(Redirected) Server upgrade issues

Similar Questions

• vCenter Server upgrade issues

  I'm looking to upgrade vCenter Server Application 5.1 to 5.5 and I have a few questions:

  Y would there be a way to migrate the current settings of my instance 5.1 to 5.5 new one?

  -Can I use the appliance of vCenter 5.5 5.1 ESXi?

  -Manage vCenter 5.5 5.1 ESXi hosts?

  Thank you!

  -John

  Y would there be a way to migrate the current settings of my instance 5.1 to 5.5 new one?

  Rep. : Please go through the KB: VMware KB: upgrading vCenter Server Appliance 5.0.x/5.1 to 5.5

  -Can I use the appliance of vCenter 5.5 5.1 ESXi?

  Rep. : Yes, you can.

  -Manage vCenter 5.5 5.1 ESXi hosts?

  Rep. : You can manage vCenter 5.5 5.1 ESXi hosts

  -vChinna

• The iTunes upgrade issue in early 2015 does not not on OS 10.6.8. How I found an earlier version of iTunes.

  The iTunes upgrade issue in early 2015 does not not on OS 10.6.8. How I found an earlier version of iTunes?

  General search for versions of iTunes available - http://support.apple.com/downloads/#itunes

  Note: Running an old version won't sync with a device iOS9. The only way to do is run a new version of the OS.

• Aurora-R4 upgrade issues & troubleshooting

  Hello, Alien Techies!... I come to you, here, now, humiliated and who have need of the councils for the control box... Let me start by listing my "original specs' followed by 'changes' everything / ALL next to or after (directly below), because I think it may be relevant to my points and questions.  Please note that I started at the time of the purchase with a modified version and upgrade to my request, and they DO NOT take into account the standard.

  MATERIAL - Alienware Aurora-R4 (X 79 with chassis ALX); 3rd gen - Intel Quad Core i7-3820 3,60 GHz CPU (* overclocked @ 4.1 GHz, Quad Core, 10 MB Cache), Seagate 3TO HHD 7200 RPM, 16 GB of RAM (excluding max. 32 GB) - 16 GB Dual Quad Channel (4x4Go) * overclocked DDR3 @ 1600 MHz, nVidia / GeForce GTX 660 @ 1.5 GB - nVidia SLI - AMD Crossfire (power connectors: 2 6 2 8 pin pins / power Bus Port) (: 2 PCI X 16 slots / dual video card supports 300 watts per card & single card 600 Watt), Creative Sound Blaster PCIe-X-Fi, integrated Real Tek ALC892 Codex 2 burner (DVD Blu - Ray &), media card reader 19-in-1, Real Tek Integrated10/100/1000 GB wireless network card MS3871 Bluetooth Wireless Combo WLAN802.11b/g/n, Power Supply is 875 Watt Muliti-GPU power supply approved and Micro-ATX card mother 07JNH0.  SOFTWARE - BIOS A06, Windows 7 Home Premium.

  MISE_A_NIVEAU / REPLACEMENTS - 1.) SSHD 4TB 5900 RPM w / 64 MB of Cache Memory & 8 GB NAND Flash, 2) Windows 10 home edition, 3.) BIOS A11... ONLY!  With the exception of a few small updates driver, I'm sure.
  

  My problems to surface around Thanksgiving, Christmas, he's 7 months after 3 years I had bought my Alienware.  It was a result of my first major update from Windows 7 to Windows 10.  My PC don't recognize even 10 Windows!  Instead, it / PC been force-fed Windows 10 conversion therapy through Remote Support assistance technique Microsoft.  Shortly after, in the week, was my first MOMENT BIG FREEZE, when out of nowhere, while surfing the internet entered my systems.  I could not even Ctrl + Alt + Delete for task register, fans revved up, and I couldn't do anything else the latest kind of hard reboot - disconnect the PC from socket... It would not happen again for another month or several weeks. And when my PC finally woke from its slumber of drunk and lazy, very, very slowly restarting black screen, try it is harder to take Windows or reject.  It took more time, once the main screen is running, and once he finds Windows.  My processors working OT, until finally about 15 minutes after its start in resting peacefully, the demon banished.  I could play, no problem, but when I was on a browser on the internet, and / or when I arrived 'Automatic updates of Windows' chaos, the demon returns, and the Big Freeze returned.  I know all this only in hindsight, looking back, 20-20. 

