Recovery mode is weird.

Similar Questions

• HP recovery mode first V13 = brick

  I tried to update the time on my computer, but when I connect the first for the HP connectivity kit it bricks that the calculator with the first HP V13 recovery mode and HP connectivity kit is waiting for connection.

  I just updated the kit of HP connectivity with firmware 20141203

  Hello

  The recommended procedure is listed below.

  However, sometimes connection problems can cause updates failed, try the following:

  Try a different USB port on the 1A)

  1 (b) If you use a USB hub, try without the USB hub

  1 c) If you do not use a USB hub, try a USB hub (weird I know, but one person mentioned it helped)

  (2) try another USB cable (no matter what standard USB cable, with the same type of connector should work)

  After installing the connection kit, the next update method is recommended:

  • Connect your HP Calculator first via the supplied USB cable (connected directly, do not use a USB hub)
  • Start the HP connectivity Kit
  • Click the tab of the calculator
  • Right click on the name of the first HP you want to update (it would be that you connected before starting this procedure)
  • Write down the version number, and then click the OK button
  • Click the Help Menu and select Check for update
  • Look for the pop-up box to update, check the version number that is newer than the one you want to update.
  • Then click on the download button
  • That's it, you will see the update being loaded and installed on your calculator screen. Don't click too quickly out of the HP Connectivity Kit, wait a minute or two after the completion.
  • In addition, there are a step in the connectivity Kit where it is advisable to back up the version that you had before the procedure, just in case. This way, you have a way to cover again.

  Best regards.

• Terminal Server is missing from the recovery mode

  Does anyone know how to start the terminal in recovery mode? Apple support says it should be in the menu as before (boot with command-r) bar, but all I see is a language selector and no option to choose a language or continue.

  

  I see it when I start in the Recovery HD.

  It is possible that your Recovery HD is corrupted. Have you tried to reinstall macOS Sierra on itself? It will rewrite your HD Recovery. You are not hurting your data, user accounts or applications. But a system save before the reinstall would be a good idea.

• stuck in recovery mode tastu cannot restore or update

  iPod touch stuck in recovery mode tastu not allow the update or restore.

  Follow the troubleshooting steps in this document support. If you cannot update or restore your iPhone, iPad, or iPod touch - Apple Support

• On my MBP, 2011, bar menu in recovery mode to offer only one option - selector of language. How do you get Terminal? Missing something?

  On my MBP, 2011, in recovery mode menu bar offers only a single - switch language option. How do you get Terminal? Missing something?

  You will need to choose your language first.

  From there on, the Terminal will be on the menu drop-down utilities > Terminal

• How to access Terminal Server in the Sierra recovery mode?

  Hello

  I started just Sierra in recovery mode and the terminal is missing from the menu.
  The main installation window has the usual restore, Reinstall, help and disk utility. But in the top menu, there is nothing else than "language Chooser". Terminal disappeared.
  (The material is a 2011 MBP 15 ")

  Help!

  If you click on the language selector and then cross the bar of menus, correct menus appear actually?

  What would you say if you select an item in the language selector, then select a language?

  I only so this menu appears briefly, so I don't know what is in it. It should disappear and be replaced by the normal menus.

• I can not fire first aid in Recovery Mode

  I upgraded to Sierra this afternoon. Because I'm disorder obsessive-compulsive, I ran first aid on Macintosh HD, despite the quite well running system. Said disk utility it found corruption, and should I run first aid in Recovery Mode. I restart, press command + R and go into Recovery Mode. I open disk utility, but I can't select "Macintosh HD" to perform first aid. It is grayed out.

  How can I select Macintosh HD in Recovery Mode to run first aid?

  When mode of recovery, that on the mac? (Apple menu, about this mac)

  have you tried r instead of command + R?

  You have a time machine backup drive? If so, can you boot option for that?

• Phone not restart or update in recovery mode

  my phone is in recovery mode, but I tried hard redefined and iTunes on windows and mac. but did not work. Help, please

  Have you tried a hard reset, or you tried to do a restore? Basically, once your phone goes into recovery mode you must plug it into a computer with iTunes installed and restore it.

• How can I update my iphone 6 s to the ios10, it is now in recovery mode

  When I want to update via itunes that arising out of the message that is updated to ios 9.3.5 but I want ios 10

  If you are unable to update or restore your iPhone, iPad or iPod touch - Apple supports

  In these situations, you may need to use recovery mode to restore your device:

  • iTunes does not recognize your device or says that it is in recovery mode.
  • You see the Apple logo on your screen for several minutes with no progress bar.
  • You see the connect to iTunes screen.

