Photosmart C310A not to connect to my router.

Similar Questions

• My photosmart c309g-m is connected to the router by ethernet cable. Can I add?

  My photosmart c309g-m is connected to the router by ethernet cable.  Can I still add to e-print?

  Hello

  Is a printer ready ePrint? You can use the home router to access the internet? If Yes and Yes, then you should be able to do.

  Kind regards.

• Photosmart 5520: Not internet connection post update download

  5520 new. Connected to internet and downloaded straightup update. Now I get "server connection error... check the connection etc. This is done via the touchpad printer so the browser interface. Then... no ePrint or possible applications. Direct wireless for devices works fine.

  Could it be a corrupted download of update? Anyway to force a reinstall?

  Any thoughts?

  Let's define an external static IP and DNS address for the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS. It's Google DNS. You can choose a different external DNS if you wish.
  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

• Photosmart D7460 with wireless does not work with Win. 7 ultimate connected to the router

  I have a desktop HP upgrade to Windows 7 Ultimate and the new HP printer driver has been downloaded and installed. It seems to print via the server message/controller but is never to the printer or to a file if this opton is selected.  I have also a laptop on group residential network running home premium 7 and same driver.  It works very well to the same printer.  The printer is connected to the wireless router as it is the laptop.  The office is connected to the router.  Any suggestions appreciated that I'm obviously above my head.

  Thank you

  Jackie Draffen

  NO I haven't installed upgrading to windows7 after problems with her 7 installed.  I think it worked a little but only showed 3 ink levels and other problems

• HP Photosmart C310a will not power off no response on the screen is

  I have the HP Photosmart C310a months which will not power off or answer unless I have remove the power cable of the whole or to the back of the printer.  Using the Wi - Fi connection, so there is no usb to printer cables.

  This widget could not be displayed.

• printer photosmart-309 is not to find the wireless router

  printer photosmart-309 is not to find the wireless router.

  the wizard will search, then once outside.

  the radio is on.

  suggestions?

  Sorry, but your wireless radio is dead.  You can always connect via Ethernet to your router.

• Photosmart 2610xi not connect to Airport Express Terminal via USB

  I recently bought a MacBook Pro and the Airport Express.  In the past my Photosmart 2610xi was connected to my Mac Mini with a connected Ethernet cable directly on my Linksys router.  I tried to connect my printer to the Airport express with a USB cord, and while my Airport Express is the printer can't seem to connect.  When I print something the document hangs in the queue with the words 'connection '.  Any help would be appreciated.  Thank you.

  Why are not you connect the printer to the airport with Ethernet?  It is the only way to get both printing and scanning.  USB will support printing only.

  Have you tried to delete and add the printer in the print queue:

  -Sys Prefs, Print & Fax
  -Select the printer in question and click the sign less down the list
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

  If this does not work, do the same thing, only instead of the second stage, right (control), click the box of the print queue and select Reset Printing System.

• HP Envy 4500: Printer connected to the router, but will not print wireless Macbook

  I want my wireless printer to work on my macbook, but I can't. I tried setting up on the HP utility to connect with the router as the mac and printer on but it does not work! It indicates that the download was successful, but the device was not reachable. I don't really know where to go from here and any help would be really appreciated. Thank you.

  Hey @miriamnimmo,

  Welcome to the Forums of HP, I would be happy to help you! I understand that you have the printer set up on your network, but the software says that the device is not accessible. Sometimes the IPv6 may interfere with the connection, and I suggest we disable that before anything else. On the fornt of the printer Panel, scroll down to and then select Wireless. In the wireless Menu, select Advanced settings, then IPv6 and.

  Now we are going to let the router and unplug the power cable (NOTE: do not reset the router), then do the same with the printer and shut down the computer. After a minute, plug in the router, wait to fully turn on, then plug the printer back in and wait for the wireless light become solid. Once the router and the printer are on, go ahead and re - turn on the computer. This will refresh the network connection.

  Please let me know if this solves the problem by marking your post as solved (click on Accept as Solution button below). If the problem persists, let me know, I'll watch for your reply.

