Recovery on Windows 8.1 Manager

Similar Questions

• HP Touchsmart 15-g014dx: recovery of Windows 8.1 plant

  I'm doing a cover of the plant after a virus. I started to do a new Windows system image that does not. Trying to make a new image of disk also omitted. The main section of the hard drive is clean with still intact backup partition. Try to recover through the backup partition and the message that there is no boot device. When I try to use the backup disks (that I created) the first disc stops at 11 percent and said that the target drive is not connected. I ran the hard drive controller and the memory controller without error. Via external USB hard disk check displays the disk partitions to be healthy. All connections have been checked and the HDD to test again to verify there is not a problem with the hard drive with the result of anything being wrong with the hard drive.  Any help would be appreciated thanks...

  Update-double checked hard drive by using the depth check-no problems.  Use the command bootrec.exe/fixmbr and bootrec.exe/fixboot, both completed successfully. checked the hard drive again for a partition, that the only partition that existed was the backup partition. Tried to recreate the image using the recovery disk, said even the drive is not connected. Tried to restore using backup partition, also said no device available, giving start 3F0 error (without hard disk).

  Found solution... Recovery was made with Windows RE on USB 2.0 downloaded from Microsoft. Problem has been boot manager was not found. Windows RE recovered Manager startup and reloaded.  When the use of Windows RE select Windows Installer only. For once, Microsoft provided a real solution...

• HP Recovery Partition Windows 7

  Hello

  I have Hp Dv6 2177ca. It is installed with Windows 7, and recently he has been infected with a nonremoveable virus so I had to format the entire hard drive, including the recovery partition drive.

  I have the recovery disk HP where I installed my Windows7, but now there is NO "recovery Partition" (those who use F11).

  Please tell me how I can create this recovery partition?

  I tried to create it by using the recovery in Windows 7 Manager, as follows:

  Term, I typed 'recovery manager' and open the Recovery Manager.

  There is option 'System recovery' where he asked me if I wanted to create a "recovery Partition" and asked that I have inserted "Recovery Disk #1".» When I proceed on this issue, restart the computer and windows is loaded but no recovery partition is created.

  Please help me create a recovery partition.

  Thank you in advance.

  Hmmm... I seemed to work what to do:

  Previously on installation of recovery, I me performing the "System Recovery".

  But then I did the "Factory Reset" and it solved the problem and created the recovery Partition.

• I lost my recovery for Windows Vista disk. How can I restore the computer to its original factory State?

  I lost my recovery for windows Vista disk. How can I restore the computer to its original factory State? I can't find how to create recovery discs, I did not have this option in the Recovery Manager

  Hello

  Here are the different ways to reinstall vista

  Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a microsoft dvd vista

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  Save all data, because it will be lost, do the above

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Windows 7 disk management utility does not allow the creation of simple volume:

  Hello

  I used the Windows 7 disk management utility to reduce my about 450 GB C drive at about 210 GB. While I try to convert the volume unallocated resulting in a new simple volume, it fails with an error message indicating the space is insufficient on the disk (s) to complete the operation. The original disc was almost empty, while I performed the shrink operation. What is the problem here?

  Try one of the two utilities listed below. I think you will find they work better.

  Partition Wizard Home Edition:
  http://www.partitionwizard.com/free-partition-manager.html
  Note: There is also a CD bootable or versions of the bootable Flash drive:
  CD: http://www.partitionwizard.com/partition-wizard-bootable-cd.html
  Flash player: http://www.partitionwizard.com/bootable-flash-drive.html
  Among the features and functions: create partition, Delete partition, format partition,.
  A partition resize, move partitions, Partition recovery after an accidental deletion,
  Convert the partition, partition Explore, Hide partition,
  Change the drive letter, a partition active Set, Explorer (content display) of the partition.
  Note: To achieve any task using the "Operations pending" box at the bottom or top left.

  Alternative to Partition Wizard (a bit easier to use, but Partition Wizard and EASEUS have almost identical user interfaces)
  EASEUS Partition Master Home Edition (free):
  http://www.partition-tool.com/personal.htm
  Partition software ALL-IN-ONE and the most convenient hard disk partition manager Kit
  Includes Partition Manager, Disk & Partition copy Wizard and Partition MBR and GUID partition GPT disk recovery Wizard (table) on Windows 2000, XP, Vista, Windows 7 and Windows Server 2000/2003/2008 (32-bit and 64-bit).
  It allows users to resize/move Partition, drive system extend, copy Disk & Partition, Partition merge, Split Partition, redistribute free space, convert dynamic disk, Partition Recovery and much more.

  J W Stuart: http://www.pagestart.com

• No Apple USB driver in Windows 10 Device Manager

  Is there a way to retrieve the Apple USB driver in Windows 10 Device Manager.  I downloaded the iTunes 12.3.3 yesterday and now he is gone.

