Recovery value discs

Similar Questions

• System was a dell, but everything has been changed. Should recovery/repair disc what I do?

  Original title: I need to run recovery on my xp

  I need to run a recovery/repair on my family computer for my windows xp cd, but all I can find is a for a dell xp home recovery disk. My computer was originally from dell, but we changed rooms (motherboard, CPU, ram, video card, etc.) and told me that now I can't launch an inside dell recovery disk. Is this correct? If so should what type of recovery/repair disc I do?

  That is right. The Dell recovery disk will work only on the original Dell equipment.  You will need to purchase a retail license, either a generic OEM license without brand that has never been used.

• How to format a Dell Backup and Recovery DVD disc copy?

  In 2013, when I bought my Dell Inspiron 15R is 7520, it was preinstalled with the Windows 8.0 operating system. Using the Dell B & R software right now, I created 8.0 Windows system image in different regions in 3 DVDs.

  Since then I have had then improved to 8.0 Windows 8.1 and year last at 10.

  To avoid the loss of data in case of failure of equipment/system, I created the image of the system of Windows 10 in an external hard drive (WD Passport 1 TB).

  But other readings suggested that I also need to create a bootable in case system repair disc if Windows refused to load. That's why I wanted to format the disks from windows 8.0 image I created in the year 2013. However, the disks are write protected and I can't format it.

  Can someone tell me how to format disks that are protected from writing software Dell B & R?

  Thank you.

  If the media is DVD-R or + r, it is write - once.  You will need new discs to make a new recovery boot disc.

  If it's on DVD - RW or + RW, you can format the disks using Windows or another utility (Cyberlink, Nero, etc) and re-use the disks.

• Recovery value creation after replacing hard drive

  I am running Windows 7 on a laptop Pavilion. I have a recovery of the value that I created a few years before on the DVD-r. In the meantime, I had my hard drive (and then my processor) replaced under warranty. Do I need to recreate a set of recovery, or the existing set will work?

  Hello

  As long as the motherboard has not changed, your existing recovery disc set should work fine.

  Kind regards

  DP - K

• Created recovery 2 discs but for the installation of the OS is used only

  I went to a friends this afternoon and he made the recovery discs and everything went well, 2 discs were made.
  Now, he has just phoned to say he used the discs on his laptop computer, but only one was used then why do 2, is it necessary to n2.
  Ken

  Hi Ken

  And what phone your friend?
  Did he get a choice at first start to decide between 32 and 64-bit operating system installation?

• Satellite L555-10N: toshiba recovery not disc creator no work Win7 x 64

  Hello

  creator of recovery disk Toshiba cannot be installed. need it please help. Thank you

  http://img517.imageshack.us/img517/5869/unbenannt1ja.jpg

  Does anyone has the left one to the current version?

  Laptop: Toshiba Satellite L555-10N
  Win7 x 64

  Hello

  Seems that the Toshiba recovery disc creator cannot find image files to create the recovery disk.

  Have you changed anything on the HARD drive?

  The image files are necessary and important in order to create the recovery disk

  Welcome them

• Re: Satellite L300 - made recovery but disc does not work

  I have a Satellite L300 and did a few sets of recovery discs from what I read some brands work and some don't, and none have so far.

  Insert Diskette 1, press the button and hold F12 key until the startup option appears.
  Select CD/DVD and then back type box appears with X:\windows\system32\cmd.exe - startnet.cmd
  and in the box waiting for ODD vacancies...

  You can add several points after that as nothing is more - so three sets of recovery disks on three different brands of DVD any advice would be pleaseing!

  Brian

  Hello

  According to your description, the system restore procedure does not start, and the STRANGE can not read the disc.

  In your case I would recommend recover laptop using Toshiba HDD recovery.
  You can start the procedure of HARD drive; Press F8, choose repair my computer, Toshiba HDD recovery.
  Now the system restore should products

  After the laptop has been set to factory settings, check to see if there is an update of firmware for this CURIOUS (CD/DVD drive). If yes-> update the firmware.
  I know you tried three different brands of DVD but you should always try to create a recovery disk using another DVD disc I m using TDK DVD-R and had good experience with it. One of my friends uses Verbatim DVD-R and never had problems

• Satellite L300-13 s - USB recovery instead of recovery DVD discs?

  Hello

  Well, for the first time in 8 years I had to do a system recovery using the disks that I created when I bought my l300-13s using the Toshiba Recovery Disk Creator.
  I had inadvertently deleted the HARD drive recovery partition when I decided to make a clone with a larger HARD drive.

  What I want to know is instead of making recovery discs DVD can only do a USB key recovery?

  Thank you

  Peter.

  When you open Toshiba Recovery Media Creator you can see media options that can be created. I m not 100% sure, but I think that the old L300 there was possibility of recovery DVD only so I think that you cannot create USB recovery.

• Satellite L655-16F - Factory reset using Recovery Media discs

  OK so I'll try to reset my Toshiba Satellite L655-16th back to factory settings, then he started giving me the out of memory error message, but I don't have that drives it asked me to do when I got the laptop, so when I do the F8 all start up and go to the screen with the Toshiba HDD recovery resetting thing and click on it It gives me this error message:

  * HDDRecoGUI *.
  Operating system recovery is impossible!
  Not found the HDD Recovery folder on the second disc of the first hard drive.
  There is no valid disk HARD recovery environment on this computer.

  I tried various different things; Press 0 - which gave me a screen asking you what operating system, I wanted to use (there is only Windows 7) then just continued to load as usual. Put the first disc in and restart my laptop (which I have pretty well every time anyway) - which did nothing. etc.
  So yes, is there a way to create the file from HARD drive of mystery I need the disks, or maybe another way to use the disks that I have not already tried?

  > Not found HDD Recovery folder on the second disc of the first hard drive.
  > There is no valid disk HARD recovery environment on this computer.
  This message appears if you have deleted the recovery image or changed the structure of the partitions on the HARD disk.

  If you have created disk or recovery disk that you can install the recovery using the recovery DVD image.

  Start your laptop and meadows F12 repeatedly to enter the boot menu.
  Place the recovery disc into the optical disc drive.
  In the menu choose the CD/DVD drive.
  Press ENTER.
  Follow the menu on the screen.

• Recovery creator disc error code: 1100 8-48-00000002. Satellite Pro L300-15

  Hi all.

  Satellite Pro L300-152 of the Vista 32 SP2.

  This laptop was gave me to try to repair (another instance of stolen suicide Vista).
  After retrieving the system (no re - install wasn't necessary), I would like to create a disc of recovery for the owner.

  However, when I try to run the "Toshiba Recovery Disk Creator", I get an 'Error' window with the following message is displayed "an unexpected error has occurred. Exit this application and start it again. (Error code: 1100 00000002-48-8). Of course restarting the application generates another identical message.
  No one knows what could be the cause of this error and how do I create a recovery for this notebook drive.

  Take care of all.

  Mike

  Hello

  This error message usually appears because the non compatible CD or DVD.
  I think you should first check if there is an ODD firmware update.
  On the Toshiba European page driver you might find updates firmware for different CD/DVD drives.

  You should check your CD/DVD drive and a compatible firmware is available, then you need to update this
  If there is no update firmware, then you must try different discs from different manufacturers to create a recovery disk.

• creating recovery OS disc will erase the other data on external hard drive?

  -seagate external hard drive to create the operating system recovery disc.

  n ' has no partition, thought it would appear on disc ext with the rest of the files and data (like the time machine)

  -cannot access now, is no longer in the finder or on the desktop, in disk utility.

  -is deleted the previous data?

  Thank you

  clueless

  Open the finder preferences and if you have selected "external drives".

  

  Ciao.

• Inefficient recovery Vista disc after installing XP.

  I formatted my laptop and installed linux openSUSE... I decided that I didn't really like that release, so I tried to reinstall Vista using my recovery disk, and it would not install.  However, I was able to install XP from another disc to start (strangely from another computer), but I still want my Vista because it is more compatible with my pc.

  Anyone know how to recover my Vista?  The computer does not work from the disk.

  If your recovery disc Vista/s do not work, you will need to contact the manufacturer of your computer.

  This isn't their recovery process, Microsoft.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• Help me install Recovery vista disc Xp Media Center manufactured PC

  Hello

  My pc came with windows xp media center edition. According to hp, I had to have the free vista upgrade if I had bought my pc until March 15, 2007.

  But I bought on 19 April 2007, so that they do not give me Windows Vista. I've been running on XP thereafter. Now I can borrow the friend Vista recovery disc and and install, but I don't know how to do this. If I need to change some settings in BIOS or not?

  I want my PC should work as if it came with vista only (d: recovery, Casked etc.)

  If in the case where I feel happy with vista, I also want to go back to XP MCE.

  Please help me to do the process.

  My model No. is the m7581in flag.

  You need not update BIOS to install Vista. If you do not experience problems addressed by the update, you don't need it.

  Before installing Vista, take your recovery disk set, so you can go back to XP if necessary. An another suggestion_Windows 7 must be released in a few months. I've been running the BETA-test version of this since Jan and now the recently published CR. It has some improvements on Vista. I would wait a few months for Windows 7.

  Create a set of recovery disks:

  http://support.HP.com/us-en/document/bph08097

• Are recovery Dell discs - REALLY available?

  I have a XPS computer, Windows 10 8900, it received last week. If your Dell printer is under warranty (mine is, dating a week), you can order Dell disks backup and restore here. You enter your Service tag and click on continue. When I do this, I get this message: "sorry, we seem to have a problem with one of our services (ASQ), please wait a few minutes and try again. Well, I tried for a few DAYS (in and out) and still get this message. Yes, I know that I can create the disks (or a USB stick recovery) and I'm going, but I also want to get drives from Dell. Could someone order these discs?

  Finally got the recovery of 'media' today. I thought it would be disks (the page to make the request indicates "Backup CD"), but they sent me a 8 GB USB key:

  

  I'm so happy. Only took me a few weeks of the nagging to get...

• NO RECOVERY NO DISC NO RECOVERY PARTITION

  Hello Sir, I acciedently deleted the recovery partition and I have not yet created the recovery disk...
  and when I try to create a drive its saying this restore partition is deleted...
  Please help me what can I do...
  Is it possible to go back on my partition. ????

  model.
  HP pavilian g6 1200tx
  India

  

  CHEK here,

  http://m.TechRadar.com/news/software/operating-systems/how-to-create-a-Windows-7-system-repair-disc-1067851

  Copy the link in your browser