Recovery of Switch 10 Acer and Windows 10 Upgrade

Similar Questions

• 10-FC06-0002 - HARD drive recovery disc error load XP and Windows 7 very well

  OK, so I have a Toshiba laptop I want to restore because I had used it for school and he had a lot of things about what I didn't need and turned slowly. Rather than take things one by one, I thought it would be better to start from scratch. I jumped in the recovery discs, I created, restarted the computer and booted from the DVD. I have chosen all the settings to restore the computer to out-of-the-box settings and a time window that says «copy files please wait...» "After that the screen disappeared after 10 minutes or so, another window flashes on the screen for a split second (has not yet the chance to see what it was) and then an error window pops up error 10-FC06-0002. The only thing I can do is shut down my computer, and it does not start after that. After trying several times, I decided to come here.

  I know what you say. "Before coming here, search or something, there are tons of problems like that here." Well, I'm looking, and all the results told me to "make a copy of your drive and see if it works, if not its your HARD drive ' tried to make an exact copy of the disk using a tool to copy DVD of Google, no dice. I tried copy the files from the disc on the desktop on disk, did not work. Copied files on an old thumb drive and booted from it. The same problem. Make one. ISO disk image and it has burned, triggered the error as well. No matter how I try to run the restore files, the same error message prevails. This would point to the hard drive being broken, correct? This is where I get lost, Windows XP installs flawlessly and works faster that any other computer I used it, as well as Windows 7 beta does.

  -------

  Does anyone know a fix to this error so I can restore my computer? Should I order new disks of recovery at Toshiba? How much do cost?

  -------

  I created these recovery disks about a week after the computer is turned on for the first time. The only software on the subject was the preloaded software, Mozilla Firefox, and MSN Messenger. These two programs would have caused corrupted recovery discs to bring?

  THANKS FOR ANY HELP IN ADVANCE! : D

  -----------

  EDIT: Should probably tell you some info on the laptop. It is a Toshiba A200 - AH6, try to restore Windows Vista recovery disks created in the Toshiba Recovery Manager.

  Hello!

  To me it sounds like it's your Toshiba Recovery disk is noisy or something else. It seems that the disc can't be read properly.
  I doubt that s a hardware issue because you tried a XP and Windows 7 disk successfully.
  But as Akuma says that this can happen also due a poor quality DVD media.

  In any case, I think you need to order a new drive Toshiba Recovery directly.

  Finally and above all the software that you have installed (Firefox and MSN) didn t cause corrupted recovery disk. Theoretically, you can install what you want before you create the recovery disk. The recovery disk creator burning a disc bootable with the files in the folder HDDrecovery on the second partition. All programs that you have installed must be installed after recovery again.

  Good bye

• YouTube videos are green for a few seconds when they start, quickly moving and switch between fullscreen and windowed mode

  suddenly, last night something happened with youtube. whenever I run a video on youtube its green for a few seconds, then it goes back to normal. its also green when I fast forward/jump and when I change between full screen and windowed. I linked to a screenshot of how it looks as if I googled this problem I find something else where people get a green screen but no picture at all and that it lasts the entire video.

  I tried updating the drivers for my graphics card. I tried to play on my nvidia card rather than use my intel graphics hd 4600 and still got the same result, but instead to get a green image, it was really dark almost black. I also tried to reinstall flash even downgrade to an earlier version, but nothing does. and the strange thing is that I only have this problem on youtube and only through firefox so I even tried reinstalling firefox, but that did not work either

  I found 2 things of this kind of help.
  the first solution is to disable hardware acceleration, but instead to get a green image for a few seconds, image frozen for the same period of time and then play and she is like when its Green, when I start it up, jump and change to full or windowed.

  the second solution I found in support for mozilla, to change the HTML5 player. But even if this player works great I really like it. for some reason any the break from the drive when I change between full screen and windowed mode and I don't like these pop-up windows get you that its now in full screen and I can press ESC to quit.

  These are just little things, but I would like to return the standard player.
  If anyone knows anything that could help me with this please let me know.

  This is the screenshot:
  http://i1285.Photobucket.com/albums/A584/JimZiii/1_zpsb3d41a08.PNG

  What a little wild speculation?

  YouTube uses a technology that has chopped videos in individual pieces, which is probably video serve more easily, but could create more opportunities for issues when moving in the video. There is an add-on called Center of YouTube that allows you to disable this technology and back to the days of one big file. Might be worth a try.

