(Redirected) error 0x000007b

Similar Questions

• HP Probook 1 470 improved Win 8.0 to 8.1 3D Driveguard gives error 0x000007b

  Hello

  I have a problem with a customers laptop. HP Probook 470 1 update Win 8.0 to 8.1 since the 3D Driveguard gives update code error 0x000007b cannot start the application.

  I already installed the latest version that is on the website of the portable VER 6.0.16.1 the same problem.

  I found on another page Web of HP, a newer version 6.0.19.1 tried with this one, because it is a version recently but same problem.

  What should I do to solve this problem.

  Thank you

  Best regards

  Didier

  Hello:

  See if the post on this thread marked "Resolved" also works for your situation.

  You can read through the post and the solution is the last post on the second page.

  Seems to be the same error...

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/win-8-1-vs-HP-3D-DriveGuard-accelerometer/TD-p/3591133

• Application error (0x000007b)

  I just recently upgraded to the creative cloud and for all my programs in 64-bit, I get the following error (0x000007b). Fortunately I found solutions to most of the programs except SpeedGrade. The issue seems to be with a few .dll files, Adobe offers even a download for some programs... but unfortunately I have not found a solution for SpeedGrade.

  I tried to uninstall "Microsoft Visual C++ Redistributable" makes registry cleaning provided by Adobe and Microsoft and Adobe... uninstalled and reinstalled but without success.

  I am running Windows 7 Home Premium, i7processor, 16gigs of ram and 1 TB hard drive. None of this should be a problem because it everything worked before at some point in time.

  Any help on how to fix this would be appreciated.

  Install this: https://www.microsoft.com/en-us/download/details.aspx?id=40784

  Works for me.

  Best regards

• Error 0x000007b application

  I tried to open a program (associate of Hp and other programs I have installed) on my system and I get the messgae of Application error "the application could not start correctly (0x000007b). Please someone at - it a solution?

  Hello

  1. with what application are you get the error? The problem occurs with all applications?

  2 have you used this application as soon as possible without any problem?

  3. any changes to the computer before the show?

  Method 1:

  You can try to perform the clean boot and check if it helps. For more information, see the following link:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of section above.

  Also, try the steps from the following link and check:

  How to solve problems when you install or uninstall programs on a Windows computer

  http://support.Microsoft.com/kb/2438651/

  Method 2:

  I suggest you to check a disk for error and see if it helps, here is the link:

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

  Method 3:

  You can run a full scan of the computer by using the Microsoft Safety Scanner and check if this solves the problem. For more information, see the following link:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Also, check the event viewer for more information about the error, here is the link:

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

  Let us know if it helps!

• PayPal redirect error - redirect ok for extraction, but not to pay the Bills later

  Has anyone got people to pay paypal after a command?

  We have set up perfectly for extraction of paypal. Customer pay so they come back to our Web site and see that they have paid.

  But if the client gets an order and then connect online to pay (for example http://bit.ly/Uc85R5), Paypal will bring to their payment page, take payment, but when it comes to their return to our site, that an error message appears:

  ERROR: An unknown error has occurred. This is probably due to the merchant profile is not set up correctly. Please contact your system administrator for assistance.

  Payment works well, it is just the redirect page, confirming their payment. I think that the reason for the error is something to do with the code.

  https://ourwebsite.worldsecuresystems.com/PaymentProcess.aspx? paypal = success & tx = 2D355607H4466902T & st = completed & amt = 0.02 & cc = AUD & cm = 13031601 | ff02efc9 - 0D 0 9 8-47f6-8465-da202fadf4f5|eedcf84b-ce7e-4ea6-a8d1-8ed23da22f35|10%2f17%2f2012%2003%3a35%3a4 & item_number = 1817147

  All the parameters of paypal are very good and according to the knowledge base for the catalyst business.

  -The only thing I can think to do is to create an element named 'payment' and customers to send the payment link to pay for their order - IE add the element of payment to a new basket and check like that. Any advice?

  Best,

  DD

  Hi DD,

  Usually, when the error "merchants profile" there is an incompatibility with your PayPal account.

  Please check with PayPal and you use the main e-mail address associated with your PayPal account.

  If still no luck, I recommend a referral to support us and provide your contact information so that we can verify the details and your installation.

  http://helpx.Adobe.com/contact/index.html

  Kind regards

  -Sidney

• (Redirected) Error: Internal no boot the disk sector

  I am new to the forum community.  I hope this is the right place to post a question.

  I have a Dell Inspiron 1545 Windows 7.  When I start the computer, I get the above error.

  When I press F1 resume and proceed with startup as if nothing is wrong.

  Why I get this message and how can I fix this problem?

  Any help?

  As you have a laptop, better make this laptop in the computer Forum post here:

  http://en.community.Dell.com/support-forums/laptop/default.aspx

  Bev.

• (Redirect) - error msg 'restore instant snapshot creation has failed.

  in my activity log, I notice one note an error msg that continues to repeat "restore instant creation of snapshot has failed.  Any suggestions as to what could be the problem? Thnx in advance...

  Padraigmaca thanks for the reply. Please repost this in the laptop computer forum for assistance.

  http://en.community.Dell.com/support-forums/laptop/

• (Redirected) Error code

  Hi I have a dell laptop windows 7 Home Edition premium there an error 0xc0000022 code which I can't use the laptop i. mode only Normal safe mode that he says that the application has not able to start properly

  As you have a laptop, better make this laptop in the computer Forum post here:

  http://en.community.Dell.com/support-forums/laptop/default.aspx

  Bev.

• (Redirected) Error POST LED codes laptop Studio XPS 1647

  (I posted this on the forum of portable equipment, but it has been a few days so far that there is no help yet).

  Symptom:

  Studio XPS 1647 computer laptop cannot start after POST and pasted to the Dell screen with about 80 percent progress bar. After that now the FN key and press the power button to start ePSA, all three volumes would be flashes two times, immediately followed by the MUTE LED flashing layout and then jump, followed by up and down LEDs + turn signals and the volume upward the LED switches off the coast and then just the Volume Down LED flashing continuously. The fan is switched on immediately after the PSA starts at slow speed, and then it runs faster after a few seconds with the noises.

  My Studio XPS 1647 has recently had overheating problems, and sometimes they would cause BSOD. A reboot after BSOD shows always broke the screen images. The BSOD has always come with error bcode 116: it's apparently related video card. Last weekend so I opened the case, removed the radiator and fan. The event of heat sink was completely blocked with a thick layer of dust, so it is no wonder the overheating. I have cleaned the vent system to the radiator and fan, cleaned the top of the processor and the upper part of the GPU chip, the shape of base paste heat and everything back together. After that, the machine could not go to the Dell splash screen at startup.   I already checked the discussions and followed suggestions on holding down the power button to remove static, the reinstallation of the memory card, etc., but they are of no use.

  The following video shows the locking POST LED codes:
  http://youtu.be/l0zbweEeCYY

  cs_setInnerHtml ('video_ecc56317-e9df - 4 c 82-a36d-f4e0f34ae06b', ");

  Thank you
  Troy

  Hi shng,.

  Mobile forum would be the right place to get help. Back to the forum of the laptop and make a comment on your original post so it floats on top again.

  http://en.community.Dell.com/support-forums/laptop/

• (Redirect) Error 2000 - 0146

  Hello

  I made the diagnosis of my Inspiron N5110 and got him.

  error code 2000-046

  Validation 22240

  HD S/N 6VESD21L

  How solve this problem from my laptop because it was weird whenever I start using windows Explorer and selected or try to open all files it become extremely slow and end up by not responding not of the entire system and restart the laptop again.

  Hi Winsev,

  Please repost this in the laptop computer forum for more experts.

  http://en.community.Dell.com/support-forums/laptop/

• Page redirect error 310 Web Cookies / Cache disabled, timer checked, Etc. problem remains

  I get an error code 310 on a contact/contactus.php one Web page.  I did research online, erased the history of navigation, cache, cookies, etc. from "beginning of time".  I have checked the clock on the computer for synchronization, verified extensions, etc.  I use Google Chrome as my browser, and because all my devices are "synchronized" this problem extends on all devices.  I found a site where a person has contact Microsoft support, and Microsoft has solved the problem, which turned out be a sort of minor correction coding.  Correction information was not shared on the website.  I noticed that Microsoft charges a one-time charge of $80.00 or an annual fee of $290.00 for technical assistance.  It would be nice to escape the payment of a fee to fix a problem with a Web page.  Unfortunately, the Web page is quite important in my life, so I have to have the problem solved by a person.  I don't know who that someone will be at the present time.  Thought I'd start by posting the question on the forum I thank you for reading and reviewing this application.

  This problem was caused by a problem of Web site.  The site has since corrected their problems and there has been no difficulty new connection with the link to the Web site.  Thank you for your patience.

• Cannot launch Lighroom: I get this error (0x000007b). Reloaded several times. Has been out for several weeks. Worked with support on this but still not solved.

  I have re-uploaded the Lightroom 2015 application.  Now I get a new error with screenshot below.

  Please notify.

  Thank you

  Gary Smith

  [email protected]

  

  Solutions for Photoshop Lightroom 0Xc000007b error

• Redirect error to mobile layout

  Hello

  I have a problem with my site. I made a mobile model, but on my laptop I don't see, all I see is the desktop version. My site is http://trgovina-stella.hr . I check all my links on the site are for the mobile layout. Help, please!  Thank you!

  Hello

  Please take a look at this topic,

  Re: Muse does not redirect to the tablet website?

• View 5.0 Desktop and Folder Redirection error

  So I just upgraded to 5.0 view and also left the office xp for desktop windows 7 view.  They are running perfectly and there was little, if any, complaints from my users.  However, there is a question that seems to be common among users with linked clone desktops.

  Our group strategy has allowed our users to forwarding files and it works with linked clones.  Users can open and view documents in there redirected documents folder.  However, if they attempt to remove the file they are told that they need permission to do so.  For example, if domain\test of the user trying to delete its own document he'll tell him that it requires domain\test or, in other words, permissions to delete the file itself.  I don't know if it has to do with the creation of the profile in the linked clone or what.

  I also did some poking around to see if it's windows 7 partners and more said that it is necessary to turn off UAC to solve this problem.  I did, but am always faced with the problem.

  Any ideas on that?

  SB

  1 domain user must be a local administrator

  2 you can disale UAC of domain group strategy

  3. also need to tweak/configure behavior elivation correctly properties

  Below the snapshot can help you

  

• (Redirected) Error code 80246005

  Problem with driver for wireless network connection adapter

  Best of this post in the Forum Networking, Internet, wireless, here:

  http://en.community.Dell.com/forums/3324.aspx

  Bev.