(Redirected) Cannot get the compatibility to windows 10 update

Similar Questions

• Newly installed hard drive, cannot get the reinstallation of Windows 7 to the end

  Hi all. My factory-issued Seagate 1 TB hard drive of origin provided with my PC Pavilion Elite HPE-240f failed a few months ago and I finally had time to fixation (rock a Pavilion dm4 laptop in the meantime, I'm not in a huge rush). I replaced it tonight with a Western Digital Blue 1 TB hard drive, which I know is Advanced Format.

  I love HP platform minor changes in the the Windows 7 OS, I went ahead and tried to reinstall the OS of my recovery disks that I made when I got this PC. I checked the BIOS settings and the new hard drive WD IS recognized, the size is correct, etc. It has been configured in RAID with the SATA controller, and I tried to put out when the installation of the operating system initially lacked AHCI. It seems to be stuck in some kind of loop in the final configuration step, and I get out of the dialog box "Installation of Windows set up Windows to run on a hardware on this computer" could not. Hit Okay sends in reboot and after that I get a "Windows is unable to complete the installation. To install Windows on this computer, restart the installation"notice.

  It makes me batty, and I really want my back office. This is a great machine, and as much as I love my laptop, it can't handle heavy programs like Photoshop or my multitasking fool. I managed to get the OS installed by forcing the system to bypass its system predefined through registry commands, but the important things were wrong, as Windows Update does not work, so I'll try to reset all with only recovery disks. So far, no go. I am extremely tired, frustrated, and it's late, so apologies for what I've left out or of typos. Any help on how to solve this problem is GREATLY appreciated.

  Thank you very much for your response, @MechPilot. I actually found what I thought, it's perhaps the question a day or two before your answer: my computer was manufactured and purchased just before October 2010, which has been cut for restoration placed disks shaped for the drives non - Advanced Format. All the following which has been reformatted accordingly. I contacted HP and bought the replacement of the recovery discs (made in 2012), that I received yesterday. After several hours of nerves and finger-crossing, it worked like a charm. The operating system has successfully recovered, and I couldn't be happier!

  I answer computer said of office right now, in fact! Thanks again.

• Blue Screen BAD_POOL_CALLER cannot start the laptop after Windows XP updates

  My user has a Dell Latitude E6500 and after installing Windows Update, the laptop does not start in Windows XP.  Tried to repair, reinstall all Modes and each option we just get error BAD_POOL_CALLER not boot into the operating system.

  Reference Dell it's a software problem, probably caused by the update as no other changes have been made to the laptop.  Before we pay for Dell support software means someone has suggestions?  All options on Googling guess you can enter Windows in at least secure Mode that we can not so I'm stuck!

  See you soon

  See this article for some real good troubleshooting Info:

  0X000000C2: BAD_POOL_CALLER
  http://aumha.org/a/stop.htm

  Also:

  How can I solve this? (bad_pool_caller)?
  http://www.Tek-Tips.com/viewthread.cfm?QID=423270

• When you try a yahoo search I get the error message "windows cannot find (web site name) make sure you typed the name correctly.

  Original title: error message

  When you try a yahoo search I get the error message "windows cannot find (web site name) make sure you typed the name correctly.

  Hello

  ·         What web browser do you use?

  ·         Would which site you find?

  ·         The issue is that with Yahoo search?

  ·         Exactly how you try to search? Web site or toolbar in Internet explorer?

  You try to use the Bing search engine to search for Web pages online. To access Bing search engine type www.bing.com in the address bar. Please provide us with more information about the issue to help you further.

• cannot get the keyboard to select windows xp when I have only four seconds to select is stuck on windows xp professional and cannot get the keyboard to use arrows to select

  cannot get the keyboard works when reebooting said cd I need driver sata when reebooting he gives four seconds to schrol up to windows xp but the line is highlighted on a windows xp profesional bellows and can't seem to choose windows xp on its own keyboard wont respond but lights from F1 or f2 f3 until f12 choose please help

  A few old machines will not recognize a USB keyboard/mouse until after Windows starts.  Look at the back of your computer and see if you have a PS/2 (round) connector for a keyboard and a mouse.  If you do, then you will need to use a keyboard with a round PS/2 connector or a USB-to-PS/2 adapter and plug the PS/2 connector on the back of your computer so that it recognizes the keyboard until Windows starts on your keyboard.

