Red Ring of death

Similar Questions

• Red screen of death

  iPad Mini 4

  
  

  Last night I plugged it in to charge and this morning the screen was frozen showing the Apple logo. I did a hard reset and thought that this would solve the problem. Unfortunately, shortly after the Apple logo, I got a red screen. The iPad is in an infinite loop and does not boot.

  I tried to restore the iPad via iTunes, but it didn't work. I entered DFU mode and tried not to restore once again, no luck at all.

  My last resort is the Apple Support. I'll take it to an Apple authorized service center and hope for the best.

  What frustrates me is that I have this iPad for 2 months and it was purchased new in an Apple Store. I'm really angry...

  

  AlemaoSlv

  I understand your frustration, however electronic devices can fail for various reasons. The unit is still under warranty, Apple should take care of your problem.

  This is a user to user support forum. If you wish you share your frustration with Apple, then use their comments here, http://www.apple.com/feedback page and click the box in the matter.

• How can I connect my ipod classic to my new computer?  It has never hung to it before and the battery is in the red zone.  death as a stiff

  I don't know much about the ipod and the computer, but that computer I use is not yet my ipod classic hanging on to her.  and my ipod battery is dead.  I mean DEAD.  Please tell me how to do for my computer it read so I can still enjoy my ipod.  I would really appreciate it

  Connect it using the cable supplied with it... I don't understand what the problem is. Of course, it will take some charges before being recognized by the PC...

• I don't know my hotmail password. How can I recover it?

  HOTMAIL ACCOUNT

  I need help getting back to my old hotmail account I used for 1 and a half years now. It is connected to my account xbox live and I recently acquired the Red rings of death on it. I got a new xbox, but unfortunately he asks me my password. I only made the account of my xbox Live account and I have not used since. I can't do the recovery process because it makes 1 1/2 years. PLEASE, I BEG YOU! You can activate and I hope give me my password for my hotmail account.
  Im trying to get back on my old account, * address email is removed from the privacy *

  Hello

  Answers is a peer group supported and unfortunately has no real influence on Hotmail.

  HotMail has its own Forums, so you can ask your questions there.

  Windows Live Solution Center - HotMail - HotMail Forums Solutions
  http://windowslivehelp.com/

  Hotmail - Forums
  http://windowslivehelp.com/forums.aspx?ProductID=1

  Hotmail - Solutions
  http://windowslivehelp.com/solutions.aspx?ProductID=1

  How to contact Windows Live Hotmail Support
  http://email.about.com/od/hotmailtips/Qt/et_hotmail_supp.htm

  Windows Live Hotmail Top issues and Support information
  http://support.Microsoft.com/kb/316659/en-us

  Error message "your account has been locked" when trying to connect
  http://windowslivehelp.com/thread.aspx?ThreadId=77be7d82-a0e9-49c7-b46d-040ec654a9e2

  Compromised account - access unauthorized account - how to recover your account
  http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41

  Hotmail hacked? Take these steps
  http://blogs.msdn.com/b/securitytipstalk/archive/2010/07/07/Hotmail-hacked-take-these-steps.aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• RROD

  Why my x box 360 pro model have the Red Ring of death? It has not overheated and the food is very good.

  You need to contact Xbox support for assistance at http://support.xbox.com/en-us/Pages/default.aspx

• 320N crashes when you try to transfer data via wifi

  I have the 320N and I am very frusterated.  I would just take it, but I bought it new on Amazon.com, which means I have to pay shipping because I threw away the box and the return shipping of RMA form!  I don't even know if Amazon bring it back without this paperwork, but still the question...

  I have not yet all maps N, but I upgraded to this router because my home internet service is faster than what my old WRT - 54 g could deliver.  This new router performs routing and I can now achieve the nominal speed from my ISP (50 / 10 Mbit/s).

  Can I transfer large files 6 + GB WIRED between one of the LAN ports on this device.  However if I try to transfer more data on wifi, the router simply will stop.  The lights on the front work well, they Flash as there is activity and power light is solid, but it will not pass traffic and SSID wifi disappears.  I run a continuous ping to the router (192.168.1.1, ping - t) and I get<1ms replies.=""  on="" my="" laptop="" i="" initiate="" a="" download="" of="" a="" 1gb="" file="" which="" is="" shared="" in="" my="" windows="" 7="" homegroup.=""  within="" a="" minute="" or="" two="" the="" constant="" ping="" to="" the="" router="" starts="" timing="" out.=""  internet="" access="" to="" anything="" (wired="" or="" wireless)="" instantly="" ceases.=""  new="" introduced="" devices="" will="" not="" grab="" a="" dhcp="" address.=""  existing="" pc's="" whom="" already="" have="" their="" dhcp="" address="" can="" talk="" to="" each="" other="" only="" if="" wired.=""  the="" wireless="" transmitter="" stops="" broadcasting="" the="" network="" and="" devices="" no="" longer="" see="" it="" on="" the="" airwaves.=""  the="" only="" way="" to="" fix="" it="" is="" to="" power="" cycle="">

  It doesn't even have to be a large file via wifi to transfer.  Earlier as I type this post that I noticed the constant ping my other monitor started timing.  I have pedaled power the router in time for me to run for this position.  In fact I had to do it three times in the time it took me to write this post.  It's the most frustrating experience I had with a wifi router/ap, and I play with Cisco equipment at work running IOS real.

  Here's what I've tried so far.

  Reset the default settings by pressing the rear reset for more than 30 seconds button.

  I can confirm this resets the default values as password and all the other settings are default return.

  I tried WPA2 Personal.  I tried WPA.  Router blocks always.

  I tried with all the default settings.  Router blocks always.

  I have reset the router repeatedly.  Always freezes.

  Power cycle it for more than a minute.  Always freezes.

  It with the latest Linksys firmware reflash.  Always freezes.

  What should I do next?  I have a feeling that it is the same problem as in a lot of the advice of HP printer firmware.  This problem is bad solder on BGA CPU connection.  The difficulty that you put the formatter Board in an oven at 400 degrees for 5 to 8 minutes.  After this time let you cool at room temperature.  The oven heats the bad welds enough so that it assigns and gets a better connection.  There are hundreds of messages of success on that.  I also hear that the solder connection problem exists for many of the older game consoles review Xbox 360 causing the infamous "Red Ring of Death".

  So should I try to fight with Amazon for it back and eat the shipping costs?

  Can I cancel my warranty, open the unit and put it in the oven?

  I buy another router from a store, but then put it in the box and take it back?

  I just cut my losses?

  I just use this as a wired router (turn off Wifi) and plug in my WRT - 54 g and the brand that act as an access point?

  Thanks for the tips.

  Well, since it's only a week, Amazon sent me a new.  I just ship this one back in the box they send.  As long as they get it in 30 days I will not be charged.

  This one is def. a dud.  Hope that the next one works much better.  The first thing I do with there is a 1 GB transfer file and see if it freezes.

• Red box in Firefox

  Apex 3.2
  
  I have a workspace has assigned 2 diagrams.
  In IE everything works fine.
  In Firefox, if I go to the object browser, I can see everyting correctly except
  Packages
  Procedures
  Functions.
  When I click on one of them, I see the red box of death.
  
  Any suggestions appreciated
  
  Gus

  I had this problem when I used to use Apex 3.2. It's a compatibility issue with apex and firefox... Try using Internet Explorer or upgrade your environment if possible apex.

  I'm under 4.1.1 apex and it's fine with the latest version of firefox :)

• IPod classic 160.  At his mechanics/ROAR.

  I tried to reset several times to nothing does not.  Now has a red ringed X and the web address of the screen support.  Is it done?  What is the next step?

  The hard disk is likely to toast. The options are to repair or replace. There are third parties that the iPods of services, or you can try it yourself. See this recent post by Kenichi Watanabe - Re: iTunes save my iPod Classic 160 Gb -which gives a link to a possible replacement of DIY drive.

  TT2

• Dropped my iphone 6 in water, just the apple logo appears

  I dropped my iphone in the water two days back... I tried to turn off immediately, things would turn itself after a few seconds... I let it run out of battery, and finally he was out... I let it dry... Tried to remove the water forms all grooves... It's been 2 days now... I plugged it to load but it is now stuck on the apple logo. Nothing happens... For awhile, there was a red screen of death (I looked at the name) but now it's just the apple logo. This means - my phone is dead and needs a replacement? Any idea what I should do next?

  Shri.Chavda wrote:

  This means - my phone is dead and needs a replacement? Any idea what I should do next?

  That's right - you need to bring it to an Apple store or Service Center for repair for a replacement (the cost depends on what type of insurance you have and where you are - I mean what country) allowed

• Satellite A210 - 11 p PSAELE - display driver has encountered a problem

  Hey guys.

  I've updated my display driver at the latest.

  My laptop is the series of psaele A210 - 11 p with the graphics card from ATI 2600HD. Some time ago I got a red screen of death.
  When I rebooted my computer laptop, everything looked different, the Office seemed a bit simpler (color wise etc.; the detail who was in the bar start...)

  In any case, after that, I get rates to around 5-10 on really keen (Microsoft Flight Simulator 2004) when I use it to get above 25 frames per second.

  I'm now using Windows 7 from the original Vista preinstalled. When im in the gameplay, color blocks begin to appear on the screen, scattered on the ground and 3d objects. After about 30 seconds in the gameplay, the desktop freezes and then everything goes black. When my image back upwards again, a message pops up saying that the display driver has met with a problem, or something in that sense.

  So I took it for repair, but the guy said that he saw nothing wrong with the graphics card.
  I also have a laptop cooler but I have to admit, in gameplay it gets HOT.
  I have
  tried to use the robot to pilot of the program to check for outdated drivers, that I might have.
  After updating all the drivers the problem continues to exist.

  Can anyone help?
  Thank you.

  Hello

  In my opinion, the graphics card overheating while game.

  This could be possible if you want to use the non-Toshiba graphics card driver!
  3rd party pages don t graphics card drivers support GPU overheating protection and this could affect the GPU feature!

  I think it's problems because you also mentioned that this laptop gets hot while running a game.

  What to say; back to Toshiba graphics card driver and check if cooling operation modules correctly remove the dust and debris of grilles and fans to ensure better cooling performance.

  Good luck

• netflicks app not working not

  netflicks worked after the original Apple tv but all configuration recently, when I click on netflicks, it shows only a black screen.

  I see the same thing on one of my two Apple TV 4th generation. If I 'force quite' Netflix, it goes to the top with a red ring briefly and then goes black.

• z570 stops during boot

  Hello

  I have an IdeaPad z570 which stops unexpectedly.

  If I remove the battery and leave it overnight, then it will run for a shortwhile before turning off. Once he spent the best I get when you press the power button is a short burst when the power light comes on and sometimes the fan manages to go before the system turns off again.

  Anyone any idea what could be the cause. I suspect maybe equipment, capacitors duff as in the ring of death Xbox, but not sure what to try next.

  Thanks for looking

  David

  
  

• where can I get parts for my xbox 360 arcade

  I have the original arcade xbox 360 (contains no internal hard drive) I need spare parts. motors, fans, heat sinks, etc that I can't seem to be able to find a Red rings box that I can use for cooling parts. can someone give me a hand. some info on how to get a f box * cheap or free would be cool but any info would be nice. Thank you

  PS: anyone know what microsoft did with the boxes Red rings that are sent their?

  Hello

  The Microsoft Community (formerly answers) has no influence on the XBox or XBox Live
  If you need to contact them.

  XBox - Support
  http://support.Xbox.com/en-us/pages/default.aspx

  XBox - Contact us (support)
  http://support.Xbox.com/en-us/contact-us

  XBox - Support Forums - and my XBox (top-right)
  http://forums.Xbox.com/

  Xbox technical support phone number

  • Toll-free: (800) 4MY-XBOX or (800) 469-9269

  Opening hours: 600 PM 2200 h / Pacific / daily

  International (direct line in the U.S.): 425-635-7180

  XBox LIVE - Service status
  http://support.Xbox.com/en-us/Xbox-Live-status

  Manage the XBox Live account
  http://support.Xbox.com/en-us/billing-and-subscriptions/account-management/Xbox-Live-account-management

  XBox Live Sign-in problems
  http://support.Xbox.com/en-us/billing-and-subscriptions/Windows-Live-ID/Xbox-Live-sign-in

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• R51 display no light

  For several weeks now, I noticed that the display of my R51 needed seconds to get to a bright light normally. When I've recovered from the hibernation mode it started very dark with a Red Tan and seemed to need about 10 to 15 seconds warm up and shine as it should. Three days ago it suddenly started flashing, then worked with stable again, but not as bright light and with a tanned reddish area. After a new commissioning the next day, he worked well once again, but after a few hours it was dark. Looking closely at it that I could see that the Office was there, but the light of the background screen is apparently off.

  I managed to get an external display to display the same image that the display of ThinkPad. On this, the desktop appears correctly. It must display the ThinkPad which is on the Fritz. It looks like a hardware failure.

  Does someone can give me a hint component that causes this error?

  Is the inverter LCD TVT, or the screen or what?

  Please help quickly, I need my R51 outside the home.

  Butcher

  Welcome to the forum!

  The backlight (CCFL) on your LCD badly shot, dyed red is donate death for that matter, since NOTHING else it triggers.

  Although the bulb is replaceable, it's a pain to a job and you are much better to swap the LCD screen or a whole cover.

  Good luck.

• Broken the EF 50 mm f/1.2 L

  I took my 50mm F/1.2 of my purse tonight and noticed that he would not focus properly. So I messed up with the auto focus switch and looked at the lens.  That's when I noticed that the lens hood and the filter have been mobile - actually drag in and out in unison, but only on one side of the lens. I removed the lens hood and it seems that the distal housing compared to the red ring has broken unilaterally but remains attached on the opposite side.

  So now the question... Is the garbage of the lens or can it be fixed? If it can be fixed, then how much will it cost?

  cjflet0,

  Your EF 50 mm f/1.2 L USM lens will need to be repaired by our authorized Service centre.  To start the repair process, you need to fill out a service request on our Web site.

  We are unable to provide estimates on their behalf.  If you send the lens to them, they will provide you with a free quote.  At this point, you can choose to accept the quote and go ahead with the repairs or you can refuse the estimates and the lens will be returned to you.

  If it is a time sensitive matter, additional support options are available to contact us.