Recording problem HP to HP eprintcenter

Similar Questions

• I have problems to connect to ePrintCenter and the password recovery link does not work for me.

  I have a PhotoSmart 5510e which was working fine until recently these app printing stop work and display of messages that I need to go to for custom ePrinterCenter it. Has tried to open a session in the ePrintCenter but it keep telling me the password is not valid. And when you use the password to get the link, it keeps telling me to enter the email address associated to the my account when I click OK. I already have then enter the email address what do I do? Really need to connect if I use the App founction on my printer. My computer is running Win7 64-bit.

  Hello jc111,

  I would like to apologize for the problem you are experiencing.  The eprintcenter.com site and the site snapfish.com are connected.  It is possible that you had a printer in the past that you signed up for an account with snapfish, while you were recording with us and you didn't.  I would try going to snapfish.com and using the forgotten password under their log link to see if who you alow reset you the password.  Once the password is reset, log information Web site snapfish.com will be information to use to connect to eprintcenter.com.  If you need anything else please do not hesitate to answer.

• Digital recorder problems Toshiba HDR5010KB

  Ive been happy with my digital recorder HDR5010KB so far.

  Some problems occurred:

  (1) on the playback of recordings, the image seems to freeze image and then jump to catch up with the audio.

  (2) the recorder fails to record programs when the recorder is in standby mode. (program than a single clock set - if theres no program conflicts etc.).

  Ive reformat the drive, updated the software (from download Toshiba) and I did a reset of box of manufacturing and the problems are still there.

  Any ideas on how to fix cela - or will it be a case of back to Toshiba warranty?

  Thank you very much!

  Hey dude

  It comes to portable systems from Toshiba, the options and the accessories forum.
  I don t think that someone might be able to help here in this community.

  I recommend you to contact your dealer for recommendation... maybe guarantee would cover this issue...

• On the audio recording problems

  Hi all

  I have a problem with regard to save audio files in Labview.

  In my program, I acquire the audio signals of the soundcard of the PC constantly and save them in a queue. After that certain prerequisites are activated, these audio signals in the queue is stored in a .wav file. This program works well, except a problem, which is the time lag in this .wav file. For example, I save a sound segment for about 30 seconds, but after the backup, this .wav file is just 21 long s. It contains all of the original recorded segment, but the time axis is compressed, which sounds like played fast. I searched all day and could not find any information about it.

  These sounds record and save functions are part of a comprehensive program, and I'm sorry that I can't give a single vi on it. I add the numbers below and I hope it helps. I am also willing to provide any additional information.

  PS: I have reviewed the incompatibility caused by approximation of the "t0" (published in http://forums.ni.com/t5/LabVIEW/Time-mismatch-with-Sound-Input-Read-VI/td-p/1385404 ) and compensate for that during the savings phase. (see figure 2)

  Thank you very much for the help!

  

  

  Hi, Vans,

  Thank you for your response.

  For your questions.

  1. I'm using Labview 2011 sp1 on Windows 7/Xp. I tested the program on desktop computers and laptops. I don't know about the types of sound card, but given that this problem occurs on several different computers, I think that this is not the problem of sound cards.

  2. for the sound card sampling frequency, in fact I checked that. I read signals of waveform of the 'read.vi of sound entry' and the term 'dt' is equal to 1 on the sampling frequency. So I think that the sampling rate of the sound card is correct.

  In fact I have just solved this problem by myself, but the solution is pretty weird. I think there are two reasons that caused this problem.

  1. when I receive tones of "read.vi of sound input", I first save them in a queue. Once the acquisition is completed, I save all the signals in the queue to a .wav file. But I'm going to do to overcome the overlapping sound and the gap caused by the "t0" reconciliation, a waveform signal re - organize before saving it, as below. According to my knowledge, I think that this 'dt' in the resulting waveform (indicated by the arrow) must be the same as before, but in fact it is not, and it becomes 1.

  

  2. Thus, to solve the first problem, I manually change the term "dt" once again as below. After the change, I'm sure that the "dt" is back to the correct value. But then is the strange thing is I saved the same signal waveform in two different ways, using "his write.vi file" and "file its writing simple.vi" respectively. The first method is the one I have used before and it caused the problem I posted here. The second works. In my program, I put as 16 kHz, 16 bits/sample, and 1-channel sampling rate. The file .wav from the first method has a strange flow 705 bps and the wave from the second method file has the right bitrate which is 256 bits/s.

