recover missing projects

Similar Questions

• Lost the original files, is it possible to recover the project through preview files?

  Crashed my hard drive with windows but I have files preview and project on the other drive. Is it posible to recover my project?

  Depending on how the bad hard drive is, you might be able to plug it as a secondary drive and specify files off of it or send them to a service to extract the files. I don't think there is anyway to recover the files through something that first creates.

• PS Touch missing projects, Samsung Note 10.1, Android - please help

  Hello

  My PS touch, on a Note of Samsung 10.1 running 4.1.2 Android, missing projects and folders.

  It happened once before and she came back and I have no idea why and how the project is returned.

  In Android under Application Manager, it is App Total: 170 MB; ~ 72 MB for the application and ~ 98 MB of data.

  So there's data out there and im assuming it's projects. But they do not appear in the application Touch PS.

  Help, please. Thank you

  So, for this particular problem, I found the problem.

  Using the ps on android

  I have two s shortcut on my homescreen nested under two different shortcuts "folders." I got used with a. I fell on the shortcut else today and my projects there.  Yay

• How to recover a project of files hidden CP8

  I asked earlier why there are so many cache files that open when you open a project.  In previous versions, there was only one for each time you opend a project now there are 7 cache files that appear in the folder when you open a new porject.  How to recover a project in the cache files in CP8?  A process that Rod Ward had written for earlier versions of CP8 tried but it didn't work.

  Any help would be appreciated.

  Hello

  Welcome to the Adobe Forums

  Under your "My Documents" folder, you will see "cached record Adobe Captivate projects"

  In this folder, you will see the folder alphanumeric names

  Check the modification date

  Open the folder according to the guidelines of your observation

  Navigate by "db", then you will see this:

  

  Select all, except "already_in_use.lock" and create a .zip file

  Rename the extension from .zip to .cptx

  Hope this helps!

  Thank you

  Gerard Vikram

  Adobe support

• No sound when you export the missing project like HD (AAC codec) video

  Hi there everyone!

  I am facing a problem when you try to export a finished project to iMovie as a HD video, no sound!

  Here's the scenario:

  MacBook Pro (mid 2010), OS X El Capitan free 10.11.2, around 90 GB of space on the hard disk, iMovie ' 09 (Version8.0.6)

  The project is finished in iMovie, ready for publication in HD, when I saw it there, no problem with the sound. However, as soon as I try to export and select HD output quality, the .mov file will open without playing a sound in Quicktime format. If I select "large" inferior quality, it gives me a sound .m4v file. Even when I select "export with quicktime" and manually select the audio options (AAC 256 Kbps) the final version will have all the sounds.

  A few months ago, I've been working on another project, it also exported in HD. When I check the first export view of the current project file information, it will say "Codec: H.264, AAC" size «1280 x 720, "when I export the current missing AAC while having the same dimensions.»

  I'm really not an expert on these matters, but I tried to look for some option in iMovie, no luck. Maybe someone had a similar problem or knows why it does not work. I would appreciate help.

  Thanks in advance!

  I was FINALLY able to get 1080 p with its new output using the following parameters:

  

  I also HAD to define the file manually to .m4v extension before hitting SAVE as iMovie he left .mov (and it has not yet worked the first time he encoding with the .mov file extension).

  I don't know what the latest update messed up in iMovie, but I've NEVER had a problem before the video release.  I hope that they get it fixed!

• create a link to the missing project file

  Hello community,

  for reasons beyond my control some PDF files in one of my projects have been moved on the server of the company structure and should stay there.

  Naturally, these files are now marked as missing in my project. I know where they are - I'm looking for a way to tell LabVIEW.

  If I their right click in the Project Explorer and select "Search for the missing items", I get only a seemingly useless window listing all missing PDFs with no apparent way to solve the problem.

  This should be easy to do, Miss me just something, no?

  My Google search suggested that this could be possible with the professional package (not sure), but no help for me.

  LV 2014 SP1, full development on Win7 64 system.

  Any ideas?

  Best regards

  Florian

  Here's what I'd do:

  1) Save my file .lvproj

  Open 2) with a good text editor

  (3) find the old path and replace the entire (or individually... If you have other files that has not moved) with the new path, taking care that the structure/format remains the same (for example the path separators)

  (4) save and reopen in LabVIEW

  Either that or remove the elements missing in the project and then re-add-the manually or fix them individually.

• How can I recover missing Windows Vista themes?

  My operating system is vista Home premium, but I realized it lacked the themes except the classic windows theme. How can I get these themes in return?

  There is no separate download for the themes that come with Vista.  If they are missing, the only way to recover is to do a repair/system upgrade using the Windows Vista Installation disc authentic (you own or that you can borrow from someone).  Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html.  Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side. You can have a lot of updates to re - install (including all you need to remove service packs).  If the version of the system came with SP1 or SP2 preinstalled and the disc is an earlier version, then you will need to make a record of slipstream as follows: http://www.vistax64.com/tutorials/151606-vista-sp1-slipstream-installation-dvd.html.

  There are many other themes Vista free available online that you can download and use instead if you don't want to do the repaiir/upgrade or if you do not have access to a facility genuine Windows Vista disc and therefore cannot make the repair/upgrade.  Perhaps alternatives theee will be sufficient.  Here's a search for free Vista themes you can check and see if they will satisfy you: http://www.bing.com/search?q=Free%20Vista%20themes&mkt=en-us&FORM=TOOLBR&DI=6244&CE=14.0&CM=SearchWeb.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Recover a project

  I accidentally deleted a project and I want to. Is it possible to recover the deleted project?

  HI Exrorro,

  What version of draw do you use?

  There is now a feature of archive for the iOS version of Adobe draw (he is coming to Android, but not in the app yet).

  If you accidentally deleted a project and that you use the latest version of the draw (v 3.4) and you had worked on a connection wifi at some point (so your work had the opportunity to sync with the cloud creative) then it should be recoverable in an Archive file on assets.adobe.com

  If you use this version of the draw, please sign in with your Adobe ID to https://assets.adobe.com/assets/mobile?filter=archive and see if your work is there.

  Let me know how things are going.

  Sue.

• Missing project after the update

  Hi everyone, my big schock currently, after a first Pro CC, my current project update is here more. I have a lot of the registered version of 17.12.14, but after loading a of these version I see allmost an empty project! Many hours of work... a

  Some has an idea, how can I get support the project with all the pictures - movies - audio - text etc.  I'm cracy :-(

  ================================================

  Title edited by moderator to make it clear and concise.

  Hello Ann, Hello world, this afternoon was my problem with my project resolved "thanks God". I wanted to thank you for your efforts.

  The solution: a good friend of mine, it's almost a professional relationship with Premiere Pro came back from vacation and I was able to describe the problem him briefly.

  Via TeamViewer he could buckle on my PC and analyse the problem shortly. In the timeline, he placed the mouse on the track remains my view of current work and with double click short, it has enabled my missing window.

  Now, everything is as it should be, and I can work again on my project!

  My mistake - I unconsciously brought my status window cut - when I was copying some data it active my window I put it (did not know how?)  in a State of nesting, that is the reason why I could see only two channels

  with video & sound. I didn't know that you can restore the original state just double click on one of these titles. This is useful for larger projects together simple sequences.

  I hope that I was able to describe the problem with my English that you understand what happen.
  At least, I'm glad that my normal workspace is back.

  With the best regards from Switzerland.

• Recover the project of inadmissible AE CS4

  Hello..

  I know its my bad, usually I have AutoSave on and don't care a lot because of this... but this time I opened an old AE7 project so it was opened as an untitled project.

  However when I did and wwanted to my computer in the render queue, I noticed that it was still not registered, so I tried to save it...

  AE just flashed, but nothing happened and now I can't click on anything, nothing happens when I do. the Task Manager does not say his crashed and occasionally messages like "cannot create the drawing surface" or something like that pop up...

  
  

  I know its probably lost but since AE is still working is it possible to recover from a temporary location or extract the RAM or save it somehow?

  Nope. As you already noticed - it's gone. And the bug "surface design" has been fixed in an update to CS4, so it seems that you did not, too and should do as soon as POSSIBLE if...

  Mylenium

• can you recover imovie projects in imovie 10?

  I recently deleted a project after posting to FB and then realized it was a mistake.  I'm trying to get it back, so I can fix it and wonder where will deleted projects?  It is not in my main trash, and there is no imovie trash.  Has it really gone or is there a hidden somewhere trash? (I should say project, no claws, so by selecting "rejected" doesn't work).

  The iMovie Trash is inside the packaging of Library.imovielibrary of iMovie, and it will be empty, when you quit iMovie.

  The iMovie library stores project data.  By default the iMovie library will be in your movies folder in your folder. You can restore the latest version of your iMovie Library.imovielibrary since the last backup Time Machine, what you have done, before you deleted the project.  restore this library to another folder, if you don't overwrite your current version.

• Custom development of modules CompactRIO - Embedded window of "missing" project manager

  Hello!

  The scenario:

  I am currently working on a custom CompactRIO Module. The material is made for the most part, I installed CompactRIO MDK 1.0 and I want to configure my CompactRIO system and develop the driver VI for my module.

