Error with MSXML 4.0 in Windows 7 (64-bit)

Similar Questions

• Error with a blue screen in windows 8 64-bit because of the file "cnnctfy3.sys".

  I m sending u link of this error minidump files since there were 5 error files I downloaded on OneDrive

  Link: https://onedrive.live.com/redir?resid=620CE0EA1DD716E9%21356

  CrashFileUpdate folder_name

  Please help me... my laptop running very low, because of this. and the start-up stop n is tedious because of this...

  Thanks and greetings

  Ravi Mehta

  HI Ravi,

  This problem can occur because the cnnctfy3.sys file on the computer.

  All files dump reports show:

  9F error checking, {4, 12 c, fffffa8004a5ab00, fffff880009c2810}

  WARNING: Unable to verify timestamp for cnnctfy3.sys

  ERROR: Module load completed but symbols can be loaded for cnnctfy3.sys

  Failed to retrieve the thread context, Win32 error 0n30

  WARNING: Unable to verify timestamp for win32k.sys

  ERROR: Module load completed but symbols can be loaded for win32k.sys

  Probably caused by: usbccgp.sys

  cnnctfy3.sys is the driver of Connectify light package Filter Kit. If you have installed the package, I suggest to uninstall and check if this solves the problem.

  Please keep us informed.

• Using Photoshop, I have come across a problem, when I launch Photoshop CC (2015), it instantly goes to a blue screen with the error of KERNEL_SECURITY_CHECK_FAILURE, my PC is Windows 10 (64-bit), so please it outside. Thank you

  Using Photoshop, I have come across a problem, when I launch Photoshop CC (2015), it instantly goes to a blue screen with the error of KERNEL_SECURITY_CHECK_FAILURE, my PC is Windows 10 (64-bit), so please it outside. Thank you

  Hi Sammo,

  See this thread: Re: photoshop, 'kernel security check failed'

  Kind regards

  Claes

• I have problems with Adobe Photoshop CS4 and Windows 7 32-bit Professiol.

  When I open an image of the bridge, the photoshop Panel is locked on one side of the screen.  The onle way I can get out of it is CTRL, alt, delete.  The problem persists.  I tried to uninstall Adobe and reinstall with no luck.  I called Adobe and they think that there is a problem with the security system in Windows.  Help, please.

  Hey jrcjr,

  This could be attributed to several factors such as conflicts between device drivers, applications, settings of operating system, hardware, and corrupt elements in specific files.

  Basic troubleshooting
  
  1. make sure that the computer meets the minimum requirements for Photoshop.
  2. install all Windows updates. .
  3 re-create the Photoshop preferences file.

  Re-create the Photoshop preferences file to eliminate problems that may cause a damaged Preferences file.

  To re-create the Photoshop preferences files:

  1. quit Photoshop.
  2. rename the \AppData\Roaming\Adobe\Adobe Photoshop CS4\Adobe Photoshop CS4 Settings\Adobe Photoshop CS4 Prefs.psp directory Users\ [username] Adobe Photoshop CS4 Prefs.old.
  3 launch Photoshop. Photoshop creates a new Adobe Photoshop CS4 Prefs.psp file.
  If the problem persists, the Photoshop preferences files aren't the cause. To restore custom settings, quit Photoshop, and then delete the new Adobe Photoshop CS4 Prefs.psp file and restore the original name of the previous Adobe Photoshop CS4 Prefs.psp file.
  
  4 restart Windows in a modified mode
  
  See this article for reference:
  
  Restart Windows in a modified mode (Windows 7 and Windows Vista)
  http://kb2.Adobe.com/CPS/404/kb404913.html

  5. create the new account administrator (Windows 7 and Vista)
  
  Refer to this article:
  
  Create a new local administrator account (Windows Vista)
  http://kb2.Adobe.com/CPS/404/kb404912.html

  If nothing helps, please contact the vendor of software for any help.

  For your reference:
  
  Fix system errors and freezes in Photoshop CS4 (Windows 7 and Vista)
  http://kb2.Adobe.com/CPS/404/kb404897.html

  Important note: This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• No sound with Qosmio G30 (PQG32E) on Windows 7 32 bit

  Hello

  I installed Windows 7 32 bit Ultimate Edition on Qosmio G30 HD-DVD (PQG32E) without any problems and all the drivers are installed but the sound does not work.

  Can you help me?

  Best regards

  Waiken

  Hello

  I'm happy to hear that you could solve your problem, mate! :)

  You re welcome

• I already worked with the macro recorder in Windows 95 (32 bit), now I want to do it on a 64 bit system.

  I already update the Win32Hlp but not the recorder.exe and recorder.dll because I have not found where to update. Is it posible to get a new program which look like?

  Hello

  In previous versions of Windows, you can save macros using the recorder for Windows macros, 32 - bit old. Now, you need a third-party utility.
  You can search for commercial 3rd online party by using your favorite search engine.

  PARTY SOFTWARE WARNING: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Diana
  Microsoft Answers Support Engineer

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• error with password reset Home premium Windows 7 Assistant

  Password reset Win 7 Home premium is me an error when you try to reset my password.

  See the guide to recovering lost password Windows 7 Home Premium account user, can't connect, connection problem

  Him begins the article with some basic steps you can take and then work upwards through more complicated methods where the easiest do not solve the problem. Please read the intro, but I think it will be the 8 method which solves your problem. Follow the precautionary measures later in the thread as well.

  You could be up & running again within an hour, probably less.

  If you have any questions, then post them in a new question of your choice [i.e. don't post in the thread linked as it is already very long]; I'll keep an eye on him.

• 'Incorrect function' error with my backup (I have Windows Vista)

  I have a problem filling my back up.  Even if it is scheduled every week the last completed upward was in 2008.  When I did this time it gave me the message:
  Incorrect function (0 x 80070001)

  What does that mean?
  Thank you!

  Hello
   
  1. you are using ' backup and restore the Center "or any other program to save the files?
  2. who is the edition of Windows Vista installed on the computer?
   
  This problem occurs when you click on a complete PC Backup in the backup Center dialog box and restore and then you click on create a backup now.
   
  To resolve this issue, follow these steps:
  1. start disk management. To do this, click Start, type diskmgmt.msc in the search box, and then click diskmgmt.msc in the list programs.
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  2 right-click the primary partition that you want to enable, and then click Mark Partition as Active.
  Exit disk management.
  3. restart the computer by using the Windows Vista DVD. Press any key to start the computer using DVD.
  4 set your preferred language and then click Next.
  Note: In most cases, the repair process starts automatically, and the System Recovery Options menu is not displayed.
  5. click on repair your computer.
  6. in the System Recovery Options dialog box, click the operating system you want to repair, and then click Next.
  7. in the System Recovery Options menu, click Startup Repair to start the repair process.
  8. when the repair process is complete, click Finish.
  9 restart the computer by using the hard disk.
  10. connect to the computer as an administrator and then try to perform the backup operation.
   
  For more information, see this link: http://support.microsoft.com/kb/950167
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error when you try to update Windows 7 64 bit - code error 0x8000FFFF

  Been upgraded Windows 7 very well since the purchase, but in the last few days I've met the above error code. I ran through most of the potential solutions (check the registry keys, checking the services running, disable AV software, rename the folder to download etc.), but nothing seems to help. Currently, I'm stuck with Windows 7 could not update from this point.

  HI -.

  Running "Run the Fix It" in aggressive mode seems to have done the trick. One thing to note - I also disabled Acronis True Image Backup Nonstop, who had run up to this point. If this makes a difference or not, I'm not sure. Whatever it is, the updates seem to work fine now.

  Thank you very much

  It's very interesting as the How to reset the Windows Update components? page specifically mentions that it is not expected for Windows 7 when I visit with my Windows 7 system:

  Advanced System

  This article applies to a different version of Windows than the one you are using. Content of this article is not relevant to you. Visit the Windows 7 Solution Center

  And, applies to , at the bottom of the page, do not include Windows 7.

  I have the feeling that the information on this page is incorrect according to the directives of Windows 7, which is not surprising.
  That said, it seems that Acronis was the culprit that caused the problem to update.

  A Acronis True Image Backup Nonstop running during the previous update was successful?
  MowGreen Services consumer safety update

• fatal error installation software photosmart c7250 on windows vista 32 bit

  Problem with uninstall and install the driver software print on my PC - printer is HP Photosmart while a C7250 - wireless network connection

  My printer worked for many years.  Then some of the features of the photo printing had stopped working - I think because there may have been a conflict with several on my PC HP printer drivers.  So I tried to uninstall all the HP software (via the uninstall of the window).  All successfully uninstalled except:

  C:\Program files/hp/digital imaging\esupport\hpzscr01.exe

  C:\Program files/hp/digital imaging\ocr\hpzscr01.exe

  C:\Pro...

  C:\pr...

  I could manually the files to uninstall the first 2 because I could see where they were.  But I have no idea about the other 2 given that the error did not display name as you can see.  I tried to install anyway (using the HP Solution to install errors - Windows Vista).  Followed all the instructions.  Installing the latest driver/software (downloaded from the HP site) obtained in what concerns my wireless printer detection; then it gets stuck at the stage of configuration at 96% for 15 minutes - DURATION situation 07417929 error code.  Help!  I think it is because I can not uninstall these ghosts files.  does anyone have advice?

  ---------------- More INFO ---------------------

  After the above, I am able to print in the way of basic - but my HP Solution Center software and not operational.  Message when I try to open Solution Center is "no devices found habe HP."

  I have a LOG file with some PRT screens that I wish I could join this note (can not know how to do).  It can give some more errors.

  I finally solved this problem.  The solution was to perform a full system restore on my PC - returned to the factory settings.  Do windows, software updates re - load manually (including the software of pinter), manually the saved copy of data.  It seemed to work.  So everything comes into conflict that was on my PC was a bit too complex to adhust without having to do this VERY long process.

• RegSvr32 error code appears when I start Windows 7, 64-bit version

  This is the second time that I posted the problem as he took the time to see where the error occurred.   After testing, it was found that the pop up error code would be almost every time that the computer had been turned off and restarted.

