Redundancy check cyclic trying to access Western Digital hard drive

Similar Questions

• Western Digital hard drive

  I have a Western Digital hard drive. 500 GB capacity. The other day I went to plug it in, and my computer said I had to format the drive in order to to use. I would like to know if there is a way to get access to the content on my drive without formatting, and therefore lose all my data. Maybe there is some software that I can get to fix this problem.

  Hello

  
  1. what version of windows are you using?
  2 have you tried to connect the hard drive to another computer?
   
  Test the Hard drive on another computer, if it works, try to save the data and then format the hard disk.

  Try to do a Chkdsk Scan. The scan will look bad system files and will attempt to fix them, if possible.

  (a) click the Start button.
  (b) type cmd in search results.
  (c) click the cmd file and select "Run as Administrator".
  (d) in the CMD window, type chkdsk /f /r and press the Enter key.

  Note: Chkdsk /f /r enables chkdsk check the volume for errors bad sectors on the physical disk and file system. Chkdsk /f /r schedules itself to run at the next system reboot, by adding an entry in the BootExecute value.

  If the above steps fail, you may need to contact the manufacturer for assistance:
  http://support.wdc.com/

• HP Pavilion p6280t PC: Western Digital hard drive Compatible for HP Pavilion p6280t desktop PC

  I need to replace the internal hard disk for this old model of PC.  It came with a hard drive from 750 GB 7200 RPM SATA 3 Gb/s (Seagate).  What drive Western Digital hard (750 GB or 1 TB) is compatible with this computer?

  The limitation of SATA is more like a heading of speed that allows the bus. (6 Gb/s) SATAIII allows real world speeds of up to 600 MB/s while SATAII (3 Gbps) allows speeds of up to Bot 300 Mbps connections. allowing speeds of over the current maximum capacity of any mechanical hard drive. Best performing discs can go up to 200 MB/s, so it wouldn't really matter if you use SATAII or SATAIII. You should be fine using either for the WD Black and you shouldn't see any difference in transfer speeds.

  Captain_WD.

• "Access denied" error XP trying to access an external hard drive used on Windows 7

  Hello

  I used my external hard drive as usual on my XP machine for months, but yesterday I had to use it on another computer running Windows 7. Windows 7 asked something like "do you want to enable access to this hard drive?" and I clicked Yes thinking that it wouldn't cause any problems (showed a green bar that drains into the upper part of the window), but now that I'm trying to use it again on my XP machine I get an access denied error such as permissions changed. I just installed service pack 3, but which did not help.

  Help it would be greatly appreciated the fixing, I'm happy to just continue to use the external drive on my XP machine - use it on other Windows 7 machine was just one time.

  Thank you!

  Simon

  This should help: How is ownership of a file or a folder in Windows XP .

  Boulder computer Maven
  Most Microsoft Valuable Professional

• Vista x 64 does not recognize my external Western Digital hard drive

  I connected an external hard drive Western Digital, and I do not see that it is recognized in all USB ports.  I checked Device Manager and nothing shows here either.

  Western Digital website says this is a result of a damaged or outdated driver, but I could not find the driver.

  How to find the right driver to properly discover the hard drive.

  An old XP machine should recognize the drive, it doesn't require specific drivers. Be sure that you're using a good cable. Early symptom of a defective cable include inrmitent detenction of the reader. Or the hard drive is faulty, try to open the case and look for loose connections.

• My imac does not recognize my new western digital hard drive internal that I just installed.

  I created a bootable usb key with yosemite on this and I am trying to format the new HDD, but all options are grey and doesn't let me do anything. It is also said he has 0 KB and the hard drive is 2 TB. Ran a few commands on the terminal, I found online, and it said me that I have a usb key where I yosemite. Any ideas?

  Using disk utility you need to divide the hard drive by using the GUID partition scheme, and then Mac OS Extended journaled. If the disc is not recognized at all, you've probably done something wrong, have a bad SATA cable or a new defective hard disk.

• Tries to access an external hard drive get the error "system error 1130 has occurred."

  I have an old box with Windows XP Professional SP3 installed that I use as a file server. I installed a 2 TB external hard drive and set a couple of actions on it. Everything worked fine until 2 weeks ago when I lorsque je pouvais pouvais join is no longer to the actions of one other machines of the network: whenever I tried, I got:

  1130 system error has occurred.

  Not enough server storage is available to process this command.

  I installed the additional memory (now 2 GB), nothing helps.

  The really strange thing is: I can set and use actions on the C drive (a small disc 40 GB, only containing the operating system). but actions on the external drive D (the big disk) do not work.

  Someone has an idea?

  Hi levensnevel,

  Follow the steps to solve the problem:

  a. click Start, click run, type regedit and then click OK.

  b. look for, and then click the following registry subkey:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters

  c. click Edit, point to newand then click DWORD value.

  d. Type IRPStackSize, and then press ENTER to name the value.

  Note Type IRPStackSize exactly as it is displayed. The value name is case-sensitive.

  e. click Editand then click Edit.

  f. in the value data box, type the appropriate value for the network, and then click OK.

  If the problem persists after you complete this procedure, increase the value of IRPStackSize even more.

  Registry change warning

   

  Important Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756/

• Western Digital hard drive WD400BB - 00dga0... Internal hard drive 40 GB

  I am desperately looking for a driver for this drive. He was fully fuctional, when it has been removed with the program "kill the disc.

  I am wanting to put on my computer of children while they do their school work, but I'm having no luck - & cannot afford another computer or repairs.

  The machine on command prompt go to the bios, where it is NOT recognized. All straps, wiring checked everything... & works very well with others.

  Can some 1 send me the website or a driver bootable file in the email?  Thanks loads for your support-1st time here!

  * E-mail address is removed from the privacy * tks, bruce

  If the BIOS does not recognize the drive, there is no software or drivers that will make the drive work.  You know why BIOS does not see the drive, once that he only then the rest will be fine.

• Tecra M11 has a trap door for access to the hard drive?

  Can someone tell me if the Tecra M11 is equipped with a door to provide access to the hard drive?

  Previous Tecras have such a door, but I can't say for some photos of the site Web or the M11 manual if this still applies. I need to know before ordering.

  Thanks in advance for any help.

  Hello

  I put t know what you mean exactly. hatch giving access to the disk hard but the notebooks THAT HDD is placed at the bottom of the unit.
  You can easily remove the cover that secures the HARD drive Bay to get access to the internal HARD drive

  Welcome them

• I am able to access my desktop to my laptop as part of a homegroup, but can not access the external hard drive that is attached to my office.

  share external hard drive

  I am able to access my desktop to my laptop as part of a homegroup, but can not access the external hard drive that is attached to my office. I want to be able to back up my laptop hard disk external.  Advice please.

  geraintjo

  I do not use homegroups, but 'true' to share, so I don't know how this is supposed to work with homegroups. But usually he should share a drive or folder, first before you can access it from another machine. (for example, click on the drive/folder properties and go to the sharing tab)

• When it transfers data to the microcomputer by Uart, USB etc PC, it must either be aware access to the hard drive of the PC or not?

  I want to know when it transfers data to the microcomputer by Uart PC, USB etc., it must either be aware access to the hard drive of the PC or not.
  When the Windows operating system run my programs, hard drive is accessible when there is a space of memory?
  For example, virtual memory method return page-by-page, page-out using the drive hard when memory is used in full.
  I am using Windows 7 Home Premium 64-bit. The access to my PC hard drive light flashes even though I don't run my program.

  The lamp for the drive starts flashing as the computer is running and programs are running. Windows is a program that runs all the time and access the hard disk.

• How can I access my old hard drive?

  How can I access my old hard drive? I go to disk management to initialize it and indicates an error "the server cannot find the file specified" and the other says there is a problem with inputs and outputs. Any suggestions or help?

  If the player has not been recognized in the old PC he failed.

  Try this disc HD decision-makers audit utility to test, see what that brings

• Western digital external drive not recognized in windows 7

  Hello

  I bought a new external hard drive (elements Western digital 1 TB) and my laptop is also new (windows 7).

  When I connect my external hard drive, its getting detected in the bottom right of the machine by displaying a small icon. considering that, the external hard drive is not displayed in my computer.

  In disk management, his appears as Disk1, on right click on it, getting only "convert the dynamic disk' and 'Properties' are enabled.

  In disk management, in the list of volumes, 5 empty volumes are also there. Right click on these only "Delete Volume" is enabled. "Change drive letter and paths" is disabled.

  Please help me solve this problem.

  Thank you.

  Yo!

  A bit of a ball in the twilight. I'm wondering is someone else had this unit, tried to change the way it has been implemented and "messed up." I would take this one back and get another - especially if you got it in one of the "big box" stores If you're inclined to try to fix it, be aware that this may affect your ability ot return it for Exchange or credit. Depends the seller policies.

  Right mouse click have the drive in the list to see the options. If they are correctly set, it may be possible to simply assign a drive letter to each volume of 'empty' If this configuration is OK with you.

  Otherwise, the fix would involve will use the facilities of disc to remove the present volumes, and then creating one or more. Make sure that you choose to format the logical disks as and assign it a drive letter. See the Windows Help system.

  Let us know.

  Tom

• Why my system windows xp home does not recognize my drive external western digital hard?

  When I plug the external hard drive Western Digital 500 GB on the USB port, I get a message that the device is not recognized. When I contacted the manufacturer of the external hard drive their tech support had me try the device on another computer and it worked fine. They suggested that I needed to fix my version of Windows XP. I don't want to reinstall the OS I'm losing all files and data. What should I do?

  See if any the following assistance:

  "A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive"
    <>http://support.Microsoft.com/kb/925196 >

  "Why does my computer detect my new USB device when I running Windows XP or Windows Server 2003?"
    <>http://support.Microsoft.com/kb/314634 >

  HTH,
  JW

• java.lang.IllegalAccessError: tried to access class oracle.jdbc.driver.Orac

  Hello world
  
  I have a problem with ojdbc14.jar is.
  My request, which is a J2EE (JSP) application, grows on JDeveloper 10.1.3.3 and works correctly. But I can't run my application on JDev 11.1.1.0.1.
  The problem is (I think) I can access at design time ojdbc.jar, but in the moment of execution, JDeveloper gives me below the exception when I press the run button.
  
  
  Error 500 - Internal server error
  
  java.lang.IllegalAccessError: tried to access class class oracle.jdbc.driver.OraclePreparedStatement UtilityPack.DBPack.TPreparedStatement
  to UtilityPack.DBPack.TPreparedStatement. (TPreparedStatement.java:72) (== > > tihis is my class)
  at UtilityPack.HCombos.fillCombos (HCombos.java:59)
  at jsp_servlet.__index._jspService(__index.java:158)
  at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
  to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:227)
  at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
  at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
  at weblogic.servlet.internal.ServletStubImpl.onAddToMapException(ServletStubImpl.java:408)
  at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:318)
  at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3498)
  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
  at weblogic.security.service.SecurityManager.runAs (unknown Source)
  at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2180)
  at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2086)
  at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
  
  Could you please help? You have an idea? I tried, but I couldn't find the problem.
  Everything would be great.
  
  Thanks in advance.

  And you can read this.

  http://forums.Oracle.com/forums/Ann.jspa?annID=201

  Sascha