  • Preload YouTube videos while disabling playback Dash - Lifehacker
  • Center of YouTube - Add - ons for Firefox

• I'm sick and tired of Acer and Windows 8.1!

  Acer Aspire V5-571, win 8

  What started as a simple upgrade to 8.1 has become a nightmare of time wasted and frustrating. Acer support is useless, but perhaps the community can help. Or maybe Costco will read th of uselessness enclose and bring her back and stop selling Acer altogether. I used to be a big fan, but this experience has me mark completely off.

  I've updated FOUR other brands with no problems. I have the best part of spen t th two days with this Acer and nothing I tried works.

  After that I decided to go on the NOSE to see if UEFI was part of th eproblem, I changed the BIOS to the strives and now it does not start in the Menu of the BIOS (F2). NOTHING on the Acer website tells you how to solve this problem. Anyone heard of a BIOS that can not load without an operating system. The error is 'The operating system not found' and F2 does not work.

  Ideas anyone? Please not regurgitate "press F2 on the POST. It does not work - see above.

  its okay...

  BTW, try again the 2.17 sir...

  Unzip the exe file it y...

  After that...

  Locate the update.bat and then run...

• My office only displayed Widget Acer and Windows Live Messenger

  Original title: desktop display problem

  My desktop only Acer Widget & Windows Live Messenger, although my desktop folder contains everything that needs to be rendered outside the basket. There is no problem with the other user account on this computer. How can I fix this problem?

  You have already found the problem, perhaps unknowingly.

  quote... There is no problem with the other user account on this computer

  It is a strong indication that your user account is damaged.

  If it is an administrator account that you are having problems with, please set up another admin first.

  Make sure that the new admin account works smoothly without the display problem.

  Then decide if you keep some of the files for the damaged account.

  If you don't care to keep everything, then simply remove the damaged account.

  If you don't want certain files etc kept, then use this tutorial...

  http://Windows.Microsoft.com/en-CA/Windows-Vista/fix-a-corrupted-user-profile

  Note in the tutorial of... To copy files to the new user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you just created.

• Security internet and Windows 7 Upgrade

  As a HP 9180 recent buyer, I also bought the package of Norton Internet Security 2009 for three years. I'm more than a little twisted to discover that NIS 2009 may / may require an upgrade to protect my computer from viruses and malware. Why didn't HP mention this when the option for the security software was offered? Surely, if I had known that this possibility I wouldn't have spent extra for three years.

  Is there anything for HP to present their cusomers about their obsolete defacto possiibly commercialization of security software?

  Thank you.

  Curve

  There is a very simple answer to what you state.

  You access the symantec web site and that you have a current subscription, you are entitled to FREE upgrade to NIS 2010 that works on vista and windows 7.

  Just go here:-http://updatecenter.norton.com/

• External drives, USB, USB Flash Drives, "driver software device is not installed. Problem Acer and Windows 7

  Not sure one I'm more frustrated with.  Acer or Microsoft

  Try to get decent customer service out either seems so difficult.

  OK, it's a pretty common problem.  I've seen this around other forums and each finger to Microsoft points.

  Flash USB, Jump Drives thumb drives, Memory Sticks, players, whatever they are called, they do not work on my Acer laptop.  Everything works still perfectly on my Vista PC and my work XP.  So they are not damaged.  Also an external Freecom USB 1 TB drive.  Does not work on Windows 7.

  I have an Acer 5338 (less than one year) which unfortunately as as a manufacturer OEM for Microsoft Windows are not interested in help to say that there is problem Acer.  ACERS site does not even recognize the existence of the cell phone model I which makes contact them for a solution physically impossible (everyone has a phone number or e-mail address >).  In any case, they had a free upgrade to Win 7.  (Oh you can't imagine how much I care that I didn't...).

  So I've updated.  And all USB memory devices do not work all of a sudden.

  All of them try to load drivers then give up with the error message.

  Just to get the usual answers to the road!

  • I tested the USB ports.  All work.
  • I uninstalled all the USB ports and let the Win 7 to reinstall. No problem
  • I deleted the file that records discs.
  • I made a new clean install.  Nothing has changed.
  • Cannot switch the chipset drivers.  Won't let me, says I don't need them
  • Each drive is displayed during the startup screen.
  • Each drive appears in Device Manager but the poster as a fault.
  • Updated installed, removed, re-installed all the drivers on the planet.
  • Tried the solution of "regedit" suggested elsewhere, temptation of power my laptop, lucky I system restored to the top.
  • Does not appear in disk management, so cannot deal with any drive letter conflict.
  • Have no viruses.
  • Have one firewall installed.
  • Prayed
  • Touched the thing of reversal
  • Pleaded
  • Pretended to cry.  Not interested.

  So, I'm hoping against hope that someone has a solution to this problem.  I have a vague idea that it might be something to do with the "ports" and the port settings.  I'm afraid is a closed book to me, so please, geniuses everywhere, please help!  Give me something new to try!

  Or a way to talk to a human being at Acer!

  Hi davec07510,
   
  We use Windows 7 and have not encountered this problem on computers. This issue is occurring on your computer may be due to the driver or hardware that does not support Windows 7.
   
  The compatible chipset driver installation Windows 7 can help.
  Kind regards
  Syed - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• switching between mac and windows

  I installed 10 windows on my iMac 5 k and that you have configured boot at startup to load the mac OS, how to switch to windows

  Hi Handyman180

  Hold down the OPTION key during startup

• ProBook 650: Drive Partitions and Windows 10 upgrade

  Hello

  I'm here to find some information on Windows 10 because I want to upgrade my system, now it's Windows 7 Pro (64 bit). I downloaded the Windows ISO 10N Pro yet and before doing the upgrade, I'll create a complete backup of my drive using Macrium Reflect.

  I have now four partitions:

  1. Active NTFS, 500 MB system
  2. (: C) primary NTFS
  3. (: D) HP Recovery - NTFS primary
  4. (:) E HP Tools - primary NTFS

  In which partition Windows 10 installs?

  I have to choose, or it's an automatic installation?

  I should delete some of the partitions?

  W10 upgrade will remove one or more partitions?

  Thank you very much for your help!

  PS: how to check if the driver are compatible with W10?

  I upgraded to win10 of many PC Win7 - and everyone had some issues that needed to be overcome.

  Your plan to make an image with MR backup is the best approach, because, although Microsoft says that there is no risk in the upgrade of Win10, because they allow you to believe that you can always go back to your original OS and setup within 30 days, the ugly fact of the matter is that the Win10 GoBack feature turned out to be unreliable - and when it fails She can let the machines in a corrupt State - which is not always the case, it happens often enough to be a problem, but you will get no warning beforehand that he goes to the trash your PC!

  With regard to your questions:

  (1) installation partition: you already have 4 partitions at a higher level, so unless your drive is formatted in GPT (which is probably isn't), you WON'T get a meaningful choice about where to install Win10, because only the C: partition will be enough space.

  (2) deletion of partitions: while you can migrate HP tools stuff it into the C: partition and then delete HP_TOOLS, which really won't help much because this space is much too small to be useful.

  (3) with the recovery partition.  Don't count on that it works. The Win10 upgrade is known, in some cases, corrupt the partition of recovery that are stored by the OEM that built the original machine.  It's pretty much guarantee that no HP recovery will work. Thus, based on the recovery of Win7 partition back to Win7 is a mistake.

  Your backup of Mr. is safest and most reliable way to have a backup plan to return to Win7.  You do not mount the image to a restoration, instead, you start from media that you have created using MR, connect the external hard drive and then use the restore option to select the backup that you did.  So, be sure to exercise the option MR to create bootable media, you will need later to do a restore.

  Good luck
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  If my post helped you, please click on the Thumbs-Up symbol on my post to say thank you.
  If my posts resolved your issue please click "accept as a Solution.
  ========================================================================

• Recovery software gateway that prevents the Windows 7 upgrade.

  I ran Windows 7 compatibility test weeks before the original date of Windows 7. My compatibility was good and I was able to run Windows 7. I brought a copy of Windows 7 Ultimate genuwine for my PC company, ran the installation and rebuild everything that I even chose to wipe my system drive and let Windows 7 above. My installation was successful, until my reboot, my PC restarted and the PC I was going to run Windows 7 on a Gateway computer when it restarts my Gateway Recovery Center appears and the only thing I could do was a factory reset, my PC is back to its original Vista operating system. I thought it was an accident to my system, so I reinstalled Windows 7 and select upgrade from Vista to Windows 7 and the same thing happened, I got a friend to loan my installation disc and he worked on his PC, I return the installion disc back to store and said it was defective, but I think its my PC

  Is there anyone to disable the gateway recovery center because it seems whats stop my successful Windows 7 install. I tried calling gateway but they would talk to me about the service the customer my PC is almost 2 years old, but its update all software load them all and like I said Windows 7 compatibility says that my PC would go to Windows 7. Is this a way to cancel this the big loop hole

  My PC is a GT5625E Gateway 300 GB 4 GB RAM disk hard original system is Vista Home Premium.

  original title: Gateway Recovery Center returns PC to Vista OS after Windows 7 install, anyway to disable the gateway recovery center?

