(Redirected) Only black screen no signal after Respawn Alienware updated

Similar Questions

• Appearance of the SONY Internet Player NSZ - GS7 logo then black screen, no signal.

  NSZ - GS7 unable to connect to the TV without connection for SONY installation logo then only black screen no signal. Help, please? I bought this player online, the initial Setup was easy... connected wireless to the network, combined with distance and sound and picture was fine and applications/internet access has been fluid. months later, I moved the player to the original connection from the tv to another TV and then tried another, then two more. the same problem on all the TVs were as follows:-plugged the HDMI out on the drive to TV-connected the player to the wall outlet power source and changed input on TV by HDMI. THE RESULT... the SONY logo appears on a black screen for about 10 seconds then TV shows NO SIGNAL. exactly the same problem on every TV. I did the Ctrl + SHIFT + BACKSPACE thr remote to reset the player, but it does the same thing... no black screen with the sony logo seconds then the no response the television signal. Help, please. Thank you. SONY Google TV player Internet. Model: NSZ - GS7. Serial No.: GS7 U2 12 c S01-1031511-1

  Follow the steps below to access the screen in recovery mode.

• After logging on my Satellite Pro only black screen and the cursor are visible

  I have a windows vista pro (PSAASE-00G004GR) satellite after turn on and typing the password for windows vista, the screen goes black but I see that the cursor moves & because it seems that the hard drive also works in th background, but I can't see anything except the mouse cursor , I tried to boor with other options (LAST WORK safe MODE KNOWN FEATURES... etc) but it's still the same only black screen and the cursor...

  I do not prefer the product cause of my data recovery on this subject, any ideas?
  thnx

  Hello

  You have the Satellite Pro A100 PSAAS hmm if you want to save your personal data, I recommend to remove the portable computer HARD drive and try connecting it to another computer via an external USB HDD controller. These cases of 2.5 HARD disk are not expensive and you can buy it in every store of the computer.

  Then you could try to recover the laptop delivered together with the Toshiba Recovery CD.
  But wait; have you tried to connect the laptop to the external display?
  Check it!
  Maybe you could see something on the second screen.

  I think that this procedure could be useful to clarify what s wrong.
  To me this question looks like a small little dysfunction of the FL inverter.
  In this case the installation of the new operating system will help you not to solve this problem.

  But who knows the verification is necessary to find what could be wrong.

  Good luck and bye ;)

• Windows displays a black screen with cursor after the installation of updates

  I leave the official updates of Microsoft doing their thing last night before closing and I woke up today to see a black screen greeting me after that I entered my password on the start screen. The only thing that appears is HP Coolsense. No program, no nothing. It's just a wonderful black screen. The world how this issue fixed?

  Hello bean,.

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  What is the brand and model of your computer?

  Thank you for details on the issue.

  This problem may occur because of corrupted display driver. I suggest you to update the display driver of

  your computer and check if it helps. Please follow these steps:

  a. press the keys Ctrl + Alt + Delete , and then click Task Manager.

  b. click on 'file' and then click on "new task".

  (c) in the immediate window, type explorer.exe , and then click on ok.

  d. Office should appear. Otherwise, in the immediate window, type devmgmt.msc , and then click on ok.

  e. the device manager should open.

  f. expand 'graphics', right click on the display device, click "Update driver software", and

  Follow the on-screen instructions.

  After update display driver, you can correct the screen resolution using the following steps:

  a. right click on the desktop, and then click screen resolution.

  b. in the 'resolution', select the recommended resolution.

  c. click apply and ok.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• After update Windows7, Firefox is no longer in effect. Only black screen no menu only.

  Posted solutions include new download video driver. Not something I am qualified to do this. I don't understand why Firefox is the only browser hit after the Windows update. IE, Chrome, and Safari all work normal.

  Hello cwhowell2, if the ability to download a new driver update did not yet exist, disable hardware acceleration.

  If you cannot open firefox to reach the option of hardware acceleration, and then start firefox in SafeMode by pressing the SHIFT key pressed while starts the application and then disable hardware acceleration.

  exit firefox and restart.

  Thank you

• Satego X 200 - 21U - only black screen on startup

  Hello

  I am owner of a SATEGO x 200-21 U with geforce 8700 m GT. The last time I used it, it freezes within windows. Just the backlight lights up after reboot. I have no picture, just black screen.

  Even the Toshiba sign at the start of the laptop, the will does not appear. I think my interface is broken. I wrote to the Toshiba Service several times but I have no answer.
  I think that if you're out of warranty, you are off customership... friendly service... thank you Toshiba suggestions where I can get a spare part for my laptop?

  > If you are out of warranty, you're out of customership
  This is certainly not the truth. The only difference is that you pay for the repair when the laptop is out of warranty. For me it makes sense that this situation should be more interesting for services because they earn the defective notebook computers repair.

  If there are other SPAS in your country, call and ask for help.
  In general the graphics card replacement is not possible and I do not think that you will be able to find as unique hardware component. As far as I know, the whole motherboard must be exchanged.
  Where to find the new motherboard?

  You can try to order directly by Toshiba service partner or try to find that some used one on eBay.
  Hmmmmm... I fear it won't be easy to find it m.

• EliteBook 840 G1: Elitebook 840 G1: black screen with cursor after recovery from sleep mode

  Since yesterday, 15. August, whenever I take the laptop to sleep, all I get is a black screen and after a minute, a cursor on a black screen. The laptop does not revocer of this State. Only solution is to force the reboot.

  A reinstall of Win 10 has not changed anything.

  Video driver is version Intel official site. The version is 10.18.15.4248.

  I don't know if I got the version before the reinstall.

  I have installed nearly all other official drivers from the HP page packages.

  Any suggestions?

  Problem solved.

  Cause: I updated the 256 Vram 512 MB. This caused the mess. Put in back has solved the problem.

  This looks like an obvious bug to me, but who is responsible? Intel or HP?

• R2 black screen Windows 2012 After loging

  I am new to Microsoft windows server anyway especially r2 windows 2012, actually server was there for only the Ncomputing devices, so I have messy hair with it by installing AD and Hyper - V, after seeing these functionality affect my Ncomputing environment I just remove, it took a while to restart after restart of finishing and anyway I can't my Local account and I managed to to the field again with black screen and cursor only, I have trried to find ways through google but nothing exactly, someone with a help of there idea
  20:06

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Black screen on startup after windows update 7 crashed

  Hello

  Hope you can help.

  I have windows 7 64 bit installed and everything was fine until last night.

  It seems a windows update has been downloaded and when I turned my PC it was installing the update - the projection of the usual blue installation screen updates etc.

  It took a long time and it seems to me he had crashed, has frozen I couldn't move the mouse.

  Yes I know it says that you should not turn the PC while the update was the installation, but for me, it seemed like it had crashed and frozen upward.

  So I decided turn off the pc and he left the next day to check the pc.

  I turn on the pc and select windows 7 in my list - I have Setup dual boot

  I get the message that windows did not start properly, so I select boot normally - I get the swirly logo appear and then just a black screen with the cursor that responds to moving the mouse.

  There's just the black screen with the cursor and pass to the next step of the login screen.

  I think because of the windows don't update not install correctly and turning the pc off this contributed to hang on the black screen.

  I tried to start in safe mode to see if the same problem which he passes, I can connect via the SafeMode very well and have the available login screen and entered fine windows via safe mode.

  I get ideas as to what I can do to solve this black screen?

  To confirm once again, this has happened after a windows update tries to install, but as I felt it had crashed I turned off the pc - no drivers graphics etc. have been installed for a long time - only this update of windows

  I hope you can help, thank you very much

  InnI

  EDIT: Just to add that I tried to do a restore point, but as I turned it off I don't have the option to do so.

  Hi Martin,

  Thanks for the reply.

  I tried something last night after going through loads of forums.

  I tried F8 for advanced startup options, and I'll give you good last thinking setting up a go, known guess what, it worked!

  I was able to return in Office windows as usual, I even installed the update that it crashed on the last time, well, I think that he reinstalled the last update, it crashed on... anyway, I think I'm back to normal, but will check it out tonight but if you are still having problem try what I did It can work for you.

• I connect and portable shoot only black screen

  I connect to my hp Pavilion and it takes me only a blank black screen. I can move the cursor on the screen but can't do anything else.

  Hello

  Boot the computer normally and log.

  Black screen, hold down the ctrl and alt keys and press delete.

  Select Task Manager.

  At the bottom left, select details (if it is not already selected).

  Click in the header of column Nsoul to organize the processes in alphabetical order.

  Look for an entry called to run once Wrapper (RunOnce.exe) - If you see it listed, right-click on it and select end task.

  If your office now appears, download AdwCleaner on the following link (there are 4-5 second delay until it's available)- Save in your downloads folder.

  https://toolslib.NET/downloads/finish/1/

  A once downloaded, close all programs, open your download folder and double-click the application to run it (click Yes to any uac prompt).

  Click the scan button.

  When the results are displayed, click the Clean button - when you are prompted to restart, click Ok.

  It starts on the desktop correctly now?

  Kind regards

  DP - K

• HP Pavilion dv6: black screen with cursor after the connection

  For two weeks, my laptop lost sound through the speakers and plug headphones.  The computer recognizes there is a problem of devices not be enabled on troubleshooting menus, but when I check the devices individually and test says they are on and sound screens played... even if there is none.

  Due to this recurring problem, I downloaded the drivers for my system updated and uninstalled the old series and restarted my system.  Since then, I get a black screen after login and could make even spybot search and destroy scan my items, but that's all.  Computer still starts in safe mode and can run the Task Manager... Help?

  Hello

  Boot the computer normally and log.

  Black screen, hold down the ctrl and alt keys and press delete.

  Select Task Manager.

  Select the process tab and select to show processes from all users (lower-left).

  Click the column heading to organize the processes in alphabetical order.

  Look for an entry called to run once Wrapper (RunOnce.exe) - If you see it listed, right-click on it and select end task.

  If your office now appears, download AdwCleaner on the following link (there are 4-5 second delay until it's available)- Save in your downloads folder.

  https://toolslib.NET/downloads/finish/1/

  A once downloaded, close all programs, open your download folder and double-click the application to run it (click Yes to any uac prompt).

  Click the scan button.

  When the results are displayed, click the Clean button - when you are prompted to restart, click Ok.

  It starts on the desktop correctly now?

  Kind regards

  DP - K

• Re: Satellite A300D-13 has: problems starting - starts not or only black screen

  Hello, I have a Satellite A300D-13 has and the problem is, when I try to start the laptop for most, he tries to boot from the hard drive or the DVD drive but then he just stops and starts again immediately to do the same. In this case 4 or 5 times. Once it seems that it starts well, but the only thing I see is a black screen. And the keyboard does not work either.

  If I try several time with closing by pressing the power button (you know who I mean), I managed it starts normally (but such a situation is always annoying). Moreover, it seems that this happens only when I did use the laptop for a while. So maybe it has something to do with the temperature. But more or less 20 ° C in my room.

  In the Bios I have change the boot order of the sources (I can't change it much more)

  I am grateful for any kind of help.
  Thank you for your cooments in advance

  Hello

  The issue could be related to software, but also for the hardware problem.
  But first, we have to check if it s a software problem.

  You are using the original operating system preinstalled by Toshiba. Is this good?
  AFAIK the most recent series of laptop is equipped with HARD drive recovery option.
  In this case, the Toshiba Recovery DVD has not been delivered with the laptop but there is an option to create a.
  HARD drive recovery option can be used to reinstall and update the operating system.
  I would recommend to repair the operating system and reinstall it again by pressing the F8 key. The Advanced Startup menu should appear and then you must choose to repair your computer.

  This option will start the recovery procedure and the BONES to relocate again.
  Please check if a new facility will improve the situation with Notepad.
  In addition, it would be desirable to update the BIOS, if a newer version of the BIOS is available on the European driver Toshibas page.

  If this suggestion won't help you then whole notebooks material must be check by a local ASP.

• Movie Maker black screens. AVI after nVidia update

  I have been using Windows Live Movie Maker (15.4.3538.0513) for several months with no problems.  I've updated my nVidia drivers last night and now I get a black screen when you import .avi files into Movie Maker.  It worked before.  I did a system restore to the previous version of the video driver and Movie Maker is capable of processing the .avi files.  I also tried to reinstall the codec files, but I am at a loss on where to go next.  Help?

  .wmv files seem to be working before and after the upgrade from nVidia, but FRAPS capture .avi files, and I'm not interested in going the extra step to convert - it worked fine before.

  Looks like roll back the video driver is the answer. Unless you have
  a specific program that requires the view is not necessary to press to update
  anyway.

  Now, I see that you use Windows Live Movie Maker and this is why
  There is no compatibility tab. I guess I think of Vista Movie Maker 6 when
  I see a question of Vista.

  FWIW... .avi files can be converted to a lot in most of the converters and
  insofar as quality loss... the files will be converted in any case when Live Movie
  Machine saved as WMV.

  Vista Movie Maker 6 (better IMHO application) can record in DV - AVI.

  The following chart shows where the DV - AVI option.
  http://www.Papajohn.org/IMGs/Vista-PublishToComputerChoices.jpg

• Black screen on startup after installation of the wireless router

  I recently installed a Netgear Wireless - G Router (WGR614) on my computer vista HP laptop and since then, I have experienced a few problems. One day my computer was working fine. I stopped it and when I went to leave the next day morning, the screen was black with a bunch of small lines. It would not load anything so I stop and tried again. It's the same thing. I turned on and close my count, and when I opened it upward a few minutes later the screen was beautiful. Then, I have lived the "Blue Screen of death" 3 times. I researched what the problem might be and thought that I might need to update a driver. I went to HP Health Check and there were a couple of updates on a wireless adapter and a card reader, so I installed the updates. I have not experienced the blue screen since then, but I still have problems with the black screen when starting upwards. If I leave the computer open the black screen turns to a white/blue color and nothing loads. But if I close it then after a minute or two everything is. This could be the cause?

  Hello

  Start with the wireless router is not the cause of the problems. It is a stand-alone device that simply provides a network connection for your system. Offhand, I would say that you experience a hardware failure, and perhaps the time is simply coincidence. Knowing what was the error message stop can help to indicate where the problem lies, but your description of the problem is quite indicative of a hardware problem. Solve it will probably require involving a technician (contact HP if it is still under warranty).

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• a60 black screen HP 500 after logon

  I shut down my computer last night. It has been updated when I left. When I rebooted, I get a black screen after the newspaper. When I bring up Task Manager, there is stuff I just underway do not seem to have a desktop computer.

  They propably removed the trial version of Norton that you had when you first got the computer.  It has caused problems in some computers.

  As long as it works properly now is what matters.

  Good day!