Pavilion p6 2408eb Desktop PC: cannot access the bios to boot from the disk

Similar Questions

• Error: Windows cannot access the disk.

  I burned a dvd backup of certain data (downloads, bookmarks, photos etc.) files using windows drag and drop in the dvd player.

  The burn has been successful I was able to use it immediately, however, on the second (and subsequent) attempts to access the files burnt a windows error appears indicating that windows cannot access the disk.

  Like all other discs are able to be accessible to all without problems, there is no problem with dvd players?

  Please let know us that it's the only backup I have these files.

  I burned a dvd backup of certain data (downloads, bookmarks, photos etc.) files using windows drag and drop in the dvd player.

  The burn has been successful I was able to use it immediately, however, on the second (and subsequent) attempts to access the files burnt a windows error appears indicating that windows cannot access the disk.

  Like all other discs are able to be accessible to all without problems, there is no problem with dvd players?

  Please let know us that it's the only backup I have these files.

  ========================
  If these files are very important... the
  software suite may be worth a try:

  IsoBuster
  http://www.IsoBuster.com/

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Cannot access the disk in the drive E:, please make sure that the drive is ready and the disk is not write protected.

  When I try to backup Quicken, I received the error: cannot access the disk in the drive E:, please make sure that the drive is ready and the disk is not write protected.  My last backup of Quicken was 16/07/2010.  I don't know why I can't back up now.  Is there a way to fix this?

  Why not save to a folder on your hard drive and burn them to a CD - R from there? I can't tell from the little you wrote if the problem is with Quicken (not work or you have incorrectly backup location) or with your CD - RW drive. How about more details to work with? This will give you an idea of what to write:

  The first Question of troubleshooting: If the problem is new, what has changed between the time things worked and the time they do not have?

  http://www.elephantboycomputers.com/page2.html#Tech_Support - See the article "how to write a Post.
  http://support.microsoft.com/default.aspx/kb/555375 - how to ask a Question

  MS - MVP - Elephant Boy computers - don't panic!

• Windows cannot access the disk

  whenever I tried to insert a dvd disc the message "windows cannot access the disk" is shown in this dvd, there's some data. Whenever I check the properties, the size is displayed.

  If the DVD does not work with other disks and other DVD works with current DVD player, then the problem is with the DVD itself.

• Pavilion G7: Desktop Applications cannot access the Internet but metro apps can

  I have a Windows 8.1. About 5 days ago from desktop applications (IE, Chrome, Google Drive Office) has ceased to be able to access the Internet at all.

  However, apps of metro (metro IE, Facebook, Mail, etc.) can still access the Internet.

  How could it happen? That the two environments use different settings? Is there a setting or registry entry that applies only to the desktop environment?

  Analyses of viruses and malicious software (Malwarebytes and Windows Defender respectively) were not able to do what anyone. But since they are two desktop applications they have not been able to update their files of signatures since this problem started.

  I found the answer on the Microsoft site on this topic.

  The answer is to reset Winsock using this command from an administrator command prompt: "netsh winsock reset" and then restart.

  I did and that fixes the problem immediately.

• Desktop HP cannot access the wireless router

  HP Phoenix
  Product name: h9 - 1195d

  It seems that he be blocked by the software of HP support.

  I am connected via wireless but just can't access the router.

  While a netbook of borrowing can access the router wireless without problem.

  can someone help...

  Great, thanks for posting!

  Let us know if you have other problems.

• I have 2 laptops and one desktop. Desktop & laptop are very good. 2nd laptop computer cannot access the internet. I get a message media disconnected. I tried everything please help. I use Windows XP

  I have 2 laptops and one desktop.  Desktop & laptop are very good. 2nd laptop computer cannot access the internet. I get a message media disconnected. I tried everything please help.  I use Windows XP

  Hi JessaRoy,

  · The computer connected to the network or are they computer autonomous?

  · What is the number and the model of the computer?

  · What is the service pack installed don the computer?

  · What is the full error message with the error code, that's all?

  · What are the steps you tried to solve the problem?

  Try the steps from the link below: to test TCP/IP connections by using the ping and the commands net view: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/sag_tcpip_pro_pingconnect.mspx?mfr=true

  With regard to:

  Samhrutha G S - Microsoft technical support.

• Unable to access the photo viewer; and also cannot access the desktop icons because they are changed to the photo viewer icon.

  Original title: I tried to apply the photo viewer to open a file and the photo viewer icon replaced each icon on my desktop. Now I can't open anything on my desktop. What is going on?