  Try the following:

  In search programs and files box is Windows 7 , type MSCONFIG and click the MSCONFIG icon that appears at the top of the Start Menu.
  In the System Configuration window, click the Startup tab.  Click once on your Windows entry (i.e. Windows C:\Windows) to highlight.
  then click set as default, then click apply. Carey Frisch

• I lost my x 86 programs after reinstall family vista premium and windows 7 Upgrade on another, both are hp pavilloin, is it possible to recover them.

  I have 2 HP pavillion desktop that I lost the x 86 full programs files systems, 1 is a vista I had to reinstall using a set of discs purchased from HP, the other flag I did an upgrade from vista to windows 7. Both are 32-bit operating systems. It's very strange that the x 86 systems wet program files missing. Can someone tell me why this happened and how to get the x 86 systems back. I did the repair restoration and even did a complete reinstall with a new hard drive on windows 7. All programs go into 1 file and will work properly from there.

  Thank you, pop

  You are welcome.

  I'm happy to have helped.

• Qosmio G40 and Windows 7 upgrade

  Hello

  Can someone tell me please on why Toshiba has no support for the Qosmio G40 when it comes to upgrading to windows 7?

  Are you sure about that?
  Have you already checked http://eu.computers.toshiba-europe.com/innovation/windows7_drivers.jsp?

• Switch between files and change the window using f8 - Dreamweaver CS 6

  In Dreamweaver CS 2, I could switch between files and windows edition with the f8 key. Dreamweaver CS 6, this doesn't seem to work. Is there a way I can put it so that I can switch between the 2 windows with a keyboard shortcut?

  Hello stilley,.

  I'm now working with DW CC, so I can only show you how to work with it, but I'm sure it's the same way:

  In my German DW:

  Bearbeiten > Tastaturbefehle > screenshot > files > Kurzbefehle +-taste press > change > Ok.

  Translated something like:

  Edition > keyboard shortcuts > screenshot

  

  > Files > shortcuts + - press > edit > Ok.

  Good luck!

  Hans-Günter

• Portege M800-10V - creator of recovery after Windows 7 upgrade

  Hello

  I have laptop M800-10V protected, which was under vista. I buy an upgrade to windows 7 for my m800.
  first: how to reinstall the toshiba recovery tool creator to save it?

  2nd: the toshiba recovery partition is stay hide, but I don't know how or where is luncher it this function?

  Thank you

  Hello

  The creator of recovery disk can only be used on the pre-installed operating system, in your case of Windows Vista. After upgrading to Windows 7, you can t more use it.

  With other words disk recovery contains only Vista and you can create a new one with Windows 7. After using the recovery disk, you also have the Windows 7 upgrade disk.

• DigitalPersona, fingerprint AuthenTec and Windows 7

  Disclaimer

  You use this guide at your own risk. I take no responsibility for any problem.

  Warning

  Before you do anything, please make sure that the fingerprint reader driver and software has been uninstalled.

  Check the link below to learn how to do it (this is not a standard uninstall process):

  How do I uninstall the driver and the AuthenTec fingerprint software

  Information

  • Please first check the FAQ before you want to post any question;
  • This guide is part of the " Windows 7 Upgrade Guide for dv6000/dv9000 models " and " Windows 7 Upgrade Guide for dv2000 models ", but this solution works on other portable HP also.

  Table of contents:

  To install the AuthenTec fingerprint driver and software DigitalPersona Personal

  B logon to Windows 7 using DigitalPersona Personal

  C update DigitalPersona Personal to the latest version

  To register a Web site on the DigitalPersona Personal software

  E manage registered accounts

  F FAQ

  To install the AuthenTec fingerprint driver and software DigitalPersona Personal

  Download driver fingerprint AuthenTec here (installator worm 8.5.4.46, driver, see 8.5.0.251).

  Extract it with WinRar.

  There are two folders:

  • x 86-containing the driver for 32-bit Windows 7;
  • x 64-containing the driver for Windows 7 64 bit.

  Install the driver appropriate for your system.

  Resources:

  How to determine if you have a 32-bit version or 64-bit Windows

  Then download and install DigitalPersona Personal worm 4.10.3790:

  • for 32-bit Windows 7 here.
  • for 64-bit Windows 7 from here.

  Restart the system.

  The fingerprint sensor should now be detected by the DigitalPersona Personal software.