  Use the link above and see if your problem is solved :)

  If there is an error during the update process:- If you find an error when you update or restore your iPad, iPhone or iPod - Apple Support

  If there is an error and the problem code:- assistance with iOS update and restore errors - Apple Support

• My iPhone 5 c is stuck in recovery mode

  I have updated to iOS 2 10 days ago, and today I was listening to music on my phone, when all of a sudden it turned off and the Apple logo came. I thought that if I waited a few minutes, it will restart but it didn't. I then tried to reload, but still he wouldn't do anything. I looked on the internet what to do and did exactly as he told me: I have it plugged into my laptop with a port USB. I pressed the lock and the "home" button and then release the lock. iTunes came on my computer screen laptop and said he found my device in recovery mode. I tried to restore it had worked and my phone had turned his back I started setting up and after connecting to WiFi he started to connect to iTunes. I don't know what happened after that, as long as my phone is turned off suddenly. I went through the process of restoring it again, to see what it kept disconnecting after the software update. I tried several times but the Apple logo keeps appearing on screen and nothing happens.

  I risked losing all my data that I have not backe

  This IIIaass suggestion in this thread:

  My iPod 5 is on the recovery mode, how do I get it out of recovery mode

  can help.  In particular, the last step:

  Try the following. You will probably need to try to let the battery completely down

  - iOS: do not respond or does not light

  -Also try DFU mode recovery mode post-test

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

  -Try a different cable

  -Try on another computer

  S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

  Shop Apple Store - Genius Bar

• After download iOS 10.0.1 from mac recovery mode

  After updating to iOS 10 my iPhone 6 s to the recovery mode. I connect it to my iTunes and it said iOS 10.0.1 must be downloaded. Anyway, I have download it again but to extract process disconnects my iPhone iTunes. I have the latest version of iTunes, and even if I want to restore this happen. My phone won't turn on either.

  Follow these steps to resolve the problem with the recovery during the installation of iOS 10 mode.

  1. Connect your iPhone to your computer via iTunes.
  2. Wait about 30 seconds to let iTunes your reading device.
  3. Click Update on your computer when you are prompted, who, "is there a problem with the [device] who forces him to update or restore."
  4. Again click the update on your computer when you are prompted, "If your [device] is unable to be updated, you need to restore it to its factory settings."
  5. Click on restore if you see «your iPad cannot be updated...» "(you won't necessarily have to restore).
  6. Click Restore and update to confirm that you want to restore your device to its factory settings.

  You can also use this information to solve the problem If you see an error when you update or restore your iPad, iPhone or iPod - Apple Support

• iPhone stuck in Recovery Mode 6s

  I have updated to iOS 10. When I came back to my phone, it's in recovery mode. I kept restarting. Still stuck. It takes forever to restore on my computer, it ALWAYS does. I don't know if this has to do with the fact that my phone has had betas out there, but now I turn here: what's next?

  Hello malcolm229,

  Welcome to the communities of Apple Support!

  Looks like you were previously running iOS 10 beta and now have problems updating your iPhone to the public version of iOS 10. We can see you iPhone seems to be in both recovery mode and you cannot move forward.

  We know that unexpected situations, as are not optimal, but we are here for you!

  At this point, if you have not already done so, you will need to follow the steps described in the article below to restore your iPhone and run the public version of iOS 10.

  Any software beta iOS - Apple Support

  Back to the current version of the iOS

  If you want to come back to the current version of the iOS using iOS beta, follow these steps:

  1. Make sure you use the latest version of iTunes.
  2. Put your device in mode recovery and restore it. If you enable find my iPhone, enter your Apple ID and password after restoring to activate your device.
  3. If you are unable to finish the restoration, get help.
  4. Once the restore is complete, you can configure your device to your backup archived. This backup must be from an earlier version of iOS.
     

  If your device is equipped with a version beta of iOS and you return the device to a previous version of iOS, that you can not restore your backup. This can happen if the backup is from a later version of the iOS. For example, if you restore your device to the current version of the iOS and try to use a backup that you created using a beta version of iOS.

  We realize that your iPhone is already showing connect to iTunes chart on the screen, but the work through the steps as described here to try to resolve the problem.

  Have a nice day

• Recovery mode

  We tried to make the update iOS 10, but he went into recovery mode. As we are away, we have no access to iTunes. Any ideas on how we can restore?

  Unfortunately, you will need a computer to get out of Recovery Mode. If you do not have access to one, you can try to go to an Apple Store or a library. You will need to see if the library allows to iTunes on the computer. You need the latest version.

• How can I exit the recovery mode when I updated to iOS 10? !!!

  How can I exit the recovery mode when I updated to iOS10?

  Connect the device to your computer and use iTunes to reapply the update.  It worked with my Pro iPad after I first tried to live update. He went into recovery mode, so I had to download the update in iTunes and updated (new), but he returned right after that.

• 10 IOS recovery mode

  Update to IOS 10 on ipad pro and iphone 6s, going into recovery mode.  Good job Apple!

  Hope my new iphone 7 comes without the recovery mode pre installed.

  You are not alone.  Hope you find some consolation in that.