recover programs after the installation of automatic updates

Similar Questions

• failure to screen after the installation of automatic update

  A recent update automatic is originally my screen black out about every 30 seconds. If I go back and system restore to an earlier date, it solves the problem. I had to disable automatic updates. has anyone else found this problem?

  Hi ChrissyStowell,

  ·         You receive an error message/code?

  I suggest you to perform a System Restore to the point when the computer was working fine. Install an update at the same time and the update check is at the origin of the conflict. Follow these steps to update windows.

  Step 1: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Step 2: You can manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

• computer does not start after the installation of vista updates.

  computer does not start after the installation of vista updates. Startup Repair is also not working. event name: Startup Repair v2, prob GIS. 1: automatic failover, prob GIS 2: 6.0.6000.16386.6.0.6001.1800, prob 3:6, prob prob 5 and 6 GIS GIS sig, 4:720907: corrupt file, prob GIS 7: 3221226021, 8:3, prob GIS GIS prob 9: repair wrp, prob GIS 10; 2, 0 s version: 6.0.6000.2.0.0.256.1. In addition, none of these advanced recovery options seem to work.

  Hello

  Try the steps suggested by David Y post dated November 2, 2010 in the link given below and check if that helps.

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/a6071159-db22-4076-b5d8-31f446dbdf32

  Hope that information was useful

• I have a compaq presario cq60 with vista which was able to start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. What can I do?

  I have a compaq presario cq60 with vista. Could not start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. I took the hard drive and installed in my office. Windows Explorer displays the main and recovery partitions.

  The primary partition has the following folders (including hidden & system)

  The recovery partition has the following (including the language files more)

  Someone at - it ideas why my laptop does not work?

  Thank you

  Greg

  Hello

  You press F11 on startup with a HP Compaq to start the recovery process.

  For problems with the recovery process, you will need to contact HP.

  BIOS problems:

  There are messages for the HP Forums for posters with similar errors:

  http://h30499.www3.HP.com/T5/notebook-HP-ProBook-EliteBook/notebook-HDD-problems-TEst-status-1-07-fail/TD-p/658902

  http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-dv8000-getting-1-07-fail-error/TD-p/883284

  http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-notebook-dv6000-1-07-fail/TD-p/1069457

  All the answers it point to a drive about to fail

  See you soon.

• Windows 8 OEM samsung original is disabled after the installation of windows updates.

  I have the original windows 8(Samsung Laptop) confirmed by Samsung as the original windows. Have this laptop for about 2 years now and have reset my windows again. But this time after the installation of windows updates, my windows are disabled and the watermark comes and it is said to activate windows. Samsung said support windows is authentic and check with Microsoft. But Microsoft has no support for 24 hours and support is not live at this time. Can someone help me with this problem. Please, I beg you. And I tried to put the key in the firmware to activate, but nothing helped. And the OEM key is invalid for activation at all.and add I activated my windows by phone before the update using the technique of slui 4... and after it started to update. And now reactivate cant using this key method.and calling OEM is not valid anywhere.

  Hello

   
   
  Please contact Microsoft Community.
   
  We regret sincerely all the inconvenience caused to you.
   
  I suggest you try the phone activation this time and see if it helps.
   
  a. at the start screen, drag from the right side, or hover your mouse on the top right of the screen to display the menu of charms.
  b. tap or click the charm of parameters.
  c. press or click on change PC settings.
  d. If your PC is not activated, computer settings provide instructions that are customized to your activation error. If telephone support can provide assistance for your mistake, tap or click the appropriate link, which may resemble one of the following conditions:
  > Activate

  > Activate by phone

  I suggest you refer to the following article for more information.

  http://Windows.Microsoft.com/en-us/Windows-8/activation-errors
   

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

  Kind regards
  Anusha

• black screen in the window of the program after the first pro cs6 update.

  I worked several months without any problems before this update... Now I can not find which version I had before...

  I have a black screen when playing and the screen of the program after the first pro 6.0.3, 6.0.4 cs6 and 6.0.5 update.

  Reading appears when I turn renderer for CPU, but I have tons of projects already rendered GPU and it slowes my work down.

  I can't use 6.0.0 and 6.0.1 because there is no support CUDA for my GT650M and there is no 6.0.2 for Windows

  What am I supposed to do?

  I followed on my Dell 7720 material:

  Windows 7 sp1 64-bit

  CPU i7-3630QM

  16 GB of ram

  Graphics Intel HD 4000

  NVIDIA GeForce GT 650M

  FINALLY I FOUND THE SOLUTION!