  The SATA driver applies to your hard drive.  A CD of start-up/installation of Windows XP does not recognize a SATA hard drive.  If you install Windows, you will need to hit F6 at the right time and insert a floppy with the SATA driver on this subject.

  HTH,
  JW

• Cannot send mail with windows mail. Get the pop-up Windows security.

  Cannot send mail with Windows Mail. Get the pop-up Windows security.

  Password and username are all correct. POP and SMTP everything is correct. If I remove all virus blocker, always get Windows security pop up asking for password and username; I type in it and click on the option to remember, but the window appears several times without sending a message. Error message box is empty.

  No problem on the end of e-mail servers. Equipped with Windows Vista.

  I deleted the Windows Mail disabled account, rebooted with the new account and the same problem.

  Can I receive the mail, but Windows Security blocking my attempts to send and don't remember the password and username that I type.

  Help!

  This kind of behavior is very often due to antivirus.  You are using.  If its McAfee or Norton get rid of them completely.   There are others who are also incompatible.  Everything you try, make sure that the analysis of e-mail is disabled.   You can also try to repair the database and see if that helps (see www.oehelp.com/WMUtil/).  And see also www.oehelp.com/OETips.aspx#3

  Steve

• Windows 2008 R2 as a guest cannot get the IP address of the server (VMware workstation 7.1.3 on Windows 7) professional

  Hi gurus,

  I installed VMware workstation 7.1.3 on my Windows 7 laptop professional x64bit and I can run my old VM (XP) without any problems in this regard. And I tried to install a new client (Windows 2008 R2 Standard x 64) on this subject, when I put the NETWORK card in the deck, he cannot get the IP address from my DHCP, always show me error "Windows has detected an IP address conflict...". ", I tried the IP static installation for her also, same result.

  I tried to install a new windows Server 2003 as a guest (also defined as a network bridge), it works very well, can get the IP address from my DHCP or can set a static IP address with no problems. Does anyone have a similar experience on this combination? Any solution to this issue?

  Best regards

  BUGBUG

  I recently managed to get bridge network work with a Windows Server 2003 R2 SP2 guest in VMW Workstation 7.1.4.385536 on a host Windows 7 SP1 Ultimate.

  VirtualBox 4.0.4.70112 is installed on the host and disabling the 'VMware Bridge Protocol' in the 'VirtualBox in Ethernet Adapter"on the host was necessary.

  Outpost Firewall Pro 7.1.0.3415.520.1247 is also installed on the host computer and I used some information from the link below to add some necessary firewall rules.

  http://www.agnitum.com/support/KB/article.php?id=1000061

• Cannot open attachments in Microsoft Outlook, to get the message that Windows found that this file is potentially harmful and has blocked access to this file

  Original title: prevention of security Windows opening attachments

  I can't open attachments on emails sent to my email for Microsoft Outlook - it has recently started to happen. I tried to change the security settings in Outlook but they seem to be on the normal and the option to block potentially harmful messages is not checked. When attempting to open the attachments, I get the message that Windows found that this file is potentially harmful and has blocked access to this file. Any can you please suggest how to change it, it occurs on all email attachments, even those I know are safe of them have opened on another computer.

  Thank you, Alistair.

  Hello

  Sorry to hear that.

  You use a browser to open emails or a customer e-mail like Outlook Express?

  Respond with more information so that we can better help you.

• I signed on XP Pro SP3 as an administrator but you cannot change the timing of Windows Update to 03:00. All options are not enabled. How can I change the time, updates are made? __

  I signed on XP Pro SP3 as an administrator but you cannot change the timing of Windows Update to 03:00.  All options are not enabled.  How can I change the time that updates are made?

  Hi imoffshore,

   

  Welcome to Microsoft Answers Forums.

  We would like to get some more information from you to help solve your problem. You better, please answer the following questions.

  ·         When was the last time it worked?

  ·         Remember to make changes to the computer recently?

  ·         You have security software installed on the computer?

  ·         You get the error message?

  When you open the tab automatic updates in the control panel or My Computer property sheet, all options of configuration of the automatic updates may be grayed out. This happens due to one of the following reasons:

  1. You are not logged as administrator (or equivalent)
  2. Strategy of automatic updates is enabled
  3. Automatic updates (and Windows Update) access is blocked by group policy

  The options available for automatic updates.

  You must make some changes in the windows registry.

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  • Click Start, run and type REGEDIT to . EXE
  • Go to this location:

  HKEY_LOCAL_MACHINE-SOFTWARE-policies-Microsoft-Windows------WindowsUpdate------AU

  • In the right pane, delete the two values AUOptions and NoAutoUpdate
  • Go to this location:

  HKEY_CURRENT_USER-SOFTWARE-Microsoft-Windows-CurrentVersion------policies------WindowsUpdate

  • In the right pane, delete the DisableWindowsUpdateAccess value

  Using the Group Policy Editor - for Windows XP Professional

  • Click Start, run and type gpedit.msc
  • Navigate to the following location:

  => Configuration of the computer
  ==> Administrative templates
  ===> Windows components
  ===> Windows Update

  • In the right pane, double-click Configure automatic updates and set it to not configured
  • Next, go to this location:

  => User configuration
  ==> Administrative templates
  ===> Windows components
  ===> Windows Update

  • In the right pane, set to remove access to all Windows Update features on not configured

  Change how Windows installs or notifies you of updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-how-Windows-installs-or-notifies-you-about-updates

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot get the file to be imported.

  I tried the method of JoseIbarra - I did as suggested but cannot get the file to be imported in the services file. He never asked me if I wanted to add the information in the registry, so it is still on the office. Don't know what to do from here.

  Please stick to the initial conversation.

  Is this you speak of course (*first conversation*):
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/how-do-i-get-print-spooler-back-into-my-Windows-XP/ed014329-1bd3-458d-9C93-bbb306fc731f

  You also made this one:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/print-spooler/c4610093-a96f-4476-B263-eecf5b8fc339

  (but please do not reply to this one...)

  And this one:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/continuation-of-print-spooler-problem/0e885d7b-3e64-42ee-A248-9d9f2a8e26c5

  (Even once - keep the * first conversation * going.)  Written on it.  Show how this conversation continues spreading around.)

  BTW - my suggestion has not changed.  I still think that you get just around issues that still exist, probably, by fixing the little things you need at a given time.

  Backup important files/folders (for you) (including documents, photos, music, Favorites, Internet favorites, files installable application, serial numbers, product keys, spreadsheets, you saved to the desktop email, etc.) and wipe the disc completely - I'd even a zero writing on the disc (formatting) before installing the operating system from the original installation media.  Then install your applications and restore your files.

  As to what they were asked to do... Always seems that you saved the file as a *. TXT file and not a *. REG or there is much more wrong with your machine (see my suggestion above.)

  Visit this web page to look at the photo on the left (a first) to see the screenshot of the possible is the desktop icons and let us know if it looks like the left or right of each photo version (answer here or in the longer conversation.)  * Ignore the first part of the file name - as you might have named something else than "addspooler."

  To check if you saved incorrectly or if there is something wrong with your system (or two) - right click on the file you saved and choose 'Properties' from the menu you get.  Under the 'Général' tab, she said, "file Type: registration entries (.reg)" and "opens with: Registry Editor" or something similar?  Visit this web page to look at the picture on the right (second) to see the screenshot of the possible look at the windows of the property and let us know if it looks like the left or right of each photo version (answer here or in the longer conversation.)  * Ignore the first part of the file name - as you might have named something else than "addspooler."

• When running defrag, error "MMC cannot open the file c:\WINDOWS\system\dfrg.msc.

  When I run the defrag I get a message that says "MMC cannot open the file c:\WINDOWS\system\dfrg.msc. It is perhaps because the file does not exist, is not the MMC, or was created by a later version of MMC.

  Hello

  I tried the steps before I posted my question, but it did not work. However, I downloaded SP3 again and it seems to work now.
  Thank you

• Could not open computer management. I m, like__MMC error message cannot open the file C:\WINDOWS\system32\compmgmt.msc

  I am the administrator total privileage still i'm getting the following error...

  MMC cannot open the file C:\WINDOWS\system32\compmgmt.msc

  It is perhaps because the file does not exist, is not an MMC console, or was created by a later version of MMC. Perhaps it is also because you don't have sufficient access to the file.

  I am the administrator total privileage still i'm getting the following error...

  MMC cannot open the file C:\WINDOWS\system32\compmgmt.msc

  It is perhaps because the file does not exist, is not an MMC console, or was created by a later version of MMC. Perhaps it is also because you don't have sufficient access to the file.

  Hey Sandy_Nepal

  read the answer below

  http://www.Winhelponline.com/articles/72/1/error-message-when-you-try-to-open-a-MMC-console.html

  http://www.allpostnews.co.UK/II27/compmgmt%20msc%20error%20messag.php

  Walter, the time zone traveller

• Is - is this legitimate? I get the following requires Windows Genuine Advantage from Microsoft Corporation: Validation status: Action required

  Is - is this legitimate?  I get the following requires Windows Genuine Advantage from Microsoft Corporation: Validation status: Action required
  The validation process cannot continue because your web browser is not configured to run the components required by the genuine validation process. The following will help you solve this problem and continue with validation.

  The information bar is shown below.

  1 1 clic click right on the information bar and select install the ActiveX (see below) control

  2. when the Internet Explorer security warning dialog appears, click on install.

  If the ActiveX control does not properly install, you can click on the button OK below to start the posting process replacement (optimized for browsers unable to perform the initial validation script).
  Is - is this legitimate?  I get the following message claiming to be Windows Genuine Advantage from Microsoft Corporation:
  Validate now state of Validation:

  It is valid only if the message comes from Microsoft.com

  Go to this Web site in Internet Explorer: http://www.microsoft.com/genuine/validate/

• MMC cannot open the file C:\windows\system32\WF.msc

  When I try to open the Action Center, I receive this message. MMC cannot open the file C:\windows\system32\WF.msc

  Hello

  Thanks for posting the question in the Microsoft Community forums.

  According to the description, you get a message of error 'mmc cannot open the file C:\windows\system32\WF.msc' when you try to open the center of the Action.

  We will perform the steps and check.

  Method 1:

  
  Try to access the Windows Firewall configuration through the console Microsoft Management console.
  
  a. click on start
  b. type MMC (right-click and choose Run as administrator)
  c. click on file (in the upper right corner)
  d. click Add/Remove snap-in software component
  e. Select Windows Firewall with advanced settings, in Add Remove snap-ins windows
  f. click Add (clicking ok does not make any changes)
  d. click OK and you should be able to use the settings of the Console 1 window.
  
  Method 2:
  
  If you are able to use the settings of the firewall through MMC, then scan your computer for corrupt system files.

  Perform a SFC scan on your computer. Consult the following link:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Hope this information helps. Please reply with the status so that we can help you.

• Cannot open Device Manager or services.msc a message box pops up it says "MMc cannot open the file C:\Windows\system32\devmgmt.msc.

  Original title: I can't connect to my wireless network. My convenience store does not work and I can't open the network and sharing Center. I'm sure it's some type of virus. Help, please.
  It says "an unexpected error has occurred. The Troubleshooting Wizard can not continue. "When I try to run the troubleshooter.

  When I try to open Device Manager or services.msc a message box appears, it says "MMc cannot open the file C:\Windows\system32\devmgmt.msc.

  He said also my Defender pro subscription has expired, even if I've just recently added a one year subscription.

  Hello

  You did changes to the computer before the show?

  Method 1:
  Try these steps and check if it solves the problem:
  a. click Start, type cmd, right click and select run as administrator.

  b. at the command prompt, type regsvr32 msxml3.dll , and then press ENTER.

  Method 2:
  Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 3:
  Run a Microsoft security scanner to make sure that the computer is free from virus infection:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  WARNING:
  If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also if the files and folders are affected by the virus, while they might even get deleted

  See the steps in the link and check.

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows