Recover even disk not work?

Similar Questions

• Satellite P200D-139 - recover F8 does not work

  Hello world

  I need to restore my (Satellite P200D-139) mother's cell phone to factory settings.
  I press F8 at startup, but when I select the recover, it starts just windows normally rather than taking me to the recovery page... Why past/what should is I do?

  Thanks in advance,

  MBL

  Hello

  I m not sure why this product maybe something was wrong with the HARD drive partition or files on the HARD disk partition.
  Did you choose; F8-> fix my computer-> drive HARD recovery?

  If this does not work, you will need to use the Toshiba Recovery disk which you + if all goes well + created using the Toshiba Recovery Disk Creator.

• Buy recovery disks NOT working - Compaq sr2020nx

  SYSTEM SPECS:

  http://support.HP.com/us-en/document/c00749174

  ORIGINAL PROBLEM:

  Hello.  I am working on a friends Compaq sr2020nx PC where the hard drive gone bad.  The disk was diagnosed as bad that he's not INTELLIGENT diagnostics in the BIOS.  It is not available when booting from a live Linux or as a slave drive in 2 different computers running one XP Pro Windows 7 other.  The hard drive is definitely bad.  He had not burned the recovery discs before the disk leave so I ordered the recovery disc from Compaq/HP for $15.

  8

  The system came with XP MCE 2005 64-bit.  The disks that HP/Compaq let me order were the 64 Windows XP MCE SP2 recovery.  There are 3 DVD provided.  2 are recovery disks and 1 is complementary.

  The new drive is a Western Digital SATA 320 GB.

  WHAT DOES NOT WORK NOW

  With the new installed hard drive I boot from the #1 system recovery disk.  I get a message that says "no operating system installed or damaged partition.  Press 'R' to perform a full restore of the PC. »

  I press R.

  I get a message on the bottom of the screen that reads, "Preparation of partition recovery - please wait." with a progress bar under.  That completes it.

  Next message I get is 'start the PC recovery.'

  The screen then goes to the word "COMPAQ" in big red letters on the screen with a small progress red bar that scrolls under it.  (Kind of like when XP starts when you have the "XP" logo and the Green scroll bar just below.)

  COMPAQ screen remains for almost an hour before I get a blue error screen: 0x0000007B that reads something to the effect of Windows stopped to keep from harm the system runs chkdks etc...  According to HP/Compaq support pages

  http://support.HP.com/us-en/document/bph07144 I'm supposed to try to redo recovery.  Same thing is going to always ending in the Blue error screen.

  I TRIED THINGS

  That's the problem.  I can't get the purchased recovery disks to restore the system.  I tried cleaning the DVD, using a different DVD player, but always the same.  I am able to install and run Linux on the hard drive and the computer works fine.  I can install Vista 64-bit on the hard drive and it works fine.

  I checked the hard drive after you start the recovery process and it fails.  It seems that the recovery disc creates a FAT32 partition of 8.5 GB and copies on some files.  It leaves the rest of the disk unallocated as if there is never that far in the recovery process.  I tried recovery after having 1 partition and format.  The recovery disk when it is run again will create the 8.5 GB FAT32 partition and leave the rest of the disk unallocated.  I tried to create a single partition to the unallocated space, and then rallied but still not the COMPAQ screen for an hour and then fail.

  At this point I don't know what else to do.  It seems to me there is something wrong with the image discs that Compaq has sent me.  Something to do with the drivers SATA is not on it?

  Any ideas?  Thank you.

  I solved the problem by using a 200 GB IDE hard drive, I had in another computer.  The recovery disks worked fine with this drive.  There is nothing wrong with the Western Digital 320 GB disk but for some reason it wouldn't work with the recovery discs in the Compaq.  Maybe it's a SATA I vs SATA II issue or a driver problem with restore disks.

• Windows Exployer will not respond in 'Normal Mode', in 'Safe Mode' or in 'clean boot '. "Fix it" even does not work. How can I fix this problem?

  Windows Explorer does not work in 'normal', in "Safe Mode" Mode or in "clean boot".  Same 'Fix it' does not.  How can I fix this problem?  I have Win 7, 64 bit.  Thank you.

  Hello

  1. do you receive any error messages?
  2 has there been any changes made on the computer before the show?

  Method 1:
  If this solves the problem, you can run check and the (SFC) System File Checker tool. SFC scan would be a system file corrupt on the computer search and replace.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 2:
  If the problem persists, you can create a new user account and check if the problem still persists.

  Create a user account
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  If the problem is resolved in the new user account, you may have corrupted profile.

  Here is the link for troubleshooting a corrupted profile, you can follow the steps mentioned in the link.

  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Method 3:

  If the problem persists you can scan your computer anti-virus using the Microsoft Safety Scanner.