  This problem appeared after Premiere Pro cs6 update 6.0.5. and Nvidia graphic drivers at 320... then 331,65. Reading CUDA started working correctly when I reinstalled the graphics drivers Nvidia 307.07 old. It was very unsupposed problem. NEVER DAY drivers and the system until that your projects are completed!

  Thank you very much for the help!

• "Database corrupt installation" - discovered after failures repeat the installation of automatic updates of Windows

  We're running out of WinXP SP3.  Apparently, we are unable to install/uninstall anything correctly.  I think it may have something to do with "a basic installation damaged."  I got this error when trying to manually install KB972581 (a security update for 2007 Microsoft Office System).  This could have been caused by running the Windows Installer cleanup utility, I didn't have problems with Office 2007.  We were informed at all by continuing to upgrade with another program issues.

  We daily use Outlook 2007.  Multiple users, so we can't delete it.

  Same thing with KB970895 (update of security for SQL Server 2005 Service Pack 2) - another failure with the description of the error "Unable to install Windows Installer MSP file".

  Basically, the automatic updates of Windows always fail.  Comprehensive research of these forums, I found and ran the Microsoft FixIt! # 50202, without result.

  How can I fix anything that makes things installation fails?

  I had a similar problem - resolved two things actually. First make sure yu have the latest windows installer engine. Then download the package fails and run interactive mode. This will give you the 'real' error which causes the failure so that you can correct it.

  In my case it was a dependency on another file system that was resolved by running sfc/scannow - it's maybe not the question you... once again, run the full installation package and also to enablehttp://support.microsoft.com/kb/223300 logging to track down issues...

• Unable to start the computer after the installation of Windows updates

  original title: same problem with the other oddities.

  I also have a computer down the update.  Although I tried several times to start the computer from the installation CD re, when I get to the page where I have options to fix or exit, locks from my computer to the top and will go no further.  Suggestions how to get the computer to boot the CD and allow me to choose the repair option without locking up?  Thank you!

  I finally managed to get the reinstallation CD to load.  I also spoke with telephone tech support at Microsoft who helped me to descend KB977165 my system.  After that was removed the computer booted without error.  By MS tech, I am also running the anti-virals and malicious programs to see if they detect all the other infections.

  Originally, the CD would load to the point of being able to choose between the options: continue to fix or exit.  At this point, the computer froze upwards and would not all repairs in order to remove KB977165.  Microsoft launches a call again tomorrow in order to install safety free bug so far.

  Thanks for your reply.

• Joined to a domain and an administrator remote after the installation of SP1, updated to 10 settings (clean install) then

  Wipe the hard disk, reformatted and did a clean install of OS7 home (fossoyées pro hoping group domain policies and etc. would not be a problem).  But they are still there. Reinstalled again.  I can't remove the files manually, give me permission. Loading guard who looks like a fake update file, but I can't delete that either.  I'm at my wits end.  I also have a problem with one of my Outlook email accounts, displaying a string of what looks like a key under my user name.  I have dealt with this for 2 months.  had my machine to two different local mechanics and nothing.  Even exchanged the motherboard and the drive.  How's it relate?  I do not even use the same key.  The only way he could do it is through my network connection. (Disabled Wifi too).

  I read something on the Panther Trojan and I do not have a file of Panther on my machine (which again, I can't delete).  I didn't even think that HOME version had this kind of remote administration and yet it moves it. Its load of 32-bit strange file and run it on a 64 bit system.  I don't know what to do from here.  I can't get a version of Windows installed which does not suck up all my processing power and crazy amounts of data transfer.  I pulled out an old HP Pav and am now loading XP on it.  At least I will be able to view and edit files it contains.  I don't think safe, even check my email on this machine. (I use my ipad for that).

  Here are the results of the queries from the command line, screenshots and event log shears.   Since I was the last reinstall at about 21:00 there are 294 Logon and created special logons.  Not to mention that I had an another windows machine and one android corrupt their hooking up to my Dungeon phone.  The worst is a 10 years ' worth of my design files holding external drive.  Sighhhhhhh...

  IM so sick of looking at this.  Im going to bed and hopefully not dreaming about it.  If someone can tell me how to stop this happening, I would SO appreciate it.  Support for Windows is a joke.

  I have run 3 different programs of Virus Scan on it, reformat the drive twice (wiped to zero once), and used three different install media (three different versions of Windows. 0 s 7 home, pro and pro OS7 OS10 (7 pro is what I was running when this began).)  Again, it is after that I paid two services of different repair to diagnose, pull the wireless network card, replace the motherboard and replace the disk.  After that I freaked out on them they began to throw the installation discs and Home keys. lol seriously, I might as well throw my money down a hole. (the key I've finally pulled the machine isn't that I've never owned?) I guess that's why I'm trying so hard to get pure installed, I already so much money in it.  I should probably just give up and load Linux.

  If I ever get my hands on this bloody trusted installer it is a dead man. Thanks in advance!

  Microsoft (R) Windows (R) operating system group policy result tool v2.0
  Copyright (C) Microsoft Corp., 1981-2001

  Created on 20/07/2016 at 23:03:12

  The RSOP data for OWNER-PC\Administrator on your PC-OWNER: Logging Mode
  ----------------------------------------------------------------

  OS configuration: Standalone Workstation
  OS version: 6.1.7601
  Site name: n/a
  Roaming profile: n/a
  Local profile: C:\Users\Administrator
  Connected over a slow link? : no

  COMPUTER SETTINGS
  ------------------

  The last time group policy was applied: 20/07/2016 to 22:31:33
  Group Policy was applied from: N/A
  Group Policy slow link threshold: 500 Kbps
  Domain name: 37L4247E29-32
  Domain type: Windows NT 4

  Applied Group Policy objects
  -----------------------------
  N/A

  The following Group Policy objects were not applied because they were filtered
  -------------------------------------------------------------------
  Local group policy
  Filtering: Not applied (empty)

  The computer belongs to the following security groups
  -------------------------------------------------------
  Required at the system level
  Everyone
  Builtin\Users
  NT AUTHORITY\SERVICE
  LOGIN CONSOLE
  NT AUTHORITY\Authenticated users
  This organization
  BDESVC
  BITS
  CertPropSvc
  EapHost
  hkmsvc
  IKEEXT
  iphlpsvc
  LanmanServer
  MMCSS
  MSiSCSI
  RasAuto
  RasMan
  RemoteAccess
  Annex
  SCPolicySvc
  SENSE
  SessionEnv
  SharedAccess
  ShellHWDetection
  wercplsupport
  Winmgmt
  wuauserv
  LOCAL
  BUILTIN\Administrators

  USER SETTINGS
  --------------

  The last time group policy was applied: 20/07/2016 to 22:36:33
  Group Policy was applied from: N/A
  Group Policy slow link threshold: 500 Kbps
  Domain name: OWNER-PC
  Domain type:

  Applied Group Policy objects
  -----------------------------
  N/A

  The following Group Policy objects were not applied because they were filtered
  -------------------------------------------------------------------
  Local group policy
  Filtering: Not applied (empty)

  The user is part of the following security groups
  ---------------------------------------------------
  None
  Everyone
  BUILTIN\Administrators
  Builtin\Users
  NT NT\INTERACTIF
  LOGIN CONSOLE
  NT AUTHORITY\Authenticated users
  This organization
  LOCAL
  NTLM authentication
  High mandatory level

  After you activate the hidden administrator account (which already had a defined password btw)

  C:\users\administrator>set
  ALLUSERSPROFILE = C:\programdata
  APPDATA = C:\Users\Administrator\AppData\Roaming
  CommonProgramFiles = c: files
  CommonProgramFiles (x 86) = c: Program Files (x 86) \Common Files
  CommonProgramW6432 = c: files
  COMPUTERNAME = OWNER-PC
  ComSpec=C:\Windows\system32\cmd.exe
  FP_NO_HOST_CHECK = NO
  HOMEDRIVE = C:
  HOMEPATH = \Users\Administrator
  LOCALAPPDATA = C:\Users\Administrator\AppData\Local
  LOGONSERVER = \\WIN-01J5F1J7NAH
  NUMBER_OF_PROCESSORS = 4
  OS = Windows_NT
  Path = c: Windows system32; C:\Windows; C:\Windows\System32\Wbem; C:\Windows\System32
  \WindowsPowerShell\v1.0\
  PATHEXT = .COM; EXE;. BEATS;. CMD;. VBS;. VBE;. JS;. JSE;. WSF;. WSH;. MSC
  PROCESSOR_ARCHITECTURE = AMD64
  PROCESSOR_IDENTIFIER = Intel64 family 6 model 23 Stepping 10, GenuineIntel
  PROCESSOR_LEVEL = 6
  PROCESSOR_REVISION = 170 a
  ProgramData = ProgramData
  ProgramFiles = c: Program Files
  ProgramFiles (x 86) = c: Program Files (x 86)
  ProgramW6432 = C:\Program Files
  PROMPT = $P$ G
  PSModulePath=C:\Windows\system32\WindowsPowerShell\v1.0\Modules\
  PUBLIC = C:\Users\Public
  SESSION = Console
  SystemDrive = C:
  SystemRoot = C:\Windows
  TEMP = C:\Users\ADMINI~1\AppData\Local\Temp
  TMP = C:\Users\ADMINI~1\AppData\Local\Temp
  USERDOMAIN = OWNER-PC
  USERNAME = administrator
  USERPROFILE = C:\Users\Administrator
  windir = C:\Windows
  windows_tracing_flags = 3
  windows_tracing_logfile=C:\BVTBin\Tests\installpackage\csilogfile.log

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• After the mistake of automatic updates 'there was a problem loading windows.

  OT: Error loading Windows.

  Error loading Windows, it's where my problems began. Windows was its automatic update downloads and when he finished and my computer says to restart when it restarted I got the message 'there was a problem loading of windows', and that's where it ended. For three days I would continue to try to restart my computer, and I had the same thing. Windows would not be responsible.

  So, I did a refresh, or everything what he called where he was supposed to completely refresh Windows without my lose all my files, but I have to re - install programs. It took forever for that to work, but he finally did and my computer was back to Windows 8 and when I went to the Windows store to download Windows 8.1 told me that I had to first download and install the updates. From that moment nothing works. It finally downloaded 123 updates up-to-date, but when he tried to install it like configuration updates do not turn off your computer. It would get 12% full and just stand there, literally for hours. If I turn off the computer and try to start again he would go immediately to the configuration updates, 12% complete and even once, just to stay there. Then he got to ' default configuration windows updates returning changes do not turn off your computer. " Now he sits there for hours. I tried turning stop then restart and it goes immediately to the failure message and returning change and just sits.

  What I'm doing, I've been without this computer for three days. I'm on my mac now, but my personal computing is done on the pc that will not start. Windows is undesirable. Someone help me please. I got so frustrated that I am about to go out and just buy a new computer.

  Help!

  If it was my computer, I would do a factory reset is in mint condition, only install the required update, KB2871389 (download links above), then immediately install the update 8.1 and the remaining plots.

  After these 4 things, the only thing I would do is then to save a system image backup so you never have to repeat these steps.

• The yellow icon appearing again after the installation of Windows updates.

  Original title: Windows Update

  I went to the Start Menu and click on Windows Update.  (Microsoft Update is the real screen name.)  I clicked on Express - Get high-priority updates (recommended).  Microsoft Update now says the following: check the latest updates for your computer...  After a while the rescued and install updates appear; then I click on install updates.  Installation of updates window appears with this message: the updates are being installed.  Installstion status is reproduced below.  Extraction of the files sometimes on the screen.  Often I do it the short way; in other words, I click on the yellow at the bottom of the screen, and updated icon Instaliing up-to-date displays.  Long or short path, the yellow icon is displayed again after some time.  Why?  Also, why the rest yellow icon even after having this?

  Sincerely,

  KathyNortonKS

  Hi KathyNortonKS,

  Have updates you tried to install?

  Method 1:

  You can view the history of update to see if recently offered updates are installed or not.

  a. click Start, all programsand then click Windows Update or Microsoft Update.

  b. on the Windows Update Web site or on the Microsoft Update Web site, click view update history. A window opens that displays the updates that have been installed or that have failed to install on the computer.

  c. If you see updates failed, double-click updates failed to check the error codes.

  Method 2:

  You can read the following article and run the Fixit:

  The problem with Microsoft Windows Update is not working

  Method 3:

  You can also read the following article and perform a full scan on your computer by using the Microsoft Safety Scanner.

  Microsoft safety scanner

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• Computer stops after the installation of security update KB2393802

  I'm 'rebuild' an old computer Gateway E-4600, to give via a local social agency.

  OS is XP Home, and the product ID of the COA is valid.

  I'm writing this, I'm in the middle of the 3rd attempt to get all of the updates to install * without * preventing the closure of the computer.  Each facility has given me minor differences in available updates, but I was not sufficiently detailed records of what was suggested to be more precise in these differences.    I'll know better here on out!   Laughing out loud

  I didn't know that a problem existed in the judgment until I was almost done with the first reconstruction, which included the installation of the software.

  During the reconstructions of the second and third, I largely used the system restore to isolate any problem and found the following:

  KB 2393802 for Windows security update prevents the computer from closing with the closure of the XP Start Menu or Task Manager.  The only way I found to stop it is to hold the power button on or unplug the computer.  I don't actually unplug the unit, but that obviously has to work!   Laughing out loud

  More interesting still, the article refers to Intel and AMD graphics cards, and this computer has a graphics card from NVIDIA GeForce2 MX/MX 400 (via Belarc Advisor).

  I'm still trying to find an answer online, but nothing so far.

  I can't give this with this problem :-(

  I would like to know the answer to one or both of the following questions:

  1. Why Windows/Microsoft Update tells me to install an update for a graphics card that is not installed in the computer?
  2. How can I prevent Windows/Microsoft Update listing and want to install the update that is as a manual or automatic installation install?

  Thoughts and suggestions?

  Yes, I'm still 'watching' this thread.

  My answer 11 - Aug 31 is still standing.

  Hi, PA Bear.

  Hallelujah, it's fixed!    : grin:

  While working with the technical support of MS, I discovered by chance that the computer turns with KB2393802 installed if the computer is disconnected from the internet.   AKA, unplug the Ethernet cable from the computer.

  Finally, I started to wonder if the question can be hardware and not software.

  So I started picking at glitter and for me, it means generally try the easiest to accomplish the solution first.   Laughing out loud

  It was a replacement of the CMOS battery, but that didn't work.  I really didn't think he would, but hey, it was the best thing to do.

  I was going to swap hard drives, with a new installation of Home or Pro, but then I realized that it was still easier to swap the Ethernet card.

  I deleted the Linksys card (the latest version of the driver is already installed) system drew the card and dug an old map SMC EZENET of the pile of junk.  (Who doesn't have a lot of junk!   LOL) went scrounging for a driver online and got that installed, then used the device to update manager the driver, and the rest is history.

  I shut down the computer at least 10 times since (I kept a detailed log and when I hit 7 successful stops I stopped making new entries) and it worked fine every time.

  This could be something to the file in memory banks trivia!    Laughing out loud

  Thanks for the help and suggestions.

• restart after the installation of windows updates

  After a reboot after you download 3 updates my computer is stuck at configering 3 0f 3 updates 70% and will not move. I tried (after waiting several hours) to restart the computer but it only gos to 3 of 3 70%.

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  Then:

  Click Start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the bad.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• Outlook 2007 POP3 problems after the installation of security updates

  After the updates of security for December 2010 has been installed on my computer, my Gmail POP3 does not. My access code are rejected.

  The i uninstall KB2288953 and after this operation bit is working again.

  See...

  • Microsoft Outlook 2007 may have problems to send/receive or performance after a recent update has been installed on the computer (17 Dec-10)
    http://support.Microsoft.com/kb/2485531

• Problem: My computer hangs and does not restart after the installation of MS Update KB2479628.

  Tuesday February 11 I turned my hp Compaq nx7300 off I saw that she was installing updates I thought that nothing of what I had set to automatic updates. On Wedndesday that I have tried to re - turn on my laptop it installed updates. I got a black screen with white writing. The laptop then ran restoration of boot, but he was not able to repair itself and turns off. I tried to turn it back on a few times that I was in total disbelief that a MS Update would do this to my computer, it still does not.

  I tried to start the computer in safe mode, but it does not work.

  I tried to do a system restore but evertime I tried it there was an error, I tried all eight restore points but all back "an unspecified error occurred during system 0x800700b7 restore.

  "In restoration of start I clicked on ' view diagnostic and repair details" it said all tests have been performed with success, but at the bottom it says ' root cause found - boot critical file D:\Windows\system32\ntkrnlpa.exe is corrupt.

  I had to reinstall windows 7 pro three times so far and have now developed to the point that it is KB2479628 update of MS that is causing the problem. I the have not installed this time and have had updates to the manual

  What can I do about this problem, I spent at least 20 hours on this problem now, and looking for the many other forum of people seem to have similar problems. I'm worried that KB2479628 will settle by accident when I want to install some other updates?

  My computer laptop originally had Vista Business top but has been upgraded to Windows 7 32 bit, clean install, I use Microsoft Security Essentials, I've never had installed norton or macafee.

  Thank you very much for all your time and your help is greatly appreciated, I'm sure I'll be at the time when SP1 is available.

  Until then your your :-)