  

  I tested the program of hundreds of times and each time he acted like I described above. I don't know if anyone has ever faced the same problem as me, but I hope that my solution can be useful for others. And I also hope to be useful to improve your LabView products.

  Thank you for your time.

  Best regards

  Sun87

• IMAQ - SGL in RGB? JPG, save the AVI recording problem...

  Hi all..

  Currently, I am working on a project concerning the treatment of the infrared image...

  I'm currently building saving Image Photo and recording function avi video...

  What I have to do is save the image with the color palette selected to user in format JPG and AVI...

  The problem is my image data type is gray (SGL) and the only support of "IMAQ AVI write Frame.vi / writing file (JPG)" the image of U8 and U32 RGB type...

  I am trying to cast the type, but since we don't have the vision of labview license... so I don't have the "Imaq Cast Image.vi" to treat the good cast...

  Is there some way could solve my problem?

  Thanks for any help...

  Read Eric

  Hello StussyHooot.

  I am pleased that help you.

  This is a vi that converts an 8-bit image in an RGB image, based on a color palette.

  Concerning

• Voice recorder problem - 4 GB Sansa Clip V01.02.15A

  UM mean throughout all the records/reading on each device Sansa or what xferred for PC.

  has anyone else had this problem or can get ideas?

  The Zoom H1 gets only about 10 hours of battery life with an AA battery. The Olympus ws700m gets about 25 hours of battery life with an AAA battery!

• Recorded problems with PDF in illustrator

  Hello

  I designed a menu for a client in illustrator and saved as a PDF file. That, once I record looks like this...

  

  The customer has now come back to me, because when they download it from the site of printers it looks like this...

  

  I tried registering in different sizes and uncheck and check some options in the PDF save menu but whenever it is downloaded on the website of the printer, it comes out looking bad (not always the same, but still lack of pieces or pixelated with the color changes)

  Anyone have any ideas where I'm wrong? Still, it looks good on my laptop, it's just when it is transferred to the site of printers?

  Thank you! =)

  Sorry for the confusion 'export' - my brain was operating in indesign.

  Here is what I tried it - I don't have illustrator here at home - so I used my work VPN to connect to a machine that has CS5:

  analysis-

  file was created in Illustrator 5.1 (part of the CS Suite 5.5).

  No spot colors

  file size is 9.6 MB

  no purge on document

  work plan is 4.25 x 6.25

  all objects appear to be vector

  the text outlines is

  I tried to make it work and can have a solution (I made a new file, but it is 11 - probbably too big for e-mail)

  possible solution:

  1 make a new layer and make sure it is the top layer

  Select all the text elements (VEGAN, the address block, all the menu items) move them to the top layer.

  2. turn off that layer

  3. Select all the original layer - go to object > rasterize - in the dialog box that opens - the pixelation CMYK value - 600 dpi - then click OK - this will rasterize the baskground.

  When he finally... back on new layer - save the file under a new name (if you still have your original intact).

  4. your PDF for printer this NEW file.

  I have attached a jpeg image of what it should look like your finished document (assuming that the finished piece is supposed to be 4-1/4 x 6-1/4) he may need to bleed more (top, bottom and right side).

  hope this will solve your problem... good luck

  

• Insert and update DB record problem

  I am writing a management tool that allows you to add a record and or update a record in my PB. I bought a text editor or a WYSIWYG editor and I'm trying to adapt it to my code. The form uses a few fields of the form with the editor as the last place to enter the content of the page. Right now all my content in the DB is displayed in the editor, I change the content and submit the form and he lost all the content in the editor, but keeps the content in the fields of the form. This is the code that I use and works for the fields of the form, but not the Editor:
  
  < cfelseif ParameterExists (Form.btnEdit_OK) >
  
  < ParameterExists (Form.RecordID) cfif >
  "< cfupdate datasource =" "#sitedatasource #" username = "#siteUserID #" password = "" #sitePassword # "tableName ="SEEevents"formFields =" #Form.FieldList # ">"
  < cflocation url = "events_RecordView.cfm? RecordID = #Form.RecordID # ">"
  
  < cfelse >
  "< cfinsert datasource =" "#sitedatasource #" username = "#siteUserID #" password = "" #sitePassword # "tableName ="SEEevents"formFields =" #Form.FieldList # ">"
  "< name cfquery ="GetNewRecord"datasource =" "#sitedatasource #" username = "#siteUserID #" password = "' #sitePassword # ' LignesMax = 1 >"
  SELECT SEEevents.ID AS ID_Field
  OF SEEevents
  ORDER BY SEEevents.ID DESC
  < / cfquery >
  < cflocation url = "events_RecordView.cfm? RecordID = #GetNewRecord.ID_Field # ">"
  
  < / cfif >
  
  This is the code to insert a file in the editor that comes with the Editor:
  < cfoutput query = "myContent" >
  < cfquery datasource = "db_example", dbtype = "ODBC" >
  Update sampleTable set sampleContent = ' #evaluate ("form. MyEditorName #myContent.contentID #") #'"
  where contentID = #myContent.contentID #.
  < / cfquery >
  < / cfoutput >
  
  Can someone help me to make this work? I'm perplexed and in a place that I need this job immediately.
  Help, please
  
  Thank you
  
  Phoenix
  

  Quote:
  Posted by: newsgroup user
  > Error executing database query.
  > [Macromedia] [SequeLink JDBC Driver] [ODBC Socket] [Microsoft] [ODBC Microsoft
  [> Access Driver] syntax error (missing operator) in query expression "{d
  {> ' 2007-04-13'} ".
  It seems that the error is with your eventDate. in MS Access, dates should be
  entered as # #date # (where date is a date in the format dd/mm/yyyy
  (or d/m/yyyy, according to the regional settings in the database). but there
  should be # 3 on both sides of the date and not '.
  then try changing your SEEevents.eventDate =' #form.eventDate #' to
  SEEevents.eventDate = #form.eventDate #.
  If that always generates an error, you must analyze your form date
  on the ground and make a date in the format MS Access to him first, before
  Add your
  ' mm/dd/yyyy') > and then use it in your query:
  SEEevents.eventDate = ###eDate #.

  This might work, but there are two ways to solve this specific problem. One is to use cfqueryparam and the other is to use createodbcdate. These methods do not work only with access, but with any other databases as well. In addition, you don't have to worry about your date format.

• Qosmio G50-12 q - built-in Recorder problem

  Hello

  I have the Toshiba Qosmio G50 - 12 q, with Window Vista Ultimate 32 bit with integrated masterizze Teac. Every time I try to master a cd or dvd the system tells me who does not find the masterizze.

  In the management system it falls perfectly installed and working correctly. Which is the cause of this is not continuous recognition of the masterizze?

  Whenever I have to reestart system newly

  Thank you for your answer

  Hello

  To be honest I really don t know you mean

  All I understand is Teac masterizze if you have a problem with the TEAC product, contact directly the TEAC.

• Audio recording problem

  Hi all

  Can anyone suggest me the code to run the audio recording!

  The implementation of audio recording!

  Hello

  Check this code it will work.

  
  try{
              player = Manager.createPlayer("capture://audio?encoding=amr");
              player.realize();
  
              rc = (RecordControl)player.getControl("RecordControl");
              bt = new ByteArrayOutputStream();
              rc.setRecordStream(bt);
              fc = (FileConnection)Connector.open("file:///store/home/user/RecordedFiles/audio1.amr");
              if(!fc.exists()){
                  fc.create();
              }
             ot = fc.openDataOutputStream();
              rc.setRecordStream(ot);
              rc.startRecord();
              player.start();   
  
              }catch(Exception e){
                  e.printStackTrace();
              }
  

• Updated with HXD970 DVD recorder problems

  Cannot cross channels TV Player DVD HXD970.

  Anyone else having the same problem?  If so, do I do

  Hello

  It was a problem of update that has been automatically corrected in a few hours.

  Thank you.

  Geoff

• Create record problem in the JHS LOV popup after deleting record

  JDeveloper: Studio Edition Version 11.1.2.2.0
  Jheadstart: 11.1.2.1.28
  
  Hello
  I sent a unit test to [email protected]
  in the pop - up JHS lov window when I delete a file and then, I want to create a new record, it's not working
  but when I click in a field and then click the more icon, it works correctly

  OK, this happens because the code that sets the question to delete that I sent you before. This code must be modified slightly, the following lines:

  Line = selectedRowData.getRow ();
  If (! isMultiSelect())
  {
  make the current line, so removing line will operate in page LOV
  selectedRowData.getIteratorBinding () .getRowSetIterator () .getRowSet () .setCurrentRow (row);
  }
  selectedRows.add (new RowData (row));

  should be closed with a check, if there is a selected line:

  If (selectedRowData! = null)
  {
  Line = selectedRowData.getRow ();
  If (! isMultiSelect())
  {
  make the current line, so removing line will operate in page LOV
  selectedRowData.getIteratorBinding () .getRowSetIterator () .getRowSet () .setCurrentRow (row);
  }
  selectedRows.add (new RowData (row));
  }

  Steven Davelaar,
  JHeadstart team.

• Yet an another Insert Record problem

  I have two tables
  cities & menus
  I have a registration form insert created from the wizard for each table that I'm inserting records in.
  
  The first form, I am inserting a "name of the city. When I insert this record, it automatically gives the name of the city a CityID in the database. It works very well.
  
  The second form, I'm inserting in the fields:
  Restaurant name (this registration automatically creates a RestaurantID
  Name of the city
  Address
  Phone
  Bonnefin
  
  Once I'm going to insert the record in the table of menus, I get the error saying that "cityID field does not have a default value".
  
  "CityID" field isn't a default value
  
  The error occurred in /Applications/ColdFusion8/wwwroot/ncmenus/admin/index.cfm: line 66
  
  64:, < cfif IsDefined ("FORM.logoImg") AND #FORM.logoImg # NEQ "" > "".
  65: cfqueryparam value = "" #FORM.logoImg # "cfsqltype ="cf_sql_clob"maxlength ="100">"
  66: < cfelse >
  67: "
  68: < / cfif >
  
  What can I do to fix this?

  I figured this out. I just needed to include a field for cityID and do fill a menu that extracts data from the database of the 'cities '.

• When validate record problem

  Dear friends,
  
  I try to apply the following code when validating record trigger
  
  
  If *: not in budgcode (select g_budgcode in the cat_acct.g_budg where g_budg_acccode =: t_vou_acc_code) * then
  alert_id: = find_alert ('MESSAGE_ALERT');
  set_alert_property (alert_id, alert_message_text, 'Incorrect Budget Code..');
  alert_btn: = show_alert (alert_id);
  raise form_trigger_failure;
  end if;
  
  
  during compilation, it throws the following error
  
  subquery not allowed in this context
  
  Thus, any work around?
  
  waiting for answer
  
  
  Manish Manyal

  Yes:

  select count(1)
  into l_count
  from cat_acct.g_budg
  where g_budg_acccode=:t_vou_acc_code
  and g_bugcode = :budgcode;
  
  if l_count = 0 then
   ...
  

• iOS 10 people record problem/question

  Hello

  I have a couple of "faces" in the issue of people who are coming in white, but acknowledged same 'face' of many times.  Is anyway to update it for photo comes actually?  At a few faces, I don't know that facial recognition found since it is coming from white.

  Hi JohnP007,

  Congratulations on your iPhone 7 more running iOS 10! I understand that some of your faces in the album of people pull up as a draft and you want to refresh. You can try to use the steps below to fix the faces on the thumbnails in albums.
  

  Difficulty faces and names mixed-up

  If you notice that there is a photo of someone in a collection that is poorly identified, you can remove it.

  1. Tap the person you want to remove in the album of people > select.
  2. Type Show done face to emphasize his face in every photo.
  3. Press on each photo that is not the person.
  4. Type > not this person.

  Hide people

  You can hide the people or groups that you don't want in your album of people.

  1. Open the album people and press Select.
  2. Touch the people you don't want to see.
  3. Click Hide.

  If you want to see the people that you have hidden, press on show hidden people.

  People in the Photos on your iPhone, iPad or iPod touch

  This should be corrected without delay faces. Please use the Apple Support communities to post your question. Good day.