Recovery - clean install or copy of the image discs?

Similar Questions

• Copy of the image works only disk based backups?

  DB version: 11.2
  
  What is the command to SWITCH DATABASE to COPY for?
  
  In the thread above, I have in the whole of clause SWITCH used with COPY of IMAGE
  
  Example provided by Julien
  

  You can also switch a datafile
   
  for example;
    
  RMAN>sql ‘alter database datafile 2 offline’;
  RMAN>switch datafile 2 to copy;
  RMAN>recover datafile 2;
  RMAN>sql ‘alter database datafile 2 online’;

  I understand that if you COPY of IMAGE backups and if you lose your data files, you can switch to the image immediately RMAN backup then recovery will be quick.
  
  So, it means that the COPY of the IMAGE of RMAN cannot be made to the drives (no tapes). Right? That is to say. If it is in the band then

  RMAN>switch datafile 2 to copy;

  will take a while. Right?

  You don't want to go to a copy on tape because the band does not provide random access (and certainly will not support simultaneity)!

  AS a BACKUP COPY can be done on the disc.

  http://docs.Oracle.com/CD/E11882_01/backup.112/e10643/rcmsynta007.htm#CHDEHBEJ

  "A copy of the image is an identical copy of the byte to byte in the original file. You can create backup image files of data, copies of data files and archived redo logs. Copy the image files may exist on the disk. »

  Hemant K Collette

• Make a copy of the image of laptop

  Try to make a copy of the image from my laptop with Windows 7. Error appears saying failed, because not enough space on drive hard usb. I tried two hard drives and both came with the same error. Concert need 47 for image and yet two spare HDDs have more than 145 concerts. Why he not continue. With the help of DVD would be endless.

  http://www.Macrium.com/reflectfree.aspx

  https://www.YouTube.com/watch?v=KQA7NlLvxg8

• Collection of Nik and view the modified copy of the image. Virtual copy - where is it?

  Once I have reduce noise in an image using Nik Colllection set 2 and save, I'm back in Lightroom. However, I do not see a copy of the image, that I worked on-I see yet only one image and it's the original image before exporting to Nik set 2.

  In addition, I note that I do not see virtual copies I was doing once I had created one in the film strip. However, when I save a virtual copy, I get the message saying 'Virtual copy 2' created. If I repeat the process of creating another virtual copy, I get the message saying "Virtual copy 3" created.

  I have two questions.

  1. How can I see the edited picture in the film strip that I applied 2 set to?

  2. How can I see the virtual images in the film?

  I have changed a setting somewhere... Can someone please offer advice?

  Start at the beginning:

  When you call Nik programs within LR, you create a TIFF file with or without LR adjustments, then the Nik tool is created. When registering save you to this file. This file is part of your LR database.

  By creating a VC, you create a VC in the current folder, which is seen from the Interior of LR, but not outside. But it's the LR database bart.

  What I suspect is that you work from within a collection and especially the last imports collection. I would suggest pointing to an image with the right button of the mouse and using the "go to folder LR" (from memory!). There you should find all your files. (Nik) TIFF files should also be available to the OS (Finder or Explorer).

  The other possibility is that you have applied a filter to display only certain images, and files of VC and Nik files get hidden by the filter.

• I would like to install a copy of the CS6 on mac with os x and pc with WIN7. Is this possible?

  I would like to install a copy of the CS6 on mac with os x and pc with WIN7. Is this possible?

  In order to use it on Mac, you will need to purchase another license for Mac.

  Purchase CS 6 Creative Cloud now includes Creative Suite Master Collection and Design Premium features

  Or, you can go for creative cloud that you can use on both machines Alternately, one at a time. Pricing and membership creative cloud plans | Adobe Creative Cloud

• Can I get another copy of the installation discs to use with my product key?

  I bought a copy of XP Media Center in 2008. Recently, I tried to install it for the first time and received a message that windows needs to run the files are missing. He installed windows and ran for a few weeks now to start it flashes a blue screen for 1 second and then tries to restart again. Can I get another copy of the installation discs to use with my product key?

  Unfortunately, Windows XP Media Center has been removed and the installation of replacement discs are no longer available.

• Question seeks to clean install 10 Windows on the drive of the merger. El Capitan.

  Problem: try a clean install of Windows 10 via the Boot Camp Assistant on an iMac 27 inches (Late2013) with 10.11.4 installs hours (more than 8 hours) and then failed to install Boot Camp updates. Essentially installation take much long than normal and cannot install updates of the Apple software or create normally start Windows Boot Camp 10.

  Background: After problems of slowing down after upgrading to 10.11.4 (with improved Bootcamp Windows 10) who had previously worked fine for 10 months, to the point of a start of OS X time, I decided to do a clean install of my iMac with Fusion 3 to disk.

  As I was unable to remove the partition from Boot Camp through BCA because of his holding always at the same load, I used Internet recovery and reset the Fusion drive. This then required me to repair the partition of Fusion by car through THE "fix" option which seems to work very well. And reinstalled OS X 10.11.4 which works fine now (delays etc..)

  Try using BCA to create a new partition Boot Camp and a clean Windows 10 install after downloading an image of disk W10 directly from Microsoft (Win10_1511_1_English_x64), BCA by downloading software updates and by selecting the desired partition, it began to restart and initialize the installation. However the whole process has been very slow, each step takes much longer than usual, to progress. Leave for hours rest a blank screen or with a circle of rotation.

  I tried with another stick USB 3 and also a USB 2 stick, but none has made a difference.

  In the last attempt, I left running overnight and after 8-9 hours, he finally reaches the top of desktop Windows 10 and the update of Apple Bootcamp starts to load updates. However, he just hung and even after 2 hours, nothing was. Reboot and try once again has been the same.

  After that I tried to create a Windows Installer via BCA 8.0 however it gives just a TPG error when you try to select the drive (due to el Capitan I guess?)

  After four days of efforts, I'm a loser on how to get the Windows 10 on the Boot Camp partition. I can't even install W8 and upgrade due to the error of TPG.

  Any help or suggestions how to proceed with the diagnostic / resolution of the problem would be appreciated.

  Details:

  System: iMac (27 inch, end of 2013), 3.4 GHz Intel Core i5, 16 GB 1600 MHz DDR3, NVIDIA GeForce GTX 780 M 4096 MB, OS X 10.11.4

  • Nothing other than the keyboard and mouse attached via the USB ports, as well as the key USB of BCA. No other attached devices.
  • Reset memory NVRAM, SMC and ran more than once disk utility. No problem not reported.  Ran NVRAM reset before each attempt.
  • At ran EtreCheck report which seemed OK.
  • Verification of diagnosis ran who is childless.

  A detail I noticed after the merger by car there are now two Macintosh HD images when you use boot option. One previously. Are named "Macintosh HD" and "Macintosh HD2". I remember being Yosemite simultaneously in three, but which has been fixed in an update.

  In addition, it seems that no recovery partition. Cmd + R lance Internet recovery.

  Distill the results (the Boot Camp partition removed):

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage GB internal drive 121.0 disk0s2

  3: disk0s3 Apple_Boot Boot OS X 134,2 MB

  / dev/disk2 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 3.0 to disk2

  1: disk2s1 NO NAME 209.7 MB EFI

  2: disk2s2 Apple_CoreStorage TB 3.0 drive internal

  3: disk2s4 Apple_Boot Boot OS X 134,2 MB

  / dev/disk3 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD + 3.1 TB disk3

  Logical volume on disk0s2, disk2s2

  7BE1F343-ACBE-4144-BF86-C838BE1E49D4

  Fusion unencrypted drive

  iMac - simon: ~ list of cs simon$ diskutil

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group CA0B8D0A-6315-4E85-B313-52AB509473F2

  =========================================================

  Name: Internal drive

  Status: online

  Dimensions: 3121237860352 B (3.1 TB)

  Free space: 0 (0 B) B

  |

  +-Physical volume 5E75EE74-EE1F-4FCB-A0C5-9ED5517FEB93

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 120988852224 B (121.0 GB)

  |

  +-Physical volume 91D639D6-634E-47C1-AFE5-616CE12E71E0

  |   ----------------------------------------------------

  |   Index: 1

  |   Disc: disk2s2

  |   Status: online

  |   Dimensions: 3000249008128 B (3.0 to)

  |

  +--> Logical volume family EE9934AC-F3CB-4101-ADB6-576F4371B4B9

  ----------------------------------------------------------

  Encryption type: no

  |

  +--> Logical volume 7BE1F343-ACBE-4144-BF86-C838BE1E49D4

  ---------------------------------------------------

  Disc: disk3

  Status: online

  Size (Total): 3106705375232 B (3.1 TB)

  Reversible: no

  Name: Macintosh HD

  Volume name: Macintosh HD

  Content indicator: Apple_HFS

  LVG Type: Fusion, sparse

  Summary:

  Q1: Should it take 4 + hours to install Windows 10 via BCA?

  Q2: Al must ultimately be so slow when initially W10 desktop?

  Q3; What I do once I arrive at the office of W10 but it automatically updates the graphics driver as BC update is simply suspended for centuries and get a working driver to restart at least W10?

  Q4: is there a problem with the disk HARD the Drive of Fusion that is causing all this delay and slow install / boot? ON the clean install OS X 10.11.4 it is back to be fast as usual and all tests show things are OK but W10 goes on the part of the HARD drive. No way to verify this beyond diagnosis or Etrecheck?

  Q5: Y at - it no problem with the GPT / MBR that may be causing the delay etc. ?

  Q6: How can I use my existing WindowsImageBackup backup from the previous W10 with the BCA install usb drive or how to create a USB stick otherwise recovery disk with my other single Mac have W7?

  Q7: How can I install W8 as I once did on Yosemite, via el Capitan without a mistake to TPG on selection of disc?

  Details:

  Day 5. Attempt at 6.

  Partition Boot Camp delete and try again install via BCA. First question, is that when the startup it goes to a blank black screen. For a time nothing left. Reset then using alt to select windows training results in almost instantaneous startup of the BCA message created and the beginning of the installation.

  4 1/2 hours from start of Windows 10 initial signature window.

  Then the second question. One to reach the Boot Camp update Office tries to start and install the drivers. Allows you to "list files...". "stage then sits at the bar about 5% green for 1 to 2 hours and does nothing. All actions in the Office of the W10 takes ages.

  In the meantime, auto update of the W10 appears a message saying that the updated graphics drivers as one of the few messages or actions during this period. Looks like Nvidia install with the entire package of experience (unwanted) etc. and very probably not the correct gpu driver.

  Finally deciding to cancel the installation of BC by killing the Setup.exe process. Then copy Boot camp install files on the desktop. Lasts 30 minutes to copy. Run again and this time, although taking 15-20 minutes to download and install later with the success message.

  Check the graphic driver it shows a yellow exclamation mark, so the following Microsoft instructions I use the uninstall option via the device and then Manager (slowly) come on board to load and download the latest Nvidia driver on their site for the GTX 780 M for 64-bit W10 etc. The same thing that I had used previously. Slow with running the Nvidia Setup program again, but eventually it works only to say that he could not install as unrecognized graphics device...

  He ends up with Microsoft PnP driver so it's at least sufficient start and run it again BC of the figure updates as all other drivers have been installed. To restart, but I get an error of K-Mode that is most likely related to this driver graphic and not possible to start in the new W10 Boot Camp partition after 7 hours.

  I have a picture of W10 backup recovery (WindowsImageBackup) I've had in a few weeks, but it will not install bet for the installed W10. I try with the ACO created the USB windows but can't seem to get a way to get into recovery mode and to get the menu to install it. I don't have a way to create a USB W10 recovery key now because my other Mac has just installed W7.

  Finally I tried to count a reset of the Recovery boot up option but it seems that it will take longer to start.

  I also went to the recovery and selected Boot Mode safe, but it opens on an empty black window and he's here doing nothing.

  Looks like I'll have to restart on via BCA and reinstall and try and solve the problem of graphics in order to install driver updates from BC and restart to W10 and hope that with the drivers, it returns to the operation and the normal starting time. Then update the gpu driver.