  It would increase only slowly, until the moment where 6 months that I have upgraded to Windows 10, she felt more fits, between half an hour sometimes a few hours at the end.  She's trying to restart, but seems completely Catatonic and unable to meet black screen alien find GOLD Windows and about every other day to once or twice a day.

  I replace my hard drive, after he died, and he had pretty much cloned it from the backup of the my new SSHD, listed above.  It's now my second update in less than 2 weeks, in the second week of June 2016 now.  My third update level, all now a few weeks apart, with BIOS A06 to A11.  I don't know why or how that is never presented as lacking a upgrade.  I did a lot of checking, cleaning, defraging and even added a new Trend Micro Security to protect my investment.  AND I STILL see the hiccups like those from my old hard drive.  Nobody seems to be willing or able to diagnose this problem as a problem that pre-existed before my new hybrid Solid State drive... A few days ago, I received an error message through troubleshooting with Trend Micro and do an F5 accumulated prior to departure.  * The error Code 2000 - 8314 and Violation 119539 "- something like CPU error msg thermal 100 c 100 c thermistor PC exceeds the thermal limit out of reach."  I do not know.  Is this one of my chipset, processor or fan around my motherboard?
  

  I want to apologize for this drag all this, but I believe that the devil is in the details.  So, thank you for your patience.  And I appreciate any input at all in my ongoing troubleshooting.  I spent enough money in the last two weeks.  And my own brain is pretty fried at this stage of troubleshooting by internet.

  Now, A QUICK or a possible upgrade issues that I hope might actually alleviate part of the symptoms or even problems entirely... I would like to top off my 32 GB maximum RAM with of 4x8Go.  It seems that thought that there are very specific for my Alienware sticks, and I have to stay with this margin does not overwork anything.  I also want to do it myself, as I did with my other Dell Dimension 4700 PC.  I just need directions to wait for him, because I have other fires to put again AND / OR maps specific 8 GB RAM can I work with my R4 Aurora?

  "Play hard and go home!"
  

  REMOVE ALL OverClocks (I suggest permanently if you want a stable system that lasts a long time)

  Run Diags ePSA. Repair everything falls down before continuing.

  http://en.community.Dell.com/Owners-Club/Alienware/f/3746/t/19530277

  Make sure that the machine is not overheating and SMART is good.

  Use usb.iso to try a clean install of Windows 10/64-bit (for one SSD/HDD Virgin) to rebuild from scratch. Perhaps the migration of drivers and legacy applications during the installation of the upgrade was not 100% or you have an incompatible application in Win10 or the installed driver.

  http://en.community.Dell.com/Owners-Club/Alienware/f/3746/t/19679918

  A real SSD is faster than any hybrid SSHD. I love real 240 GB SSD as boot C: and install only Windows and main applications on this subject.

  16 GB Dual Channel Quad (4x4Go) is very well - don't mess with it.

  Never used Trend-Micro-Security. On Win10/64, I use Windows Defender & firewall.

  Maybe try this:
  REMOVE ALL OverClocks
  Disconnect existing SSHD (becomes a backup).
  Install SSD 240 GB (or 100% perfect player)
  Clean-install Win10-64 to blank disc
  Mainly use Microsoft only provided drivers from Windows Update
  Install only Win10 updated applications, use Windows Defender & firewall free for now
  See how it works.

• Database MS SQL Server with AIX server connectivity issues

  Hi all

  I am confronted with the below with the AIX server connectivity issues.

  Operating system: AIX 64 bit

  DB: SQL Server 2005

  EPM Version: Hyperion 11.1.1.4

  Error creating socket to host and port 1433. Reason: Connection timed out: could be due to an invalid address

  Tired of Solution

  (1) checked the properties of TCP/IP, its permitted.

  (2) ping the source and target servers both ends all works fine

  (3) firewall is DISABLED in DB Server

  Hi all

  My apologies, its number of firewall & network. Resolved by the Unix administrator.

  Thank you

• Hyperic server upgrade...

  I connect today and see that there is a new version... is there a how-to, or something somewhere on how to upgrade the application?
  
  Thank you

  If I remember (it was a few months), the server "upgrade" path is.
  in general, / home/hyperic. The installation program is the "Server" under that.

  Of course, the "setup.sh" is NEW a new version.

  John

  > I found a few old discussions (with a link to the current version) that
  > mention d'executer./setup.sh-mise at level
  >
  > But wtf is the full path to the server to be upgraded?  I tried every
  > combination of /home/hyperic/server-3.0.4\ *. * less the asterisks of
  > courses and nothing works.  People aren't usually upgrade and prefer
  > install fees?  If this is the case, is there a market to follow anywhere on this
  > procedure?

• Indesign CS3 to Indesign CS5 server upgrade

  Hello

  I searched on the adobe site to check if I can get an upgrade to Indesign CS3 to Indesign CS5 server. I have Indesign CS3 license, but must migrate to Indesign CS5 Server. Does anyone know if it is possible to buy Indesign CS3 to Indesign CS5 server upgrade. Or I have to buy a new license for Indesign CS5 server. Any help on this is appreciated. Thank you.

  This page has an email contact to Adobe, they of course adapt the package to your needs.  And although I don't know for sure I doubt if one individual copy of Indesign CS3 you will give to any upgrade price for CS5 server, given the price would have been started in the region of $20 K...

• Problem with redirect server-side

  It's a little strange. I have a redirect server side which works fine on my development CF8 server, but throws IllegalStateException when it is performed to my host (hostmysite.com).
  
  EDIT: actually, the ColdFusion exception message is:
  access denied (java.io.FilePermission C:\Coldfusion8\wwwroot\WEB-INF\cfclasses\cftarget2ecfm168784208.class writing)
  
  The error persists until I have navigate to the target page manually. Then the redirect works fine until I come back and try again the next day. Same problem, error java.io.FilePermission until I navigate to the target page.
  
  It's almost like the redirect server-side is looking for a class file compiled for the target page. This class file must not exist in the cache until I have access the page manually. These pages compiled must then the timeout at one point.
  
  All this experience or have some insight on what's going on?
  
  edited for clarity, and to include the exception message for ColdFusion
  
  

  The hosting company has been able to solve my problem. Turns out be a permissions problem. Here is their response...

  Quote:
  It was a problem of the SandBox security permissions in ColdFusion. Basically, ColdFusion to be able to write to some directories and files, but did not have access. Once I gave him access, everything seems to work fine. The permissions were a little outside the standard permissions, why it did not work initially.

  From a previous post, they mentioned the ColdFusion template cache folder:

  Quote:
  I added the reading, writing, and remove access to the C:\Coldfusion8\wwwroot\WEB-INF\cfclasses\ who must get rid of the errors that you see.

• (Redirected) The motherboard - issue thermal ventilation upgrade Active

  Hello

  I think the upgrade from my old Area 51 (if I remember well that was the chassis of the Lunar shadow of 2010)

  I am concerned about the heat evacuation Active on the top of the base, if I put in a new generic motherboard, will be evacuated in the upper part of the chassis remains open? (they have a default open state?) I guess there is nothing to connect to on the new Board of Directors, unless she uses an internal USB

  Any advice is greatly appreciated on this

  Thank you in anticipation

  Andy

  Best of this post in the Alienware owners Club Forum, here:

  http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

  Bev.

• Why Firefox denies my request for websocket server upgrade? (It works using Chrome)

  I have a simple web page that I use to test my server websocket manipulation.

  < meta charset = "utf-8" / >
  < title > WebSocket Test < /title >
  < script language = "javascript" type = "text/javascript" >

   var wsUri = "ws://192.168.1.18/";
   var output;
  

   function init()
   {
     output = document.getElementById("output");
     testWebSocket();
   }
  

   function testWebSocket()
   {
     websocket = new WebSocket(wsUri);
     websocket.onopen = function(evt) { onOpen(evt) };
     websocket.onclose = function(evt) { onClose(evt) };
     websocket.onmessage = function(evt) { onMessage(evt) };
     websocket.onerror = function(evt) { onError(evt) };
   }
  

   function onOpen(evt)
   {
     writeToScreen("CONNECTED");
     doSend("WebSocket rocks");
   }
  

   function onClose(evt)
   {
     writeToScreen("DISCONNECTED");
   }
  

   function onMessage(evt)
   {
     writeToScreen('RESPONSE: ' + evt.data+'');
     websocket.close();
   }
  

   function onError(evt)
   {
     writeToScreen('ERROR: ' + evt.data);
   }
  

   function doSend(message)
   {
     writeToScreen("SENT: " + message);
     websocket.send(message);
   }
  

   function writeToScreen(message)
   {
     var pre = document.createElement("p");
     pre.style.wordWrap = "break-word";
     pre.innerHTML = message;
     output.appendChild(pre);
   }
   window.addEventListener("load", init, false);
  

  < /script >

  WebSocket test

  I use a TI CC3200 to run the Web server code.

  It turns out TI implementation expects to find the upgrade header followed by the key in the query. This is the reason why he was working for the chrome.

  FireFox has the key before the upgrade header. TI code was not the key and just using a string NULL for her. So the answer accept had something to reasonable search, but didn't.

  It would have been nice if firefox didn't would be out something on the data of accept being wrong.

  In any case, TI is aware of the issue.

• ACS server installation issues

  I have a client of the remote site that is replacing their ACS servers and several questions:

  (1) what version we should be installed?

  (2) where we can get a clean binary installer (or do you start with 3.x or 4.0 & upgrade-if upgrade, use us the latest hotfix installer, or do we apply successive patches?)

  (3) replication between versions? Current servers have version 4.1 (1) build 23 Patch 5-do these need to be upgraded to the current version, or can move us later & replicate current?

  (4) is it possible to use different DNS (ex rtpacs.corpnet2.com) name for the site of 'real' server name (e.g. us2sawn00232.us1auth.xxxx.com)?

  (5) how to use GSK signed cert? Have previously tried & failed - something special here?

  Thanks for any help you can give.

  RO

  
  I have a remote site customer that is in the process of replacing their ACS servers,and have several questions:
  1) What version should we be installing?
  2) Where can we get a clean binary installer (or do we have to start with 3.x or 4.0 & upgrade-if upgrade, can we use latest patch installer, or do we have   to apply successive patches?)
  3) Cross-version replication? Current servers have Release 4.1(1) Build 23 Patch 5-do these need to be upgraded to current version, or can we install latest & replicate from current?
  4) Is it possible to use different DNS name (ex rtpacs.corpnet2.com) for website than server's 'real' name (ex. us2sawn00232.us1auth.xxxx.com)?
  5) How to use GSK-signed cert? Have tried previously & failed-anything special here?
  Thanks for any help you can give.
  RO
  

  Hi Richard,

  For your queries for replication ACS should be the same version, only then you can replicate between the ACS patner, if you have the same version, so your first and third query got the answer.

  For your fourth query, you can use the DNS server to host your web servers as when the user access the traffic of your web site will land in your DNS server where it will redirect to the origin server so that the DNS server should be authority server for your Web site.

  For a binary installation clear I would say check out this link http://openacs.org/forums/message-view?message_id=1245671 I hope this helps.

  So useful note valauable post.

  Concerning

  Ganesh.H

• How to clean of the Mac server permissions issue

  I'll have some very frustrating problems with permissions in the Group shared on mac server folders. When I create a new set of permissions at the top of the folder hierarchy and spread so it seems just create another copy permissions in all folders under the root rather than deleting the previous permissions and write those I want to set up. In other words, I end up with several sets of permissions by user for each folder and file.

  So the question I'm asking is how to clean all these permissions to all folders and files and start again?

  The main issues I'm having, it's that I have even with full administrative rights'm get denied permission to open files and save them to the server.

  My server is running OS X El Capitan 10.11.4, version 5.1 Server mac

  The simplest (and usually faster) is to clean up you permissions to use the chmod of the Terminal command.  If your ACL multiply in an uncontrolled manner (please not that some versions of Office for Windows, used to cause this) you can quickly delete all the ACL, and then start again.  To do this, follow these steps:

  1: stop all services of files to ensure that no one is change data while you work on it.

  2: remove all ACLs by using this command (replace with the actual path to the data):

  sudo chmod-r n/path/to/your/share

  This will remove all the ACLs for all files and folders/path/to/your/share and recurse to everything in the folder.

  Now, if you think that your POSIX permissions are Leech, you can also reset this with two orders of the handle.  To restore all standard directories umask, use:

  sudo find/path/to/your/share-type d - exec chmod 755 ().

  To restore all files standard umask, use:

  sudo find/path/to/your/share-type f-exec chmod 644 ().

  Note: Your permissions model may be more restrictive and some workflows rely on the limitation by POSIX.  If so, these commands do not be what you want.

  And there you have it.  The three commands above can remove all ACLs and set all folders to 755 (drwxr-xr-x) and all files to 644 (- rw - r - r-).

  Once you reset data, return to Server.app > sharing or.app > server > storage and assign your permissions.

  Reid

  Apple Consultants Network

  Author - "El Capitan Server - Foundation Services.

  Author - "El Capitan Server - Collaboration & control»

  Author - "El Capitan Server - Advanced Services '.

  : IBooks exclusively available in Apple store

• Redirect server to client for certain file types.

  Hello

  I try Windows server 2012.

  I'm testing RemoteApp through desktop Services remotely.

  The software I use for my my tests is a customer of dynamic GP10.

  So far, it works like a charm.

  We have a plugin installed to easily produce lists (SmartList)

  It allows users to export lists to excel. (It creates an excel file and try to open)

  Question:

  I want to transfer generated excel files to the remote client connected so it can be opened by its local installation of Microsoft excel.

  Generally speaking, do something similar to the redirect print job to the printer of the client.

  Is it possible to do?

  I searched and found some interesting information, but still no easy way to do it.

  I find many articles on XenApp and Citrix that might be able to do.

  Of course, I could install MS Office on the server, but all my clients already have the OEM versions of Office installed so that we do not want to spend more money for licenses of office additional.

  I did something similar many years ago with a virtual Windows XP Setup using vmware on a Mac OS x computer.

  And with vmware, in this particular case, it was very easy to do.

  Question:

  It may be possible to do it with a script by using ASSOC and FTYPE commands.

  I read the help page explaining the syntax ASSOC and FTYPE. But I am not able to understand what it takes to write my goal.

  So, if it can be done this way, is there someone who could help me with how to build such a scrip?

  Thank you

  Ask in the forum Windows Server:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• A standard Small Business SERVER 2003 Server upgrade SBS Server 2003 R2 STandard requires the new CLIENT access licenses?

  I got a new server and the server only supports the SBS 2003 R2 and more. I have tried slipstreaming drivers and all that already, without success. I have SBS Server 2003 Standard now with 15 CLIENT access licenses. If I buy a copy of SBS 2003 R2 on ebay to get the installation done, Microsoft requires new or different CLIENT access licenses or licensing of the R2 or 2003 SBS CAL upgrade existing will be sufficient? Any info would be much appreciated!

  Thank you

  You can find the Windows Server on TechNet support at the following address: http://social.technet.microsoft.com/Forums/en/winservergen/threads

• The MCS 3.1.1 SP 3 MSC 3.2 SP1 server upgrade

  I get an error when trying to upgrade my server MCS SP1 3.1.1 to 3.2 SP1... (See attachment) (CSM, 3.1.1 incorrect version is not compatible with this service pack version) I need to make my MCS 3.2 server to be able to support me JOINT-2 sensors to version 6.1

  Thank you

  Update to 3.1.1 to 3.2 level, then put on 3.2 SP1.