  Is the error code appeared: "RegSvr32.   Module: 'C:\Users\Jim\App.Data\Local\GjpgPack\instrument.dll' could not be loaded.   Make sure the binary is stored at the specified location, or debug it to check for problems with the binary or dependent file. Dll files.   The specified module could not be found. »

  I would like to know how to solve this problem and if this error code is an indication that my hard drive which is about to fail.   The computer was functioning normally.

  Appreciate any help you can give me.    Jim

  Is the error code appeared: "RegSvr32.   Module: 'C:\Users\Jim\App.Data\Local\GjpgPack\instrument.dll' could not be loaded.   Make sure the binary is stored at the specified location, or debug it to check for problems with the binary or dependent file. Dll files.   The specified module could not be found. »

  Use "Autoruns for Windows" and check if there is that a boot associated .dll u entry you have described and if so delete...
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  If you look at it, it should be under this yellow color

  Yellow color

  

  In case if you can't find using the above methods, it might be under

  taskschedule ===>Scheduler task library. If found delete the entry for the Task Scheduler Library .dll file

  

• HPPhotosmart d110 series fatal error when executing software driver under windows 7 64-bit.

  Unrecoverable error occurred when running a software driver for hpphotosmart D110 series on hp high desktop computer running the Windows operating system 7 (64)-related wireless all-in-one.  Message reported that imaging\bin\HPSLPSVC64 digital. DLL failed to register.  Uninstalled program and repeated attempts tent after the restart but resulted in the same message.  Downloaded a newer version of the driver for HP but resulted in the same error message.

  Printer and driver system also used on HP laptop with operating system vista with connection Wi - Fi.  It works very well.

  Hi rchirone,

  Try the procedure described in the following document.

  http://support.HP.com/us-en/document/c02266980

• What is the error code 57 for update of windows vista 32-bit

  Whenever I try to do this update, it fails and gives me code error 57. What I'm doing and what it means? It is also a critical update.

  Hello Vampist

  It seems that you have a patch that is corrupted and it keeps trying to update each time. I suggest that you can back UP all your data. Here are some things you can try CHECKDISK, SFC SCAN and ChEKSUR.

  HOW TO CHECK THE DISK:
  http://windowshelp.Microsoft.com/Windows/en-us/help/bc1393cf-9f9c-79C7-0f91-9337c2c41f811033.mspx

  SFC SCAN: http://support.microsoft.com/kb/947595

  CheckSur: http://support.microsoft.com/default.aspx/kb/947821

  Let us know how it works for you, Justin M. Microsoft Answers Support Engineer visit our Microsoft answers feedback Forumand let us know what you think.

• Get the F3-F200-002 error when you try to start Windows 7 64-bit edition

  I have a Toshiba Satellite computer laptop C855-S5214...   I had to restart the computer after an AVG update. It closed and restarted and got stuck on the windows icon (icon was always moving / floating, but it wouldn't keep loading)...  He did this thing even a week or two ago... We took out the battery and put it again and it booted up fine... this time... nothing...   (don't ask me why we pulled out the battery... we (that is her husband) did and told me eventually--)

  At first he would stop at the windows icon and just stay there forever...  Then, I did F8 and started in safe mode... which worked well...  I tried to do the repair, and it comes to say it could not be repaired and to close... then I tried the last known good configuration startup and that did nothing at all... literally... after a few readings on the internet, I decided to use my 5 recovery disks from Toshiba that I made when I came to the computer and try to reformat save my files... I went into Setup and said to boot from the CD/DVD-ROM, because I could not do that without forcing this way... he got through 3 disks and then the disk 4, I got the F3-F200-002 error and now I can't do ANYTHING without getting this error can not enter setup F2...  I get the error until it's here, so I can't recover even to change it to boot from a hard disk instead of the CD/DVD drive...  I can get to the F8 screen but what I chose, I get the error...  I even tried to put in disk 1, as it is supposed to be the 'solution' to this error, but that does not work either...

  Leslie

  Hello

  It is an error code very vague on what is best to fix it.

  And the closet I can find is 0002, no 002

  Solutions to be a module of bad memory, bad sectors on the hard drive, defective recovery disks or a faulty hard disk can designate.

  I suggest you read the information contained in these links:

  https://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=65437

  http://forums.techarena.in/operating-systems/1413251.htm

  http://forums.techarena.in/operating-systems/1381256.htm

  To reinstall from the Toshiba recovery partition, makes you the disks, you press the 0 (zero) to start, then follow the instructions for installation back to factory settings.

  See you soon.

• I have a black screen with cursor before logon for Windows 7, 32-bit. Help, please.

  Tried to start in safe mode & start the laptop very well, but once I went back to the startup by default, face the same problem again.

  Hello

  Take a look at this thread and follow the same steps listed in the breast.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/Windows-7-boots-to-black-screen-with-cursor-before/531df029-0dac-4392-9efe-1d35714cf136

  In particular, the bit on a SFC/scannow. Sometimes when you unplug a PC like that, you can damage some essential Windows files. A SFC scan should be able to fix it.

  This link contains a lot of other really good as well troubleshooting procedures.

  I hope this helps.