"Recreate a link to the files automatically" does not

Similar Questions

• To work with the text to the assignment by the cursor of the large fragment of page it is necessary to change all the time down, 'against the judgment", but the page automatically does not start to rise upward, as happens in other browsers. I ask you for

  After the transition to Windows 7, there was a problem with Firefox. To work with the text to the award by the cursor of the large fragment of page it is necessary to change all the time down, 'against the judgment", but the page automatically does not ascend to the top as it was earlier, and like that occurs in other browsers. It is necessary to press the other key "down" which is him very troublesome. Resettlement on an earlier version (8.0) earlier irreproachably working, gave nothing. I ask you to help

  You must activate the module bar (Firefox > Options or view > toolbars;) CTRL + /) or find bar to make Firefox scroll the page while selecting the text (Ctrl + F).

• Error: "the file is maybe damaged. the file header does not match the checksum calculated"during the installation of Windows 7/8

  * Original title: Question of re-Installation of operating system.

  I got the message during win 7 / Win 8 installation.

  "the file is maybe damaged. the file header does not match the checksum calculated.

  My config - processor Intel C2D, 2 GB of RAM, Intel motherboard, 500 GB HARD drive

  I have also replace Win 7 DVD and DVD player also replaced.

  I also reinstall my single RAM chip so many times. but the problem still exists.

  During Win XP SP 3 installation, no such message type not displayed. I can install it easily.

  Pls help me Sir, I would like to Win7 in my computer again.

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description of the problem, it seems that you are facing the question with the reinstallation of Windows 7 on your computer.

  Because the computer does not recognize the CD - R into the DVD player probably boot order is set to hard drive first. I suggest to change the DVD boot priority in the BIOS and then try to perform the Startup Repair.

  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  In order to make changes in the BIOS, I suggest you to contact the manufacturer of the computer.

  Method 1:

  Unplug all external devices connected to the computer with the exception of the keyboard and mouse and check if the problem persists.

  M odes 2:

  If the problem persists try the Startup Repair. It is one of the recovery tools in the System Recovery Options menu. This set of tools is on your computer's hard disk and on the Windows installation disc. To learn more about Startup Repair , you can refer to the below mentioned article:

  http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions

  Method 3:

  In addition, if startup repair is not enough, you can perform a system restore, check if it helps you to solve the problem. For reference, you can see the article mentioned below.

  What are the system recovery options in Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Note: when you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• I have 9, 1 pages in PDF files that are accessible and the need to combine them into 1 PDF file.  I tried adding, adding and the combine process of PDF files. The file created does not take my changes. The file created is partially accessible, but I have

  I have 9, 1 pages in PDF files that are accessible and the need to combine them into 1 PDF file.  I tried adding, adding and the combine process of PDF files. The file created does not take my changes. The file created is partially accessible, but I have to re - the problems that I had fixed in the unique files. I need suggestions on what else can be done, if any. Using Acrobat pro XI.

  By habit, I tend to combine PDF files in the Page pane by right-clicking thumbnails then 'Insert of Pages'-> 'From File'. For me, this preserves the tags of these two documents, although the tags may have to be moved to the correct location (if I remember correctly the tags for inserted pages are put at the end of the tag structure, regardless of where the pages are inserted), if I put the tags in the document to insert into a container as a Section tag It makes the process easier. Travel set of tags in the right place is the only re-fixing that I remember having to do. What behavior you encounter?

  a 'C' student

• I hosted my server windows with dad go but the file server does not

  I greeted WindowsServer 2008 in go daddy with cisco firewall .i have set up active directory and server files but when I try to map the file server in my clients over the internet, it does not work

  his problems with the firewall they had put in place for me

• "pointing to the file" tool does not work

  I use Dreamweaver CS4 on a Mac under OS X 10.5.6. The tool 'to the file' (the icon that looks like a target in the properties panel) does not work. When I click on & made slide on it nothing happens. Any ideas on how I can get it to work?

  dmmontana wrote:

  I use Dreamweaver CS4 on a Mac under OS X 10.5.6. The tool 'to the file' (the icon that looks like a target in the properties panel) does not work.

  There is a known issue point to the file on Mac if you use a big screen (I think only 20 ' or more) or on a Setup dual monitor. It works very well on smaller screens.

• The file reference does not call. upload()

  OK it's going to take a little bit to explain but stick with me:
  
  I have two layers in the timeline, with no keyframes (coucheUn) and the other with a picture any key for every frame in the layer (layerB).
  In coucheUn, I have the script action to declare a variable of FileReference and I also declare and attach a listener object to the file reference.
  The listener object detects the event .onSelect to the FileRefernce (this event is generated when the service. the FileReference class's browse() is called - which opens a file browser and allows you to select a file). When called onSelect listener object executes the function. upload() FileReference which analyzes the file selected to a php script that downloads the file on my server.
  Function. for the FileReference browse() is called from an image in layerB. This is where the weird stuff that happens.
  When I test the movie the first time I enter the keyframe that calls the function. browse() all download routine work and the file is downloaded successfully. If I continue to the next keyframe (using navigation controls) and then navigate back and try to repeat the download process, then the file browser opens successfully, I select the file and then nothing happens. I have problems to identify the problem, for as far as I see it is as if it does never emit the onSelect event once the file is selected, which shouldn't be the case that the function .Browse works and a file is selected successfully. This would imply the php script does not work which is just ridiculous because it is a very simple script and it works the first time.
  Everyone has ideas, if you need more just information!
  
  
  UPDATE:
  
  Just did some tests and I'm completely confused, it's something the onSelect event. For some reason, it is not called / is not detected by the listener object. It's just weird because he calls good the first time you enter the frame, but if you navigate back, it is not detected. I checked the listener object was still in the scope of this framework and it seems to be, so I'm completely confused. The listener object is there and listening, the event that generated the onSelect event is executed but then never detected.

  Wooops, corrected just, said an another FileReference var on the following image with the same name, changed the name and works very well. Really really stupid of me.

• .bat file changed in an .exe file that opens a file linked to the main program does not open after packed

  Here's what's happening.

  I have an add on package I wanted to pack with a main program.  The problem is that the add-on is not an .exe file so I had to make a .bat file to open it, which, unfortunately, is not recognized as a user entry point.   So I converted the file .bat to .exe file so that I could create a user to this file entry point.

  It is a situation similar to opening a word document and it will automatically open Microsoft word.  Only in my case I create a batch file for this word document and then convert it into a .exe file so I could create a user for this document entry point.

  So in my case after it's all packed to the top and I run the user entry point, I get an error could not open file.  Is that what I would call a linked file?  I'm packing up under copy writing/isolation mode and not in merged mode.

  Any ideas?

  Hi Christopher2222,

  In most cases, you won't need to run the application during the capture process. In some scenarios it will probably a solution to set some values "first round" for an application.

  In this case, you try to start a batch (bat) file. All Thinstall/ThinApp scenarios with a bat file to add this to your package.ini

  giveitaname.exe

  Source=%SystemSystem%\cmd.exe

  Shortcut = YourPackageContainer.dat

  CommandLine=%SystemSystem%\cmd.exe/k C:\PathToYourBatchFile\start.bat OptionalParameter1 OptionalParameter2

  The UNC path is not recommended.

  Best regards

  Christian Janssen

  CIS - Group.nl - VMware and Thinstall partner

• Link on the Web page does not work in published HTML project

  I use 8.01 Captivate and created a project with a link to a URL of page web (I did by the insertion of the text links).  It works perfectly when I publish as an executable.

  Customer has requested that we publish now in the form of HTML/SWF file.  The link URL (set to open in a new window) does not this version.

  I changed the link at a click box with the action to open the web page in a new window.  Again, it works when you publish an executable file, but not when I publish to HTML.

  The OUTPUT of course links also do not work in the HTML version.

  We use IE11 to launch the HTML file.

  Any help will be greatly appreciated!

  Thank you!

  Hi Betty,.

  It seems to be a problem with the Flash security settings.

  Please follow the steps (these steps are for Firefox and IE) below:

  1. Publish the project to a folder on the c drive.
  2. Open the html of the published output.
  3. Do the right click on the screen and go to global settings.
  4. Go to the advance tab.
  5. Scroll down and click on trusted location settings.
  6. Click Add > add folder and navigate to your published folder and add it. (You can also add full lecteurC so that you don't have to do it again for all projects)
  7. Click on confirm and then close it.
  8. Now, re - open the html file and try to view attachments.

  These parameters are only made when you view the content locally. If you place the output on any server, then you must not make these settings.

  Hope it works... !

  Kind regards

  MILIN

• Link from flash file/move does not not on a page

  I'll apologize first for what might be a very basic questions. I was sent a SWF to add to a web page. I had the film to work on some pages where I inserted in a model and the model to update these pages. I think that had to insert it in another page and the movie does not work there. That this has something to do with the script in the scripts folder? A conflict any?
  
  Also, I need link the file, a URL, and put brackets around it < a href > does not work. The link to the page should embedded in the swf file?
  
  Thanks for any help on this.
  URL to see the pages
  Film works, but no link: http://www.grantwrangler.com/advertise.html
  Film even not appear: http://www.grantwrangler.com/index.html

  All Flash links must be mounted in the actionscript of Flash, so your question
  and his response is inconsequential, really not? You cannot bind a flash
  html file.

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.dreamweavermx-templates.com - template Triage!
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
  ==================

  "zagods" wrote in message
  News:f7lsmd$BB8$1@forums. Macromedia.com...
  > Do you want the entire Flash file to link to a URL or a link (or button)
  > in the Flash file to post a link somewhere?

• topic: Home link on the Web page does not work

  I have inserted a link on my Web page to about: home of the user to the homepage of firefox to take
  It looks like this:
  < a href = "subject: House" > < /a > Firefox
  It seems to work fine on the desktop browser, but it does not work on Firefox Android on the Samsung Galaxy Note GT-N8010 using the android 4.1.2 version and Firefox Android version 33.0.
  The link does not work, however, is recognized as a link, since the long press on the link gives options for opening/copying the link, but if I then select "Open in new tab", it still doesn't open it.
  Is this normal or if the link works?
  Thanks to anyone who can answer this,
  Cath

  It will not work. It's intentional.

• Sites of bookmark in the file that does not appear in the window

  I need to put several websites in a folder, I named "Accessories". He is not one of the four files in the drop down window. So, I have to save it in one of the four and then open that folder and move the site to the "Accessories" folder

  Is it possible to change the four sites in the window (two of them that I haven't used in years)? Then go straight to this folder?

  The seal shows what is happening.

  What I want to do is to click "bookmark this page" and be able to put it directly in a folder.

  I want to change the four folders listed in the drop-down list.

  What I do is put a bookmark in the 'Western Short Story' folder, and then open up the bookmark in the "Accessories" folder that does not appear in the box.

  It's not a huge deal, but I'm working on about 20 sites today and I would like to save a few steps.

• Satellite L30 PSL33E: Link to the energy saver does not work

  Problem: someone can help me find, this driver download

  Power Saver link does not work when I want to download the driver (WIN XP).

  http://support.toshiba-tro.de/tools/satellite/SL30/XP/TPS/pwrsav-psl30e-XP-70307q-en.zip

  Hmm, are you 100% sure?  :|

  I checked the link and it works for sure!
  Check again

• Satellite L30 PSL33: Link to the display driver does not work

  I'm trying to download displey drivers but the link does not work

  Satellite L30 PSL33
  http://ru.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=ru

  I use dial-up/modem

  > I'm using modem dial-up /: D
  Maybe it's too slow s

  I checked the Power Saver link and this tool can be downloaded.
  Therefore recommend that you check it again!

• Look for the files option does not

  Control Panel > Folder Options > general tab - I have the options "Open each folder in its own window" and "Use Windows classic folders" selected. Each folder it does not open its own window.

  Any idea or patch available?

  Here are the instructions on how to open the files in their own http://www.vistax64.com/tutorials/91587-open-folder-same-separate-new-window.htmlWindows.  Don't forget to read all this because there are steps that are required in more just by clicking on the boxes for the process to work (and he explains these).

  I hope this helps.

  Good luck! Lorien - a - MCSE/MCSA/network + / A +.