + R (and silencing all sounds which stood on the right lane).

  Thank you

  Jeff Pulera

  Safe Harbor computers

• Do single mono channel stereo left channel?

  I have a stereo audio clip in which only the left channel has been used. I'd like this spread to the left and right - mono, right? I saw a number of Audio effects in my copy of PPro CS6, but I don't see how. Probably very easy and I'm not going to hit my forehead... ?

  Thanks in advance for any help on this.

  On the effects tab, open Audio effects and you should see the left or right fill effects fill. It takes the left (or right) channel and puts it on the two outputs Earth R, ignoring the right channel in the file.

• Motu 8 pre distorted his left channel

  Hello

  I bought a MacBook Pro 2014 2, 2 GHz i7, 16 G memory vivid and connected my Motu 8 pre via FireWire-> love at first sight. When you use it with Logic Pro 10.2.4 is immediately created questions about my left channel. The noise on the right channel is good, but the sound on the left channel is really distorted with a high cry inside.

  Even if I play music via iTunes for example which is good and I start logic the left speaker (always play music from iTunes) is distorted with this small high inside.

  I saw something posted by MillerU812 and tried all of the suggestions, without success.

  Any help would be much appreciated!

  Have you tried the reset.

  Unplug the computer. Hold the Volume button in 5

  seconds. You must first see the light flashing clock, then the first LED

  for analog input 1 or 2, then you will see a "D". Turn the Volume knob to the right until the display shows "OK". Device is reset.

• Windows Dvd maker has left the audio recording

  Windows Dvd maker has left the audio, what have I done wrong? It will record video but not audio. I have other software installed on PC that works fine, so I don't is not material, it Mathilde do something with dvd windows creation parameters. What do you suggest me?

  Hello

  Windows DVD maker has all the features as other programs.  I use it for this reason. Try a newcreation of DVD Windows downloadand see if that makes a difference.

  I use Roxio 2012 Pro to my video, burn them to DVD.

• Cannot get DTS/multi channel audio via HDMI

  Hello
  I'm trying to connect my VAIO SVT15112CXS to my Bravia HDTV via HDMI to get multi-channel audio (DTS/DD) from my Bravia HT (connected to the TV via optical) with no luck at all.

  I have the same setup for PS3 works well, is it cable or equipment.

  I have already updated all the drivers.

  When the TV is not connected I don't get an Audio HDMI option in the playback devices (I checked to show disconnected devices / disabled) and when it is connected I do not get an option to change the configuration of stereo speaker.

  This way I get only Stereo sound.

  I tried passthough HDMI via ffdshow config (installed K-Lite codec pack) and there is no sound in this way.

  Is there a solution? something escapes me?

  Thanks to all in advance,

  Thanks for your time and your response.

  I got it actually work! updated drivers audio and video (not Sony ones sugested, but later of Intel and Realtek) and now I have everything works as it should.

  The only minor problem is that Vaio Care now wants me to go back to the previous version of the driver, but I'll just ignore it.

  Everyone, try this if you experience this problem.

• Convergent Odyssey 8 channels Audio errors on first 2015.3 Proxy

  So I try to use images of Convergent Design Odyssey 7 q +.  I have the latest firmware on the Odyssey in which all the video files are failing to 8 audio recording channels.  It is an option greyed and saving some files, in my case, a file of Sony, he let me only to record 8 channels of audio.  Not less.  When I import a file saved in the first, everything is as it should be.  When I try to create a proxy of the new feature of Adobe proxy, I get an error.  Invalid audio type.  The H.264 preset does not support 8-channel audio.  If I change to a quicktime it creates a proxy very well, it's just much more.

  Anyone could create their own preset who ignore the extra 6 audio channels?  Or someone else has experienced this with a work around?

  The current Proxy workflow doe requires audio channel mapping and you have already noted, export H.264 does not support the 8 audio channels, but QuickTime does. You can select a codec and settings in QuickTime so that the file size smaller, if that's what you want. for example: Apple ProRes 422 (Proxy) with a smaller image divisible by your original media size.

  This will give you the file size reduced, to maintain good quality and is a codec that is well suited for the editing.

• Export DNxHD with 8 channels audio multi... Problem! the final file only stereo all mixed with 6 empty strings.

  I export DNxHD with 8 channels audio multi... My problem is that the final file all mixed in the first 2 stereo channels with the channels empty rest 6.

  I'm lost on what could be the problem.

  The main audio channel is 8 channels... NO stereo.
  Export, I chose DNxHD and audio 48000 Hz with 8 output channels

  
  What could this be? I need to deliver a film with the 8 mono channels.

  Really appreciate all the thoughts/help!

  Thank you

  Christian

  That's how I would implement mixer in CS6's using a sequence of 8 track with 8 mono channels (mono channels using maintains levels matching, stereo and standard tracks can cause differences in level of 3db). Note the Red output channel selection and the panpot position indicated in blue.

  

• I'm trying to export multi-channel audio as apple pro res 422 HQ, but the tracks are all coming full joint rather than separately. I've implemented the multi Channel sequence already. What I am doing wrong?

  I'm trying to export multi-channel audio as apple pro res 422 HQ, but the tracks are all coming full joint rather than separately. I've implemented the multi Channel sequence already. What I am doing wrong?

  All 4 titles are coming as complete blends not divisions. I guess that's a problem with the entrenchment of the channels, but can't see how to fix. Andy

  Is what would you say to my quick thought without following through all the processes after the fact, the sequence settings? My thought is that the sequence settings must be multichannel as you show, but each Adaptive track, so this channel map is routed at your leisure. If this is not the case, already, it would create a new sequence with these settings.

  I try to upload the photo

  

• Left channel stereo 700 p quit

  I hear is no longer the stereo of the left channel on my Treo 700 p.

  I use stereo headphones for Palm (two pair, these two don't) and PocketTunes Pro.

  Stereo was working fine, then one day only the right channel.

  On the phone, both work very well, only fails on stereo.

  I found a post of 2007 by Zarantha support Palm that a hard reset can solve a similar problem so I tried it... no chance.

  Suggestions please.

  There may be a problem with the microphone in the earpiece. Click on the following link for the post on the forum about this. Thanks to great contributor, DTfromBH.

  http://forums.Palm.com/Palm/board/message?board.ID=hardware&message.ID=31143&query.ID=113582#M31143

  For reference purposes, click the following link to the support page for your device on the kb.palm.com Web page.
  http://KB.Palm.com/SRVS/Nua/launchTab.asp?t=home&fn=Treo&MN=700p&CN=Verizon

  There are links on the page the user Troubleshooting Guide, how to, downloads, etc.

  Message relates to: Palm i705

• 1 Channel Audio convert to 2 channels

  1 Channel Audio convert to 2 channels.

  I have a few old Hi8 video tapes that I recently converted to DV, but I don't have a single audio channel, is there an easy conversion to two audio channels. I know I could do all the audio work in SB, but here a simple way to this PR in

  Thank you

  MAB

  Take a look at the clip > Audio mapping Options.

  for example. Mono Stereo etc.

  Its much easier and faster to map the original videos rather than apply effects to all.