  The name is below the icon, but the correct icon has been replaced by windows Photo Viewer icon. When I click to open it, it says: windows Photo Viewer cannot open this photo because Photo Viewer does not support this file format, or you do not have the latest updates... I don't know what I did!

  Hi,

   

  Thanks for posting your question in the Microsoft Community.

  From your problem description, I understand that you are unable to access the photo viewer; and also cannot access the desktop icons because they are changed to the photo viewer icon. Please let me know if you do not experience this problem.

  I understand the inconvenience caused to you. I'll help you solve the problem!

   

  Before troubleshooting, I have little information on the issue.

  1. did you of recent changes to the computer before this problem?

  Try the methods suggested in the article below and check after each method:

  Method 1: Icons change incorrectly in Windows: http://support.microsoft.com/kb/2396571

  Registry warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the in the Microsoft Knowledge Base: 322756. How to back up and restore the registry in Windows: http://windows.microsoft.com/en-us/windows-vista/Back-up-the-registry

   

  Method 2: Run scan files system (CFS) auditor, to repair missing or corrupted system files.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7: http://support.microsoft.com/kb/929833

  If the problem persists, post your reply with the results and the questions asked above. We are happy to help you further in the advanced troubleshooting steps!

  It will be useful.

• cannot access the internet from the desktop

  I am able to access the internet through the application of start page, but cannot access the internet from the desktop page. The convenience store has not detected a problem. Does not work via Wifi or wired broadband direct.

  Hello

  Are you using the right Internet Explorer?

  There are two more separate... From the start screen and another completely different for the office.

• RootKit/Malware/Virus problem - windows cannot access the specified device file or the path, you don't have permissions

  Hello

  I have a problem with my computer it has been infected by a virus that is not visible in normal mode. It prevents running any application that would help in the detection and removal. I tried running mrt, mcaffe, trendmicro rootkit detector rootkit detector, spybotSD, analysis windows Defender online Windows live onecar. All these works for a minute and then shutsdown, when I click it again I get the error, as mentioned in the title, 'windows cannot access the specified device file or the path, you do not have permissions.

  This problem has a solution or re - install is the only way out?

  The pointers/help appreciated.

  Just to add, I am able to connect using my last known good configuration and only safe mode configurations.

  Thank you

  Id2View,

  1. follow all the instructions in this thread: How to get rid of malware

  2. If still no joy you can find Microsoft MVPs and other trained analysts on the following support sites:
  Aumha.org
  Atribune.org
  SpywareHammer
  BleepingComputer
  Safer-Networking

  3. If you need help with virus-related issues, contact the Support Services Microsoft product.

  To support the Canada and the United States, call toll-free (866) PCSAFETY (727-2338).

  For support outside the United States and the Canada, visit the page Web of Product Support Services.

  4. If you need more assistance for the position of the newsgroup Microsoft - security - virusvirus/worm.
  Through your News Reader:
  News://msnews.Microsoft.com/Microsoft.public.Security.virus
  Via the Web:
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Security.virus

  Hope this helps,

  Vincenzo Di Russo - Microsoft MVP Windows Internet Explorer, Windows Desktop Experience & security - since 2003. ~ ~ ~ My MVP profile: https://mvp.support.microsoft.com/profile/Vincenzo

• Windows automatically restarts constantly, cannot access the system restore point, cannot access the computer in safe mode

  Hi all

  For the not 24 hours I tried to access my computer in normal mode. When I turn on the pc, it says "configuration data 1 of 3 steps...". 0% complete"he never spent 0% and within seconds, it automatically restarts and starts again. It's so frustrating! I have a windows vista pc (purchased in ' 06). I can only access my desktop in SafeMode.

  I tried to perform a system restore, but not like he says "recovery disk is not the restore point selected. What should I do? I tried to manually create a restore point, but cannot access the system and Maintenance, while in safe mode. I can't do anything but literally access the internet. How can I get Windows back to factory settings it is with these limited resources? I have a Dell reinstallation DVD.

  I searched my programs and found that recently Windows automatically updated and downloaded "Microsoft Powerpoint Viewer" and "for 2007 Office system Compatibility Pack '. Now, I think it has something to do with it, because they were the most recent updates, before the pc crashed. But I also fear that it may be a virus, which has completely hijacked this PC. How am I supposed to get rid of a bug, if I can't even get the necessary antivirus?

  Sorry for the ranting, but it's so stressful when my pc is completely down. Please, please please help me. Thank you in advance for reading this same!

  Arianne

  Hello

  you talk about restore and system recovery disc in the same breath

  they are 2 different things

  and you can NOT create a restore of yesterday and today!

  yesterday is gone

  If it does not already; You can't do

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  The malware removal:

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Reinstall vista from Dell DVD

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

• When Installing Blackberry software error message Windows cannot access the specified device, path or file

  Try to install the software for my Blackberry on laptop, get the message Windows cannot access the specified device, file, or path may not be the appropriate permissions for access you element. What should I do please help...

  Re-download/save to your desktop > right click on its Setup.exeo run as admin.

  See you soon.

  Mick Murphy - Microsoft partner

• executable files: cannot access the file because it is being used by another process

  Hello
  I created a file named test.bat on my desk
  baptized "test.bat" and sent the notebook, wrote "REM" and recorded.
  so, I closed my notebook and reopened, has added another "REM" and saved the file again.
  then I tried to rename, move the file to another folder and delete
  everything went without any problems.

  But if I create the file and run it, the command prompt will appear for a while and then disappear.
  I can rename or move the file without any problem,
  But if I try to edit the file in Notepad, I get this error:

  The process cannot access the file because it is being used by another process.

  and the file is not saved.

  also, if I try to delete the file, it seems to be deleted until I press F5, the file appears again.
  When you try to rename/move this new file, I get another error:

  File Access Denied

  You need permission to perform this action

  You need the permission of the administrator of the computer to make changes
  in this file

  It seems the file is opened (or if I choose to delete) after a few minutes, then it is not if I try to access
  the file (I kept pressing F5 every few seconds for 15 minutes and the file is missing)

  the problem appears if occuar with any file name, anywhere, not just the office or home by car, not even on the same disk,
  while I had no problem when I started in an old installation of windows xp and repeat the same steps.

  I tried to use the sysinternals utility handle, that's what I have:

  After creating test.bat:
  C:\Users\User>handle test.bat

  Copyright (C) 1997-2013 Mark Russinovich
  Sysinternals - www.sysinternals.com

  No found the corresponding handle.

  After you run test.bat:

  C:\Users\User>handle test.bat

  Handle v3.51
  Copyright (C) 1997-2013 Mark Russinovich
  Sysinternals - www.sysinternals.com

  System pid: 4 type: file A18: C:\Users\User\Desktop\t
  EST.bat

  has obtained the result above after attempting to remove test.bat also.

  After the creation of othertest.bat:

  C:\Users\User>handle othertest.bat

  Copyright (C) 1997-2013 Mark Russinovich
  Sysinternals - www.sysinternals.com

  No found the corresponding handle.

  After execution of othertest.bat:

  C:\Users\User>handle othertest.bat

  Handle v3.51
  Copyright (C) 1997-2013 Mark Russinovich
  Sysinternals - www.sysinternals.com

  System pid: 4 type: BD0 file: C:\Users\User\Desktop\o
  thertest.bat

  After you rename the othertest.bat:

  C:\Users\User>handle othertest.bat

  Copyright (C) 1997-2013 Mark Russinovich
  Sysinternals - www.sysinternals.com

  No found the corresponding handle.

  C:\Users\User>handle renamedtest.bat

  Handle v3.51
  Copyright (C) 1997-2013 Mark Russinovich
  Sysinternals - www.sysinternals.com

  System pid: 4 type: BD0 file: C:\Users\User\Desktop\r
  enamedtest.bat

  the also occuars when I run any .exe file and delete it after its finished running, I deleted
  the handle.exe and the handle64.exe after the test above and at the same time returned when I updated their records.

  can someone help me?
  IAM using Windows 7 ultimate 64-bit.
  Thank you.

  I struggled with this VERY ENNUYANT thing for a long time on a Windows Server 2008 R2.

  Just found the answer:

  http://superuser.com/questions/260375/why-would-system-continue-locking-executable-file-handles-after-the-app-has-exit

  Activation of the service 'Application Experience' does the trick for me.

  If I got paid for every minute spent dealing with the mysteries of Microsoft... No, wait! Paid!

  Thank you Microsoft!

• I bought the creative cloud for students and cannot access the document cloud.

  Hello.  I bought the creative cloud for students and cannot access the document cloud.  I thought that it was part of the overall agreement, but it just says my trial has expired and does not allow me to do something.  My payments were made.  The only reason why I

  Your subscription to cloud shows correctly on your account page?

  If you have more than one email, you will be sure that you use the right Adobe ID?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  If Yes

  Some general information for a subscription of cloud

  Cloud programs don't use serial... numbers you, connect you to your cloud account paying to download & install & activate... you may need to sign out of the cloud and restart your computer and log into the cloud for things to work

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• Cannot access the server message coming up and cannot convert files

  Cannot access the server message coming up and can't convert the files. Works on my desktop, but not at home.

  ER

  Is it ExportPDF?