  The steps required to configure the cRIO system before you start developing the pilot VI is the following (as mentioned in the documentation of MDK):

  1. launch LabView and select as an execution target FPGA devices. The Embedded project manager window will appear.

  2. Select the file-> New and create a project (LEP) LabView Embedded file.

  3. ...

  Used equipment:

  -LabView 2011, a Student Edition license

  -LabView FPGA and real-time modules

  -NIRIO 4.0

  OR-CRIO9024 controller with 8-slot chassis

  The problem:

  After the launch of LabView and selecting FPGA as a target (see figure), even by pressing the "Go" button next to the slide in the menu window of Embedded project manager will not appear.

  I also tried searching in other menus, without success.

  Issues related to the:

  1. where can I find the Embedded project manager?

  2 is it possible, that I can't find the window of Embedded project manager because I have a student licensed LabView?

  3. How can I create a LEP file in this case?

  4. can I use (and if so, how?) the option "create a pilot instrument? (see the attached figure)

  Waiting for answers,

  Levi

  Hello!

  After some research, I managed to create the link between my custom cRIO module and LabView.

  The complete solution (with LabView 2011):

  -Add the line "cRIO_FavoriteBrand = generic ' in the file LabView.INI"

  -Launch LabView

  -creation of a vacuum of the project and select FPGA execution target, click OK

  -Select 'CompactRIO Reconfigurable Embedded System' as the project type, click Next

  -the next step is the detection of the chassis / modules, followed by the creation of the new FPGA project

  -Add the custom module: click right on the target FPGA-> New-> C Series-> new target Modules or peripheral-> series C Module-> OK

  -Enter the name, select 'generic' module type, enter the location

  Hope it helps someone someday.

  Levi

• How to recover missing files that are still on the hard drive. iTunes and VLC Player can still read the files.

  I had a restore of the system without success and now all my files (music, photos, documents, PDF files, vids, etc) are missing.  My itunes still recognizes the path to music and can play everything.  Same thing with VLC player and photos.   For example, if I go in VLC player and watch my playlist, I see that info a video is C:\Users\kevarendt\Desktop\Vids\... and the player will play the video.  However, I can't file my own.  He is no longer on my desk, where he was saved, but the path always displays it's there.  My drive is still in his usual capacity, so none of my files have been deleted.  I can't even to my user account.  All I see is a Public folder in C:\Users\.  What happened to my user account?  All the paths to my files have nothing to show, but it's still there but invisible.  How can I access it.  I use Vista Home Premium.

  Hello

  I suggest you to check that the same in safe mode if you work, try to perform the clean boot

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  If not work then suggest to activate the hidden files and folders and then check if it works very well.

   

• List of missing projects

  At the launch of Premiere Pro, I don't see the list of projects to the homepage.  I have to select open a project and search for my projects.  Not something huge, but a bit boring.   Any ideas?

  This happened to me once and it was just that there is a list of three points at the top left:

  These last

  CC files

  Sync settings

  And somehow one of the others was selected.  I clicked recently my recent files list, and I felt a little stupid.  Since I never use the other two options I had completely ignored.

• Comment to recover missing components after having moved from "Adobe" from program files and program files on another hard drive internal?

  Hello

  I know that the title is long, but I'll try to be clear. I am currently working a lot on Premiere Pro CS6, since I else riding between movies and my drive Windows C is saturated. Jso got the real good idea to create an Adobe folder on one of my other internal drives and y 'cut and paste' (the thing never to do...) "Adobe" from program files and program files, in order to address space. So I created a file Program Files and another program with them each in a subfolder 'Adobe'. Following this bad initiative, opening again my firstsoftware, you can imagine that I had several bugs no one telling me that it lacked components (obviously) and my renderings, which once on two resulted in a "the software has stopped Monday and needs to close" (trickier).

  I have the coup d'etat switched back the folders on drive C (story of a little more drive the nail), the missing components error message no longer appears, however problems rendering and stop persistent software.  Knowing that about 15 GB is miraculously freed himself... not what is more difficult, but also probably explains the bugs...:)

  My question is the following should I uninstall and reinstall (Creative suite) where there's a you it another solution pour everything in order? Knowing it will take anyway that my C drive is dé-sature a bit.

  Thanking you sincerely pour your help, your guidance, your time.

  You cannot move a folder from one drive to another program (as you know) because that destroys the links that the operating system must have in order to run a program

  Disable this feature to unlock your serial number... Uninstall... Install fresh... also, the Adobe programs do not LIKE to install other drivers

  Move the data files to another disk to free up space on your C drive

  C drive space http://forums.adobe.com/thread/1007934?tstart=0 see answer 4 for the parameter that you must manually change... and then delete the old temporary files