  I tried

  • plug into each of my Apple devices (iPod, iPad, iPhone, iPhone 4S 6)
  • restarting my computer
  • disabled my virus protection software
  • synchronization with different strings (some Apple, others not)
  • my devices restart and try again
  • Uninstalling iTunes and reinstalling
  • Uninstalling iTunes and goes back to and older version
  • make a Windows system to a restore point when I could synchronize my devices

  My main problem is that I need to sync my devices and iTunes does not detect them without the driver.  Windows can detect my devices and they appear in the file Explorer.  I am also able to get pictures and videos I've taken off the power unit and on my computer with no problems.

  Anything else I can try?  I'm out of ideas.  Thank you!

  This can help:

  If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

  Refer to the section:

  If you are using a Windows PC

  and read carefully.  Depending on your version of Windows the Apple Mobile device driver may appear in different places.

  Other than that, the General adzice is to demolish EVERYTING associated with iTunes and reinstall.  See excellent iTunes for Windows troubleshooting page located at turingtest2:

  Troubleshooting problems with iTunes for Windows updates

  especially the section:

  Remove and then reinstall iTunes and other software components

• Model number:-n010TX: recovery of windows media 8

  Mr President.

  I had my HP laptop pavilion in November 2013. It came with 8 pre-installed windows. I upgraded Windows 8.1 by March, 2014 and it worked fine for a few weeks, after which, the laptop has detected a hardware failure. I had a HP technician install a pirated windows 8 on my pc and it also gave me a series of DVDs of recovery for windows 8 to be used on a HP or compaq PC.

  It is a set of 3 DVDs 'system recovery' and 1 DVD "valorization of the pilot. The problem starts when I insert the first DVD of system recovery. He didn't autolay not. I checked with control panel and made sure that the "Use AutoPlay for all media and devices" option is checked. But autopsies shows two options: -.

  1 open the folder to view the files, and

  2. don't do anything.

  Now, on the DVD it says: "insert the disk and follow the instructions on the screen. But there is no on-screen instructions.

  I opened the folder and it contains a lot of files with names that I don't understand. Please let me know how I can get the DVD to play automatically.

  Thank you

  Hello

  If I understand correctly, you want to restore the recovery DVDs with you, if so, please go through the link for recovery from recovery disks (Windows 8) below.

  http://support.HP.com/us-en/document/c03489643

  I am an employee of HP, the views expressed here are my personal opinions, not HP.
  Make it easier for others to find solutions, marking my answer "Accept as Solution" if it solves your problem.
  Click the "Thumbs up" button to the left side of my post to say thank you! ***

• The new use of recovery of Windows XP with my q Satellite Pro P300-19?

  I just bought a Satellite Pro P300-19 q with Vista pre-installed. I want to use Windows XP Professional instead and understand that I must use the DVD titled "Product development - Microsoft Windows XP Professional" supplied with the machine. To do this, however, the provided information sheet is not very useful when he says only: «you will have to load this...» »

  My question is: How do I do it from running the disc in the DVD player, just reveals several files which none will get me nowhere?

  Any help would be welcome.

  The recovery of Windows XP product disc contains an image of a Windows XP installation ready with all the drivers and tools.

  Before installing Windows XP, you should burn the Vista recovery disk because if you want to restore Windows Vista you will need this disc. So, you can restore the computer back to wherever it was when you originally received.
  So far as the recovery image (Vista) is only stored on the HARD drive and so you can burn it to a DVD:
  Click on the Toshiba recovery disc creator and insert a blank DVD. Then follow the instructions on the screen. The recovery disk will be created.
  You are now able to boot from this DVD and install Vista with all the drivers and tools (factory settings).

  When you reinstall Windows with a recovery disk, the HARD disk will be reformatted and all data will be lost. This means that as other partitions so backup your data first.

  If you are using Vista it s also able to restore the factory since the HARD drive settings. Therefore, the files are stored in the folder HDDRecovery.
  So, if you want to put your mobile PC, press F8. Then you can see the menu and there advanced boot options, select repair your computer.
  Follow the instructions on the screen and the laptop will also reinstall.
  But don't forget, this (HARD disk recovery) feature is only available with Vista, not XP.

  So if you understand this and burned the Vista recovery disk, you can start to install Windows XP.
  Boot from the XP Recovery disk and follow the instructions on the screen. The installation of Windows XP does not have a lot of time and this procedure is similar to Vista. After installation you also have an installation with all drivers and Toshiba tools but with Windows XP of course.
  This is the content of the Windows XP Recovery disk.

• How to manage Windows Vista power management features

  Hi guys

  I searched a bit in the technical knowledge of the Toshiba and found a very interesting article on Windows Vista power management features.

  * [How to manage Windows Vista power management features | http://aps2.toshiba-tro.de/kb0/HTD84026Q0000R01.htm] *.

  The fact is that you will not find one tool of Toshiba Power Saver on Vista as on Windows XP laptops and the parameters energy saver is a bit hidden in Vista power saving settings.