  I used and installed Boot Camp several times with over the years including previously an upgrade of W8.1 > W10 I used for over 6 months without problem. I've never known these installation very long or ice once in Windows even for the initial start upward.

  For any help or suggestion would be appreciated, and this seemingly simple process has now expanded to five days.

• I have a WIndows 7 Ultimate operating system failure and required a drive for a clean install. I have the product key, but Microsoft offers no English option.

  I have a Windows 7 Ultimate active computer that was swarming (STRONGLY) of malware/virus/junk files/adware...

  I think I have cleaned out, but want to do a clean to be sure install, but I have no partition recovery (may be erased by a virus?) and no recovery dick.

  I went to the Microsoft website and entered my product key.  He has been recognized as Windows 7 Ultimate, but when I had to choose a language, English was not available.

  Any solution, or should I continue to use the computer and all hope is clean?

  EDIT - I installed the windows 10 (using an ISO image) on Windows 7.  I do not enter the product key when asked (the program said I could jump at this stage of the installation).  Installation went well.

  I then checked to activate Windows 10 - it activated without any difficulty.

  I will now try a clean install...

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

• Windows XP Clean install... copies the files and then restarts... Never installed!

  I've recently updated some hardware in my PC, a new Gigabyte motherboard and an AMD Dual Core processor. Here are the specifications of what Im running:
  • GIGABYTE GA-MA74GM-S2 AM3/AM2 + / AM2 AMD 740G Micro ATX AMD Motherboard
  • AMD Athlon X 2 7850 Black Edition Kuma 2.8 GHz Socket AM2 + 95W Dual-Core processor desktop AD785ZWCJ2BGH - OEM
  • 160 GB Sata hard drive
  • ATi 512 MB graphics card
  • 1 GB OF RAM
  • Generic CD-ROM drive base

  The rest is all pretty basic stuff... fans, etc heat sinks. It's pretty much a budget box, so there is nothing too special about it. I thought that I restart it come and go, but the process of starting always led me through the boot of MB, then to "loading of the operating system", then restart everything again.

  I did the walk through for clean install of Windows XP and everything goes well until it comes time for the operating system to install.

  1. Boot from CD
  2. Setup Windows XP now
  3. Delete the existing partition
  4. Create the new partition
  5. Choose the location and format of partition
  6. Copy the files in Windows XP

  The copy goes by fine... but after that is where the problem starts. Instead of going to Windows Installer, it will restart the PC.  After the reboot, it goes through the whole process that I mentioned at the beginning of this problem.

  What I am doing wrong?

  Hello

  Once the files are copied when the computer restarts automatically do not press any key to boot from the CD again and let the computer automatically launch the next step. Also remove any external devices attached outside keyboard and mouse.

  I hope hear from you soon!

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• XPS 420 - HARD drive failed, performing a clean install of Vista on the new HARD drive.

  Hey everybody,

  My on my XPS 420 HARD drive failed and I'm trying to reinstall Vista using the disc that came with my machine back when I bought it.

  I bought a new WD10EZEXAZ (1 TB Serial ATA HDD), he rose in the same dwelling as my old HDD (ST3750630AS * Barracuda 7200.11*). I start the PC and goto Setup, it recognizes the HARD drive in the blue menu.

  Then I boot with the CD of Vista that came with my system. I proceed as indicated through the following url:

  Clean install of Vista

  After its copied files, expanded the files, installed features, updates installed... it goes to "Complete Installation" and throws an error message: "Windows Setup could not configure Windows to run on a hardware on this computer."

  I tried a few things I've seen posted on the internet, including trying to run msoobe.exe via command line. When I did, it allows me to Setup user... but finally I get sent to this message of error or another telling me I have to reinstall Windows.

  I read else where some hard disks may not compatible with the Dell disk provides with my OEM machine. If this is the case, can someone advise? I really didn't want to spend $100 one another on a Windows 7 disc, but I feel like this may be my only option... but even in this case, I'm not so sure this will work or the other.

  Any help would be greatly appreciated,

  Tony

  UPDATE *.
  Did some more research, I discovered my new drive HARD is an advanced HDD format... not sure if it has nothing to do with my problems (by www.wdc.com/advformat Vista should not need to perform the work before the OS being installed), but thought I would mention it.

  Thanks again for any help.

  ****************

  Seems that I found the solution to my problem.

  Problem has been fixed by going into the BIOS and change the Mode of Port SATA to IDE/native/AHCI native. After that, the installation worked without any problems. Seems that Windows Setup did not like the port mode is set to RAID.

  Just thought I would post back everybody incase has had the same problem.

• Print screen - when I use the print screen key and then the paste into Word by pressing Ctrl v, I do not receive a copy of the image, but get a little red square about 1/4 "which does not contain the image.

  Can you tell me what causes this?

  Hi Kurt,.

  Thanks for posting your question on the Forums of community of Microsoft.
  I understand from the description of the issue, that the images stuck through the print document screen Word does not display.
  Let me go ahead and help you with the issue.
   
  Please answer these questions, which will help us to help you best.
  1. don't you make changes to the computer before the show?
  2. what version of Microsoft Office is installed on the computer?
  3 are you facing this problem in Word or other programs?
   
  I suggest for the link and follow the steps in the article:
  A red X character appears when you paste a linked image in Office 2003
  http://support.Microsoft.com/kb/825772#appliesTo
   
  If the problem is specific to the Office programs, you can also post the query Office Forum.

  Check out the link:

  http://answers.Microsoft.com/en-us/Office
  
  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• Windows xp hp will not start. error message: Windows has not start because the following file is missing or corrupt: < root windows > \system32\hal.dll. Please re - install a copy of the above file.

  Hello, I recently restored my windows hp tower to its factory because of virus settings and when I restarted my PC I recieced this error message: Windows has not start because the following file is missing or corrupt: \system32\hal.dll Please reinstall a copy of the above file.  where can I get a copy? and is it possible to download the start software and burn it to a cd?

  Hi FRANKGRIMES_945,

  What is the model of your computer?

  (a) you can try to arrange for a Windows XP disk that corresponds to the same edition, as it is installed on your machine.

  (b) thereafter, follow this link & check if you are able to start correctly on the desktop.

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  Hope the helps of information.
  Please post back and we do know.

• Clean install of Vista, receive the error code: 0x80070005

  So I'm trying to do a clean install of Windows Vista, so I can clean all of my system files. I inserted the original disc supplied with my computer, installation is initiated, and then it stops and displays this error code: 0x80070005. That is to say that he does not communicate with the internet, which it is. I wonder how I should do my own insatll ASAP?

  Hi ClintBeastwood,

  Please see the thread with a similar problem and fix possible:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_install/Vista-SP2-will-not-install-error-0x80070005/1dd761d3-8632-457C-be8c-f880b883a61e

  I hope this helps!

• Problem installing old copy of the PS CS4

  I bought a student version of Adobe Photoshop CS4 Extended with "Learning Adobe Creative Suite 4" around 2009. I have the installation disc, product code and serial number. I recently got a new computer Windows 10 and I could not install my copy of Adobe Photoshop CS4 Extended on the new computer.

  I keep getting error messages such as 'one or more required components of Adobe Photoshop CS4.' failed to install properly I made sure there are no other programs running while trying to install PS CS4. I disabled my anti-virus and firewall while trying to install PS CS4. I tried to restart the installer and I tried to restart the computer. I always get the same error messages and cannot complete the installation.

  I appreciate any help you can offer.

  Make the programs more compatible with this version of Windows - Windows help

• How to copy / paste the Image

  I received a PDF file with an image only - no text.  I would like to copy / paste this image twice so that I find myself with three of the same image on the page.  Adobe TV makes it look so easy, but I noticed that there is an area of text around the image. The image I have is not in a box.  I can put a box around it somehow, or is there another way to copy and paste? Help, please!

  By copying and pasting an existing image in the same PDF are not really simple in Acrobat X. First, select the image with the selection tool, then right click and select copy the Image. Next, you'll need navigate to the comment pane and click the stamp tool. and select Paste the image to the Clipboard as stamp tool.