Satellite P300-135 hangs when it is in mode 'sleep'

Similar Questions

• No sound through HDMI - Satellite P300-135

  When I plug the HDMI cable from the laptop to my tv, I have no sound in the speakers on the TV, I only got sound in the laptop speakers. Could you help me solve this problem?
  Notepad is Satellite P300-135.

  You have enabled digital output (HDMI) in reading device? You can find it in the sound properties.

• WiFi with the Satellite P300-135 problem

  Hello

  Here's my problem:

  I removed VISTA and installed XP on my Satellite P300 - 135 (PSPC4E). After that, I downloaded all the drivers for XP and installed. But the wireless card is not recognised and in Device Manager there are two features of problem:
  -Device on high definition audio bus modem and
  -Network controller.

  I remember well the type of my wireless card and tried first with Realtek, but it did not work. Then I tried with Intel and Atheros drivers, but they do not have too much work.

  I hope someone can help me, because I don't want to go back to VISTA.

  Hello

  According to the specifications of the laptop Satellite P300-135 has Intel 11 a/b/g (13ch) - Golan WLAN card.
  Have you tried installing WXP driver for WIRELESS Intel network card?

• Satellite P300-275 - Crash when CPU at full load

  Hello everyone

  I have a Satellite P300 - 275 (PSPCCE) and a big problem after maintenance rear.

  When i games (average after 15 min Details CSS, ops black 15 min, 15 min bulletstorm...) and CPU it fully charged, my computer crash and I have to wait a few minutes before resuming.

  I'm doing some tests, but I don't know how it can solve the problem.

  -Test Prime95 (connected)
  Tested during a night and no problem, no crash
  http://ImageShack.us/photo/my-images/829/resultats.jpg/

  -Test OCCT (connected)
  Being tested for an hour, the temperature rose to 90 ° C but no problem, no crash

  -Test Memtest86 + (connected)
  I tested the two strips together and then each band separately and the pc crashed after 10 minutes (2x2gb DDR2-800)

  -Test FurManrk
  -He led for 15 min, 4 average fps on battery, no problem!
  -It ran for 30 seconds, 8 average FPS with battery and crash!
  -He ran for 30 min, 4 fps average, on battery, and then I plug the sector, crash after 30 seconds!

  Someone has an idea?

  THX

  Hmmm I have a few ideas.

  First of all, you should check if the laptop cooling modules are free of dust and debris.
  This prevents air circulation and cause of high temperature.
  In addition, make sure that there is enough free space around the laptop.

  Second idea; Use the Toshiba display driver. This driver supports protection of the GPU overheating. Use of that other drivers could lead to high temperature.

• Re: Satellite P300 - no sound when connecting computer laptop to TV via HDMI

  Hello

  I searched online on several sites and read the messages on this forum too but still could not find a solution that works.
  I plugged in the cable and instantly got video but no sound. This cable works fine with my PS3.

  I tried to set the audio device by default both HDMI and S/PDIF and reboot after each time, but it doesn't work!
  Also, when I choose HDMI as device and try clicking on the Test, I get an error message saying "cannot play the test tone".

  I checked for updates for the driver through Windows and it is said that there are no updates. I have a Satellite P300 laptop.

  Anyone have any ideas?

  Thank you
  Jen

  This means you have a perfect television image after activating the HDMI port but the problem is its only?

• Satellite A130/135 dies when the power adapter is connected

  Yesterday, my laptop satellite A130/135 completely dead in use.
  Even the lights indicating that the laptop is plugged into the custom of light.

  I read today that by removing the battery, hold the power button and place the battery back in place, I could get the laptop to turn it.
  It worked, but after that my battery is low I plugged my power adapter and the laptop is returned to its State does not.

  So now I have a limited amount of battery power and it does not load.
  Yes, what's wrong with my computer laptop/battery/adapter

  How can I solve this problem?

  Hello

  I found your other thread:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=143840

  It seems that the problem might be related to the hardware failure and all you can do is contact the ASP in your country.
  I put really know what might cause this problem but I think it could be something wrong with the motherboard

  To check the device by a technician of ASP.

• Satellite A300 - consumes a lot of battery in mode 'sleep'

  Hello
  I have a Satellite A300-1MP, brand new, with Vista 32.

  When I put it in mode 'sleep', she devours battery. Something like 10-20% of the overnight!
  Why is this happening? Is this normal? If not, how to fix? Is there something I can do or is there a problem with the laptop battery?

  My old laptop is a Satellite M70-340, and standby mode, it would lose less than 5% per day!

  I'd appreciate your help!
  Thank you!

  Hello

  You may need to disable certain options in the BIOS.
  I'm talking about Wake up LAN and similar options.

  I found this article from Toshiba:

  + Battery draining 15-20% when it is turned off during the night.
  http://APS2.toshiba-tro.de/KB0/TSB6B01N50013R01.htm

  Disabling Wake up option should help.

  Good bye

• Satellite A200 not power external USB devices in mode 'sleep'

  I have a new A200. I have and USB hub and disc external hard USB powered. When I put it in mode 'sleep' their lights stays on. It came with Vista. I searched for the setting, but I could not find. It is not good for the battery. Any advise?

  Thank you.

  -Sinan

  Hello

  The lights are also on when the laptop is to stay in sleep mode or hibernation mode.
  You cannot disable the led s

• All-in-one Officejet 4620 HP loses connection wireless network when it starts in mode 'sleep'

  My printer HP 4620 all-in-one wireless works fine until it enters mode "Eve".  Once it goes into sleep mode, it is not wake up if a print job is sent to it.  If I wake up it manually by pressing the power button flashing, she does still not print.  If I've completely put off and then on again, the print job that has been put on hold on my computer will start printing, but it's a huge pain and loss of time almost everytime I want to print.  I installed all available updates.  I also assigned a static IP address in an effort to correct this, but nothing helped.  I see that others have complained about this problem, but I see not that anyone has had success resolving this.  My operating system is Windows Vista.  I use a Sys-Link Wireless G Router.  Thank you.

  Ok.  My printer worked flawlessly for a few days, and I think I can declare the problem solved.  I think the problem started when I applied a HP recommended workaround for a different problem, that is, HPNetworkCommunicator.exe kept running and goes out 10-15 seconds, with the cursor displays activities whenever the program is running.  When I reversed this workaround solution, solve the problem wireless (but of course, I had once more the annoying problem with HPNetworkCommunicator.exe).  I then discovered that HP had published a software release that fixes the problem with HPNetworkCommunicator.exe.  I installed the new version of the software.  HPNetworkCommunicator.exe is now fixed, and my wireless connection remains stable even when the printer goes to sleep.

• Re: Satellite P300-135 - Gothic 3 problem "FN".

  The game is up to date, my drivers are up to date, but when all logo submissions that appear when entering a game are finished and menu screen appears, "Number lock" is automatically activated and cannot stop this function no matter what I do. The solution I came up with that was to remap the game for NumLock keyboard settings on.

  Can anyone give a solution to this problem, or there at - there a way to disable the keys "FN"?

  As far as I know Toshiba Flash cards can be disabled. You can do if you open the settings for Flash cards. You can find it under Start menu > all programs > Toshiba > utilities.

  Try it. Maybe using.

• Satellite P300-135 system issues using two HARD drives

  About a month ago I bought a faster hard drive for my laptop (because it wasn't hard drive 5400 RPM by default), and computer technicians to the store where I bought my laptop has recommended a Seagate Momentus 7200.4 250410.

  The first couple of days everything went smooth, but after that, every second, restart my OS (Windows 7 Ultimate 32 bit) reports of problems with my video card, sometimes 'Windows cannot initialize the device of this hardware driver. (Code 37) ", the other time"Windows has stopped this device because it has reported problems. " (Code 43) ", and when this error occurs, the keyboard and the keyboard do not work too.
  I made a simple and primitive diagnosis by deleting the second hard drive and rebooted 5 or 6 times, and everything went very well.

  So I think the problem is that the laptop has not enough power for two hard disks. Is it true, or is my phone begins to fail?

  Sorry for my mistakes of language, but English is my second language.

  Hello

  Usually the second HDD should not affect the performance of the system, but it of impossible
  So maybe you should test the specifications and performance of OS using another HARD drive maybe a HARD disk that takes in charge of 5400 RPM

• Satellite P300-1EI - hangs upward after Windows Update

  After update to Windows Installer the last update (27/12/08), Windows Vista always hangs up on the screen "Please wait" after the reboot.

  After the call to Toshiba support, I was told that it was advisable to do a full restore from the HARD drive and disable Windows Update.

  Y at - it a patch/update driver/firmware to fix this problem and be able to activate Windows Update?

  Hello!

  It s unclear not for me it's such a program or patch available for this program.

  What you can do is to start in safe mode and remove the update.
  If you have no success, I agree with the support from Toshiba. You must perform a HARD drive recovery. Press F8 at startup, choose 'Repair your computer' and follow the instructions in the menu

  Good bye

• Satellite A110 - 159 hangs when it is connected to the LAN card

  Hi, can anyone help?
  Can I find somewhere the LAN card firmware update? When I connect to my laptop with a built-in LAN card cable it breaks down, if it s connected the wireless, everything is ok, no crashes.

  It only happens once, after reboot ok, until the next stop and wake up. It s annoying.

  Have you tried to reinstall the card LAN and LAN driver?
  What operating system do you use?

• Re: Satellite P300-135: No. SPDIF in 'His' Panel after the installation of SP1

  Before this one had speakers, HDMI and SPDIF.
  Now - only speakers and HDMI.

  After all the works of S/PDIF through speakers device, but only in stereo mode.
  I need 5.1 DD!

  Could be another reason for that?

  Hello

  The SPDIF port is certainly available on this laptop.
  I remember that some devices can be hidden, if they are not enabled.

  So maybe you can do a right click in the Panel-> Sound and could mark called options hidden devices and features see the disabled.

  Then the SPDIF should reappear.

  Check it!

• Satellite P300-20-player not recognized in AHCI mode

  When I set the SATA to AHCI - Mode controller Mode. Doesn´t BIOS find the DVD more. I have also flashed the new Bios, but failure still exist.

  Can someone help me?

  Hi franckymaus,

  What model of laptop you have exactly?