  But you can also control some options as a method of cooling or power saving Mode.

  I think that it could be interesting for some people here in the forum!

  Greetings to all!

  Thanks JayJay.

• Not recognized USB-6251 (detected) to the MAX but is detected by the Windows 7 Device Manager

  Does anyone have a solution to our problem?

  USB-6251 is not recognized (detected) in MAX but is detected by the Windows 7 Device Manager.

  Is our configuration: Windows 7 (64-BIT), DAXmx 9.3.0f2, MAX 4,8 and USB-6251 (S/N 12B647A. P/N 194929 D - 04 L)

  We had a 'ready' indication/led the 6251.

  We tried several things... (all do not work)

  1. we have installed DAQmx 9.3 (for Windows 7)

  2. clean MAX Database by the following

  http://digital.NI.com/public.nsf/WebSearch/86256F0E001DA9FF86256FFD005B827C?OpenDocument

  Michael B.

  Yes the 6251 appears as a DAQ hardware.  Device charger OR placed in the auto-start services window.  We have refreshed MAX.

  Success!  I had to manually start the device loader.  Even if the service has been set to autostart, it did not work.  Right-click on the service shows that the beginning was selectable.  Click Start and the service began.  Start to MAX and can now see the device.  Open the front panel.

  How does the monitor devices OR running in the interface of the status bar to the device loader service?

  I don't understand why the service was not working.  Is it a security issue?  I am logged in as administrator.  I'll try once again as a normal user.

• 110-210 4c1508139t serial: recovery my windows 8.1

  110-210 product name

  Serial number (deleted content)

  ABA f3d15aa product number

  I try to recovery my windows 8.1 is posible I have not liked this windows 10 no funtion

  Internet Explorer

  flash drive

  and cong61ateun page

  I need my windows 8.1

  Hello

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Mini 110 Notebook and have to revert to Windows 8.1. Round trip is a feature that will restore your computer to the old operating system that was installed before you upgraded to Windows 10. Here is a link to show you how to proceed. Under the heading back to previous versions of Windows.

  I hope this helps.

  Thank you.

• MAX does not detect my instrument 488.2 GPIB-USB-HS, but Windows XP Device Manager only

  Hello

  I have a problem when you use the 488.2 GPIB-USB-HS, I see the device in Windows XP Device Manager, but it is not visible in the MAX, I do not see even a section for devices GPIB. However, when I try to install a new device, GPIB, the Wizard MAX tells me that it is one of the instruments GPIB installed on the computer which GPIB0 - USB-GPIB-HS. Do you know what is the reason to do this, because I want to use a multimeter in LabVIEW via GPIB, but I can't access it, I don't even see that there is a GPIB connection in the computer (in LabVIEW).

  Kind regards

  Alejandro Rodriguez

  It's the kind of old. Have you tried the last?

• After the removal of recovery of Windows Trojan, now unable to see the files on the Start Menu

  After hitting him with the recovery of windows Trojan (which I think I deleted) using Malwarebytes' Anti-Malware and advance care system. Then I tried the unhide files which some became visible. Now although when I go to the start menu and click on a folder that they are empty, but if I go into my computer the files are there in the files. any help from anyone who has had the same problem would very be appriceated

  Thank you

  Stuart Austin

  Hi StuartAustin,

  Method 1
  Troy was not completely removed from your computer, I suggest you to scan virus online at the following link

  http://www.Microsoft.com/security/scanner/

  Method 2
  I suggest to create a new user account and see if that helps, the following link you will help to create the new user account.

  Create a user account
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account
  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account
  http://support.Microsoft.com/kb/279783

  If everything works well in the new user account, I suggest you try the steps from the following link to transfer files and settings to the new user account.

  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
  http://support.Microsoft.com/kb/811151

• I want to download recovery cd windows Vista for Compaq CQ60-110EE

  I want to download recovery cd windows Vista for Compaq CQ60-110EE

  and I want to upgrade processor but idon't know this laptop supports processor? /

  [Personal information]

  Downloads are not available, recovery discs need to be ordered at HP, then they post them to you.

  Thanks for posting your complete product number, and I'll see which processors are supported on this model.

  http://h10025.www1.HP.com/ewfrf/wc/findModel?cc=us&DLC=en&LC=en

  #2

  Please do not post your s/n

  

• enable windows wireless connection manager

  I am installing a new wireless router, the installation disc tells me to activate windows wireless connection manager, how can I do this? Thnks

  Hello

  What is the brand and model of the computer?

  Follow these steps and check.

  a. click Start and then click Control Panel.

  b. click on network connections and Internet.

  c. click on network connections.

  d. right click on the wireless connection icon and choose Activate. (If already activated, proceed to the next step)

  e. right click on the wireless network connectionicon, and then click Properties.

  (f) at the top of the window, click the wireless networks tab.

  g. check Use Windows to configure my wireless network.