  See you soon!

• 15 - r074TU: laptop does not connect to the router

  Day sum... .my laptop (model No. 15r074TU) with window 8.1 does not connect to the router that is D-link

  I uninstalled my driver reinstalled again, but it didn't work... even if I formatted my laptop, reconfigure the router and... done with all possible measures to overcome this problem, but have ultimately failed. Please suggest ways to tackle this problem as soon as possible...

  Follow the wizards in the following forum sticky and troubleshooting.

  http://h30434.www3.HP.com/T5/notebook-wireless-and-networking/common-fixes-for-wireless-connectivity-issues/m-p/4831601#M86871

• Re: Wireless not connect / search for router - Satellite P305

  Hey all, I hope that I can help.

  As I come back from uni, my laptop has decided that its wireless won't work. When I scan, it cannot find the router in my house and the icon in the taskbar has a cross inside. When I plug my laptop into the router via ethernet, it connects very well then and the wireless takes over even the router, but as soon as I unplug the wireless dies again.

  My laptop is a Toshiba P305 and has an Atheros AR9281 wireless card.
  My OS is Windows Vista Home Premium 32 bit SP1.

  I know that's not the router, since everything else connects fine - my PS3, this old PC XP (so I do this thread), etc.

  Sometimes when I start the laptop it finds my router (and a neighbor), but when I try to connect to it it says "Windows cannot connect to this network" and it simply disappears. Also sometimes I can connect to the router after that the Ethernet cable is disconnected, but it is limited to the connectivity (i.e. I can't get on the internet) and soon the tomb with the message "Windows has not received a response from the access point or router" and can not find yet

  What I've tried so far.

  -Restart.
  -Leave the portable island for awhile.
  -Switch wireless switch and turn it back on.
  -Check I have the latest drivers for the card.
  -Reinstall these drivers.
  -Check if the WLAN or other network services are disabled.
  -Restart some services.
  -Disabling and then re-enabling the adapter.
  -Physically sitting right next to the router and it still can't find it.
  -System restore
  -Disable the WEP encryption on my router and use another method of security, even turn off security completely.
  -Reboot the router.

  I have not had any problems with the wireless front, he has just started happening yesterday.

  Thanks for any help/advice, I'm out of ideas.

  Hello

  I see you didn't update the BIOS
  Well buddy, I think you should do this!
  Update the BIOS, and then try again

  If you notice more WLan connectivity issues then I would recommend changing the WiFi channel! This has been useful for me in the past!

  I know that you tried to update the driver WLan but check this Toshiba page for the latest version of the WLan driver!
  http://APS2.toshiba-tro.de/WLAN/

• laptop older does not connect to new router

  Hello

  I have a laptop Compaq Presario A940NR which is several years old.  Until last week, it was connected through a router.  The router has stopped working on all devices (printer, 2 other laptops).  Replaced with a Netgear N150 router. -connected to a desktop computer, wireless to the printer and 2 new laptops.  Most old laptop listed above does not connect to the network.  I tried (wired) connection directly to the ISP modem via ethernet.  He does not even recognize this connection.  I may need a driver updated, but unable to connect to the internet on the laptop.

  Help! and thank you,

  Hi, Darlene:

  Here are more recent (MARCH 2011) a version of the driver for your Atheros wireless card. I suggest you use it since you have a new router. There was a lot of connection problems with your Atheros card and new Linksys E series routers, for example.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=472276&swItem=ob-91782-1&mode=4&IDX=1

  Paul

• Laptop HP G70 connection to the router but not the internet

  I have a laptop HP G70 running windows 7, I got a new router installed. My computer to the router, but not to the internet links. I tried the software updates for my drivers running, doing all used to end router for example change etc channel/parameters/IP wifi. I tried to turn off the wireless, reset the router and re enabling it does not work.

  It will connect to the internet ethernet of nis.

  My laptop connects fine with other networks if it is not wireless.

  All other devices are connected to the router.

  Please help this is extremely frustrating.

  You are the very welcome.

  I compressed the file and downloaded on my Skydrive account, which I shared the link below.

  Download, unzip and run the file called sp54972.

  https://onedrive.live.com/redir?RESID=832F4957D2E51B93! 263 & authkey =! AEOhdjA3QVhETy0 & ithint = % 2czip

• Lexmark printer will not connect to the router

  Original title: HELP

  I switched to Fios and now have a new modem/router and I don't know how to get my Lexmark printer to recognize. How can I solve this problem?

  Hello

  Thanks for posting the question in the Microsoft Community!

  The Lexmark printer will not connect to the router/modem.

  Because the problem is with the Lexmark printer cannot connect to the router, I suggest contact you the Lexmark support team in order to get help with this question.

  You can try to get help on the site:

  http://support.Lexmark.com/index?page=productSelection&channel=supportAndDownloads&locale=en&UserLocale=en_US

  If you need any help or if you encounter problems with Windows in the future, let us know and we would be happy to help you.

• While trying to install a Linksys E1500 he repeats that my computer is not connected to the router.

  Computer problems and the router

  I have a windows xp 2002 with service Pack 3. While trying to install a Linksys E1500 he repeats that my computer is not connected to the router. Ive tried a new cable and it does not solve the problem. He also said that my computer does not have wireless capabilities. Any suggestions?

  You'll be much more likely to get useful (or even possible) suggestions if you provide the full text of the error messages you get, without paraphrasing.

  For example:

  He repeated to me that my computer is not connected to the router. --> What is the real error message?

  He also said that my computer lacks wireless capabilities--> what is the error message itself?

  You are "trying to connect via a cable" to the router or you're talking about your Internet service (for example, the router is connected to the Internet via a cable)?

  You think that your computer has "wireless capabilities?  Open the Device Manager (start > run > devmgmt.msc > OK), then click on the + sign next to "network adapters."  Please provide the names of any devices listed there.

  Is your computer without a name, a laptop?  There a name of brand anywhere (for example, Toshiba, HP, Dell, etc.)?

  Open System Properties (start > run > msinfo32 > OK)
  Click Edit > select all
  Click Edit > copy
  Right-click in your response here and select Paste
  Be sure to hide the "System name" or "User Name" if it makes you feel better, but please do not remove anything else.

• HP Photosmart 5520: HP Photosmart 5520 not shall be connected to the network or print.

  Our printer working fine until a couple of days. Now, when we print dialogue print open but constantly says "the printer is not connected. I tried to connect to the router using the screen of the printer, but get a message saying "cannot connect". I rebooted everything what it many times.

  At some point during those two days, I have managed to get so our imac had found the printer and actually thought it was printing, but nothing only happened at the end of the printer. Now I'm back to "the printer is not connected. I don't know what caused that change or change it back.

  Someone had mentioned to a static ip address in the printer, so I tried this (assuming I did it correctly) passing through the settings - without wire-advanced settings-ip settings-manual where it says ip address no connection, then put an address ip, but this was not accepted and always says 000.000.000.000.

  The Test report suggested allowing MAC wireless network could be the problem, but somehow, I spent (don't know how) and the latest report ' NECK until low but above indicates a problem IP address by saying that our ' HP printer is currently configured with an IP address of auto. On most of the networks that it will prevent your printer to communicate on the network... run the next solution." The solution suggested to restart then print a new test report and then says "check that the printer has received a DHCP IP from your network router address, check the configuration source in the current configuration of the report section - it should show DHCP. But after I restarted again the ip address shows 0.0.0.0 and the configuration source said no "specified." The test report gives no solution to change the ip address to view DHCP so I'm stuck. My Advanced settings still say IP settings - automatic. Help appreciated. Thank you. P.S I'm not good with all this talk about techy but I am surprised that, in my opinion, I understand what I wrote!

  I removed the ssid password and managed to print. I put the password, it is lacking in WPA WPA2 & (I have not WPA2-AES) and again the printer cannot connect. The printed report again now says FAIL to no filtering and implies that there is something to do with active mac filtering which I don't understand. Thanks for your help so far. We are called to take the kids to the movies can be on so not for awhile.