  Microsoft safety scanner will help us to get rid of software viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Warning: If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also, if files and folders are affected by the virus, while they might even get deleted.
   
  I hope this information helps!

• PA4293E-1HN0 HARD disk not working anymore

  Hello, my hard drive has worked several times but not working anymore on my PC

  PA4293E-1HN0
  Toshiba series DT Desktop 3 to, SATA 6 Gbps

  Series: DATA STORAGE 3.5 SATA HARD DRIVE 3 TB [table]

  I am on Windows 7, I tried another hard drive on my PC, this one worked just drive hard toshiba

  I tried to re installed Windows because it is perhaps a problem with the registry, but I have this error code: e0000100

  The question is: the BIOS recognizes the HARD drive and it is possible to access or to format the HARD drive...
  If the HARD drive is not recognized by the BIOS, then the HARD drive is faulty and must be replaced.

• I have problem with new Explorer Firefox, because I need Lukutulkki translation program. I even does not work with the new firefox Explorer. What can I do with it?

  If I download the most recent firefox Explorer I can't use Lukutulkki program translation. This program is very important for me becauce I
  do not quite understand English. Should I start to use Googlechrome
  Explorer or do you have some other fix it

  See the help page at

  • www.lukutulkki.fi/ohjeet_faq.php

  If this does not resolve the problem, contact the author of the add-on for the support

  • www.lukutulkki.fi/Yhteystiedot.php

  You can also use various other modules or Web sites to translate

  • https://addons.Mozilla.org/Firefox/search/?tag=translate
  • http://translate.Google.fi
  • www.microsofttranslator.com

• Led of ThinkPad logo red on top I even does not work on my t430s

  Normal LED on the cover of the thinkpad is a red dot that appears on the top I. This point does not light. Am I missing something to make it i on the logo flashes again.

  T430s, T430, X 230, X230t, T530, W530 does NOT use a RED LED on the dot i.

• Y580 background winds does not work correctly... help!

  Hi all, I just got my new Y580 a week ago. I use HWMonitor to check the internal temperature. The highest ever record temperature is 81 c for the CPU (where the game). I think it's high enough, think that I have the laptop high about 3 inches off the table and my room is quite cold (it's winter here). So I checked to see if the low 3 vents are working properly. I think that the bottom venting air draws in to cool the Interior. So if I use a small piece of paper, he should stick to the passage because it is sucking air. The piece of paper only stick to the upper vent (the one near the ventilation hole on the side of the laptop), but not the bottom 2. Also, the upper vent feels kind of cold to the touch after extended use, which make sense, because it is sucking air. However, the lower 2 events feel the same and feel a little warm. This thread believe me the 2 vents below even does not work properly.

  
  

• HP Probook 6465b: Broadcom 4313gn does not work after the upgrade to Windows 10

  My laptop is HP Probook 6465b (model 2012) it came with Win 7 Pro pre-installed.

  I upgraded Win 10 and after that a Wi - Fi connection does not work. Then I tried the new facility, but it's the same thing.  I have come back to Win 7, but I would like to upgrade Win 10 if I can get the WiFi adpter for work.  My laptop otherwise works fine and it is not that old so I am confused why this wi - fi adapter gives me grey hair.

  Here is what happened:

  Just after upgading wi - fi works very well until the first stop. After reboot, free WiFi does not work and there is no wi - fi adapter in Device Manager. However, it's there, but it is hidden.

  I tried freezing and relocation of the map and I downloaded the latest drivers from HP Support, but I can't get the adapter to work.

  To get the internet to work I plugged USB wi - fi adapter and suddenly the WiFi Broadcom card started working also. She even worked after unplugging the wi - fi USB adapter but after reboot internal wi - fi adapter was missing again well (hidden and does not), it is too compligated to do each time and she even does not work every time, just every now and then.

  Any suggestions?

  pavis

  Please install the driver it works with the Windows 10

  WLAN

  Qualcomm Atheros QCA9000 series Bluetooth 4.0 + HS driver

• BrowserFieldDemo does not work on BlackBerry (8900 model)

  The BrowserFieldDemo application does not work on the device, model 8900 curve and the same app works perfectly on Simulator 8900.

  I compiled the application with component and registered code signing package JDE 4.6.1. I gave all the permissions the application on the device (all permissions are set to "Allow").

  The web page, which I am trying to access the app has a label message and a text box in the HTML code.

  I am not able to understand if it works perfectly on the 8900 Simulator, why even does not work on the device.

  can someone help me on this please?

  Have you tried to add '; inteface wifi = "or"; deviceside = true' to the URL depending on the type of connection?

• Problem of Pavilion dv67023tx, drive damaged, recovery system recovery cd does not work

  Hi all! I really need help

  I bought my computer hp laptop Pavilion dv67023tx July 2012.  When I bought it, they gave me a set of recovery disks. January 2013, I did a system restore. It was fine then.

  Later, after some software hp update my cd player began to eject automatically. The light of the hp on the lid logo disappeared also. My audio jack went wrong from the beginning. So for all these problems together, I took it to the service center, and as it was in warranty period, they sent to hp. 3 months later I have my laptop back, I was informed that hp has changed the hard drive, motherboard, cover, screen.

  There is a month Itried to install some of my software I used earlier, but they were not working. If I had no other way than a system recovery using this link

  http://support.HP.com/us-en/document/c01867418

  Then the main problem occurred. I couldn't do a system recovery from disk on my laptop. Then when I tried to do the recovery disks and he says, the system recovery disks do not support this computer. You are not able to restore this system with these discs.

  http://support.HP.com/us-en/document/c01868346

  This link said, maybe its because hp has changed the motherboard.

  Now what should I do? I need a factory. But recovery in my laptop drive does not work, my recovery disks do not work. Please help me out of this. Or give me email ID so I can contact HP directly with problems, I do not find anything.

  Others suggesting me to install a pirated Windows 7, I don't want it. I had a real windows 7 pre installed, why should I?

  I'm sorry but I can't help you with recovery disks not working is not on your computer, but I don't have an alternative. If you can still read the 25 characters on the COA affixed Microsoft Windows product key at the bottom of the computer, you can install Windows 7 Home Premium using this key. Please see "how to install Windows 7 without the disc" to get instructions on how to download Windows 7 SP1, create the installation media and install Windows 7 SP1 by using the 25 digit product key from the COA Microsoft on your computer.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• Dfrg.inf is missing that is no doubt why Disk Defragmenter does not work. How can I recover it?

  How can I recover dfrg.inf?  It is absent and is probably the reason Disk Defragmenter does not work.

  An alternative Defragmenter that I use is defraggler is a free download at www.piriform.com/defraggler/download/standard

• HP Pavilion: Disk drive does not work even after I have installed and uninstalled

  Hello

  The disk drive on my laptop does not work. It does not recognize the CD or DVD. I tried to go into the currency manager and uninstall the drive and scan the image but it does not work.

  This error appears when I look at the properties of disk drives:

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19).

  I don't know what else to do.

  Thank you.

  Hello

  Try the rest of the procedure to the title of the subheading resolution - method 3: manually difficulty corrupt registry entries on the link below to remove upper and lower filters and see if that helps the issue.

  http://support.Microsoft.com/kb/982116

  Kind regards

  DP - K

• I'm trying to recover my Windows Vista, but one of my #2 recovery disk does not work... What can I do?

  I copied 2 cd on my hard drive disk recovery & disk #2 does not work. I tried to get through the system recovery to restore the computer to its original factory shipped State. It calls into original form and content reinstalles. Then it restarts to finish and said: ERROR LOADING C:\PROGRAM FILES\WINDOWS MEDIA PLAYER\wmssetup.dll THE SPECIFIC MODULE COULD NOT BE FOUND!

  THEN IT CONTINUES TO THE NEXT WINDOW WHICH SE BED:
  INSTALL WINDOWS
  WINDOWS COULD NOT PARSE OR PROCESS UNATTEND ANSWER FILE FOR [SPECIALIZE]. THE SPECIFIED IN THE ELEMENT OF THE RESPONSE [MICROSOFT-WINDOWS-DEPLOYMENT] FILE.

  AFTER THIS WINDOW IT SAYS PRESS OK BUT MY LAPTOP DOES ME NOT LEAVE THE REST OF THE ARROW IN THE MIDDLE OF THE WINDOW & WON'T LET ME CLICK ON IT! WHAT CAN I DO TO GET THROUGH THIS PROCESS!
  YOUR HELP WOULD BE GREATLY APPECIATED! THXS
                                                    

  Contact the computer manfacturer, who provided the original discs.

• my disk driver does not work or even showed that I have have I have the driver on my compyter

  on 'My computer', it shows same (on hard disk drivers) I have a driver cd, and when I put a CD looks like it's trying to work, but nothing happens.

  How to fix this?

  Hello

  Did you of recent changes to the computer?

  This problem may occur if one of the following scenarios is true:
   
  1. pilots of filter in the CD and the DVD storage stack are not migrated successfully to Windows 7.
   
  2. you uninstalled CD software that fails to withdraw properly in the registry.
   
  3. that you have installed a software that adds filter drivers in the CD and the storage stack of DVDs that interfere with existing filters.

  I suggest you first click "Run now" article.
   
  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  If this does not work, manually follow the steps indicated below the articles.
   
  The CD drive or the DVD drive does not work as expected on a computer on which you updated for Windows Vista/7
  http://support.Microsoft.com/kb/929461

  Registry warning

  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry